ABAP WebDynpro Problem

I want to develop a small application in ABAP WebDynpro like------
1>it takes the name of a DDIC table as input and then displays the data as a tabular form
2>If I modify the data in the displayed table and then press the save button the data will be updated and saved in the DDIC transparent table
I have reached upto 1 but can't proceed towards 2 . Can anybody help me?

Hi,
Try to create a button named 'MODIFY'/'SAVE'. try to get the name of the field and it's you are trying to modify.
based on this write a UPDATE or MODIFY query to have this value being changed.
You can get the value by reading the context.
Regards
Lekha.

Similar Messages

Problem in retriving workitem id from uwl in abap webdynpro

Hello,
Curently, I've a problem similar with this post : Problem in retriving workitem id from uwl in abap webdynpro
But unfortunatelly there is no answer :/
I've followed this tutorial : http://wiki.sdn.sap.com/wiki/display/WDABAP/IntegratingWebDynproABAPapplicationswithUWLforworkflowin+Portal
And I have a problem in my WD Abap. The WI_ID field is empty (initial).
Here is my XML :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE UWLConfiguration PUBLIC '-//SAP//UWL1.0//EN' 'uwl_configuration.dtd'
>
<UWLConfiguration version="1.0">
     <ItemTypes>
          <ItemType name="uwl.task.webflow.TS90000087.ED1CLNT100" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
            <ItemTypeCriteria systemId="ED1CLNT100" externalType="TS90000087" connector="WebFlowConnector"/>
            <Actions>
               <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
                 <Properties>
                    <Property name="WebDynproApplication" value="zps_pnpi"/>
                    <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                    <Property name="DynamicParameter" value="WI_ID1=${item.externalId}"/>
                    <Property name="openInNewWindow" value="yes"/>
                    <Property name="WebDynproNamespace" value="sap"/>
                    <Property name="System" value="ED1CLNT100"/>
                    <Property name="display_order_priority" value="5"/>
                 </Properties>
                 <Descriptions default=""/>
               </Action>
            </Actions>
          </ItemType>
     </ItemTypes>
</UWLConfiguration>
Here are the parameter defined in my application :
WI_ID     000000000000     SWW_WIID
WI_ID1     ${item.externalId}     STRING
And, i've made the test with both the WI_ID and the WI_ID1 in the XML but everytime, no value at all.
Could you please help me ? It's been three days I'm looking for a solution to get my Workitem ID in my Webdynpro ...

In fact, it's quite strange, I added the menu and toolbar display and I can see that my url contains the data ...
http://<begin_of_the_url>DynamicParameter=System%3DED1CLNT100%26wi_id%3D000000629442%26WI_ID%3D000000629442%26WI_ID1%3D000000629442<end_of_the_url>
So ... how is it possible ?
And the next question, how can I get the full url so I can parse it myself ?

ABAP WebDynpro iView with window id problem

We have a custom ABAP webdynpro iView that is part of a dynamic navigation. When the iView loads the following warning message is displayed...
An error occured while starting the iView.
Application
https://<server>/sap/bc/webdynpro/sap/WebDynproComponent/;sap-ext-sid=J2IlkGCm4WYvxnfaQC8bVgY0oAX5DVVY3z_8GGDYcLow
will run with wrong client window ID!
Do not continue; please report this problem to your system administrator.
Once you click 'Ok' on the warning message....the webdynpro iView is displayed.
How do you not have the message display?
Thanks.

If the user is using link from favourites of browser, Ask him to delete it and manually enter the url and Try.
In my case, The user just deleted the saved link from Favorites and tried entering the url manually,
though it is weird it worked.
or else try these Notes 1450543, 1171930 .

Zci type ADOBE Interactive Form in ABAP Webdynpro short dump

Adobe Reader version 8.1.2
Life Cycle Designer version 7.1.4270.1.421766
ECC 6.0 patch 13
When I ran the 'FP_PDF_TEST_00' , it shows
Version Information: 710.20061024154505.342190
In my ABAP Webdynpro app., it has 3 inputfields.
In the Form layout, I changed the form layout type to 'ZCI' for interactive form, and Insert the WebDynpro Script.
And in the ABAP Webdynpro view layput designer, I enabled the pdf form element.
All objects compiled without any problem.
During the runtime, it got the following short dump:
21 METHOD       CX_WD_GENERAL=================CP    CX_WD_GENERAL=================CM003     5
    CX_WD_GENERAL=>RAISE
20 METHOD       CL_WD_ADOBE_SERVICES==========CP    CL_WD_ADOBE_SERVICES==========CM008   193
    CL_WD_ADOBE_SERVICES=>CREATE_PDF
19 METHOD       /1WDA/LADOBE==================CP    /1WDA/LADOBE==================CCIMP 1955
    CL_INTERACTIVE_FORM_ZCI=>IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT
Our BASIS sent me the ADS trace:
SAP Interactive Forms by Adobe
Render Error Report
'pdf' Log Entries
restoreState is not a valid attribute of subform, Attribute not loaded. Line 5.
Invalid node type: dataGroup
The fault occurred on line 0.
The SOM expression '$record.BAPIBNAME' for the dataRef specified on field 'BAPIBNAME', resolved to an incompatible node type of 'dataGroup'.
Any comment or advise?

Hi,
As far as i know when you use Adobe forms in a WD4A application, language is your "web" connection language.
You can have a look at standard class CL_WD_ADOBE_SERVICE, it's used when generating an adobe forms from WD4A. , more particulary look at method DETERMINE_DOCPARAMS.
regards

Deleting row from table in ABAP webdynpro

Hi all,
Can anyone help me regarding deletion of a row from a table in ABAP webdynpro.
I have written a code like this :
    DATA:
      NODE_STUDINFOSYS                    TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_STUDINFOSYS                    TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_STUDINFOSYS                    TYPE IF_COMPONENTCONTROLLER=>ELEMENT_STUDINFOSYS .
navigate from <CONTEXT> to <STUDINFOSYS> via lead selection
    NODE_STUDINFOSYS = WD_CONTEXT->GET_CHILD_NODE( NAME = IF_COMPONENTCONTROLLER=>WDCTX_STUDINFOSYS ).
get element via lead selection
    ELEM_STUDINFOSYS = NODE_STUDINFOSYS->GET_ELEMENT( ).
deleting data selected via lead selection
    NODE_STUDINFOSYS->REMOVE_ELEMENT( ELEMENT = ELEM_STUDINFOSYS ).
*But I am getting an error:*
Error when processing your request
What has happened?
The URL http://hsdnt24s11.hclt.corp.hcl.in:8000/sap/bc/webdynpro/sap/znet310_add_del_sech/ was not called due to an error.
Note
The following error text was processed in the system HE6 : The lead selection has not been set. VIEW_ADD_DEL_01
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
Method: PATH_TABLE_GET_ELEMENT2 of program CL_WDR_CONTEXT_NODE===========CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HE6 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server hsdnt24s11_HE6_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server hsdnt24s11_HE6_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: SUMANK -l: E -s: HE6 -i: hsdnt24s11_HE6_00 -w: 0 -d: 20081220 -t: 155832 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Can anyone help me???

Hi Suman,
this issue seems to be not specific to the FPM. I would like to suggest you to address this problem in the ABAP forum.
Best regards,
Thomas

ABAP Webdynpro Development - Script Error when Accessing Visual Elements

I am encountering a strange error at my client . I can't use the Abap Webdynpro visual elements to build views .
To reproduce the error :
- T-code SE80
- Open up any ABAP webdynpro component .
- Open up one of the view and go on Tab Layout .
Normal Screen : You would see many WYSIWYG items ( buttons, radiobutton , text elements etcu2026. ) at the left side u2026 these elements are used to build the view .
Here : No elements displayed and when we click on that area we get an error .
Instead of the elements to get displayed .. lines are displayed and when you try to open up ( click ) the lines , an internet explorer script error stating the following occurs ( although the abap wendynpro is edited in SAP Gui ) :
An Error has occured in the script on this page .
Line : 1
Char : 25
Error : Object Required
Code: 0
URL : http://hdrerpdev05.bchydro.bc.ca:8100/sap/bc/wdvd/toolbar.html?_vdrespkey=4KE8FGJO3P88DO8K5XCEYHTEA&_vdframe=toolbar&usedynp=&usepat=&sap-client=100
Anybody had had the same kind of error before ^^????
Thanks and Best Regards !

Hi,
we are getting the some what related errors in SE80 -> Web Dynpro Layout
An Error has occured in the script on this page .
Line : 1
Char : 1
Error : Object Expected
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd/painting.html?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=painting&sap-client=230
An Error has occured in the script on this page .
Line : 110
Char : 2
Error : Could not complete the operation due to error 80020101
Code: 0
URL : http://<FQDN>:8000/sap/bc/wdvd?_vdrespkey=4KZ4LYLFQA2I7X53H3CRICKFC&_vdframe=no_add_ui_lib&sap-client=230
Recently, we have upgraded our ERP system (SAP ECC 6.0 SPS17) with EHP4 SPS8. SAP_BASIS and SAP_ABA patch level same on 701_0008.
FQDN is mantianed at icm/host_name_full parameter in system as well as in /etc/hosts file with associated system IP address.
As suggested by Ted Dinh, we do not find any duplicate MIME files in our MIME Repository (SE80) and we cleared/invalidated ICM cache many times in problem analysis.
As suggested by Thierno Diarra , in our affected system domain WDY_MD_UI_ELEMENT_CATEGORY is well maintained in value ranges.
We have raised SAP OSS Message for the same, they told us to check dns server connectivity/settings with the affected system. we did the suggested DNS settings in affected system. But still the same error message is occuring. They have suggested same sap notes like #979039 and #1009930 & #1483210 , but all the corrections/suggections/SICF service status as mentioned, are found OK in our system.
Regards,
Bhavik G. Shroff

Abap webdynpro layout and application not displayed

Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
                1) Layout of ABAP Webdynpro Component are not displayed .
                2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
      If any one have information for this kindly let me know .
Thanks :
Vishwas
Edited by: vishwassap on Aug 12, 2010 7:17 AM

Hi,
   Thanks for reply ,
   Above mention is not link ,its an error in pop up inside layout of view .
I resolve this problem by deploying mime object by program in R/3 , so that i can able to view layout .
But still application is not displayed it shows error like
1) 'UCF_LoadingPlaceHolder' is undefinged by testing through R/3 and starting view is not opened .
2) 'UCF_Image' is undefined by testing through portal but starting view is opened here .
3) while navigating from one view to any view or window is not possible , it gives error
4) When I navigate from one view to other .
The following error text was processed in the system D36 : The ASSERT condition was violated.
The error occurred on the application server RELSRMSR2_D36_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: DISPATCH_NW7_EVENT of program CL_NW7_VIEW_ELEMENT_ADAPTER===CP
Method: IF_WDR_CLIENT~GET_CLIENT_UPDATES of program CL_WDR_CLIENT_SSR_LS==========CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Edited by: vishwassap on Aug 13, 2010 8:31 AM

ABAP webdynpro app not redirecting using Outbound plug in portal

Scenario-
There is one Abap webdynpro application APP1 calling another abap webdynpro component Comp 2 through outbound plug on a button click. This is working fine if service is tested independantly.
SAP ECC system is having a webispatcher and the application should be accessed using webdipatcher only i.e. ECC should not be called directly.
SSL has been configured b/w ECC and webdipatcher.
The Abap webdynpro application APP1 is integrated into portal using Abap webdynpro iview.
Setting in Portal system are reffering to Webdipatcher for ECC system instead of ECC system directly.
Issue-
App1 is loading successfully into portal and all the data is coming properly but when trying to navigate to second component on button click it is not navigating. iview is getting refreshed but not redirecting to required component and is still on the same application.
Please suggest the reasons and solutions if anyone has clue about it.
Regards
Deepak

Hi,
Please refer to these links -
How to secure WDA over an external facing portal
WebDynpro ABAP and Portal Navigation
WebDynpro ABAP and Portal Navigation problem
Please check for the portal eventing between the applications.
Regards,
Lekha

How to create interactive forms in ABAP WebDynpro

Hi Experts,
we are trying to create our first interactive form with the "how to guide for ABAP WebDynpros".
Unfortunatelly we have a big problem on Step 17, where we want to save the created WebDynpro Application. After safing the system shows a pop up with following error message:
"you are not authorized to use function - Netzwerkadministration". Although we have all the necessary access rights in the system (ERP/Developer User).
But if we go on and create a service call (it's a guided procedure) for an existing BAPI, we can't select the function module interface parameters that we want to add to the context via checkboxes. There are no checkboxes available. but the how-to-guides shows checkboxes.
is maybe the first error the reason that we can't select the function modules? Please help. If you need the how-to-guide, please give me your eMail and I will provide it to you immediately.
Thank you very much in advance and regards,
H.-J. Kersten

Hello
I got the same problem when i try to create WD ABAP application.
Did you find the solution?
Regards
Nir

How to read URL Parameters in ABAP WebDynpro ?

Hi,
How and where (which class, method) in ABAP WebDynpro we can read URL Parameters ? I found answers for WebDynpro JAVA but nothing for ABAP.
Thanks
Meenal

Hi Meenal,
Please see a post by Sanjay Agarwal titled 'Sequencing Problem in Web Dynpro ABAP'. I believe you will find your answer there.
Cheers,
Rich

Error occured while showing adobe form in abap webdynpro application

Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP

Hi Arjun ,
            Thanx for ur reply ,
            i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
        and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
       if m_version is initial.
88
         m_version = m_pdf_object->get_version_info( ).
89
       endif.
90
       if version < ''.
91
         set_usage_rights( m_pdf_object ).
92
       endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
      set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
      execute, call ADS
104
m_pdf_object->execute( ).
105
106
      get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
|    imported into interactive forms.(201501).

Display Word Document in ABAP WebDynpro

Hi All,
We have a number of word documents stored in the Business Document Navigator (Transaction OAOR) that we would like to display within a simple ABAP WebDynpro. Demo program SAPRDEMO_FORM_INTERFACE shows how to retrieve a document from BDS via class cl_bds_document_set. However, I am not seeing a similiar program for ABAP Web Dynpro.
I was hoping that WebDynpro test application IOS_TEST_SIMPLE_MS would do the trick; however that appears to only work for a MIME repository object. Is there a way to display these documents through ABAP WebDynpro? Can anyone point me to a sample program? Thanks.
John

Hi John
Have a look at this thread [ Approach content repository other way then URL approach |Re: Approach content repository other way then URL approach;.
Thomas Jung delivers some (as always) excellent answers to a very similar problem. If the document is in DMS or BDS really doesn't matter so if I were you I would follow the "cached response" path.
Also, do a google-search for -- abap "cached response" -- and you will find some additional links here (Thomas has even more to offer...).
If you do follow this path please share some details as a follow up in this thread for the benefit of the community at large.
Regards, Johan

Display Smartform Pdf output in ABAP Webdynpro application

Hello,
there is a solution for displaying Smartform output in Java Webdynpro application in this forum. Since i want to start an project in ABAP Webdynpro i need a solution for this technology since i don't want to recreate all the paperwork again using Adobe. Is there any solution available?
Thanks
Udo Ahle

Hello,
this is the solution which i was able to implement using the hints given by Heidi and Thomas. Thank you for the support. With this solution it is possible to reuse oldstyle sapscripts and smartforms in todays environment. Here is the sample code which solves the problem:
In WDA you define for example a pushbutton to start the display of the PDF.
In the onaction method you implement:
method ONACTIONSHOW_PDF .
data LX_pdf type xstring.
* get PDF from existing sapscript or smatform
call function 'Y_PDF_GET' destination '46c'
    IMPORTING
      ex_PDF = LX_PDF.
* append the pdf to the response
cl_wd_runtime_services=>attach_file_to_response(
    i_filename = 'Hello.PDF'
    i_content   = lx_pdf
    i_mime_type = 'application/pdf'
    i_in_new_window = 'X'
    i_inplace       = 'X' ).
endmethod.
The function 'Y_PDF_GET' is implemented as follows:
FUNCTION Y_PDF_GET .
*"*"Local interface:
*" EXPORTING
*"     VALUE(EX_PDF) TYPE XSTRING
*" TABLES
*"      ET_OTF STRUCTURE ITCOO OPTIONAL
data: lf_filesize type i,
        lt_otf type table of ITCOO,
        lt_lines type table of tline,
        tline type tline.
* start sapscript or smatforms and return
perform make_otf.
CALL FUNCTION 'READ_OTF_FROM_MEMORY'
    TABLES
      OTF                = lt_otf
   EXCEPTIONS
     MEMORY_EMPTY       = 1
     OTHERS             = 2
et_otf[] = lt_otf.
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     FORMAT                      = 'PDF'
*   MAX_LINEWIDTH               = 132
*   ARCHIVE_INDEX               = ' '
   IMPORTING
     BIN_FILESIZE                = lf_filesize
    TABLES
      OTF                         = lt_otf
      LINES                       = lt_lines
   EXCEPTIONS
     ERR_MAX_LINEWIDTH           = 1
     ERR_FORMAT                  = 2
     ERR_CONV_NOT_POSSIBLE       = 3
     OTHERS                      = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* convert tline to xstring as needed in
* in web dynpro
field-symbols <X>.
data: st(268) type c.
data l1 type i.
data len type i.
data maxline type i value 134.
l1 = 0.
loop AT lt_lines INTO tline.
    clear st.
    st+l1(maxline) = tline.
    len = maxline + l1.
    l1 = maxline - strlen( tline ).
    ASSIGN st TO <x> TYPE 'X'.
    CONCATENATE ex_pdf <x>(len) INTO ex_pdf.
endloop.
ENDFUNCTION.
The make_otf for sapscript is the following:
* the next attribute enables the otf output.
* no other output will be generated
<b>options-TDGETOTF = 'X'</b>
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
*         APPLICATION        = 'TX'
*         ARCHIVE_INDEX      = ARCHIVE_INDEX
         ARCHIVE_PARAMS     = ARCHIVE_PARAMS
            DEVICE             = DEVICE
            DIALOG             = ' '
            FORM               = FORM
            LANGUAGE           = language
           OPTIONS            = OPTIONS
*     IMPORTING
*          LANGUAGE           =
*          NEW_ARCHIVE_PARAMS =
*          RESULT             =
       EXCEPTIONS
            CANCELED           = 1
            DEVICE             = 2
            FORM               = 3
            OPTIONS            = 4
            UNCLOSED           = 5
            OTHERS             = 6.
*... make some write forms
data lT_OTF     type table of     ITCOO.
* get the otf data
CALL FUNCTION 'CLOSE_FORM'
*     IMPORTING
*          RESULT   = result
       TABLES
           OTFDATA = lt_otf
       EXCEPTIONS
            UNOPENED = 1
            OTHERS   = 2.
* put otf into memory for later usage
if not lt_otf is initial.
    CALL FUNCTION 'SAVE_OTF_TO_MEMORY'
* EXPORTING
*   MEMORY_KEY       = 'DEF_OTF_MEMORY_KEY'
      TABLES
        OTF              = lt_otf.
endif.
For Smartforms technology it is possible to implement the same concept.

Travel management in ABAP-webdynpro(ECC-6.0)

Hi All,
I have a requirement in which the screens of travel management has to be designed in ABAP-webdynpro.
I know that screens are available in ESS-6.0 netweaver component but I want ABAP-webdynpro screens in ECC-6.0.
I was just curious to know if any standard ABAP webdynpro screens are available in ECC-6.0 for travel management.
Please revert back ASAP. Points will be awarded as per forum rule.
Regrads,
Guru

Hi All / Raynard,
Your answer was very useful.
We are trying to install SAP ECC 6.0 enhancement package 2 but we have some problem in the same as we are not able to find the same in sap marketplace. Can you please post me the direct link to download or any info regarding the Enhancement Package-2.
We have also version prior to ECC 6.0 . So can you please tell me how to look into the Java-webdynpro components those which are related to travel management.
Your ealiest answer will be much appriciable. I will be rewarding points according to forum rules.
Regards,
Guru

ABAP -WebDynpro - Read URL Parameter

Hi,
We have a Custom 'Catalog' that needs to be called from SRM using OCI (Open Catalog Interface). We are developing this custom catalog using ABAP Web Dynpro. We have following issues because of which we are unable to communicate back to Shopping cart from the Custom Catalog:
1. Unable to read the value of 'HOOK_URL' in WebDynpro application. We need this value so that it can be used as Exit URL. How and where do we read this URL parameter in ABAP WebDynpro ?
2. How can we return the 'HTML Form' to SRM with the values from Custom Catalog to fill the shopping cart ?
I would appreciate your help...
Thanks
Meenal

Hi Menal,
I had the same problem.
Did you define the HOOK_URL parameter in your webservice ? If not, do this 1st.
2nd
In you Webdynpro read the HOOK_URL in your handledefault method your window. Store it e.g. as attrribute in you assistance class.
method handledefault .
*&- Add FOF and HOOK_URL to assistanceclass attributes
wd_assist->hook_url = hook_url.
endmethod.
After this you can read your HOOK_URL e.g in a view via:
concatenate 'HOOK_URL=' wd_assist->hook_url zlv_hook_url into zlv_hook_url
I hope your question is answered.
What I want to now is: How to controll the HOOK_URL so that the formfields of the extenal catalog is added to the shopping card. Do you now that ?
John

ABAP WebDynpro Problem

Similar Messages

Maybe you are looking for