About CATS attachment

Hi gurus,
I am having a problem with the CATS approval workflow.When clicking on the attachment of  the workflow we are getting a short dump.
Short text
Program error: ASSIGN with length 0 in program "SAPLSWOT".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSWOT" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Tried to create a field with length 0. This is not
possible.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
In an ASSIGN statement in the program "SAPLSWOT" a field symbol with
length 0 should have been created. However, this is not possible.
length 0.
This is not possible.
How to correct the error
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSIGN_LENGTH_0" " "
"SAPLSWOT" or "LSWOTU02"
"SWO_DIALOG_OBJECT_KEY_EDIT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "mednswn014"
Network address...... "192.168.1.114"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "MEDNSWN014"
Database type..... "MSSQL"
Database name..... "ECD"
Database user ID.. "ecd"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jan 29 2007 00:36:16"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 95
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 16384
MM Used. 1700672
MM Free. 2486544
User and Transaction
Client.............. 111
User................ "T_MGR_2"
Language key........ "E"
Transaction......... "SWO_ASYNC "
Program............. "SAPLSWOT"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "SAPLSWOT" - in
"SWO_DIALOG_OBJECT_KEY_EDIT".
The main program was "SWO_CALL_METHOD_ASYNC ".
In the source code you have the termination point in line 68
of the (Include) program "LSWOTU02".
we are using the workflow
TS20000460.
It's very urgent.

Hi experts,
I had the same problem with standard object BUS2028 (Material Inventory).
I re-generated the object in development system in SWO1 transaction and the problem got solved (in development system). But the issue is that the client has MANY systems, and I dont think I will be able to re-generate in all systems, specially in productive system....
I was not asked for any transport request when re-generating.... How can I get the "re-generation" moved to other systems? Is there any way to include a standard business object in a transport request? or howelse?
I've also been looking for some OSS note for this but didn't find anything....
Hope you can help me!
Thanks,
Daniela

Similar Messages

  • Problem about mail attachment

    Hi all:
        I use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to create a html attachment,it contains some Chinese words.
        The issue is after I export the attachment from Business Workplace ,I found the Chinese words is disordered. I mean the exported file do not contain any Chinese words.
        Is there anybody can help me to sole the problem?
        Regards

    Thanks for your reply,I think I don't explain it clearlly.
    In SAP GUI,the attachment shows the Chinese word correctlly,but in PC-UI ,it has the problem.
    I suppose the problem is about the codepage,but I've no idea how to solve it.

  • Query about scsi-attach

    Hi,
    I am trying to make scsi devices from OVM 3.0 server visible to RHEL guest "as SCSI".
    I executed 'xm scsi-attach' command to bind scsi device to a domain
    xm scsi-attach 0004fb0000060000e36116a4c0038eab /dev/sdl 4:0:1:0
    However, after executing this command, I dont see any new disk in the virtual machine 0004fb0000060000e36116a4c0038eab .
    Do I need to add entry manually to vm.cfg ? syntax ?
    Once the virtual machine is restarted, xm scsi-list 0004fb0000060000e36116a4c0038eab does not show scsi attached devices anymore.
    Also please let me know if there is a document describing the steps to make scsi disks visible as scsi to the guest.
    Thanks,
    kiran

    Hi Avi,
    I assigned 4 virtual disks of size 1 GB each to virtual machine named vm as shown below
    [root@vm ~]# fdisk -l
    Disk /dev/hdb: 16.1 GB, 16106127360 bytes
    255 heads, 63 sectors/track, 1958 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/hdb1 * 1 13 104391 83 Linux
    /dev/hdb2 14 1958 15623212+ 8e Linux LVM
    Disk /dev/hdc: 1000 MB, 1000000000 bytes <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    Disk /dev/hdd: 1000 MB, 1000000000 bytes <<<<<<<<<<<<<<<<<<<<<<<<<<<<
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/hdd doesn't contain a valid partition table
    Disk /dev/xvda: 3834 MB, 3834736640 bytes
    255 heads, 63 sectors/track, 466 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/xvda doesn't contain a valid partition table
    Disk /dev/xvdb: 16.1 GB, 16106127360 bytes
    255 heads, 63 sectors/track, 1958 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/xvdb1 * 1 13 104391 83 Linux
    /dev/xvdb2 14 1958 15623212+ 8e Linux LVM
    Disk /dev/xvdc: 1000 MB, 1000000000 bytes
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    Disk /dev/xvdd: 1000 MB, 1000000000 bytes
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/xvdd doesn't contain a valid partition table
    Disk /dev/xvde: 1000 MB, 1000000000 bytes <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/xvde doesn't contain a valid partition table
    Disk /dev/xvdf: 1000 MB, 1000000000 bytes <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
    255 heads, 63 sectors/track, 121 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk /dev/xvdf doesn't contain a valid partition table
    However, they are still shown as xvd devices. I tried executing scsi commands but they failed with error indicating that the device is not scsi device.
    Also,
    [root@vm ~]# cat /proc/scsi/sg/devices // shows no entries
    Any suggesstions on whats wrong ?
    Thanks,
    kiran

  • Everything about CATS

    < MODERATOR:  All points have been UNASSIGNED and the message locked.  Please do not share email addresses, documents, or links to copyrighted or company confidential information on these forums. >
    Can you please explain me everything related to CATS.
    From the start like
    1)Before making the AS_IS doc what all information i should know
    2) how to make an AS-IS doc for CATS
    3) what type of questions i have to cover in AS-IS Doc for CATS
    4) what does sap implementation concile means
    5) Configuration of CATS
    6) what all information i have to consider when i am implementation cats
    can anybody tell me everything about CATS

    Hi,
    I am working on the CATS.
    Do you got the answer for your questions?
    I have some docs on this.
    yogesh.deshmukh81 at gmail

  • About CATS

    Hello Experts!
    I have some very urgent queries. I would appreciate if you could please update me with those. My queries are as follows:
    1. How can I access the gap in functionality of 4.7 to ECC 6.0 ?
    2.what are existing user exits/modifications of CATs timesheet and how can we determine their portability to the web enabled version?
    3. where can I learn about regression test scripts for timesheet functionality? or if you could give me some idea about it.
    Thank you all in advance!
    Regards,
    Mamta

    Hello Experts!
    I have some very urgent queries. I would appreciate if you could please update me with those. My queries are as follows:
    1. How can I access the gap in functionality of 4.7 to ECC 6.0 ?
    2.what are existing user exits/modifications of CATs timesheet and how can we determine their portability to the web enabled version?
    3. where can I learn about regression test scripts for timesheet functionality? or if you could give me some idea about it.
    Thank you all in advance!
    Regards,
    Mamta

  • How to get information about BBP_PDATT (attached document)

    Hello
    I'm writing a function module, and i want to get the attached document of a purchase order. I know the function module BBP_PD_PO_GETDETAIL gets this information but it is too long for me and i just need attached document. I found the Function module BBP_PDATT_GETDETAIL but i have the impression that it is not possible to execute it alone, it dumps.
    And i can't find links between crmd_orderadm_h and BBP_PDATT.
    Thank you for your help.
    Peggy.

    The link is this one:
    pj of header
          SELECT COUNT(*)
          INTO l_nbr_occur
          FROM bbp_pdatt
          INNER JOIN crmd_link
          ON bbp_pdattset_guid = crmd_linkguid_set
          WHERE objtype_set = '33'
          AND crmd_link~guid_hi = et_pdlist-guid
          AND del_ind NE 'X'
          AND internal_ind NE 'X'.
    pj of items
          SELECT guid
          APPENDING TABLE lt_guid_i
          FROM crmd_orderadm_i
          WHERE parent EQ et_pdlist-guid.
          LOOP AT lt_guid_i INTO l_guid_i.
            SELECT COUNT(*)
            INTO l_nbr_occur2
            FROM bbp_pdatt
            INNER JOIN crmd_link
            ON bbp_pdattset_guid = crmd_linkguid_set
            WHERE objtype_set = '33'
            AND crmd_link~guid_hi = l_guid_i
            AND del_ind NE 'X'
            AND internal_ind NE 'X'.
          ENDLOOP.

  • [help]a problem about dbx/attach a tuxedo service

    I attempted to trace a Tuxedo service process via dbx/attach command:
    attach nnnnwhen I attached dbx to the service PID, the service process is stopped somewhere outside my service program:
    (/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) where
    current thread: t@1
    =>[1] __systemcall(0xffbfeda8, 0x31, 0x2, 0x10540c, 0x2cc0e8, 0x641dc), at 0xfe120080
      [2] _libc_msgrcv(0x10540c, 0x2cc0e8, 0x641dc, 0xc0000000, 0x0, 0x2ec), at 0xfe117928
      [3] msgrcv(0x10540c, 0x2cc0e8, 0x641dc, 0xc0000000, 0x0, 0x0), at 0xfe45dc40
      [4] _tmmbrecvm(0x0, 0xbdb0c, 0x2, 0xa, 0x0, 0x7), at 0xfe59b658
      [5] _tmmsgrcv(0xfffffffc, 0xfe5fdaa8, 0x0, 0xffff, 0xbf800, 0xb76c8), at 0xfe4bc1d0
      [6] _tmrcvrq(0xae608, 0xffbff38c, 0x22, 0x10000000, 0x1000, 0xc0000000), at 0xfe4f9738
      [7] _tmrunserver(0x0, 0x1400, 0x0, 0xfe5fdaa8, 0x0, 0xb76c8), at 0xfe4fe418
      [8] _tmstartserver(0x15, 0x1c00, 0x8b160, 0xae608, 0x0, 0x8af88), at 0xfe4d7530
      [9] main(0x15, 0xffbff4bc, 0xffbff514, 0x8b000, 0x0, 0x0), at 0x238f8However, I can not resume the service process either. when I use cont command, the dbx seems to stop there with no input prompt.
    Has anyone debug a tuxedo serive in SunOS using dbx?How can I resume the server process If I want to print the local variables?Thank you in advance!
    Edited by: angeloyu on Sep 16, 2008 8:02 PM

    angeloyu wrote:
    I attempted to trace a Tuxedo service process via dbx/attach command:
    attach nnnnwhen I attached dbx to the service PID, the service process is stopped somewhere outside my service program:
    (/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) where
    current thread: t@1
    [9] main(0x15, 0xffbff4bc, 0xffbff514, 0x8b000, 0x0, 0x0), at 0x238f8
    Judging by WS6U2 above, I assume you are using dbx 6.2, which is very, very old. Unless you need it to work on similarly old Solaris, please consider upgrading to Sun Studio 11 (supports Solaris 8) or Sun Studio 12 (supports Solaris 9+). Both are free and contain many improvements.
    angeloyu wrote:
    However, I can not resume the service process either. when I use cont command, the dbx seems to stop there with no input prompt.That's kind of expected behavior from the debugger - it resumes debuggee and sits there until debuggee generates some event (like hitting breakpoint or receiving a signal). Once dbx gets notified of this event, it presents details to the user and provides input prompt.
    Did you put any breakpoints in (with stop command)? You'll also need to make sure breakpoint is reached by that service you are debugging.
    Anyways, if all you need is to trace the service, it might be easier to use truss(1) command like this:
    $ truss -p `pgrep Tuxedo`

  • About Cat 3550 enable secret passworld

    Hello, everyone!
    this day, I tried to change of password about my Catalyst 3550 L2/L3 Swithes.
    but, I find out a problem.
    next is process my change of enable password.
    1. conf t
    2. enable password xxx
    3. ^z
    4. conf t
    5. enable secret xxx
    6. ^Z
    the end
    I tried to enable password after disable.
    but, I can't enter with changed password.
    I don't know why can't enter.
    Do you know this ?
    and how to setting enable secret pasword ?
    I would like know how to set-up enable secret password on cataylst 3550 switches.
    thank you.
    I will wait your answer.

    The enable secret will override any enable password that may be configured . Use one or the other and delete the one you aren't using . The enable secret is the preferred password due to md5 encryption and which can't be cracked by those nice little cisco password breakers they out everywhere .
    CONF T
    no enable password
    enable secret XXXXX

  • Details about Attachment in PO

    Hi Gurus,
    I attached the documents in to ME22N transaction by using a services for Object button on the left side corner of the screen. Now our EP consultant needs a BAPI to get the details about the attached document. Title of the document, Date of the document created and name of the creator.
    Please can any one tell me the BAPI to get the attched document details and also possible tell me how to use that.
    Thanks and Regards
    Abinava Siri...

    goto table SRGBTBREL
    give RELTYPE = ATTA
    INSTID_A = give ur pr no. with pre-attachement of 00
    get details and use them in function module GOS_ATTACHMENT_LIST_POPUP

  • Infos about attachment

    Hello,
    Which FM, method can I use to get information about the attachment of a business transaction.
    I would like to now the name of each attachment (file name) and the size of each attachment.
    Thanks in advance,
    Kind Regards,
    Frédéric

    Method GET_FILE_INFO
    Importing
    LOIO                   
    PHIO                   
    Exporting
    FILE_NAME              
    MIMETYPE               
    FILE_TYPE              
    FILE_SIZE              
    BAD_IOS                
    DOC_TYPE

  • What is it about this markup that breaks DW CS3 Design View Editing?

    Folks:
    I'm attaching very simple --and apparently completely valid-- markup that generates the text shown between the markers below:
    ------------start----------------
    yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda yadda badda.
    ------------end----------------
    As you can see by examining the file, it contains only an span enclosing text and spaces, and some following breaks.  This file passes DW validation: no errors or warnings.
    If I open this file in DW CS3 Design View, select and delete the last word, "badda", the entire text --every "yadda"--  is also deleted.  All that text is really gone -- if I immediately save the file and re-open it, there is no text content at all, just the span pair,  spaces, and the trailing breaks.  This is completely repeatable.
    When you edit this file, do you get the same result?
    The attached file is a cut-down, simplified version of a production file that exhibits this issue. (That file also passes validation.)   When I delete single  words,  entire content paragraphs disappear.   So this is not just a point of curiosity.  I need to figure out how to fix the production code and avoid this problem in the future.
    What is it about the attached markup that causes this issue?  I've fooled around with this code quite a bit and the best I can figure out is that DW is confused when both the start- and end- span tags are followed immediately by a line break.  Inserting a space in either place makes the issue go away.   But the production code doesn't have any occurances of this pattern. And, anyway, line-breaks have no significance to html, just for source-code formatting, right?
    Am I missing something incredibly obvious?
    TIA
    hen3ry

    Nancy O:
    Thank you for your response, which gave me  valuable clues to understanding the issues.   (Specifically, it led me to re-read and understand better the nitty-gritty of the HTML4 specs,  section 7, "The global structure of an HTML Document", especially 7.5.1 The BODY element.)
    I believe you are saying --in sum--  that to be reliably edited in DW, each source file must comprise a syntactically correct and complete HTML Document. 
    I am attaching a second file, "badcode2.html", modified substantially as you suggest.  It passes the DW validator, the validator.w3.org test, and the www.totalvalidator.com test.    No errors or warnings. 
    I do this:   Launch DW, open this file, choose Design View if necessary, select the final word of text, "badda", and activate Edit-->Cut (or Delete).   As before, all the other text is deleted as well. This is repeatable. 
    It seems to me this sample code satisfies your general principle.  Could I be misapplying the three validation tests?  Or that passing these tests does not assure the document  is syntactically correct and complete?   Can you recommend other tests? 
    I'd like to add the following two points as a matter of background and a bit of niggling: 
    --I'm aware  that complete HTML pages must contain <html> , <head>,  and <body> tags, although the HTML4 specification seems to say <body> tags are optional.   All my production pages, as served, contain these tags.   My underlying design is a php template with individual content files incorporated by inclusion.   There may be only one set of <html> , <head>,  and <body> in  a  page. The  "outer" template code provides these tags, and individual content files cannot contain a nested set -- so they must be "bare" markup.   Is DW able to support this design, in which "bare markup" files are seemingly unavoidable?    Is there a mechanism analogous to DW Design-Time Style Sheets to provide virtual existence of these tags so "bare markup" files can be successfully edited?  I've looked for such a mechanism but not found one.    Or some completely different method?   
    --You specify the inclusion of <p> or <h1> tags within the  body.    Is there some special significance of <p> or <h1>  with respect to stable editing in DW?  My reading of the HTML4 spec indicates that a single block element is the minimal requirement for body content. Either of these tags qualify, right?   But so does <div>, and that's what I use in my current example.    Am I misunderstanding something? 
    Bottom line,  I'm looking for a pragmatic solution for my problem:   Once in a while, among hundreds of  structurally similar "bare markup" pages I edit in DW without any problem,  I lose data.   If inserting an additional tag into all my content include files eliminates these occasional problems, I'm  willing to do that, as long as:  (1) There is an arguable technical basis for the addition,  (2) the added tag does not  produce anything visible on the served page, and (3) the validators don't flag the extra tag.     
    Suggestions, please! 
    Thanks, 
    hen3ry

  • See that there is an attachment on a line item report

    Hi
    I wondered if it was possible to include a field on line item reports to show that a there is an attachment to be viewed.  This would be very helpful to users who would then immediately know that a particular posting has an attachment without having to drill into every line to look.
    Thanks in advance.

    If it is just 'knowing' about the attachment, you can use any of the text fields to mention the same.  But if you are tagging the attachment from another process after you process this transaction, then you have to make changes in that upload program to update some field to indicate there is an attachment.  You can use Text ID or XTEXT fields for this purpose, if you are using them anywhere.
    Ravi.

  • How to attach a document (word/excel file etc)

    Dear Sir,
    We need to attach documents (word/excel/pdf etc) in a FORM application and the attached document need to be stored in database also .  There may be multiple documents getting attached .  We also desire that if a transaction document  say Purchase-Order is having  attached documents with it then an icon should appear on the screen so that user can come to know directly about the attachment .
    We request you to kindly guide us about the steps to be followed to meet the above requirement please .
    With thanks and regards
    B Mittal

    Hello,
    ALWAYS give the exact Forms version as solutions can be very different depending on that detail.
    Francois

  • Mail, attachment missing

    when somebody sent me mail with attachment, mail show about one attachment less. i dont know why? on server are for example in one mail 3 attachments but mail in lion show only 2 attachment. every time he loos one attachment, its *****!
    any solution?

    I'm having a problem running Lion where some PDFs don't appear as attachments in Outlook 2011 (note: paperclip icon is visible but no file). In particular, any autogenerated PDF from Microsoft SQL Reporting Services gives me this problem. My colleaguesrunning Snow Leopard and Windows don't have this problem.
    - Lion 10.7.1
    - Office 14.1.3
    Any suggestions?

  • SOAP Attachment question

    Hi!
    I've got a question about SOAP Attachment. It is possible to use "Datahandler" class to attach a file. But is it possible to put the datahandler in a business class ( as an attribute of the class), and the business class is a parameter of the service?
    Thank you for your help!
    Best Regards,
    Nguyen Gilbert

    I tried making the DataHandler object as a attribute of the parameter object and there were some exceptions. I think weblogic does not allow that.

Maybe you are looking for

  • ORA-12899 error from function invoked from SQL*Loader

    I am getting the above error when I call a function from my SQL*Loader script, and I am not seeing what the problem is. As far as I can see, there should be no problem with the field lengths, unless the length of the automatic variable within my func

  • Spry Menu Bar transparency problem - one solution

    Like many other people I have spent several frustrating days trying to solve the problem of Spry Menu Bar sub-menus appearing to be transparent (text, etc. underneath the sub-menus shows above/through the sub-menu items). This problem manifested itse

  • Core dump when stop sun one web server 6.1 SP6

    Hi all, I install the sun one web server 6.1 sp6 and run as FastCGI mode. Each time i stop the web server, the "core" file is generated. The following is the steps which I setup the web server: Server Path: /i03_01/SUNTest 1. Install Sun One Web Serv

  • Anyway to change F4V presents?

    I have Encore CS5 and wish to play with the output settings of the f4v  to see if I can achieve any better quality than what the default presets  are. The project is in SD 4x3 and sadly interlaced. Is there a way to  go into the presets of either the

  • Is there a a way to get photos from your iPod back onto your computer?

    My sister's computer crashed, and she lost all her photos. Her pictures are on her iPod, but I can't find a way to get them onto another computer. I searched posts looking for programs that could help, but they all cost money. Does anyone know of fre