About check box
Hi Experts,
in my selection screen i have 3 check boxes. which maintain such that by default all the check boxes are tick. if i manually select one or two check box that data should be send to mail. which i not sent it should be disable. and should not be sent. to mail . we r using one function module for mail sending. so u give logic for checking the check boxes
my coding is
*screen declare
selection-screen begin of block b1 with frame title text-001.
parameters : p_mail type mail ,
p_text1 type text1,
p_text2 type text2,
p_text3 type text3.
parameters : p_pack as checkbox default 'X',
p_cer as checkbox default 'X',
p_com as checkbox default 'X'.
selection-screen end of block b1.
at selection-screen output.
loop at screen.
if screen-group1 = '1'.
if val = 1.
screen-input = 0.
modify screen.
else.
val = 2.
screen-input = 1.
modify screen.
endif.
endif.
endloop.
hi,
in the event START-OF-SELECTION.
if p_pack = 'X'.
fill internla table with the data.....
endif.
if p_cer = 'X'.
append to internla table with the data.....
endif.
if p_com = 'X'.
append to internla table with the data.....
endif.
send the mail.......
thnx
Rk
Similar Messages
-
About Check box Prompt in OBIEE 11g
Hi All,
I really wonder about strange behaviour of check box prompt in OBIEE11g.
I have created a check box prompt and associate it with my report. Now when i tried to view result with select any of check box, report run properly, But when i deselect check box and re run report, the check box automatically select again and result of report filtered.
Any one have any Idea about this, as this seems a BUG in OBIEE11g...
Many Thanks.Hi Archie,
Are you saying, when you deselect a prompt and try to run the report, it still selects the prompts from the first selection and filters the same again?
-Amith. -
About gr message check box in me21n
Please any one can explain the purpose of the field gr message check box in the header part in the delivery invoice tab page while creating purchase order t-code me21n
regards and thanks
satyaHI.
Sathya
We are required this same scenario
Can u please know how to do GR message setup..
How u did it.
Regards
Sk -
Check boxes that turn layers on and off
hay all
im fairly new to this part of adobe but i have a good understanding
what i need i to be able to have check boxes that turn layers on and off when the tick is shown and when it is not
i know this is possible through scripting but i dont have the ability as of yet to carry out the scripting
is someone able to write a basic script for me or help me to understand what i need
i want the script to be for when a check box is clicked (mouse up) that a layer that was oringaly turned off to be turned on (electricalplan)
once the tick is removed i need the layer to turn off again
i need to do this for mulitple layers (about 10)
so i would just use the same script for each replacing the name with the correct name.
i also need the check boxes to work together so that i can have multiple turned on at the one time (electricalplan) (sewerplan) (waterplan)Do you know how to access fields with JavaScript? I access the script way of the check box properties and selecting the actions tab.
Do you know how to set the optional value for a check box? Yes
Can more than one layer be displayed at a time? Yes
Do you want to toggle the OCG by name or element number in the OCG array? I would like to toggle by name -
Check box in ALV grid gets unselected for new selection
Hi all,
This is my code :
TYPE-POOLS : slis.
Variable
DATA: g_repid LIKE sy-repid,
g_title TYPE lvc_title,
g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
g_layout TYPE slis_layout_alv,
g_print_alv TYPE slis_print_alv,
g_variant LIKE disvariant,
c_char_a(1) VALUE 'A',
c_char_x(1) VALUE 'X',
itab_alv_sort TYPE slis_t_sortinfo_alv,
itab_alv_fcat TYPE slis_t_fieldcat_alv,
fm_name type rs38l_fnam," Function Module Name
* l_sfctrlparams LIKE ssfctrlop, " Form Print Parameter
* l_sfoutopt LIKE ssfcompop,
pri_params LIKE pri_params,
c_x type c .
* Internal tables Begin with IT_ *
DATA : it_fcat TYPE SLIS_T_FIELDCAT_ALV, "---ALV
it_disp type table of ZLOI.
* Work Area for Internal tables Begin with WA_ *
data : wa_fcat TYPE slis_fieldcat_alv , "---ALV
wa_layout TYPE lvc_s_layo, "---ALV
wa_it_disp like line of it_disp.
* Objects *
DATA : cref TYPE REF TO cl_gui_custom_container, "---ALV
gref TYPE REF TO cl_gui_alv_grid. "---ALV
* Start-of-selection
Start-of-selection.
perform fetch_po_det.
perform build_fcat.
perform alv_display.
*& Form FETCH_PO_DET
* text
* --> p1 text
* <-- p2 text
FORM FETCH_PO_DET .
data : it_po type table of crmd_orderadm_h,
wa_po like line of it_po,
wa_header type BBP_PDS_PO_HEADER_D.
select guid
object_id
DESCRIPTION
POSTING_DATE
CREATED_BY
from crmd_orderadm_h
into corresponding fields of table it_po
where object_type = 'BUS2201'.
loop at it_po into wa_po.
move wa_po-object_id to wa_it_disp-ZZPONO.
move wa_po-DESCRIPTION to wa_it_disp-ZZPODESC.
move wa_po-posting_date to wa_it_disp-ZZPODATE.
move wa_po-created_by to wa_it_disp-ZZPOCREATOR.
CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
EXPORTING
I_OBJECT_ID = wa_it_disp-zzpono
IMPORTING
E_HEADER = wa_header.
move wa_header-total_value to wa_it_disp-ZZPOVAL.
move wa_header-currency to wa_it_disp-ZZPOCUR.
append wa_it_disp to it_disp.
endloop.
* write : wa_it_disp-zzpono.
ENDFORM. " FETCH_PO_DET
*& Form BUILD_FCAT
* text
* --> p1 text
* <-- p2 text
FORM BUILD_FCAT .
g_repid = sy-repid.
g_title = 'LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
*g_layout-box_tabname = 'ITAB_REPORT'.
*Check box
wa_fcat-fieldname = 'ZZCHECK'.
wa_fcat-checkbox = 'X'.
wa_fcat-outputlen = '1'.
wa_fcat-col_pos = '1'.
wa_fcat-edit = '1'.
wa_fcat-seltext_m = 'No'.
append wa_fcat to it_fcat.
*Po no
clear wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
* wa_fcat-seltext = 'Purchase Order'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Desc
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Postign date
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
append wa_fcat to it_fcat.
*value
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
append wa_fcat to it_fcat.
*Currency
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
append wa_fcat to it_fcat.
*Creator
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
append wa_fcat to it_fcat.
ENDFORM. " BUILD_FCAT
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM ALV_DISPLAY .
sort it_disp by ZZPONO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = g_repid
I_CALLBACK_PF_STATUS_SET = g_set_pf_stat
I_CALLBACK_USER_COMMAND = g_user_command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = g_title
* I_GRID_SETTINGS =
IS_LAYOUT = g_layout
IT_FIELDCAT = it_fcat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
IS_VARIANT = g_variant
* IT_EVENTS =
* IT_EVENT_EXIT =
IS_PRINT = g_print_alv
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = it_disp[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
CASE R_UCOMM.
WHEN 'PRINT'.
READ TABLE IT_disp INTO WA_IT_DISP WITH KEY ZZCHECK = 'X'.
IF SY-SUBRC EQ 0.
loop at it_DISP INTO WA_IT_DISP.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TEXT_QUESTION = 'Print the LOI details?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'.
* IMPORTING
* ANSWER = w_answer.
IF SY-SUBRC 0.
ENDIF.
* PERFORM CALL_SF.
endloop.
ENDIF.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM. "set_pf_status
Now in my ALV grid o/p i can see the check box but if i select one row and then try to slect another the first one gets deselected.
Can anybody tell me what is missing?Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers -
How do I create a check-box matrix question using Acrobat XI Pro?
I would like to insert a question that is a 10 x 10 matrix that allows respondents to select multiple boxes in each row. For example, the "add item > rating scale" feature formats a matrix the way I would like, although it only seems to allow for radio buttons. With this feature, respondents can only select one item per row. Is there any way to use this feature with check-boxes rather than radio buttons? Or a different feature to create a matrix that allows for multiple selections per row?
Thanks so much,
AndyI created a 30 page Form in Microsoft Word with 20 to 30 check boxes on each page using the Zapf Dingbats Font.
When I used Acrobat XI Pro to automatically convert the form it fails to create usable check boxes.
It worked properly about 3 times on test pages but it will not do it again.
Manually inserting check boxes one by one on 30 pages is mind numbing to say the least.
Why doesn't the software work properly anymore? -
When I open my iCloud browser it looks different than "normal." It shows the list with check boxes, not slider on-off buttons. It dos not show a "storage and backup" button so I cannot set up my backup. What is wrong?
If see something like the image below it's because you are looking at the iCloud settings on your Mac, not on an iOS device (which has sliders). Storage & Backup isn't in the Mac settings because you cannot back up your Mac to iCloud. Only iOS devices can back up to iCloud. On a Mac, you can get information about your iCloud account storage by looking at the green usage bar at the bottom and by clicking the "Manage..." button on the bottom right.
-
I am trying to import my photos from the computer. I went into ITunes, connected my Iphone and went under the photo section expecting to see a check box for syncing. It's not there and all I have is a note about Icloud. Can anyone help?
Hello evilemma72,
Thanks for using Apple Support Communities.
If you do not see a checkbox to enable syncing photos, and instead see a message the iCloud Photos is on, then it indicates you have iCloud Photo Library enabled on your iPhone, and the photos already exist on your phone. To learn more about iCloud Photo Library, take a look at the article below.
iCloud Photo Library FAQ - Apple Support
Take care,
Alex H. -
I create PDF forms on daily basis for multiple people around but still, I create a table in Word and then manually convert it to PDF. I'm using Acrobat X and then I manually create radio buttons or check boxes in each cell of the table so aligning those buttons or check-boxes in the same line is a problem. I know there would be some solution to this but can anyone guide me to that? Also, making the same size of the radio-buttons of check boxes likewise ? ? ?
Please see the image above and advise how to align them in the same line and how to make them same size using Acrobat X?
Your help appreciated.You should create these fields using the Place Multiple Fields command, so that they are aligned properly and all the same size. Read about it here:
http://help.adobe.com/en_US/acrobat/X/pro/using/WS8C2DDC1C-C174-4ad1-893F-B14A1C0289B4.htm l
Read how to align and distribute fields here:
http://help.adobe.com/en_US/acrobat/X/pro/using/WS6D2D2BFC-6F69-4a8b-BDE6-8043D7EE240D.htm l -
How do I list product details using check boxes to save having to write the same info over and o
Hi there
First of all
Happy New Year and I hope everyone is well all the best for the future
Now...... back to the point
What I want to do is........
I am making a jewelry ... necklace... shopping site for my girlfriend.... well.... my wife in two weeks.... This site has been a loooong time coming.... I am still not happy with it so it still not public.... but is working ok She very upset it taking more than a year.... but I am still learning and I always want it better
Anyway
I have hundreds of Necklace details to enter..... i thought it would be easy but it is very tmie consuming...... So ...
The necklaces are made from different kinds of stones.... turquoise .. agate ... and about a hundred more different kinds of stones
In my add product form I have a field for entering product details..... to enter the different kinds of stones the necklaces are made from..... sometimes more than twenty for one necklace..... So what I want to do is have check boxes... or radio boxes to choose what stones to add to the description..... So I can have a list of about fifty different kinds of stones all with a check box next to them so that when you choose a box that stone name would appear in the product description
Sounds easy but I can't figure out how to do it.....
I think I need a different table in my database a 'stone_neck' field to store all the stone names.... about 50 fields..... .... with an id field and a name field and maybe a display field ....... I think
Does that sound correct.......?
If so then how do I display the details in a field in a table in my product detail page? I think I need a recordset on my detail page that gets all the stone names.... but how do I display the names of the stones that I have checked in the addprod form ? Do I need to put all every one of the stone info from the bindings panel? and then show region if .......
i am confused
If anyone has any ideas it would be great
Have a great dayMaybe you can take tips by visiting sites of prominent jewelry brands like Tiffany to get some ideas of how to structure your product list details.
Just a thought.
Mahadevan
www.wheretobuyringsnow.com -
How to insert check box value in table?
Hi all
kindly help me how to insert check box value in database. what code i have to use as i am new in programing.
thanx in advanceHi,
There is no "Check box" in a table, a check box is a GUI (Graphical user interface) item.
What you want is to store a boolean value in a table. For that you can use the varchar2(1) datatype and store Y or N. (or anything else)
(you cannot define boolean as a datatype for a column).
If you're using a front-end application like apex then it might be useful for you to read the documentation about chekc boxes :
http://download.oracle.com/docs/cd/E10513_01/doc/appdev.310/e10497/check_box.htm#CHDDFBFH
(for the rest if it's Oracle Forms then everything is already said).
Edited by: user11268895 on Aug 17, 2010 10:44 AM -
How to add check box in table control?
Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali -
How to display Check box in Reports
Hello all,
I just want to know about how to have a check box in the Reports.
The check box should be checked if the value in the columns is true and unchecked if the value is False.
Thank you
SusanTry the below code
select
APEX_ITEM.CHECKBOX(1, field_name ,decode(fileld_name , 'N',null,'CHECKED'))
field1 ,
field2
from some_table;Regards,
Shijesh -
How to add a single check box and a label to a image in Muse?
Hello!
I need help with adding a check box with a label to the right of it. I know about the forms, and how you can add a check box there but i don't need all the other form options.Hi
It is not possible to use only checkbox from a form at the moment. An alternate way could be inserting it using html, something like below
<input type="checkbox" name="Muse" value="Muse"> A sample checkbox<br>
I am not sure what exactly you are trying to achieve, but this will work with Form tag only, like in the example here
Tryit Editor v2.5
Do let me know if you have any question. -
How to add a check box in ALV Grid using SAP R/3 release 4.6b?
Hello everyone,
I hope you all fine.
I'm writing because I have a requirement with ALV Grid, what I need to do, is to insert a checkbox into a cell, I already read the forum to know how to do that, but I'm using a SAP R/3 release 4.6b, and when I execute the program the checkbox is displayed greyout, because this release doesn't have the EDIT property into the slis_t_fieldcat_alv.
Does any body know how to enable the checkbox cell in the ALV Grid for this release?, so it will allow the user to mark the desired rows.
I'll really appreciate if you guys could help me to find a solution.
Thanks for your time.
Regards,
GuillermoHi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers
Maybe you are looking for
-
My iPod Touch calendar no longer receives updates
My iPod Touch calendar no longer receives updates from the calendar program in my MacBook. Used to work fine, via iTunes synch. Have I inadvertently turned that function off?
-
Why does my AdobeBridge keep shutting down?
I have a PC and when I use the camera raw option it tells me that "Adobe Bridge CS6 has stopped working and needs to close". I just recently downloaded windows 8.1 upgrade, does that have anything to do with it? Any suggestions? It's really annoying
-
Anyone heard of a problem with the mouse button on a Satellite A30, the left mouse button is solid, it just doesnt press down at all so I have to use an external mouse, Im wary of trying to prize it out to have a look without damanging it further, an
-
MS Patch compatibility with Ciscoworks
Greets What is the official Cisco position on applying Microsoft patches to Cisoworks servers running Windows 2000? Our server team wants to patch these servers regularly but we are concerned about the stability of the ciscoworks platform being patch
-
Xbox One Portfowarding on WRT310N to get NAT open
https://support.xbox.com/en-US/xbox-one/networking/network-ports-used-xbox-live Can someone help me out with this? Ive tried with single port and the port forwarding but my NAT is still moderate.