About download the file into application server

Hi,
I have created the HR report for employee details like wbselement,manager details,
department,desg,etc. and this output will be downloaded to application server.
For this,am using open dataset and close dataset.
what's my problem is ,  when i am trying to download the details in Appln server, it exceeds the maximum line size and some of fields are truncated. how to avoid this?
Thankx,
Sivasamy

Hi,
While you download the Sata into an application server, you can see upto 254 cahrecters only, you can not see more than then, but if you download the smae into an internal tabel then it will download all the data ...
Regards
Sudheer

Similar Messages

  • Gui_download function to download the file in application server in bdc

    Can we use gui_download function to download the file in application server in bdc?
    Regards,
    pandu.

    for downloading the file on application sever you use the concept of Dataset. GUI_DOWNLOAD is for presentaion server.
    regards
    Abhi

  • Issue in downloading the file to application server (background)

    i am downloading the PIR records to the application server.
    the program is running fine .
    i m using background coz i m downloading large no of records (>5000)
    my actually target is 28000 records.  we are spliting it up into atleast 7000 records at a time.
    for 1000 records  , it is taking     217 secs        (this is fine)
    for 2000 records  , it is taking    1647 secs        (not satisfactory)
    for 5130 records  , it is crossed more than 10647 secs   still running  (not acceptabe)
    why is it increasing in expotenial of time for increase in the records
    why not ~1000 sec for 5130 records...??
    somebody help me , the hav check the extended check and fine tuned the code.
    it is a modification of standard program RM06IBIE for download of PIR records.
    regards
    venkat.

    Hi,
    It is definitely because of the poor performace in the code only.
    Try using, FOR ALL ENTRIES, SORT BY key fields, DELETE ADJACENT DUPLICATES from the internal table COMPARING key fields, etc.
    If you have already used all the possible ones, then check the table from which it is picking the data.
    Whether they are using the primary key fields in the where condition, if they are using some other fields, then go for an option of secondary index if required.
    Regards,
    Santhosh.

  • Download the file to apllication server

    hai all,
    My requirement is i need to download the file in application server and i need to validate the file path that file already exist or not if exist it has to give the error message
    How can i do that.
    Pls send the fn modules are methods which is suitable for my requirement with code.
    I will reward the points,
    Thanks in advance
    Laxmi

    HI,
       report zexternalfile .
    tables : zzpublisher,
             sscrfields.
    data: it_publisher like standard table of zzpublisher,
          wa_publisher like zzpublisher.
    select * from zzpublisher into table it_publisher.
    call function 'GUI_DOWNLOAD'
      exporting
      BIN_FILESIZE                  =
        filename                      = 'C:\externalfiles\kamal.XLS'
      FILETYPE                      = 'ASC'
      APPEND                        = ' '
        write_field_separator         = 'X'
      HEADER                        = '00'
      TRUNC_TRAILING_BLANKS         = ' '
      WRITE_LF                      = 'X'
      COL_SELECT                    = ' '
      COL_SELECT_MASK               = ' '
      DAT_MODE                      = ' '
    IMPORTING
      FILELENGTH                    =
      tables
        data_tab                      = it_publisher
    EXCEPTIONS
      FILE_WRITE_ERROR              = 1
      NO_BATCH                      = 2
      GUI_REFUSE_FILETRANSFER       = 3
      INVALID_TYPE                  = 4
      NO_AUTHORITY                  = 5
      UNKNOWN_ERROR                 = 6
      HEADER_NOT_ALLOWED            = 7
      SEPARATOR_NOT_ALLOWED         = 8
      FILESIZE_NOT_ALLOWED          = 9
      HEADER_TOO_LONG               = 10
      DP_ERROR_CREATE               = 11
      DP_ERROR_SEND                 = 12
      DP_ERROR_WRITE                = 13
      UNKNOWN_DP_ERROR              = 14
      ACCESS_DENIED                 = 15
      DP_OUT_OF_MEMORY              = 16
      DISK_FULL                     = 17
      DP_TIMEOUT                    = 18
      FILE_NOT_FOUND                = 19
      DATAPROVIDER_EXCEPTION        = 20
      CONTROL_FLUSH_ERROR           = 21
      OTHERS                        = 22
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    <b>Reward useful points,</b>
    siva

  • Problem while dowloading the file from Application Server

    Dear Experts,
                 I am facing the Problem while downloading the file from Application server.
    We done the automatic function while saving the invoice, this will create an idoc, and this idoc is written in the Application Server.
    I am running the Transaction AL11 and select the record, and from menu --> List, i am downloading into TXT format.
    But for some segments, the length is long, and so the last 3 to 4 fields values are not appearing in the File. Even though i am unable to view the values in the file before downloading. But i can view in IDOC.
    Please help me to solve this issue.
    Thanks & Regards,
    Srini

    but our user will use the Txn. AL11 and they will download from there
    Educate the user On a serious note, tell him this is not how data from app server should be downloaded. You can ask him to talk to the basis team to provide him access to the app server folder where the file is being stored.
    I can set the Variant and put this in background, But always the file name will be change, Like we use Time stamp in the File name.
    You can't automate this process by scheduling in BG mode. This is because the in BG mode you can't dwld the file to presentation server.
    Hope i'm clear.
    BR,
    Suhas

  • Error in Reading the file from Application Server

    Hi,
    This Error is regarding one of my interface, the issue is that , the interface reads data from file in bunch suppose 100 records at a time , then processes those records and once finished go for next 100 records .
    Noe the error is that , the process takes place till 500 records correctly but when it went to fetch for next 100 i.e fom 501 to 600 it selects only 501 to 583 .
    this records has been processed successfully but the job finished there only
    but the file contains 788 records
    When the same file has been run in other server it ran successfully without such error .
    Can you please suggest how to resolve the issue

    Hi,
    Try to manually download the file from application server using standard transactions, and than check how many records are you able to download from app. server.
    I guess there might be something wrong with the format of 583rd record, which makes sap assume that the file has come to an end.
    Hope this will help you.
    Regards,
    Vinit...

  • Append data into the file in application server

    Hi Friends,
    I have an issue where i have a job which has three different stepst for same program. If i run the job the program will create a file in the application server and append the other two steps in the same file without overwriting the file or creating a new file.
    My problem is like its creating three different files in application server for that particular job since it has three steps . Its not appending into one particular file .
    I am using the FM 'Z_INTERFACE_FILE_WRITE' where i have used the pi_append in the exportng parameter . ITs working when i specify the file in local system. It is appending correctly when i run the report normally to apppend into local system.
    But when i schedule a job to append the file in application server its creating three different files.
    Kindly help me if anyone is aware of this issue
    Thanks in advance
    Kishore

    Hi,
    Please use open dataset to write and append files.Please check the logic of Z FM which you are using .
    To open and write into a file  use
    OPEN DATASET FNAME FOR OUTPUT.
    To append data into existing file use
    OPEN DATASET FNAME FOR APPENDING.
    To write into file:
    v_file = file path on application server
      OPEN DATASET v_file FOR output.
      IF sy-subrc NE 0.
    write:/ 'error opening file'.
      ELSE.
       TRANSFER data TO v_file.
      ENDIF.
    CLOSE DATASET v_file.
    For appending :
    OPEN DATASET v_file fOR APPENDING.(file is opened for appending data  position is set to the end of the file).
    Thanks and Regards,
    P.Bharadwaj

  • How to Post a file(Flat File ) into Application server of the XI(AL11)?

    How to Post a file(Flat File ) into Application server of the XI(AL11)?
    Best Regards,
    Jose

    Hi,
    1) goto SXDA_TOOLS Transaction code
    2) Provide the Following details
    Object Type : DXPROJECT
    Program Type: BAPI
    Program/Method: CREATE
    3) Click on Copy Button
    4) Select the Source as Presentation Server
         a) Select  the File where you saved in your Local machine
    5) Select the Target as Application server
         a) Check the check box Remote Server
         b) Select the File type as Physical
         c) In File name give /usr/sap/SSD/DVEBMGS00/work\Your file name (This the Server path                                                                               
    Where the file is going to save)
    6) Click on Continue
    Go to AL11 and check whether the File has been create in the following path  /usr/sap/SSD/DVEBMGS00/work
    Provide this path in the Communication channel path when you select the Transport Protocol as NFS and you place the file in AL11 directory.
    Regards
    Seshagiri

  • Download text file from application server to client server.

    Hi all,
    I am facing a format issue while downloading text file from application server to the client machine.
    The issue is that, say I have 6 to 10 lines in my text file in application server. but when i store it on the hard drive,
    it shoes all the data in a single line. Where as i need to download data in same format as in application server.
    Awaiting for your responses.
    Regards,
    Jose

    Hi,
    If we want to upload file data from the application server to the internal table, there is no function module or class static method which we can use, we must wirte the code by ourselves.
    1. For the file data which has no seperator between field columns.
    PARAMETERS p_file  TYPE dxfile-filename.
    START-OF-SELECTION.
    OPEN DATASET p_file IN TEXT MODE ENCODING DEFAULT FOR INPUT.
      DO.
        READ DATASET p_file INTO gds_data.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
        APPEND gds_data TO gdt_data.
      ENDDO.
    CLOSE DATASET p_file.2. For the file data which has tab separator between field columns.
    DATA: gds_field_split type gts_data.
    FIELD-SYMBOLS: <fs_field> TYPE gts_data.
    PARAMETERS p_file  TYPE dxfile-filename.
    START-OF-SELECTION.
    OPEN DATASET prf_file IN TEXT MODE ENCODING DEFAULT FOR INPUT.
      DO.
        READ DATASET p_file INTO gds_field.
        SPLIT gds_field  AT cl_abap_char_utilities=>horizontal_tab
             INTO TABLE gdt_field_split.
       LOOP AT gdt_field_split  into gds_field_split.
           gdf_index = gdf_index + 1.
           ASSIGN COMPONENT gdf_index OF STRUCTURE
                 gds_data to <fs_field>.
          IF sy-subrc = 0.
              <fs_field> = gds_field_split.
          ENDIF.
       ENDLOOP.
        APPEND gds_data TO gdt_data.
      ENDDO.
    CLOSE DATASET p_file.
    Thanks & regards,
    ShreeMohan

  • Regarding Reading the file from Application Server

    Hi,
    I am trying to read data from Application Server but due to special characters it is getting dumped out.
    US24,Q,Acero (Carbon),AA,0010,0001,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),AA,0010,0002,01,Area rectificada sin da#os ra
    US24,Q,Acero (Carbon),AA,0010,0003,01,Ver Mir para dimension#
    US24,Q,Acero (Carbon),CD,0010,0001,01,ITPE Soken para verificacion
    US24,Q,Acero (Carbon),CD,0010,0010,01,No se permite desprendimiento
    US24,Q,Acero (Carbon),CD,0010,0002,01,"Vernier, cinta metrica"#
    In the last line it is going into dump due to special character ".
    Please suggest.
    Thanks
    Priyanka.

    Hi,
    You can check the mode in which you are reading the file
    from application server that is
    Open Dataset in Binary or Text Mode.
    Hope it helps
    Regards
    Mansi

  • How to download a file from application server to presentation server

    Hi experts,
    I want to download a file from application server to presentaion server, file contaims three fields customer name, customer email id and status..
    help me out i m new into sap.

    Dear Aditya,
    Please check below thread
    http://scn.sap.com/thread/1010164
    it will help you.
    BR
    Atul

  • How can I download the data to Application Server and Network Drive

    Hi Experts
    I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
    Thanks & Regards
    Raghava

    Hi Experts
    I am using like this
    P_Back is a check box on the selection-screen.
    it_fihrst_out-its internal table
    sy-batch -Program is running in the background
    IF sy-batch IS INITIAL.
        IF p_back = 'X'.
          OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc = 0.
            LOOP AT it_fihrst_out.
              TRANSFER it_fihrst_out TO file_01.
            ENDLOOP.
          ENDIF.
          CLOSE DATASET file_01.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ELSE.
          CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
              filename                = file_01
              filetype                = 'ASC'
            TABLES
              data_tab                = it_fihrst_out
            EXCEPTIONS
              file_open_error         = 1
              file_write_error        = 2
              invalid_filesize        = 3
              invalid_type            = 4
              no_batch                = 5
              unknown_error           = 6
              invalid_table_width     = 7
              gui_refuse_filetransfer = 8
              customer_error          = 9
              OTHERS                  = 10.
          CASE sy-subrc.
            WHEN 0.
              WRITE: / file_01, / 'successfully generated.'.
            WHEN 2.
              WRITE: / file_01, 'Output Error: File still open'.
            WHEN OTHERS.
              WRITE: / file_01, 'Unexpected error occurred.'.
          ENDCASE.
        ENDIF.
      ELSE.
        LOOP AT it_fihrst_out.
          WRITE:/ it_fihrst_out.
        ENDLOOP.
      ENDIF.
    This is the code .

  • Need a pipe delimiter after every field in the file on application server

    Hi ,
    i have to transport data in internal table to a file on application server.
    I have done this successfully. But the problem is i have to put a pipe
    delimiter after every field in the file on application server.
    Could yoe plz help in  this issue.
    Thanks & Regards
    Suresh kumar D

    Hi Should,
              I think the below code should solve your problem as i also had  a similar type of requirement and this was the code i had used in my program.
      FIELD-SYMBOLS: <FS> TYPE ANY.
      DATA: L_FLINE TYPE STRING.
    Open file for output
      M_CHECK_SELSCR_FNMS O1 O.
      LOOP AT I_TARGET.
    Write records to file
        DO.
          ASSIGN COMPONENT SY-INDEX OF STRUCTURE I_TARGET TO <FS>.
          IF SY-SUBRC EQ 0.
            IF SY-INDEX EQ 1.
              MOVE <FS> TO L_FLINE.
            ELSEIF <FS> NE C_PIPE.
              CONCATENATE L_FLINE C_PIPE <FS> INTO L_FLINE.
            ELSE.
              CONCATENATE L_FLINE <FS> INTO L_FLINE.
            ENDIF.
          ELSE.
            TRANSFER L_FLINE TO W_SRVR_NM_O_O1.
            EXIT.
          ENDIF.
        ENDDO.
      ENDLOOP.
    Close file
      CLOSE DATASET W_SRVR_NM_O_O1.
      IF SY-SUBRC EQ 0.
        MESSAGE S208(00) WITH TEXT-M02.
      ENDIF.
    Regards
    Sikha

  • Download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit

    I can not download the SAP NetWeaver Application Server ABAP Trial 7:03 64-bit complete, the file size is 3,912 gb and I can only download 2 gb.
    How can I download the full file?
    thank you

    https://store.sap.com/sap/cpa/download/20/0000000218?tkt=6728195BC9A41D6FDC99371FC9BB49E9_20140521182535.4356890&sap-lan…

  • Write PDF file into application server.

    Hi Gurus,
    I have created a smartform and converted into PDF using function module as given below. Now I want to write this generated PDF file into application server. I am not generating any spool request too. How can I proceed from here?  Pls advice..
    CALL FUNCTION 'CONVERT_OTF_2_PDF'
        IMPORTING
          bin_filesize                 = lv_bin_filesize
        TABLES
          otf                              = ls_job_output_info-otfdata
          doctab_archive         = lt_docs
          lines                           = lt_lines
        EXCEPTIONS
          err_conv_not_possible  = 1
          err_otf_mc_noendmarker = 2
          OTHERS                 = 3.
    Thanks..
    Saj

    transfer all the data from ur itabs to one final itab declared as follow
    DATA: BEGIN OF final_itab OCCURS 0,
                     document  TYPE string,
               END OF final_itab.
    then finally,
    OPEN DATASET 'yourfile.pdf' FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      len = strlen( final_itab-DOCUMENT ).
      TRANSFER final_itab-DOCUMENT  TO 'yourfile.pdf'  LENGTH len.
    CLOSE DATASET 'yourfile.pdf'.
    This ends the coding mate.
    Enjoy it n have a good day.
    Cheers

Maybe you are looking for

  • How can I include a carriage return in a expression

    How can I include a carriage return in a expression between text strings eg Expression 1 = Text1 & text2 & text3 & text4 I need to display it as below Text1 Text2 Text3 Text4 adjusting the box the size doesn't work as the text strings are variable le

  • Indesign/pdf: bleed marks for cover

    I am trying to save a pdf book cover file with bleed marks before I send it to the printer.  My cover is 6x9.25 with .125 bleeds, so I made an indesign document with those specifications, placed my photoshopped cover which included the bleed (6.25x9.

  • Sapscript PO MEDRUCK total amount including condition charges

    Hie gurus , i need your help with  a sapscript  Purchase order  Medruck, i can't find the variable which contains PO total that includes condition charges, (e.g Freight charge , discount and customs). i am just getting an amount that does not include

  • Preview shows incorrect DPI on JPEGs?

    One of my employees is on a Mac using Snow Leopard. I have been sending him JPG files to forwarded to some printers and when he receives the message via email and then open's it in Preview, the inspector shows the file as being 72dpi. However, the fi

  • URL for apache plugin for linux with weblogic 6.1

    Hi, can anyone tell me, where i can find the apache plugin for linux weblogic 6.1 thanks in advance, cheers chris