About Import and Export question!

I'm from China and a new DBA with a little experience with Oracle administrator.I meet some questions and can't solve.
I have a database server (With Oracle Server 7.3.2 for NT),I exported the datas as follows way from a workstation which is oracle client and have admistrator tools.
exp73 system/manager@nts-com full=Y file=c:\czdata.dmp
Enter array fetch buffer size:30720
Export grants :Y
Export table data :Y
Compress extents:Y
And last export terminated successfully without warning.
In the next,I began imported it into the New database Server(With Oracle Server7.3.2 for NT) with a workstation which is oracle client and have admistrator tools ,too.
imp73 system/manager@nts-com1 file=c:\czdata.dmp
The error message appeared:
IMP-00016:
IMP-00000:
In the two databases,I had run the sql before the database was setuped:
UPDATE PROPS$ SET VALUE$='CHINA' WHERE NAME='NLS_TERRITORY';
UPDATE PROPS$ SET VALUE$='CHINESE' WHERE NAME='NLS_LANGUAGE';
UPDATE PROPS$ SET VALUE$='ZHS16CGB231280' WHERE NAME='NLS_CHARACTERSET';
And the same tablespace,users in the database.I couldn't find the causation.
What can I do? Please give me such a case which was resolved successfully as detaileder as more. Thanks very much!
null

hello,
I don't know if my question is clear enough but I mean is there a method to export the model as a DDL code
Thanks
AL

Similar Messages

Confused about import and export formats

I have a load of 8mm video footage that I want to archive before the old camera dies. As a first step I have used my DVD/HDD recorder attached to my TV to save the footage from the camera, do a little bit of editing and then burn onto DVD at the highest quality available. Doing this I can get 60 mins of footage onto each DVD and the quality is a good as the original. I now want to play with a few of these by importing into iMovie 09 so that I can add a few titles and link clips together with a few transitions. Nothing too complicated. Here's where I get a bit lost with all the formats available to me for importing and exporting. What's the best way of doing this? Having read around a bit it looks like conversion to DV is good for getting into iMovie in the first place. To do this I have tried using MPEG Streamclip and it looks OK, but what about all of the settings options DV25, DVCPRO25, DVCPRO50, frame blending, downscaling etc etc no idea what any of this means. Then having added a few bits and pieces, what's the best way of saving it again to make sure that I keep the quality as high as possible - DV? Ultimately I'd like to have the edited movies back on DVDs with the footage quality the same as I started with i.e. no compression artefacts. If I save the final version in DV format I could then keep copies to view with Quicktime and then do I just use iDVD or MPEG Streamclip to convert to a format playable on a DVD player. Is there any guide somewhere as to what all of the different formats are for pro.s cons etc. Also confused as to why files get bigger and bigger e.g. a 20min clip on a DVD is about 1.5GB, but when converted to DV becomes almost 5GB. I can understand how compression makes files sizes smaller, but what's happening here??
Neil

A Quick Time .mov movie can play on any PC as log as they have the Quicktime player
free http://www.apple.com/quicktime/
To do it, open iMovie, pick you project, then "Share to Media Browser" and pick the "HD" setting. It can take hours/movie depending on their length. Once it is done you can find it inside the iMovie project's file. TO get there, go to Users Folder -> your User name folder -> Movies -> iMovie projects -> and find the project that you made the movie from. Right click on that file (or use the control key as you click on the file) and you will see a menu -> Show Package contents -> Movies and your 720p .mov movie will be in that Movie folder. you can drag it to your desktop and copy it to your external HD or flash drive.
roger

Import and Export Questions

Trying to work out if final cut pro can do what we need. Our requirements are:
1. To be able to export .avi files with a indeo 5 codec from a .mov
2. To be able to import a muxed mpeg and export with separate audio and video track. (unmuxed?)
Can we do this with Final Cut Pro?

To be able to export .avi files with a indeo 5 codec from a .mov < </div>
Not without a Macintosh version of Indeo 5 which, AFAIK, does not exist. You would need to go out of the Mac to a windows machine to do the AVI encoding.
FCP is an editor, not a transcoder. For that, you need some other tools.
http://www.free-codecs.com/download/Indeo_Codec.htm
http://www.digitalpreservation.gov/formats/fdd/fdd000061.shtml
bogiesan

Itunes keeps telling me "the registry setting for importing and exporting and burning cds are missing" reinstall itunes. I have reinstalled itunes about 30 times and still get the same message. I do not have another cd burning software loan

I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer" I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs. All of my drivers and firmware are up to date. Please help

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

DRM/MDM Import and Export File types - Question

Hi Guys,
We have been implementing Hyperion DRM to our existing Oracle Environment for managing the company's sales data which comes from multiple data sources. In my experience and research, I feel DRM is an excellent tool but there are some questions I have in our mind. The following are the few questions that I\we have.
a) How does the Import and Export of data functionality works in DRM? In this forum, I have found some one saying we can only import the data through flat files, in other words, "text file" with the delimiters [ ] seperated by comma. My question is, Is there any other possible way to import the data, Such as getting the data directly from the database tables? To get the data, Do we need to have any integration points or do we need to use SOAP APIs (& programming)?
b) While we exporting the data, can we export it directly to the Oracle database tables? What are the integration points needed for this kind of export?
c) Is there any sample guide or design document available for creating the hierarchy and nodes. I just want to know how the attributes that we have "is transformed" into the hierarchies and nodes in DRM? In the past, I used Essbase, which is integrated with DRM and that process was straight forward since we imported and exported data directly from DRM to Essbase.
I would appreciate any suggestion offered to me regarding the questions posted above.
Thanks in advance,
Leo
Edited by: user10201910 on Apr 1, 2009 4:58 PM
Edited by: user10201910 on Apr 1, 2009 5:00 PM

Hi,
1.As per my knowledge the Import can be done using Flat files only,we can import the data from Oracle Tables once the structure is ready in DRM.
2.We have an utility called Export to Table(in the last tab when you performing an Export along with Export to File), which requires the DB mapping to be done properly,
Thanks!

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Premiere CC support Closed Captions with mpeg2, mpg, ts import and export embedded

Using a side-car file is not an option. This question is about embedded closed caption files.
Will Adobe Premiere Creative Cloud support the import of closed captioned data from already captioned mpg, ts, mpeg2 video files, and will it support the export of mpg, ts, mpeg2 video with closed captions embedded? If they are adding this feature, do you know when? At least a rough estimate?
I create content that broadcasts ON DEMAND for major cable television providers and currently we are working with Mac Caption/ Caption Maker and Manzanita to individually caption each video. We need the ability to take the finalized captioned content and occasionally cut sections out and replace with other finalized captioned content. We wanted to do this without needing to RE-Caption every video after we export from Premiere, as that will add many additional hours of work per video.
Researching online I found that CC supports the import and export of embedded QuickTime closed captioned files. Our provider's standards are mpg/ts. One youtube video I found said that Adobe was adding mpeg2/ts support for closed captioning but I can not find any official word on the subject.
I appreciate any and all help/information on the subject.

Hi Waga Fox 5,
waga fox 5 wrote:
Is there somewhere that we can request this as a feature? We have not upgrade to 2014.1 yet, but it looks like that is still not a feature as you mentioned.
Yes, here you go: http://www.adobe.com/go/wish
Thanks,
Kevin

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Looking for a program that can handel import and export of palm doc files

I am looking for a program that can handel the import and export of palm doc Files that can convert them to to either txt or RTF files for Vista 32, running Palm Desktop 7.1.
Could anyone give me a few suggestions of any plug-ins that would be good me?
Hearns
Post relates to: Palm IIIxe
This question was solved.
View Solution.

Ok, you need to clean uninstall Palm desktop 6.2. Install Palm desktop 4.1.4 and download and install documents to go version 6.
Here are the clean uninstall instructioins for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. Use the username that is on the handheld.

Import and Export in 4.6b

Hi All,
I have a syntax regarding Import and Export statements which are not working in 4.6b. Below is the statement.
IMPORT ID = (Internal Table) FROM DATA BUFFER ( String Variable ).
EXPORT ID = (Internal Table) TO DATA BUFFER ( String Variable ).
What can we have alternate to above statements ?
Actually I need to transfer or export some internal table content to String and Import the same data from string.
I am looking perticularly about buffer only. If not that what can we have alternate to that ?
Thanks,
Ram

Hi
You can try to use Field symbols also, for example
you need to code in the target program.
field-symbols <fs_itab> type standard table.
assign '(PROGRAMNAME)ITAB[]' TO <FS_ITAB>.
example, i did this in user exit
assign '(SAPMV50A)XLIPS[]' to <FS_ITAB>.
if <FS_ITAB> is assigned.
code will continue
make sure program name is in capital letters.
Regards
Madhan

Import and export a root site in a site collection in sharepoint2010

Hi,
I have site-collection in sharepoint2010 i.e. http://test.com/ and i have subsites under it that looks like this http://test.com/HR,http://test.com/payroll etc..
root site in site-collection i.e. http://test.com/ has to be imported from other SharePoint farm but the subsite under it should not changes i mean the HR and Payroll
let me know how to import a root site from prod farm with out affecting the subsites or breaking the subsites..
if this is possible, please let me know the import and export commands without affecting the subsites
Thanks,
sarath.
Sarath Sannadi Sharepoint Dev at Saksoft

If you want to restore it root level in target farm then the Subsite under the site collection will not change.
you use Backup-SpSite
Backup-SPSite http://test.com -Path C:\Backup\site_name.bakand then in the target farm use Restore-SpsiteRestore-SPSite http://test.com -Path C:\Backup\site_name.bak -Forcechange the path accordingly.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

When to use import and export directives?

I'm very confused about what the import and export language extensions do and when one should use them.
I have a Bridge application with multiple source files. As long as I don't call code in another file from the startup execution path (before all source files are loaded) and only call across modules after Bridge is running (e.g. from events in Bridge), I don't seem to need import and export. All source files seem to be in the same namespace and all can see each other's global objects/functions.
So, when would someone use import or export? And, what is the #engine that the manual discusses in relation to import and export? If some of my source files are library files that I intend to be used by multiple different files/applications, should I be using import/export for that use? Or is this only applicable when there are somehow multiple JavaScript engines involved? And when would that situation arise?
--John

John,
The import and export directives don't really matter in Bridge. All scripts execute in the same namespace. That's why namespacing your scripts is crucial in Bridge.
The #engine directive creates another JavaScript engine instance containing the script with the directive. If you then wanted to use stuff from that engine, the import and export directives would be needed. But even with that, in Bridge, the main engine will contain the script. There will just be a second engine (you can see this in the ESTK) containing the same stuff. Since it's in the main engine, there's no point in using the import and export.
Some of the other apps, GoLive, for instance, each script executes in its own engine and namespace. And import and export are needed.
This could change in future versions, and if it does, we'll be certain to make sure everyone knows about it.
Bob

SQL Server Import and Export Wizard Issue

i am trying to export SQL data into excel to send out weekly reports. I have created a view and a SQL account has access to this view; however, I am unable to successfully export the data. In preview I see all of the data yet it fails on the
Pre-execute with the below. It creates the excel file with just the header. I am using SQL 2014 and loaded the 64 bit AccessDatabaseengine. I am selecting excel 2007. Any ideas welcome.
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
(SQL Server Import and Export Wizard)
Error 0xc02020e8: Data Flow Task 1: Opening a rowset for "WeeklyList" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Error 0xc004701a: Data Flow Task 1: Destination - WeeklyList failed the pre-execute phase and returned error code 0xC02020E8.
(SQL Server Import and Export Wizard)

Hi astro,
Please ensure that you haven’t renamed or moved the destination excel file during the exporting process. Also make sure that “Create destination table” option is checked as below screenshot and the SQL statement is correct.
For more details about using SQL Server Import/Export Wizard to export data from a SQL Server database to an Excel spreadsheet, please review the below blog.
http://www.mssqltips.com/sqlservertutorial/202/simple-way-to-export-data-from-sql-server/
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support

Difference between Import and Export parameters in Function Module

Hi All,
I am unclear about the import and export parameters, when i create a function module. Can anyone explain abt this. However when i call the function module in any program the import parameters in Function module are displayed as exporting in program amd the export parameters as importing.
Any help on this would be appericiated.
Shejal.

HI,
Import parameter in FM is the value u provide to FM for processing.
export is the value u get from FM after processing.
when u call a FM in a progam the import parameter will appear as Export bcos u r giving value to the FM.
and u r getting value from FM in import parameter(bcos u r importing).
rgds,
latheesh
Message was edited by: Latheesh Kaduthara

Import and Export of R prediction model

hi ,
How can i import and export a oracle R prediction model   e.g from/to file ?   Basically,   We need it for the following requirements
1. We would like to ship a sample prediction model as part a product.      So, The product will work with sample prediction model for some time after install    till a newer model is created   with data in customer env.
2. Before regenerating a prediction model,   we would like to take a backup of the existing prediction model.   And if it turns out that the prediction results are not as good with new model, we should be able to reinstate the older model.
3. Support a mode where oracle R prediction model can be loaded to an environment which is different from the the source environment where the model was actually generated.
Please advise
Regards,
Arif

I tried the above method but i am facing an issue that although the prediction model is imported in to R using load command,   it is not loaded in ORE environment.     Due to this i am not able to use the imported predictionmodel for scoring
I tried the following
#Generate the prediction model
> PREDICTIONMODEL <- ore.odmKMeans(data= TEST_DATA_TABLE, formulat= COLUMN1 ~ . )
> class(PREDICTIONMODEL)
[1] "ore.odmKMeans" "ore.model"
> save( PREDICTIONMODEL, file="test.model")
After this i quit the R session (without saving my workspace)   and then   create a   new R session and tried the following
# load a prediction model from a file
> load(file="test.model")
> ls()
[1} "PREDICTIONMODEL"
> ore.ls()
charcter(0)
You can see from above that ore.ls() is not printing anything after load(). However, ls() prints the loaded PREDICTIONMODEL.    Now, if i try to do scoring against the loaded predictionmodel, I get an error
> x <- data.frame(COLUMN2="CC_PROCESSING", COLUMN3="CallWorkflow", COLUMN4="CallWorkflow", COLUMN1=NA)
> X <- ore.push(x)
>
> result<- ore.predict(PREDICTIONMODEL, X)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-40284: model does not exist
So, it seems that even though i imported the model from the file, ORE is still not aware of it .   Any idea about this ?

About Import and Export question!

Similar Messages

Maybe you are looking for