About nonfatal runtime error in CVI
Good day
My programBNumberOfRecord() gets a nontatal runtime error when I debug it, if I press continue it gets normal work. So I think the error dialog is improper, but i cannt skip it.
Can i skip the error when debugging? thank you!
Solved!
Go to Solution.
During debug of an application under development it may be excessive to filter out all library error messages. In this case you can enclose your faulting instruction between a pair of SetBreakOnLibraryErrors () calls that disable and then re-enable popup error messages.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Similar Messages
-
A problem about ABAP Runtime Error
Now i am responsible for writing a program, including an internal table, which will store 3 million Datensätze.
But when ich ran this program, an error happened:
Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED
Short Text:
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was not available.
CALL FUNCTION 'RRX_GRID_CMD_PROCESS' "Query ausführen
EXPORTING i_handle = g_handle
i_cmdid = 'STRT'
i_iobjnm = g_iobjnm
IMPORTING e_max_x = g_x
e_max_y = g_y
TABLES i_t_ranges = g_t_ranges
e_t_dim = g_t_dim
e_t_mem = g_t_mem
e_t_cel = g_t_cel
c_t_prptys = g_t_prptys
e_t_atr = g_t_atr
e_t_grid = g_t_grid
e_t_ranges = g_t_ranges
e_t_con = g_t_con
e_t_fac = g_t_fac
EXCEPTIONS inherited_error = 1
no_record_found = 2
terminated_by_user = 3
no_processing = 4
no_change = 5
dbcl_nosupport = 6
no_authorization = 7
x_message = 8
screen_canceled = 9
launch_url = 10
OTHERS = 11.
IF sy-subrc ne 0.
CALL FUNCTION 'DEQUEUE_E_BIW_IOBJ' EXPORTING IOBJNM = 'U_SSTMON'.
raise QUERY_RUN_ERROR.
endif.
if not p_sstmon is initial.
delete from /bic/pu_sstmon.
endif.
CALL FUNCTION 'DEQUEUE_E_BIW_IOBJ' EXPORTING IOBJNM = 'U_SSTMON'.
Output der Query in schlanke Tabelle mit erstem Feld 'y' umladen...
loop at g_t_grid into wa_g_t_grid.
i_grid-y = wa_g_t_grid-y.
i_grid-x = wa_g_t_grid-x.
i_grid-data = wa_g_t_grid-data.
if i_grid-data(1) = m1. "Hochkomma entfernen
shift i_grid-data.
endif.
append i_grid . Error happened hier
endloop.
refresh g_t_grid.
sort i_grid by y x.
Who could give me some suggestion to solve this problem?
Thank you in advance.thank you for your info.
I think that using package size is only choice to avoid the huge internal tabel.
But now i have a question. I must sort this internal table. When i use package size, then i can only sort a part of internal table. This will cause data uncorrect.
SELECT * FROM zubpgrid INTO TABLE i_grid PACKAGE SIZE 10000.
Legende des Grids auswerten (1. Zeile)...
SORT i_grid BY y x.
LOOP AT i_grid.
if i_grid-y ne 1. "1. Zeile Ende
exit. "loop at i_grid
endif.
leere Titel in der RSRT-Ausgabe fehlen in der int. Tabelle.
Sie sind Texte zum Vorgängerfeld und werden hier für die Steuerung
eingefügt, mit Name der Schlüsselfeldes + '_TXT'
l_v_delta_x = i_grid-x - i_gridlegende-x.
if l_v_delta_x > 1. "da fehlte was
concatenate i_gridlegende-data '_TXT' into i_gridlegende-data.
add 1 to i_gridlegende-x. "das fehlende x
append i_gridlegende.
endif.
jetzt das aktuelle Feld aus i_grid...
i_gridlegende-data = i_grid-data.
i_gridlegende-x = i_grid-x.
append i_gridlegende.
DELETE i_grid.
ENDLOOP.
ENDSELECT
Who could help me to solve this problem?
Thanks in advance! -
How to solve dreaded Microsoft Visual C ++ Runtime error?
Hi,
This is my first post. Grrrrr!
I recently installed 2.5 after having 2.4 and 2.3 and everything has been running along great...until tonight.
When I tried to open 2.5 I get the following message:
"Microsoft Visual C ++ Runtime library
Program C :/ prog
This application has requested the runtime to terminate in an unusual way. please contact the application's support team for more info"
I have checked out on line for a work around but there doesn't seem anything that makes clear sense....ie looking for a state-.dat file that doesn't seem to exist in my computer (PC vista xp).
I have also seen that holding down the cntrl button when opening Lightroom can overcome the problem, which it does, at least up until it asks me to create a new directory, but I have no idea what I'm supposed to do to create a new directory.
Another thing, I notice that in my program files that I have both 2.4 and 2.5...I don't know if that's behind the conflict.
Many thanks,
AdrianI think you will find that the older LR folder is almost empty and so you'd have to reinstall 2.4 to get it running again and that wouldn't be the first thing to try.
A message about C++ Runtime error really doesn't indicate a particular problem but there are several possibilities:
1) Hard disk error or corruption where running a ScanDisk or ChkDsk or whatever it is called nowadays might help fix the problem.
2) Corrupt program files. Reinstalling might fix that.
3) A corrupt catalog, where holding down Ctrl (or Alt) when starting up LR will allow you to create a new catalog or at least open a different one, which might work, and get you past the error. Then you'd need to go to a backup catalog and redo all your work since then, where if you've been writing changes to XMP files, it would be a lot easier.
4) A corrupt preferences file. Navigate to C:\Users\[yourusername]Steve\AppData\Roaming\Adobe\Lightroom\Preferences and at least rename the whatever.agprefs file to whatever.agprefsX or something and then restart LR and see if things work differently.
5) An errant plug-in you've recently installed.
Item 4 might be the easiest to try and be the easiest to recover from, where all you'd need to do is re-adjust your settings, again, I think.
Item 3, a corrupt catalog, is also easy to test for, but recovery is more difficult. -
How to show the detail information of web dynpro runtime error
hi,
I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
But when i do the same on server-2,there just show something like:
500 Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version, i have setup the 'developmode' value is 'true' in VA)
Edited by: BingLin Zhong on Feb 18, 2008 2:22 AMFollow SAP note - Note 962319 - Detailed error messages with stack trace in Web Dynpro
Thanks,
Praveen
PS.Dont forget to reward points -
Lab Windows CVI call produces runtime error in VS 2012
Making a call to CVI Lab Windows -- NI VISA Libary in Resource Template -- the funtion viInstallHandler
It complies/buids into a Visual Studio 2013 project. But runiing the program on a Windows 7 machine it produces a Runtime Error.
Dose anyone have any answers or ideas???Hi jpike52,
Actually this forum is to discuss the VS IDE, as you said that if it is related to the specific project, I'm afraid that it is not the correct forum for this issue.
To help you find
more appropriate
forum, would you mind letting us know more information about it?
For example, which language did you use in your project, C#, VB or others? Which kind of project did you create, web or WinForm or others?Please let me know more
information, I will help you find a better development forum for it.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I downloaded Itunes and keep getting a runtime error R6034 and was told to contact Itunes about problem/
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
The message is as follows:
X Runtime Error!
Program:c\Program Files (x86\Incred.Mail\Bin\ImApp.exe
This application has requested the Runtime to terminte it in an unusual way.
Please contact the application's support team for more information.Hi gergesmich,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
I'm getting a non-fatal runtime-error when trying to execute the CVI example (tktds1k2k_example.c) included with the IVI Instrument drivers for the Tektronix 2024. The error occurs on the line
viCheckErr (viSetBuf (io, VI_READ_BUF | VI_WRITE_BUF, 4000));
and the error is "The given session does not support this operation."
For some reason if I'm running in simulation mode the error won't occur and the example runs fine. But when I disable simulation (Simulate=0) then i get the error. The compiler says the error is non-fatal but if I continue execution I will get "Driver Status.. The given session does not support this operation." and the program exits.
Does anyone know what to do about this issue?Noel, I'm using a GPIB bus with the resource string "GPIB0::1::INSTR" and my options string is "Simulate=0,RangeCheck=1,QueryInstrStatus=1,Cache=1,DriverSetup=Model:2024". I'm able to query the id and also send commands to my instrument using MAX so I think the communication is working. I have MAX 3.0 with IVI Compliance Package 2.1 and NI-VISA 3.0.1 installed currently.
-
Could someone help me with a Runtime Error while saving a PDF file?
While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
PamIt is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
I open the pdf file
A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
I select ok
then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam -
Runtime error in CRMD_SALES_MASS transaction
Hi Gurus,
I have to enhance the transaction CRMD_SALES_MASS to add few custom fields to it.
I am trying to execute the transaction but I keep getting a runtime error in a standard Function Module CRM_SALESORDER_MASS_SELECT that is meant for the MASS Transaction. I have gone through many notes but I could not find anything which is relevant. Please help me with this! Please find the below dump if it can help.
Runtime Errors CREATE_DATA_UNKNOWN_TYPE
Except. CX_SY_CREATE_DATA_ERROR
Date and Time 09.12.2010 05:11:12
Short text
CREATE DATA: The specified type "CRMT_SALESORD_MASSUPDATE_ITEM
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCRM_SALES_MASS_UPDATE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.Hi Nisha,
Thanks for the reply.
I got to know the issue with the function module before I saw the reply. It has something to do with the type that is used in CREATE DATA statement. The statement at line 51 should have been as below
CREATE DATA ls_selecttable_ref type (tabname-name).
but the type mentioned tabname in standard FM is a structure of type MASSTABLESTAB.
Now I have another question. If we are to implement MASS transaction for Service contracts in CRM how are we supposed to do it? I am talking about SAP GUI and not the WebUI here.
Regards,
Mahesh -
Dump : Runtime Errors DBIF_RSQL_INVALID_RSQL
Hi Experts,
I got a dump at the select statement in the production during the excution.The Details of the program are :
DATA : BEGIN OF it_ekko OCCURS 0.
INCLUDE STRUCTURE ekko.
DATA : END OF it_ekko.
START-OF-SELECTION.
SELECT * FROM ekko
INTO TABLE it_ekko
WHERE ebeln IN p_ebeln
AND aedat IN p_aedat
AND bsart IN p_bsart
AND lifnr IN p_lifnr.
In ST22, the description of dump details is as follows.
<b><u>What happened?</u></b>
Error in ABAP application program.
The current ABAP program "ZMMRP126_1" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program.
<b><u>Error analysis</u></b>
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
caught, which
led to a runtime error. The reason for this exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
<b><u>Source Code Extract</u></b>
001830
> SELECT * FROM ekko "read through purchase orders
001850 INTO TABLE it_ekko
001860 WHERE ebeln IN p_ebeln "for order number
001870 AND aedat IN p_aedat "created date
001880 AND bsart IN p_bsart "document type
001890 AND lifnr IN p_lifnr.
001900
001910 LOOP AT it_ekko INTO ekko.
001920 PERFORM process_items. "read, check and save line items
001930 ENDLOOP.
<b><u>Contents of system fields</u></b>
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 <b>SY-DBCNT 69682</b>
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM SY-TITLE Purchase Order Receipt Status
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1 5000098347
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kindly help me to solve out this issue.
Thanks & Regards,
Krishna Kishore .Khi,
I think you declared p_ebeln as parameter and used in where condition with IN operator.
Could you change with EQ operator.
Or If p_ebeln is select-oprions means check you are giving high range in the selection screen for the input values.
try to check by giving 1 purchase order i.e p_ebeln = 'XXXX' only.
dont give range.
If output is big range means program goes to dump.
are you trying to modify EKKO table in the program?
Please reward if its useful.
Thanks
Sivaparvathi
Or -
Hi All,
I am loading a COPA cube from a DSO.
There are about 15million records to be loaded. every time i try loading the data, 1 or 2 Data packages gets stuck and finally it leads to a runtime error DBIF_RSQL_SQL_ERROR with exception CX_SY_OPEN_SQL_DB.
When i checked in SM21 transaction code, i got the following message
10:41:52 BTC 018 500 AMRUKV BY O Deadlock occurred
10:41:53 BTC 018 500 AMRUKV BY 4 Database error 60 at INS access to table /BIC/FCSDV
10:41:53 BTC 018 500 AMRUKV BY 0 > ORA-00060: deadlock detected while waiting for resource
10:41:54 BTC 018 500 AMRUKV AB 0 Run-time error "DBIF_RSQL_SQL_ERROR" occurred
10:41:58 BTC 018 500 AMRUKV AB 1 > Short dump "080818 104154 s0173bel PB100 " generated
10:41:58 BTC 018 500 AMRUKV D0 1 Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20080818104154s0173bel_PB1_00 AMRUKV 500 )
In transaction code ST22 i got the following message:
Runtime Errors DBIF_RSQL_SQL_ERROR
Exception CX_SY_OPEN_SQL_DB
Date and Time 18.08.2008 10:41:54
Short text
SQL error in the database when accessing a table.
What happened?
The database system detected a deadlock and avoided it by rolling back
your transaction.
What can you do?
If possible (and necessary), repeat the last database transaction in the
hope that locking the object will not result in another deadlock.
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in procedure "WRITE_ICFACT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
How to correct the error
Database error text........: "ORA-00060: deadlock detected while waiting for
resource"
Internal call code.........: "[RSQL/INSR//BIC/FCSDVD_C02 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"GPD3UMZD6V4YAKZAIWAOCYLV07Y" or "GPD3UMZD6V4YAKZAIWAOCYLV07Y"
"WRITE_ICFACT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"WRITE_ICFACT" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can anybody suggest on what can be done?
Thanks in Advance,
Regards
A.THi ,
This is a table space issue....
u will be getting a Dump...as DBIF_RSQL_SQL_ERROR check in ST22. in this DUMP if u scroll down u will find the table for which this is failing. Actually this is like some of the table related to the DSO is not having sufficient space to cary out the transaction. hence it is failing.
U can also see in DB02--> Deadlock....u will see that there is a deadlock for this table. So find the table from ST22 and ask ur basis team to increase the space for this table....
This can be solved only by increasing the space of the table...no other solution....ask help from ur basis team.
Thanks
Sandeep -
BI Admin Cockpit - Portal Runtime Error
Hi,
We have BI 7.0 (NW 7.0 with EHP1) BI_CONT 704. It is a dual stack (ABAP+JAVA) installation.
We have deployed "BI Administration 1.0" on the java stack. All the configurations are done as per notes.
Error is faced when trying to access BI Admin cockpit from portal.
When we click on BI Administration -> Data Load Status it should load two selector iViews in the left hand pane but it gives error.
Error message is given below:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 03:02_06/08/10_0022_406159550
Refer to the log file for details about this exception.
Please help.
Regards,
YaitnDefault trace is attached herewith:
#1.5 #001A64594CA200360000001100000CEC00048D20941D9F94#1281070970280#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#A100678#8809##GLBWI741_BC1_406159550#A100678#5c89db70a11711df87a4001a64594ca2#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error#1#/System/Server#Java###Exception ID:03:02_06/08/10_0022_406159550
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : com.sap.portal.layouts.framework.dynNavArea
Component class : com.sapportals.portal.pb.layout.PageLayout
User : A100678
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:444)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
at com.sapportals.portal.pb.layout.PageLayout.doContent(PageLayout.java:82)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.pb.PageBuilder.includeLayout(PageBuilder.java:1038)
at com.sapportals.portal.pb.PageBuilder.doContent(PageBuilder.java:517)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.component.CachablePortalComponent.service(CachablePortalComponent.java:273)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.navigation.DynamicNavigationArea.doContent(DynamicNavigationArea.java:65)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: Error occurs during the compilation of java generated from the jsp
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:116)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
... 31 more
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2215)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:81)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:140)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:291)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:141)
... 34 more
#1.5 #001A64594CA200360000001300000CEC00048D20941DA66C#1281070970280#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#A100678#8809##GLBWI741_BC1_406159550#A100678#5c89db70a11711df87a4001a64594ca2#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error##Java###03:02_06/08/10_0022_406159550
[EXCEPTION]
#1#com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error occurs during the rendering of jsp component
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2215)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:81)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:140)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:291)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:141)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
at com.sapportals.portal.pb.layout.PageLayout.doContent(PageLayout.java:82)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.pb.PageBuilder.includeLayout(PageBuilder.java:1038)
at com.sapportals.portal.pb.PageBuilder.doContent(PageBuilder.java:517)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.component.CachablePortalComponent.service(CachablePortalComponent.java:273)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.navigation.DynamicNavigationArea.doContent(DynamicNavigationArea.java:65)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in java compiling
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2206)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:81)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:140)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:291)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:141)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:355)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:934)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:527)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:680)
at com.sapportals.portal.pb.layout.PageLayout.doContent(PageLayout.java:82)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.pb.PageBuilder.includeLayout(PageBuilder.java:1038)
at com.sapportals.portal.pb.PageBuilder.doContent(PageBuilder.java:517)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.component.CachablePortalComponent.service(CachablePortalComponent.java:273)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sapportals.portal.navigation.DynamicNavigationArea.doContent(DynamicNavigationArea.java:65)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534) -
Adobe Acrobat 9.0 Pro crashes at start up: Runtime Error-please help
I have Adobe CS4 installed on my Windows 7 PC. In addition, I have Adobe Reader XI and InDesign 6 installed. If I remember correctly, after I installed Adobe Reader XI, I uninstalled the version of the Reader which came with CS4.
So here’s my problem: When I try to download a PDF that has been sent to me in an email or open one that already exists on my computer, this happens:
Runtime Error!
Program: C…
The application has requested the Runtime to terminate it in an unusual way.
When I click OK, I get this:
Adobe Acrobat 9.0 has stopped working.
If I try to Adobe Acrobat 9.0 Pro from my start menu, the same thing happens.
This makes no sense to me because
I don’t have the knowledge to figure this out. I have no idea what Runtime is.
Prior to a computer meltdown a couple of months ago and a complete reinstallation of everything, these very same programs all worked just fine.
I don’t understand why, when I try to open an emailed PDF, they don’t automatically open in Adobe Reader XI rather than Adobe Acrobat. Isn’t the general idea that people be able to open and view sent PDFs which they have been sent, which is what the Reader is for, and not usually edit them, which is what Adobe Acrobat is for?
If, instead of trying to open the emailed PDFs, I save them to my computer, I can launch Adobe Reader XI and open them from within that program without any problem. That’s OK if I just need to view the PDF, but I need to be able to edit PDFs too, so I must get Adobe Acrobat 9.0 to work.
Would reinstalling Adobe Acrobat 9.0 Pro help? Is there a way to reinstall that program only from the installation disks or would have to reinstall CS4 entirely?
I cannot open Adobe Acrobat 9.0 at all, so any solutions which must be done with the program open are not possible.
I would really appreciate some help.SOLVED!
Resetting Internet Explorer didn't work, Reinstalling Acrobat 9.0 Pro didn't work, but changing a registry key did.
Here's where I found the solution:
Microsoft Visual C++ Runtime Library error opening PDF files - Microsoft Community
Here is the relevant post, but before you try it, read my note below:
Hi,
This is known issue with Acrobat for several versions now, Adobe's current fix is just to update their software: http://kb2.adobe.com/cps/404/kb404597.html
The problem is with the application data being misdirected.
"The affected user has a redirected Application Data folder and as a result the network path containing the Application Data uses a UNC path that begins with \\. This UNC path causes Acrobat 9.0 or Adobe Reader 9.0 to incorrectly parse the Application Data path and give the error message."
A potential Solution would be to go into the registry. Left Click type "regedit" and right click and run the program with "run as administrator". Go to Hkey_Current_User\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders and make sure see where "AppData" is pointing. If it is pointing to "%UserProfile%/Application Data" change it to point to "%UserProfile%/AppData/Roaming".
BUT, be careful about one thing: This poster seems to have accidentally used forward slashes when he should have use back slashes. Look at the very last line of his post where he advises "If it is pointing to "%UserProfile%/Application Data" change it to point to "%UserProfile%/AppData/Roaming". You'll find, or at least I did, that this key has a back slash, not a forward slash, so changing what I found: "%UserProfile%\Application Data" to "%UserProfile%\AppData\Roaming" worked and now Acrobat 9.0 works fine. -
Hi,
Following code is working fine in Development system and in Production system I am getting a runtime error. Only difference I am finding is in r_lifnr value. In development system I have few lifnr and in Production system it's not so... am I getting error because of it? Is there any restriction to no. of items populated in a range? Or Basis person need to change any parameter? Enclosed the detail dump below the code...
Advance thanks.
Regards,
Balaji Viswanath.
Code:
SELECT bukrs
lifnr
augdt
augbl
zuonr
gjahr
belnr
buzei
waers
dmbtr
wrbtr
zlsch
shkzg
blart
gsber
sgtxt
INTO TABLE t_bsak_tmp
FROM bsak CLIENT SPECIFIED
WHERE mandt = sy-mandt AND
lifnr IN r_lifnr AND
bukrs IN s_bukrs AND
augdt IN s_augdt AND
blart IN s_blart.
IF sy-subrc <> 0.
No data found for selection criteria
MESSAGE i018.
LEAVE LIST-PROCESSING.
ENDIF.
Dump:
Runtime Errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
Occurred on 14.11.2005 at 14:35:22
Error in the module RSQL accessing the database interface.
What happened?
Error in ABAP application program.
The current ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P" had to be terminated
because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"GET_CLRD_VEN_DATA" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
How to correct the error
The exception must either be prevented, caught within the procedure
"GET_CLRD_VEN_DATA"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
The SAP Open SQL statement must be divided into several smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use the addition FOR ALL ENTRIES
instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC
"/DS1/FI_CR_REPT_PGSR802_VEND_P" or "/DS1/FI_CR_REPT_PGSR802_VEND_P"
"GET_CLRD_VEN_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ztm1003"
Network address.......... "145.26.160.103"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C004DC4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 6
Short dump setting....... "full"
Database server.......... "ztm1003"
Database type............ "ORACLE"
Database name............ "A94"
Database owner........... "SAPR3K"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 7 2005 20:44:35"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "85"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE
10.1.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
User, transaction...
Client.............. 110
User................ "INBVI0"
Language key........ "E"
Transaction......... "SE38 "
Program............. "/DS1/FI_CR_REPT_PGSR802_VEND_P"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
in "GET_CLRD_VEN_DATA".
The main program was "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
The termination occurred in line 503 of the source code of the (Include)
program "/DS1/FI_CR_REPT_PGSR802_VEND_P"
of the source code of program "/DS1/FI_CR_REPT_PGSR802_VEND_P" (when calling
the editor 5030).
Processing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
procedure "GET_CLRD_VEN_DATA" "(FORM)" but was not handled locally, not
declared in the
RAISING clause of the procedure.
The procedure is in the program "/DS1/FI_CR_REPT_PGSR802_VEND_P ". Its source
code starts in line 501
of the (Include) program "/DS1/FI_CR_REPT_PGSR802_VEND_P ".
Source code extract
004730 &----
004740 * get country names from t005t
004750 ----
004760 FORM get_country_names.
004770
004780 t_lfa1_land[] = t_lfa1[].
004790 SORT t_lfa1_land BY land1.
004800 DELETE ADJACENT DUPLICATES FROM t_lfa1_land COMPARING land1.
004810
004820 IF NOT t_lfa1_land[] IS INITIAL.
004830 SELECT land1
004840 landx
004850 INTO TABLE t_t005t
004860 FROM t005t
004870 FOR ALL ENTRIES IN t_lfa1_land
004880 WHERE spras = sy-langu AND
004890 land1 = t_lfa1_land-land1.
004900 REFRESH t_lfa1_land.
004910 SORT t_t005t BY land1.
004920 ELSE.
004930 MESSAGE i014 WITH 'No vendor data fetched'(001).
004940 ENDIF.
004950 ENDFORM. " get_country_names
004960 &----
004970 *& Form get_clrd_ven_data
004980 &----
004990 * Cleared vendor data
005000 ----
005010 FORM get_clrd_ven_data .
005020
> SELECT bukrs
005040 lifnr
005050 augdt
005060 augbl
005070 zuonr
005080 gjahr
005090 belnr
005100 buzei
005110 waers
005120 dmbtr
005130 wrbtr
005140 zlsch
005150 shkzg
005160 blart
005170 gsber
005180 sgtxt
005190 INTO TABLE t_bsak_tmp
005200 FROM bsak CLIENT SPECIFIED
005210 * the order of the fields are as in the secondary Index.
005220 WHERE mandt = sy-mandt AND
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 59
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM
SY-TITLE Vendor Payment Details for IRD
SY-MSGTY I SY-MSGID SF
SY-MSGNO 616 SY-MSGV1 /DS1/FI_CR_REPT_PGSR802_VEND_P
SY-MSGV2 RE SY-MSGV3 EN
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
2 FORM GET_CLRD_VEN_DATA
/DS1/FI_CR_REPT_PGSR802_VEND_P
/DS1/FI_CR_REPT_PGSR802_VEND_P 503
1 EVENT START-OF-SELECTION
/DS1/FI_CR_REPT_PGSR802_VEND_P
/DS1/FI_CR_REPT_PGSR802_VEND_P 135Hi Balaji,
Here is what the dump said and my answers are right below them.
<i>Possible errors:</i>
o The maximum size of an SQL statement has been exceeded.</i>
This may not be the reason in your case. This usually happens when you use the option FOR ALL ENTRIES
<i>o The statement contains too many input variables.</i>
Most likely this is your issue. I think your r_lifnr is filled with all the vendors in your system and filled as single values. In that case you may be exceeding a limit set on the system. Instead of trying to remove this setting, what I would suggest is to do the following.
Define a select-option for LIFNR on your selection screen. This way users can have the flexibility of specifying certain vendors. If they don't enter anything, it is still ok. Don't fill it with single values.
Use this select-option in your select statement. After the select statement, do a delete from itab where the vendors are not in your r_lifnr as below.
DELETE t_bsak_tmp WHERE NOT lifnr IN r_lifnr.
Also, avoid using client. You don't need that unless you really want to select from a different client other than your logon client. Your select statement is using logon client anyway, so you don't need to specify that.
<i>o The space needed for the input data exceeds the available memory.</i>
If the above changes are made and the problem is still there, then this is the next thing to look at.
Srinivas
Maybe you are looking for
-
When do you go for non cumulative key figures?
hi all, Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures. Can anyone explain me with an example. thanxs in advance hari
-
There's no proper way to export charts to PDF in numbers 3
In Numbers 09, there're at least two ways. 1. copy the chart and paste to preview with `New from clipboard`, although this has some bugs on the chart format 2. Copy to pages, export as RTFD, and extract the pdf in the package. However, when upgraded
-
i am having a problem with my all in one deskjet wireless connection it says wps time out . I have vista it is makeing me crazy
-
Drop Shadow parameter causes flickering
I seem to remember seeing this problem occasionally some time ago but now its worse. Drop shadow" parameter seems to yield a flickering result. I check drop shadow and set both blur and distance to say 16. Looks perfect on the screen. Then I render t
-
i am looking for an example of using cfscript to pass varibles into a query and NOT HARDCODED into the addParam value attribute. Sugesstions ?