About printer!!Please come in!

I have installed Solaris 8 x86(10/01).Ip address is 192.168.1.32.The printer is installed on another computer,Ip address is 192.168.1.20.
Can I use the printer?
How to use?

Type the following command in command mode:
lp -d < remote printer name > < file name >
Hope it helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Similar Messages

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnafing glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

I don't know if this is a Firefox problem so I ask, When printing how come it always prints so small I nearly need a magnifying glass? Is this caused by something else I may have set incorrectly? help please, from a very satisfied Firefox user

This only happens when I'm in my browser. Ex. when I'm on a site and I decide I like what I see and want to print it text that is, my printer always prints tiny. When I'm in Microsoft Word for ex. I print it and it looks like what I expect. So I don't know if somehow my printer got set to print tiny when on the web. If you can help me I would be most appreciative. Thanks again for your response.

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

How to go about Printer Management

Hi all,
PLease let me how to go about printer managemt in a huge project with 1000 users.
We can put it in 3 phases.
1. Requirememt Gtahering
2. Architecture defination
3. Implimenting it in SAP
Well i have gone through all SAP help documents. But still I am not clear how to go about it.
What should be the details i need to finalize architeture and how printer defination and testing should be done.
Can anyone also provide some templates or formats for it.

Hello Hussain..
> 1. Requirememt Gtahering
> 2. Architecture defination
Planning SAP print Architecture:
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/ea/a4ef3b11a17a0ae10000000a114084/frameset.htm
> 3. Implimenting it in SAP
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/7e/36e4c4023411d399b70000e83dd9fc/frameset.htm
Hope this helps you..
Cheers,
Jazz

Question about "Print Size"

I am confused and puzzled about "Print Size." First I select the Zoom Tool, then I click "Print Size" in the upper bar. I also have chosen View > Rulers.
What I don't understand is that one inch in the horizontal ruler actually is considerably longer than one inch on the vertical ruler. I think this is distorting the appearance on my photos in the monitor as compared with the actual prints. The monitor version of my portrait, for example, looks fatter than the printed version. Why is this and why isn't a horizontal inch equal to a verical inch for viewing purposes.
Thank you very much for any help on this.
Bob

Thank you very much. I changed my monitor to its native resolution and I think this solved the problem. Bob
J Maloney <[email protected]> wrote:
Change the screen resolution setting in your PS prefs to your display resolution. Then print size will work as expected.
http://en.wikipedia.org/wiki/List_of_displays_by_pixel_density
More about the print size feature:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7935a.html
>

Trying to print in iPhoto. Tells me no theme is installed but no print box comes up

Trying to print in iPhoto. Tells me no theme is installed but no print box comes up. Able to print from preview so it is not my printer

Thanks for the suggestion Larry. This discussion is for iPhoto 7, and says to do a custom install using the system disk that came with my computer. Since I recently installed iPhoto 11 from iLife, should instead reinstall from the iLife disk, rather than the system disk that came with my computer?
Yes
Also, I just want to make sure that in deleting all the files listed in this discussion, that I won't be deleting my photos. Thanks!
You will not be deleting any photos or data about them - they are in your iPhoto library and you should not be going into it -- ever
LN

If SIRI works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question

if SIRI application works on iphone 4? if there is any way for ask using iphone 4 can have this application? just let ask know if will work or not, because if not so we will not think about it. please somebody answer my question. my iphone 4 are already update for iOS 5. I'm searching in the internet forum some are saying that it's only work if your iphone are jelbreak, and the problem is i don't want my iphone to be jelbreak. thanks for reading my question. and please send the question on my email many thanks....
<Email Edited by Host>

What else is there? There's Siri, A5 chip, 8MP camera, intelligent switching between antennas. Those are the only new things in the 4S. Like I said, if Siri was on the 4, fewer would buy the 4S. Second, the 4 is discontinued to make room for the 4S, so there will be no updates exclusively for the 4. Third, I never trust any reports on the Internet unless it comes directly from the company (in this case, Apple).

I have update my iphone, 4 days ago and now when i try to connect it to a network it says unable to join and before i update, it worked perfect so if u guys know anything about it please let me know

i have update my iphone, 4 days ago and now when i try to connect it to a network it says unable to join and before i update, it worked perfect so if u guys know anything about it please let me know!
           sincerly
                 Afghanpro

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If not backup you MAY be able to get some info from the restored iPod via
How to perform iPad recovery for photos, videos
Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official
http://www.amacsoft.com/ipod-data-recovery.html
iPod recovery software to restore lost music files
-iPod touch Deleted Photo Recovery Tips You Should Know

Question about printing by page count

Hi
I'm new to this and I have a question about printing our invoices by page count.
We generate our invoice using Crystal 2008 we have invoices that can range from a single page to as many as 6 pages. I would like Crystal to preview/print the reports in order of how many pages are in the report. Example: print all single page invoices first then all invoices that are 2 pages and so on. Is this possible?
Thank you in advance

Hi Ido,
Thanks for your input. This is more or less what Carl was suggesting yesterday and I gave it a lot of thinking. The problem here is that I cannot go with "good enough resolution" - I need perfect resolution.
The reason for this apparently silly requirement (why would one sort a bunch of invoices by number of pages instead of Customer Number, as long as they end up in an envelope anyway?) is the proposed purchase of a folding/stuffing machine which could do very fast what now takes one person 4 days to achieve.
One type of machine comes with three settings - fold/stuff 1, 2 or 3-page statements. You need to have three stacks with all the statements that have 1, 2 and 3 pages. The ones with more pages will have to be folded manually, but there are only about two dozen clients that give us that much business. You feed the machine one stack at a time and set it to process the respective number of pages. Any statement that falls accidentally in the other stack will either cause the whole rest of the stack to be mixed up, which is very bad, or cause one customer to receive his invoice and someone else's, which is just embarrassing. I cannot afford any of these scenarios.
Given that the statement contains variable-length (and depth) messages that vary by month and by profit center, and it could also contain one or more groups of details, each with its own header, it is very risky to try to come up with magic numbers attempting to estimate the number of pages based on the number of detail lines. Someone will still have to eyeball very carefully the initial stack of statements in the areas where the number of pages increases by one and make sure that ordering by number of detail lines did not mix, for example, one report with two pages among two reports with one page. Of course, this increased scrutiny will be necessary only around the areas where the page number transitions from 1->2, 2->3 and 3->4, which is much better than trying to order by number of pages all 1500 statements, but still depends on one's manual intervention and focus and, as a result, makes me pretty uncomfortable.
I have taken a look at the "Group Sort Expert". If you select the "All" option (all groups) and you had some kind of summary value then you could sort the report by that value. The idea was to create a hidden Average field over the TotalPageCount runtime variable (which will always equal the TotalPageCount for that customer, since it's the same for all the pages in that group) and use that summary field in the "Group Sort Expert", which would have solved the problem elegantly. Unfortunately, there is no way to create a summary field over a runtime variable. I even created a formula that just returns the TotalPageCount, but that formula did not show up in the list of fields available for summarization (while other formulas did).
It looks like the reporting engine does not allow this type of "late-sorting". I wonder if it is possible at all, because in effect this would require the engine to execute an additional pass: first it should somehow generate the whole report grouped by Customer Number so it knows how many pages are in each group, then it should sort by the number of pages and only after that it could render the report. I'm not sure the engine can do this additional pass.
I would be very curious to hear about the other (more complex) ideas you mentioned. For example, I have seen (in Crystal 2008) a checkbox allowing "sorting by a formula". I don't know how to write a formula used in sorting, but the basic question in the paragraph above still stands: does the engine even support such a feature?
Thanks again.

Please Verizon can you please come to my street?

ive been waiting on Verizon for about a year and month now. about a year ago i called to see if it was available to have my heart broken with a no. so i waited and i waited and i waited , every two weeks checking online and calling in to see if it was available to get heart broke once again every week. last month my friend which lives about 2 blocks from my house got Verizon fios service. i was so upset but i didnt give up on Verizon i kept checking and calling. and now im loosing hope , cable vision is trash and i want to get rid of it. the cable is horrible , the internet is slow ( want an example : http://bit.ly/hqpHjt ) for the 190 dollars im paying for phone , internet and cable i shouldn't be suffering so please come to my area Verizon im dying. Area , {edited for privacy}

Thank you so much for your interest in Verizon. We don't have exact dates of availibility for certain areas. We do put updates on our blog so you can bookmark it and periodically check for updates on availibility. Thanks, sorry I did not have specifics.
http://forums.verizon.com/t5/Verizon-at-Home/bg-p/ResidentialBlog
Thanks,
Constance
Constance
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan. Follow us on Twitter™!

Hello, my friend's ipad locked and need the apple id and password to unlock the setup and open the ipad but he don't remember any one of them nor his email and security questions what can we do about that please solution?

hello, my friend's i pad locked and need the apple id and password to unlock the setup and open the i pad but he don't remember any one of them nor his email and security questions the serial number of tha i pad is DYT*******PH and the part number is MC979ZP/A what can we do about that please solution?
<Edited by Host>

Your friend will have to remember or find his account id and password, without them he won't be able to re-activate the iPad.
Does he have any of the account's downloads in his computer's iTunes library : Recovering a forgotten iTunes Store account name.
Or has he tried finding it via http://appleid.apple.com : Apple ID: How to find your Apple ID.
If he can find the account id he can then get its password reset via http://iforgot.apple.com
(As these are user-to-user forums, you're not talking to iTunes Support nor Apple, I've asked the hosts to remove the serial number from your post.)

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.

I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3

Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

Printing faxes come out black

I began using the Fax utility in 10.4.3 last week. The faxes are received without problem and stored as pdf files in a folder. When I open to read they open in adobe and look fine. When I print they come out with white text on a black background. Other pdfs not created by the fax print normally. Have tried various printers with same results. Any thoughts?

I am in the same boat - using a brand new Konica Minolta C450 Biz-Hub Expensive as can be printer with built-in Fiery. Same output, a black page from PDF'ed faxes. They even look good from the print dialog box in "Preview" mode. Then it prints black, with what appears to be a row of black thumbnails of the same page across the bottom.
The same fax PDF will print on my old HP 4050N, however, without any problems. I suspect that there is an issue between the creation specs used by Apple and the requirements on the Fiery. Maybe a similar issue for you as well.
Just throwing in my two cents to see if anyone may reply to this problem.

I am trying to buy mitril for hobbit kom but it always gives me error i have already added my card information to store but i cant buy it.Could u help me about it ,please?

I am trying to buy mitril for hobbit kom but it always gives me error i have already added my card information to store but i cant buy it.Could u help me about it ,please?

Wish I could help. My wife is having the same problem. Same computer for 2 years and all of a suddent it thinks this is her first purchase.

About printer!!Please come in!

Similar Messages

Maybe you are looking for