About the gauge component

I develope report via visual composer and complie in "flash(flex2)" mode, but the gauge component is not colored and can not set alert zone. Is there any method to resolve the problem, Please give me some help, thanks.

Hi,
just use the main menu of VC.
Tools --> Options
On the tab "Compiler" you can switch the runtime from "Flash (Flex2)" to "Flash"
Regards
Florian

Similar Messages

Confused about the Business Component Developer Certification

Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!

938334 wrote:
Excuse me, I´m confused...
How many certifications are about the Business Component Certification? Three??
I thought there was just one, the Business Component Developer, which is the 1Z0-860 code...
but I also have seen these:
Java EE 6 Enterprise JavaBeans Developer Certified Expert Exam - 1Z0-895
Java EE 6 Java Persistence API Developer Certified Expert Exam - 1Z0-898
and now I don´t know which one to study for...
Are these better? Or just different? Or are the last ones just the new ones and the 1Z0-860 is obsolete?
Thanks in advance!The basic answer to look at the question topics for each exam and and see what fits you. The question topcis should yield insight.
Additionally the following exam is an OCP
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_860
The other two are OCE, as far as I can tell. Typically more of an area in depth, but OCE's can vary.
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_895
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_898
I also notice the earlier exam is J2EE5; the later exams are J2EE6
Hope this helps a little, but this java stuff is too hard for me and i must stackdump.

A question about the Tree Component

I have try to use the tree component i a flash page, and
it´s going allright until I´ll want to link the content
to a page... WHY??
I have tried a lot of different codes here are those I tried:
<tree>
<folder label="Mine own">
<link label="My page" url="
http://www.mickesei.se" />
</folder>
</tree>
Nr2:
<tree>
<folder label="Mine own">
<link label="My page" link="
http://www.mickesei.se" />
</folder>
</tree>
nr3:
<tree>
<folder label="Mine own">
<link label="My page" href="
http://www.mickesei.se" />
</folder>
</tree>
nr4:
<tree>
<folder label="Mine own">
<link label="My page" get URL="
http://www.mickesei.se" />
</folder>
</tree>
But nothing seems to work, when I go mouse over it still a
arrow should it?
HELP ME PLEASE!!! Micke

Thanx Jeanne,
You brought me on a idea with the UIX Developer's Guide and EXPANDABLE_EXPANDED value.
I couldn't figure out how the expand property was filled, because it wasn't done in the ADF BC ViewObject. We have a Utility class that creates a DataObject from the ViewObject Data and here the expand property was set.
Now it was easy to build a ExpandAll option. It is possible to access the HttpServletRequest object were the DataObject is created. By setting a attribute in the request I could react on that and give the expand property indeed the value EXPANDABLE_EXPANDED.
Dennis

IAd Producer Question about the Gallery Component

Hi,
I would like to know how to make the Gallery component to be able to loop. I understand that I can use the Carousel component, but the required design of my clients looks similar with the Gallery Component. It just have to be looping and I'm done.
Thanks in advance!
Mark

The best way is to place a Carousel object in a View object and resize the Carousel until a given cell is the same size of the View. Make sure to check the "Clips to Bounds" setting in the inspector for the View and the "Snaps to Cells" setting for the carousel.
Views are containers so drop one on the canvas then double-click it to edit its contents then drop in your Carousel.
Here's what the View (and its settings) looks like with the Carousel inside:
Here's what the Carousel (and its settings) looks like when embedded in the View and selected.
-Mark

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

A better way to determine the current state of the FLVPlayback component?

Below is the AS3 code I have used to display images (MCs) over an instance of the FLVPlayback component. These images (one for loading, one for the title) are to appear – or disappear – according to the current state of the FLVPlayback component.
It “works,” but when testing, I have noticed that it can be rather finicky. The most common issue that arises is that many times the loadPoster movieclip will still be visible even though the video has entered the playing state.
Also, I wanted a title placeholder image to appear whenever the user stops the video or if the video completes. However, I had to add the conditional statement to the “stoppedStateEntered” case to make everything appear when expected. When the video is first viewed (and has completed buffering), it seems that the FLVPlayback component enters the stopped state before entering the playing state. Thus, the titlePoster would flash on the screen right before it and the loadPoster “should” disappear when the video begins playing.
Even in my limited testing, these issues were very easily re-created. I am definitely looking for a more reliable solution. Is there a better (or more correct) way to go about all this? If possible, I would like to stick with the FLVPlayback component, just for the simple fact of not having to code my own.
Where am I going wrong?
function updateMoviePoster(event:VideoEvent):void
                switch (event.type)
                                case "playingStateEntered":
                                                loadPoster.visible = false;
                                                titlePoster.visible = false;
                                break;
                                case "stoppedStateEntered":
                                                if (loadPoster.visible == false)
                                                                titlePoster.visible = true;
                                break;
                                case "complete":
                                                titlePoster.visible = true;
                                break;
myFLVPlayback.addEventListener(VideoEvent.PLAYING_STATE_ENTERED, updateMoviePoster);
myFLVPlayback.addEventListener(VideoEvent.STOPPED_STATE_ENTERED, updateMoviePoster);
myFLVPlayback.addEventListener(VideoEvent.COMPLETE, updateMoviePoster);

Any suggestions? I would truly appreciate the help.

The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component 'GUID′ in search application 'Search Service Application' is in a good state and try again.

Another post with a well-known title. Believe me, I know. Here's my setup;
- 1 Server 2012 WFE, SharePoint Server 2013, totally up-to-date, including the september 2014 hotfix
- 1 Server 2012 DB, SQL Server 2012
Installed SP 2013 using PowerShell, with the AutoSPinstaller. Worked like a charm. Got everything up and running, with some tweaking here and there to customize it to fit my situation. Now, I can't get the Search Service Application to work. Must have created,
deleted and recreated it at least 30 times. Used both PowerShell scripts, PowerShell line-by-line, Central Admin, heck, I even went so far as to use the configuration wizzard... No luck. I keep on getting the message that search cannot connect to the machine
that hosts the 'administration component'.
In order to avoid answers that suggest all the things I've already tried, here's a summary of the various scenarios I followed:
Tried both a dedicated application pool as well as the SharePoint Web Services Default
Timer job job-application-server-admin-service is running and not showing errors
IIS 8.0 is installed, so is .NET 4.5 (not the known perp of IIS 7.5 and .NET 4.0)
the get-SPEnterpriseSearchServiceInstance -local returns a healthy, online state
the SPEnterpriseSearchQueryAndSiteSettingsServiceInstance is also running
FireWall is disabled; registry has the BackConnectionHostNames modified with the necessary FQDNs
Accounts used to install and / or run the serviceapp all have sufficient rights - tried a dedicated managed account, SP_2013_SearchSvc, the SP admin account, and even the original Farm account; all to no avail, I keep on getting the error message.
Even tried stsadm to start the server search running - NOTHING WORKS!!!
As you might understand, this is driving me nuts. About to miss my second deadline, and no amount of IISresetting is making this go away. Been stuck on this issue for far too long, now (my searching is measured in days and weeks instead of hours, by now).
Whoever helps me solve this - you will have my eternal gratitude, and a nice bottle of Prosecco. Or whatever's your poison. You need to come get it, though. I´m situated in the Netherlands. Hey, you always meant to visit Amsterdam and see for yourself, right?
Thanks, community, for coming to my rescue!

Thanks again - Alas, I've been there. Deleted Search a dozen times, at least, and tried installing it, initially using a PowerShell script (tried several scripts actually, from full-blown total Search Applications with extensive topologies to the most basic
of basics 'please just start without showing me errors'), PowerShell line-by-line to see where things went South, next tried installing through Central Admin (hoping that it was my own stupidity in overlooking things and hoping The System would get it right
for me), and eventually even tried using the config wizzard as a total and utter last resort - Nothing worked.
At first, I found out that removing a Service App needs a *little* bit more work than simply removing it through Central Admin, but by now I can truthfully state that if there's one thing I've become supergood at, it's removing Search Service Applications.Totally.
I will check out the article, though - I realized early on in my SharePoint experience that regardless of what you think you know, there's so much more to find out. I know, that's almost philosophical. That is, my friends, indeed the point I've reached...

How to use the same component in different applications

Hi All,
I need to use the same component in different applications. i.e In opportunity, Quotation & Promotion.
The Search help view in the component PRD01QR should be used in all these components but with different search criteria.
With help of the DO_determine_configuration, different view configurations are possible but Different search criteria is not possible.
for Eg. search parameter without DDLB, F4 options in another components.
How can I control the behavior of the search view in different applications with restricting the field properties?
Is it possible to find out where and in which component these search_help_search component is used?

Hi Harry,
Is it possible to find out where and in which component these search_help_search component is used?
ans: I am giving an Example for your question go through that u might get clear about this.
Ex: BT115IT_SLSO sales order component
below screen they component usage using for populate the product search component.
please let me know any help required .
Regards,
vishwa.

I have a doubt about The Single-Thread Rule

The [url http://java.sun.com/docs/books/tutorial/uiswing/overview/threads.html#rule]Single Thread Rule states:
Rule: Once a Swing component has been realized, all code that might affect or depend on the state of that component should be executed in the event-dispatching thread.
I began to wonder about this because so much code seems to work just fine when it isn't executed in the event dispatching thread. Why are there exceptions? I went looking for some code which acted differently when executed on the event thread than when it was not. I found this
http://forum.java.sun.com/thread.jsp?forum=57&thread=410423&message=1803725#1803725
Now I started wondering why this was the case. What I found was that DefaultCaret adds a document listener to the document of the JTextComponent. In this listener, the insertUpdate() method specifically tests if it is running on the event dispatch thread and if it is, it updates the caret position.public void insertUpdate(DocumentEvent e) {
    if (async || SwingUtilities.isEventDispatchThread()) {
        // ... update the caret position ...
}I then copied the code from DefaultCaret and made a MyCaret. I needed to tweek the code a little bit, but it ran. I removed the event thread test. It worked outside the event thread. There was a small difference in the results though. The textarea did not scroll all the way to the bottom. Almost, but not quite. I didn't test enough to make sure this was the only problem, but there was at least one problem.
Now I started think about why this would be. The thought crossed my mind that the order of the events which were posted to the event queue were probably important. Sun found bugs when components were updated out of the event thread, so they essentially ignored events which weren't on the event thread and created the The Single-Thread Rule.
A few days pass. I'm starting to wonder if Sun could have done a better job making Swing components thread safe. I also don't know that this specific case I found was the rule or the exception to the rule. But without insight into the design philosopy of Swing, I would have to examine all their components and see how they have written them and see if I can come up with a better design. That sound like a lot of work. Especially without getting paid for it.
But wait a second, all you have to do is call the append() method of JTextArea on the event thread. If that is the case, why didn't they write the freakin component that way? Well, I'll try itclass MyTextArea extends JTextArea {
public MyTextArea(int rows, int columns) { super(rows,columns); }
public void append(final String text) {
    if (SwingUtilities.isEventDispatchThread()) super.append(text);
    else {
      SwingUtilities.invokeLater(new Runnable() {
        public void run() { myAppend(text); }
private void myAppend(String text) { super.append(text); }
}I change [url http://forum.java.sun.com/thread.jsp?forum=57&thread=410423&message=1803725#1803725]camickr's code to use a MyTextArea and it works fine without calling from the event thread. I've essentially moved The Single-Thread Rule to the component itself rather than relying on each and every one of the [url http://www.aboutlegacycoding.com/default.htm?AURL=%2FSurveys%2FSurvey6intro%2Easp]2.5 million Java programmers worldwide to use SwingUtilities.invaokeLater().
Now for my question...
Why didn't Sun do this?

Swing is slow enough as it is. Lets not make it slower
just
because dense "programmers" don't know what they are
doing.I agree with you in defending the current model, but aren't you a bit harsh there?!? ;-)
Well, there are a number of not-so-dense programmers that expect such high-level components to be thread-safe. The question is worth asking whether Sun intentionally favor the explicit thread management for performance reasons, or whether this was an oversight.
I'd go for the former (intentional) : indeed any GUI toolkit is inherently thread-based; there is always a distinction between the graphical thread(s) and the application threads - and the programmer always has to manage explicit thread creation to handle long-running event handlers without blocking the event dispatching thread. Extending thread concerns to the updating of components is therefore not a big move.
So it seems fair that a core GUI toolkit does not hide thread issues (though to the best of my knowledge there is no such limitation in updating AWT components), or at least that's what Sun deemed.
An ease-of-use-focused toolkit wrapping the core toolkit for thread-safety can be provided as a third-party product. Though I agree that wrapping the dozens of existing widgets and hundreds of methods is cumbersome - and the lack of such products probably shows it would have a low added value to trained developpers.
Because your way is an extra method call and if
statement, neither of which is necessary if you already know you
are in the correct thread. Now count the number of methods
which will need to be changed (and add up the extra cost).Indeed it's quite common to update several properties of several widgets in one bulk (when user clicks "OK", add a row to the table, change the title of the window, update status bar, re-enable all buttons, change some color,...).
In this case explicit thread management doesn't spare one if but a dozen of redundant ifs!
Note that there could have been if-less ways to cope for thread safety, such as creating a copy of the component's model when a change is made to a component, and switching the model only before paint() is called in the event-dispatching - of course coalescing all changes into the same "updated" model until paint() is called.
But this would trade ease of use for redundant memory consumption, especially for some components with potentially huge models (JTree, JTable, JTextArea,...). And Swing appears to be already quite memory-greedy!

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

How to get the local file system path of an image that loaded into the image component in cq5?

Hi,
I'm having hard time uploading image from filesystem where as drag and drop works.
I'm not getting a path of image selected from filesystem.
here is my code..
private String populateImage() throws Exception {
                    if (currentNode != null && currentNode.isNode()) {
                                   Node ImageNode = JcrResourceUtil.createPath(currentNode, "image",
                                                                      null, "nt:unstructured", true);
                                   imageUrl = ImageNode.hasProperty("fileReference") ? ImageNode.getProperty("fileReference").getValue().getString() : "";
       imageUrl = imageUrl.trim();
        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE IF IS: " + imageUrl);
                    } else {
                                        imageUrl = properties.get("fileReference", "");
                                        imageUrl = imageUrl.trim();
                                        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE ELSE IS: " + imageUrl);
                    return imageUrl;
So if I drag and drop..
ImageNode.hasProperty("fileReference") is returning a valid path
but if I upload an image it is returning Null.
So how to get the path? any suggestions around would be appreciated...

When you say path you mean you want the path to print out in your HTML? Is that accurate? If so you generally need to constructe that path based on the path to the current component. So if you component is located at /content/mysite/en/about/mypage/jcr:content/parsys/image then the path to the image would generally be something like /content/mysite/en/about/mypage/jcr:content/parsys/image.img.jpg/1283829292873.jpg. The .img. selector triggers the servlet associated with the foundation parbase - /libs/foundation/components/parbase/img.GET.java. The reason you reference it this way is that there is no filesystem path to the image - it is stored in the repository not on the file system, and it requires a servlet or script to ge the binary from the repository and steam it.
Normally the way you'd construct this is to use the out of the box Image class - so look at /libs/foundation/components/image/image.jsp. Now this example assumes that your component where you loaded the image extends /libs/foundation/components/parbase. If it doesn't then you either have to change your sling:superResourceType to /libs/foundation/components/parbase or some other component that does exten /libs/foundation/components/parbase.

What apps will work with the Apple Component Video cables ?????

I plan to order the Apple Component Video cables so I can watch the Netflix apps movies on my TV.
I know this app works with the cables but what else does?
The few apps I know of are:
Netflix
YouTube
included video app
but what else ?

Thanks. I did order it and it arrived yesterday. I have not done a lot but watched a couple things
with the Netflix app and I am very pleased.
The cable is only about 6 feet so I had to extend it but other than that I am pleased. Luckily, I already
had a 10' cable in the basement with connectors so now I can have my iPad where it usually is and
control things more easily.
A few more apps that work with it would be nice though. :>

Information about the ExternalConnection class inFramework.

There has been a lot of email asking about this class lately so here is
the latest on the status of the ExternalConnection class.
Currently the feature is in Beta. However it MAY be productized in 2F.
After a successful period of beta testing for the ExternalConnection
feature, we decided to widen the distribution of it. So we will provide
the example and documentation to any customer that asks for it.
You can get the documentation either from your Forte rep or Technical
Support. The example can also be emailed to you.
There is one outstanding bug in 2E, but it will only occur if you try
and write while reads are still outstanding on the same connection.
Hope this answers some questions.
kathy
Katherine A. Brown
Technical Support Team Manager
Forte Customer Services
=================================
(ph) 510.869.3439
(fax) 510.869.2010
(email) [email protected]
(hotline) 510.451.5400
=================================
From a Chinese fortune cookie: Customers are the precious things
Goods are only grass.
=================================

Hi Julien,
The main reason is portability. It's true that in many J2EE implementations it is possible to access an EJB's Home object without going through the component context (java:comp/env), but all such approaches are NOT portable. In the J2EE programming model, all resource access is made via the private component namespace. Using this level of indirection allows the bean developer to code the application without having to know which physical resource will be used at runtime. Each J2EE implementation can use a different scheme to identity physical resources, so by sticking to logical references in your code, you guarantee portability. Finally, you have the advantage that you can change which physical resource is mapped at deployment time without having to change your code.
So, the bottom line is, whenever you have any J2EE component (ejb, servlet, jsp, Application Client) that looks up an ejb, data source, queue, connection factory, etc., always use the environment reference type that J2EE defines for it and look it up via java:comp/env.
--ken
Kenneth Saks
J2EE SDK Team
SUN Microsystems

Is there any possible to change the shape of the gauge?

i want to change the shape of the gauge. for example,
i hope to chang it from rectangle to rotundity.
is there anyone konw about this?
thank you for your help .
onceaway

Hi,
Please check out the following link that discusses the customization of LabVIEW Controls and Indicators.
http://zone.ni.com/devzone/conceptd.nsf/webmain/A9FBCAA7A3D7922186256A3000652B56?opendocument#7
Also, I read through the above document and created a meter indicator with rounded edges(see attched image).
Regards,
Ankita A.
Applications Engineer
National Instruments
Attachments:
customized_meter_indicator_picture.bmp ‏577 KB

About the gauge component

Similar Messages

Maybe you are looking for