Accelerometer and HTTP Service

We are developing an iOS app that samples the accelerometer and sends the results to a local web service. In testing, it looks like the accelerometer sampling completely stops during the HTTP service call (HTTP Post) resulting in data dropouts. Is this expected behavior? Is there anything to make the sampling and the HTTP call concurrent? Would switching over to UDP using a native extension prevent the sampling dropouts?
iPhone OS: 5.0.1
Thanks

Thanks for the advice but I don't have both http servers running at the same time. I am shure I am connecting to JES at port 8080. To assure you of this I can tell that if jes is running I get "Not found" at port 8080 and when I shut it down I get connection refused. He is there but he doesn't like me!!!!
Not even HomePortal works... sigh...

Similar Messages

Http service vs data services

is there any difference between Http service and data services?

Hi
Data service is probably a server pushed communication like messaging.. It carries lots of changes as an object or arraycollection and as ubuntu said something like asyn service calls..
and http service is like traditional http service .. we can use http services to load remote resources also in flex application..

Webservice ,Http service using Actionscript

Hi,
I 'm trying to call webservice and http service from the
Action script....If any one has any example ...showing how to call
the webservice and also invoke the method and pass the request
object then please pass this to me.
From the Adobe tutorial I found only the webservice and how
to Load WSDL .But I'm looking for an example whih will show how to
use webservice and invoke a method (use operation) and pass the
argument (using request).

Hi Mona,
If by "SSL logon procedure", you mean client certificate authentication, there should not be user/password set in SICF.
But a mapping will be needed between the client certificate and an ABAP user.
Setting a user/password in SICF is as secured as an open door even if the door is armoured (SSL)....
As I said before, all of this depends from your specific security and confidentiality needed in your company for this PDF.
Regards,
Olivier

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

HTTP SERVICE STOPS FOR NO REASON AND NO ERRORS IN LOGS WIN2K

The HTTP service stops for no reason and we have to stop and restart to unlock and web server runs again. It appears to be related to number of concurrent users but we cannot tie it down to and specfics except on our NT 4.0 system the service never stops and runs fine . We are running versions R1 patch 4 and have gone up to 5 and 7 . We are running against an 9i database and using forms and reports. We are not using the forms server in patch 4 just the HTTP service. This is a big problem and would like an answer if possiable.

Please post your question in the appropriate product forum(s):
Database
http://forums.oracle.com/forums/index.jsp?cat=18
AppServer
http://forums.oracle.com/forums/index.jsp?cat=13
Forms
Forms
Reports
Reports

Difference between Direct binding , Web service Adapter and HTTP Binding

Can any one help what is the differnce between
*1) Direct binding*
*2) Webservice Adapter*
*3) HTTP Binding*
I am trying to use the above service adapters as references in BPEL.
I had invoked a web service hosted in OSB from BPEL via web service adapter and was successful
On going through few docs came through the other two service adapters but was not able to figure out what exactly is the differnce .
I learnt +"*Direct binding*"+ can be used to call OSB+ . How does it vary from Webservice Adapter+

hi Eric ,
Thanks for clarification ..
OSB does not generate WSDL and web service adapter in BPEL mandates WSDL .
I had to create WSDL separately and then feed into Web service adapter in BPEL to call OSB Proxy service. Though successful , felt its not an better approach.
Please advice is there any way thatWSDL is generated in OSB itself . .if i try to create webservice on Proxy service the wsdl resulted from it has only binding and porty type .
Is it the same case for ++Direct binding++ .I assume it should not be the case

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

Http service too busy error for SSIS adapters for SharePoint - SSIS 2005 and MOSS 2007

Hi,
a my old SSIS 2005 pkg that uses the SSIS adapters for SharePoint from only some days ago goes in error with this message for a data flow task that reads from a MOSS 2007 list:
Error: System.ServiceModel.ServerTooBusyException: The HTTP service located at
http://mysitename/_vti_bin/lists.asmx is too busy. ---> System.Net.WebException: The remote server returned an error: (503) Server Unavailable.    at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)    --- End of inner exception stack trace --- Server stack trace:     at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException
webException, HttpWebRequest request, HttpAbortReason abortReason)    at System.ServiceModel.Channels.HttpChannelFactory.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)    at System.ServiceModel.Channels.RequestChannel.Request(Message
message, TimeSpan timeout)    at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime
operation, Object[] ins, Object[] outs, TimeSpan timeout)    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage
message) Exception rethrown at [0]:     at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
msgData, Int32 type)    at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ListsService.ListsSoap.GetListAndView(GetListAndViewRequest request)    at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ListsService.ListsSoapClient.ListsService_ListsSoap_GetListAndView(GetListAndViewRequest
request)    at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ListsService.ListsSoapClient.GetListAndView(String listName, String viewName)    at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.Adapter.ListsAdapter.GetSharePointFields(String
listName, String viewId)    at Microsoft.Samples.SqlServer.SSIS.SharePointUtility.ListServiceUtility.GetFields(Uri sharepointUri, String listName, String viewName)    at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.GetAccessibleSharePointColumns(String
sharepointUrl, String listName, String viewName)    at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.ValidateSharePointColumns()    at Microsoft.Samples.SqlServer.SSIS.SharePointListAdapters.SharePointListSource.Validate()
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostValidate(IDTSManagedComponentWrapper90 wrapper).
Any suggests to me, in order to solve this issue? Many thanks

Unfortunately your post is off topic as it's not specific to SQL Server Samples and Community Projects.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to SQL Server Samples and Community Projects and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCPD, MCSD, MCSA, MCITP, MCDBA
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Issues deploying a cloud service with two endpoints (HTTP and HTTPS)

I ran into an issue this week in the azure portal when I tried to deploy a cloud service with two endpoints. (I am using the azure sdk 2.2). I deployed the cloud service to production with the following endpoints in the ServiceDefinition.csdef:
<WebRole name="NameChanged.Web" vmsize="Small">
<Sites>
<Site name="Web">
<Bindings>
<Binding name="HttpsIn" endpointName="HttpsIn" />
<Binding name="HttpIn" endpointName="HttpIn" />
</Bindings>
</Site>
</Sites>
<Endpoints>
<InputEndpoint name="HttpIn" protocol="http" port="80" />
<InputEndpoint name="HttpsIn" protocol="https" port="443" certificate="NameChangedCertificate" />
</Endpoints>
<Imports>
<Import moduleName="Diagnostics" />
</Imports>
<Certificates>
<Certificate name="NameChangedCertificate" storeLocation="LocalMachine" storeName="My" />
</Certificates>
</WebRole>
I followed the directions here (http://azure.microsoft.com/en-us/documentation/articles/cloud-services-configure-ssl-certificate/)
in Step 3 for deploying the cloud service to the azure portal. And HTTP worked just fine, but the HTTPS endpoint didn't work, we would get a 502 error whenever we tried to access the service via HTTPS.
We spent a lot of time to debug and see why HTTPS wasn't working, but everything we tried resulted in the same result: 502 error code when accessing the site
via HTTPS.
The only way that we were able to get HTTPS working for the cloud service in azure, was to completely delete our instance in the azure portal, and then do a two step deployment:
Step 1 - Remove the HTTP endpoint from our ServiceDefinition.csdef, like so:
<Site name="Web">
<Bindings>
<Binding name="HttpsIn"
</Bindings>
</Site>
</Sites>
<Endpoints>
<InputEndpoint name="HttpsIn" protocol="https" port="443" certificate="staging" />
</Endpoints>
</WebRole>
We then deployed the service to the azure portal. AND THE SERVICE WORKED WITH HTTPS!!!
Step 2 - We added the HTTP endpoint back into the ServiceDefinition.csdef, redeployed and both HTTP and HTTPS worked on the site.
I wanted to post this to help others that may have the same issue, and to see if anyone else has experienced this same thing? Is this an issue in the azure 2.2 SDK? This seems like a work around for getting both HTTP and HTTPS endpoints for a
cloud service, and it seems "wrong". Does anyone have a better way to do this?
Tim

Hi Tim;
This seems to be an very useful workaround thanks for sharing it. Hopefully this will come in handy for many of us.
Warm Regards
Prasant

What is difference between ESB Service and ESB Service Group

Guys please tell me What is difference between ESB System and ESB Service Group and when we use them, i mean in what condition.
Many Thanks
Deepak

The use of these is explained in the ESB developers guide along with some examples in what case to use them. See: http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28211/esb_jdev.htm#sthref167

Diff b/w Web service and window service

What is the difference between web service and window service, whether the both are same or not, Give some explain about that each one and give some examples also.

An XML Web service is a component that implements program
logic and provides functionality for diseparate
applications. These applications use standard protocols,
such as HTTP, XML, and SOAP, to access the functionality.
XML Web services use XML-based messaging to send and
receive data, which enables heterogeneous applications to
interoperate with each other. You can use XML Web services
to integrate applications that are written in different
programming languages and deployed on different platforms.
In addition, you can deploy XML Web services within an
intranet as well as on the Internet. While the Internet
brings users closer to organizations, XML Web services
allow organizations to integrate their applications.
A Windows service starts much before any user logs in to
the system (if it has been setup to start at boot up
process). A Windows service can also be setup in such a way
that it requires a user to start it manually ? the ultimate
customization!
Windows services run as background processes. These
applications do not have a user interface, which makes them
ideal for tasks that do not require any user interaction.
You can install a Windows service on any server or computer
that is running Windows 2000, Windows XP, or Windows NT.
You can also specify a Windows service to run in the
security context of a specific user account that is
different from the logged on user account or the default
computer account. For example, you can create a Windows
service to monitor performance counter data and react to
threshold values in a database.

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

Https front end and http backend

Hi there....I am having a small issue....I have a web app that is https based....I have installed the cert on the CSS, and DNS for this app points to the VIP....the client is wanting to have an https front end, and then load balance in http to the backend servers....the issue I am running into is that this only works if I have an active port 80 rule on that same VIP....if I suspend the port 80 rule and only leave the port 443 rule active on that VIP, it doesn't work....please see appropriate config portions below....Thanks in advance!
Sandeep
ANy suggestions? I have been trying this for a couple of days now...it works fine if the backend sessions are also https, but the client has changed their requirement....
ssl-proxy-list SSL1
ssl-server 1
ssl-server 1 rsakey app1-test
ssl-server 1 rsacert app1-test
ssl-server 1 vip address 10.19.55.10
ssl-server 1 cipher rsa-with-rc4-128-md5 10.19.55.10 81
backend-server 1
backend-server 1 port 81
backend-server 1 server-ip 10.19.55.132
backend-server 1 ip address 10.19.55.132
backend-server 2
backend-server 2 port 81
backend-server 2 server-ip 10.19.55.133
backend-server 2 ip address 10.19.55.133
backend-server 3
backend-server 3 port 83
backend-server 3 server-ip 10.19.55.132
backend-server 3 ip address 10.19.55.132
backend-server 4
backend-server 4 port 83
backend-server 4 server-ip 10.19.55.133
backend-server 4 ip address 10.19.55.133
backend-server 5
backend-server 5 port 85
backend-server 5 server-ip 10.19.55.132
backend-server 5 ip address 10.19.55.132
backend-server 6
backend-server 6 port 85
backend-server 6 server-ip 10.19.55.133
backend-server 6 ip address 10.19.55.133
active
service webserver002:81
ip address 10.19.55.132
port 81
keepalive port 2199
keepalive type tcp
protocol tcp
active
service webserver003:81
ip address 10.19.55.133
port 81
keepalive port 2199
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service webserver002:83
ip address 10.19.55.132
port 83
add ssl-proxy-list SSL1
keepalive port 2399
keepalive type tcp
protocol tcp
active
service webserver003:83
ip address 10.19.55.133
port 83
keepalive port 2399
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service webserver002:85
ip address 10.19.55.132
port 85
add ssl-proxy-list SSL1
keepalive port 2599
keepalive type tcp
protocol tcp
active
service webserver003:85
ip address 10.19.55.133
port 85
keepalive port 2599
keepalive type tcp
protocol tcp
add ssl-proxy-list SSL1
active
service SSL_Front
slot 2
type ssl-accel
keepalive type none
add ssl-proxy-list SSL1
active
owner app1-test
content app-test_back
vip address 10.19.55.10
add service webserver002:81
add service webserver003:81
add service webserver002:83
add service webserver003:83
add service webserver002:85
add service webserver003:85
balance aca
protocol tcp
port 81
active
content app1-test_front
vip address 10.19.55.10
application ssl
add service SSL_Front
protocol tcp
port 443
advanced-balance ssl
balance aca
active

Thanks for the quick reply....there is another port 80 rule setup for that vip....I was using that to test with the app until I got the front end https rules working....
my port 80 rules just says listen to 10.19.55.10 on port 80 and load balance btwn the webervers on port 8x in the back end...
I am trying to do https front end and http backend....
no where in my SSL config have I configured port 80....but when I suspend that rule it all fails....
I am wondering if the backend server sessions are happening properly?
I don't fully get what you mean by "You need to have the rule in port 443 to match traffic coming from the client and the clear text rule (port 81) to match traffic already decrypted coming from the SSL module"
Haven'tI done that?
Thanks again!
Sandeep

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone?

I have an iphone 2g unlocked for tmobile. For the past 2 years it has worked fine then out of no where I get this message "your selected cellular network is no longer available" and the service cuts in and out all day. It can't find tmobile on my phone for some reason but for 2 years previous it could no problem? tmobile says it is a problem with my phone and not their service.
Any ideas what to do?

I would just explain that this just started happening, that nothing has changed on the phone, that it is an original iPhone and I wondered if they are implementing a change in coverage with their Edge network in my area.
If you restore your phone, you will be given an option to back up your phone at the beginning of the process (see step 6 here: http://support.apple.com/kb/HT1414). You will be given the option to restore to that backup at the end of the restore process. Your messages are stored in the backup so restoring to the backup will return the messages to your phone. Be sure to import your photos and videos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts somewhere before restoring your phone as these sometimesget lost in the restore process.

WSIF Binding Error while invoking HTTP Service

Hi,
I am getting a WSIF binding error when invoking an HTTP service. I was able to successfully invoke another HTTP service on the same server. However, while invoking some of the others services, we are getting errors. The wsdl binding declaration is:
<binding name="JACADACustMaintBinding" type="tns:JACADACustMaintPortType">
<http:binding verb="POST"/>
<operation name="PostData">
<http:operation location="/custmaint.cfg"/>
<input>
<mime:mimeXml part="CustMaintInput"/>
<mime:content type="text/xml"/>
</input>
<output>
<mime:mimeXml part="CustMaintOutput"/>
<mime:content type="text/xml"/>
</output>
</operation>
</binding>
The error we are getting is as follows:
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=[email protected] : Could not invoke 'PostData'; nested exception is:
     java.lang.Exception: Error in HTTP Post: Status 500: Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0: <html><head><title>Apache Tomcat/4.1.18 - Error report</title><STYLE></STYLE> </head><body><h1>HTTP Status 500 - Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0</h1><HR size="1" noshade><p><b>type</b> Status report</p><p><b>message</b> <u>Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0</u></p><p><b>description</b> <u>The server encountered an internal error (Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0) that prevented it from fulfilling this request.</u></p><HR size="1" noshade><h3>Apache Tomcat/4.1.18</h3></body></html>
,detail=java.lang.Exception: Error in HTTP Post: Status 500: Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0: <html><head><title>Apache Tomcat/4.1.18 - Error report</title><STYLE></STYLE> </head><body><h1>HTTP Status 500 - Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0</h1><HR size="1" noshade><p><b>type</b> Status report</p><p><b>message</b> <u>Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0</u></p><p><b>description</b> <u>The server encountered an internal error (Unable to invoke service method: com.jacada.ea.jclient3.JClient3Exception: com.jacada.ea.jclient3.JClient3Exception:Negative response from server, response code: 110. Message from server: com.jacada.ea.jservice.JServiceException: Could not set input parameter: InVar_0) that prevented it from fulfilling this request.</u></p><HR size="1" noshade><h3>Apache Tomcat/4.1.18</h3></body></html>
     at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:617)
     at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:437)
     at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:251)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:826)
     at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:402)
     at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:199)
     at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3698)
     at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1655)
     at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:217)
     at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:314)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5765)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1087)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.createAndInvoke(CubeEngineBean.java:133)
     at com.collaxa.cube.engine.ejb.impl.CubeEngineBean.syncCreateAndInvoke(CubeEngineBean.java:162)
     at sun.reflect.GeneratedMethodAccessor86.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiresNewInterceptor.invoke(TxRequiresNewInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at CubeEngineBean_LocalProxy_4bin6i8.syncCreateAndInvoke(Unknown Source)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequestAnyType(DeliveryHandler.java:547)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.initialRequest(DeliveryHandler.java:464)
     at com.collaxa.cube.engine.delivery.DeliveryHandler.request(DeliveryHandler.java:133)
     at com.collaxa.cube.ejb.impl.DeliveryBean.request(DeliveryBean.java:95)
     at sun.reflect.GeneratedMethodAccessor85.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
     at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
     at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at DeliveryBean_RemoteProxy_4bin6i8.request(Unknown Source)
     at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processNormalOperation(SOAPRequestProvider.java:451)
     at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processBPELMessage(SOAPRequestProvider.java:274)
     at com.collaxa.cube.ws.soap.oc4j.SOAPRequestProvider.processMessage(SOAPRequestProvider.java:120)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:194)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Request you all to provide inputs.
Thanks and Regards.
John

Hi,
Using the exact same wsdl i was able to get a response from the HTTP service using OSB. I created a business service targeting this wsdl. Then created a proxy service to route the xml to the business service.
I was able to successfully invoke and get response from the HTTP service without making any change to the wsdl.
Could this be a bug in BPEL PM? Should I raise an SR?

Accelerometer and HTTP Service

Similar Messages

Maybe you are looking for