Access "controls" or buttons on a LabVIEW VI with DLL

Hello Experts,
I have a LabVIEW GUI executable file and need to access "control" or buttons on it via another programming lanuguage (Visual Basic .NET) say if the user presses a "EXIT" button on the VB.NET GUI, it goes and clicks the "EXIT" button on the LabVIEW GUI. Is this possible to do using LabVIEW built DLL's ? If not, could you please guide me to the right apprach ?
Thank you very much for your time !

Yes, the front panel comes up after my calling but I am not able to access any "controls" or buttons on it. However, if now (after calling) I manually click on this front panel, it works but I want my VB.NET code to be able to do that.
Our vendor owns the source code and they only provide the executable file to be able to communicate to their mechanical system. We, as a OEM, integrate their mechanical system into our system and provide our end customers with the VB code that controls the entire system.

Similar Messages

How to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe

Hello, everyone. Using VC++, I have gotten the handle of a *.exe(built by Labview), but I cannot get the button handle. I want to get the button handle and post the message to control the button. How can I do that? When I use the SPY++, the *.exe(built by Labview) have not any child windows which is very different from the *.exe(built by VC++). In SPY++, what is the LVDChild class? How can I send the message to control the button on *.exe(built by Labview)???
That is to send a command from a vc++.exe to LABVIEW.exe in order to control the button on the LABVIEW.exe. How can I get it ?
Thank you!

hummingbird wrote:
Thank you! But I dont kown how to use vi server to raise a value signalling event. Can we put vi server into the vc program? Can you give me some more information or some examples, hehe!
hummingbird
Checkout the LabVIEW ActiveX server interface in the User Manual in Chapter 20, Windows Connectivity and the VI Server Reference in Chapter 17, Programmatically Controlling VIs.
There is a sample for Visual Basic under examples/comm/VBtoLV.frm, which should be quite simple to translate to Visual C as long as you can figure out the basics of ActiveX programming in VC (I have never done anything with ActiveX in VC). For those basics I would recommend some text book or MSDN.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

LabView interface with DLL that uses ActiveX

I've written a DLL using Microsoft Visual Studio 2005. This DLL uses ActiveX (MSXML4.0). It works fine being called from other applications created in Microsoft Visual Studio. It crashes being called from LabView 7.1. By commenting out everything, I've figured out that it crashes on the call to ActiveX (no problems if this call is commented out). What should I do to make it work?
I've tried using CoInitialize at the initialization of DLL; it didn't solve the problem.
Additional information: DLL is using MFC in a Static Library, not using ATL, Character set = Not Set.
The functions are defined in C calling convention (not __stdcall).
Please help.
Thank you.
Irina Kaliniouk

Thank you for your answer, but that is not the case. There is no UI in this DLL, but it is using some convinenient MFC classes, like threads, CString, etc. The threading really was not even involved in the example that crashed. The function that crashed was
selectNodes on MSXML2::IXMLDOMNodePtr. Here is the code:
MSXML2::IXMLDOMNodeListPtr selectNodes (LPCTSTR expression, MSXML2::IXMLDOMNodePtr pStartNode)
CComBSTR quesryBstr (expression);
return pStartNode->selectNodes (quesryBstr.m_str); //_bstr_t(expression));
where the pStartNode was a root node of
MSXML2::IXMLDOMDocument2Ptr m_pXMLDoc;
hr = m_pXMLDoc.CreateInstance ("Msxml2.DOMDocument.4.0", NULL, CLSCTX_INPROC_SERVER);
I commented out really everything except this function, so there was nothing to corrupt the memory or any other problems.
What can be of a problem?
Thanks.

GRC Access Control licensing and Sizing

Dear All,
I am putting up a proposal for GRC Access Control. Could someone please help me with the calculation of licensing cost and the hardware requirements?
1. Is the license cost totally driven by revenue ?
2. Is there a flat base price plus number of user accounts?
3. What sort of hardware config is required?
Thanks,
Aj

Please ask your SAP account contact for pricing information.
Frank.

Reg : Access control installationn

HI all,
My system has kernel 6.40 SP19 . i am trying to installing grc access control 5.3 .Can we go ahead with installtion Is there any difference between netweaver 2004 and netweaver 2004s.but i access control has a prerequisite of having netweaver 2004s sp12.So can we go ahead with installtion .
Edited by: Ambarish annapureddy on Nov 19, 2008 4:22 PM

Hi Ambarish,
For AC5.3 a SAP NW AS 7.0 SP12 or higher is required as by advised by SAP.
Pls go through the following presentation from SAP GRC RIG team on SAP GRC Access Control 5.3 Pre-installation requirements
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a07b4cc8-1a57-2b10-1798-d2fec068473a
Hope this helps.
Regards,
Kiran Kandepalli.

OSB - ALSB / WLST / Security / add entry with WLST in Access Control

Hello,
I try to reproduce with WLST script the input from the consol to declare user on Access Control proxy (security).
sbconsol->$Proxy Service->Security->General Confiruration->Access Control->Transport Access Control->Add Conditions
* First implementation without success with the com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean : accessControlSecurity1()
* Second try with the service definition of the proxy service but cannot parse with Xpath accessControl Security2()
any idee ???
test case :
prerequisit
create an ALSB domain 10.3 (admin one with username='weblogic' password='weblogic' url='t3://localhost:7001') and create a proxy service on the default project
conf/setEnv.cmd
@CLS
@echo ON
@set BEA_HOME=D:\PRODUCT\MIDDLEWARE\SOA\OSB_10.3
@set WL_HOME=%BEA_HOME%\wlserver_10.3
@set OSB_HOME=%BEA_HOME%\osb_10.3
@set SCRIPTING_HOME=E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security
@set OSB_LIB=%OSB_HOME%/lib/sb-kernel-api.jar;%BEA_HOME%/modules/com.bea.alsb.statistics_1.0.1.0.jar;%OSB_HOME%/lib/sb-kernel-resources.jar;%OSB_HOME%/lib/sb-kernel-common.jar;%OSB_HOME%/lib/sb-kernel-impl.jar;%OSB_HOME%\lib\sb-security.jar;%OSB_HOME%/modules/com.bea.common.configfwk_1.3.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.1.0.jar;%OSB_HOME%/lib/modules/com.bea.alsb.resources.archive.jar;
@set TOOL_LIB=%SCRIPTING_HOME%\lib\log4j-1.2.15.jar;%SCRIPTING_HOME%\lib\jsch-0.1.43.jar;%SCRIPTING_HOME%\lib\db2jcc.jar
@set CLASSPATH=%OSB_LIB%;%TOOL_LIB%;%CLASSPATH%
@set CLASSPATH=%SCRIPTING_HOME%\lib\db2jcc.jar;%TOOL_LIB%;%CLASSPATH%
@set MODULE_LIB=%SCRIPTING_HOME%\lib
@call %WL_HOME%\server\bin\setWLSEnv.cmd > nul 2<&1
launch.cmd
@CLS
@echo OFF
@SETLOCAL
@call "conf\setEnv.cmd" > nul 2<&1
set PWD=%~dp0
%JAVA_HOME%\bin\java -Dmodule.lib=%MODULE_LIB% weblogic.WLST -skipWLSModuleScanning lib/security.py
lib/security.py
from com.bea.wli.monitoring import StatisticType
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.util import Collections
from java.io import FileInputStream
from java.io import FileOutputStream
from java.lang import String
from java.lang import Boolean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config.env import EnvValueQuery;
from com.bea.wli.config import Ref
from com.bea.wli.config.customization import Customization
from com.bea.wli.config.customization import EnvValueCustomization
from com.bea.wli.config.customization import FindAndReplaceCustomization
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.query import BusinessServiceQuery
from com.bea.wli.sb.management.query import ProxyServiceQuery
from com.bea.wli.sb.management.configuration import ServiceConfigurationMBean
import os
# before, create an ALSB domain 10.3 with a proxy service in the default project and add an Acces Control Policy in the consol
# sbconsol->Project Explorer->default->${proxy service}->Security->Access Control->Create Session->Add Conditions->User->USR_1->Add
# when we try to modify the Acces Control Policy of the proxy service with the ServiceSecurityConfigurationMBean
def accessControlSecurity1( domain_name ):
          # connection
          print "\n\n\n***********************************************************************************************"
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get the ServiceSecurityConfigurationMBean
          serviceSecurityConfigurationMBean = findService(String("ServiceSecurityConfiguration.").concat(sessionName), "com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean")
          # get the XACMLAuthorizer
          working_directory=pwd()
          serverConfig()
          xacmlAuthorizer = cd('/SecurityConfiguration/%s/Realms/myrealm/Authorizers/XACMLAuthorizer' % domain_name )
          cd(working_directory)
          domainRuntime()
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               # use the security Mbean to add : USER_A,USER_B,USER_C to the policy
               policyHolder = serviceSecurityConfigurationMBean.newAccessControlPolicyHolderInstance(xacmlAuthorizer)
               policyHolder.setPolicyExpression("Usr(USER_A,USER_B,USER_C)")
               policyScope = serviceSecurityConfigurationMBean.newDefaultMessagePolicyScope(ref)
               serviceSecurityConfigurationMBean.setAccessControlPolicy(policyScope,policyHolder)
               # print the service definition
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               print serviceDefinition
               # we can see the security entry in the service definition has follow
               # <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
               # <ser:coreEntry isProxy="true" isEnabled="true" isAutoPublish="false">
               # <ser:description/>
               # <ser:security>
               # <con:access-control-policies xmlns:con="http://www.bea.com/wli/sb/services/security/config">
               # <con:message-level-policies>
               # <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config">
               # <con:policy provider-id="XACMLAuthorizer">
               # <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
               # </con:policy>
               # </con1:default-policy>
               # </con:message-level-policies>
               # </con:access-control-policies>
               # </ser:security>
          # but when we commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          # we got the following exception
          # Unexpected error: com.bea.wli.config.session.SessionConflictException
          # No stack trace available.
          # Problem invoking WLST - Traceback (innermost last):
          # File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 246, in ?
          # File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 105, in accessControlSecurity1
          # com.bea.wli.config.session.SessionConflictException: Conflicts for session SessionScript1363339726764
          # [Non-Critical] Concurrent Modification Conflicts
          # NONE
          # [Critical] Resources with validation errors
          # 1 - ProxyService test/PS_TEST_bis CannotCommit
          # + CannotCommit [OSB Security:386836]Unnecessary proxy wide message access control policy found for service "test/PS_TEST_bis". Hint: The service is neither an active security
          # intermediary nor has custom authentication enabled. ServiceDiagnosticLocation[SECURITY_TAB]:DiagnosticLocation:<con:message-level-policies xmlns:ser="http://www.bea.com/wli/sb/services" xml
          # ns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:con="http://www.bea.com/wli/sb/services/security/config">
          # <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/
          # config">
          # <con:policy provider-id="XACMLAuthorizer">
          # <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
          # </con:policy>
          # </con1:default-policy>
          # </con:message-level-policies>
          # [Info] Informational messages
          # NONE
          # at com.bea.wli.config.session.SessionManager.commitSessionUnlocked(SessionManager.java:358)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:339)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:297)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:306)
          disconnect()
# when we try to modify the Acces Control Policy of the proxy service whith the service XML definition
def accessControlSecurity2( domain_name ):
          # connection
          print "\n\n\n***********************************************************************************************"
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               # parsing the proxy definition
               nsSer = "declare namespace ser='http://www.bea.com/wli/sb/services'"
               nsXsi = "declare namespace xsi='http://www.w3.org/2001/XMLSchema-instance'"
               nsTran = "declare namespace tran='http://www.bea.com/wli/sb/transports'"
               nsEnv = "declare namespace env='http://www.bea.com/wli/config/env'"
               nsCon = "declare namespace con='http://www.bea.com/wli/sb/services/security/config'"
               nsCon1 = "declare namespace con1='http://www.bea.com/wli/sb/services/security/config'"
               # when we try to parse the following Xpath Expression, it' working but not sufficent to access the <con:policy-expression> element
               confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy"
               confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
               print "WORKING{%s}" % confElem
               # get the result
               # <xml-fragment xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config" xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
               # <con:policy provider-id="XACMLAuthorizer">
               # <con:policy-expression>Usr(USER_1,USER_2,USER_3)</con:policy-expression>
               # </con:policy>
               # </xml-fragment>
               # and when we try to acces the <con:policy> element whith the following Xpath expression we got an empty result
               confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy/con:policy"
               confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
               print "DON'T WORKING{%s}" % confElem
               # get empty result
               # array([], org.apache.xmlbeans.XmlObject)
          # want to modify the value like this on the <con:policy-expression> but cannot reach it ...
          #confValue="Usr(USER_A,USER_B,USER_C)"
          #confElem.setStringValue(confValue)
          # commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          disconnect
# print the service definition
def printServiceDefinition( domain_name ):
          # connection
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               print serviceDefinition
          # commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          disconnect
#accessControlSecurity1('cluster_domain')
accessControlSecurity2('cluster_domain')

Hello,
I try to reproduce with WLST script the input from the consol to declare user on Access Control proxy (security).
sbconsol->$Proxy Service->Security->General Confiruration->Access Control->Transport Access Control->Add Conditions
* First implementation without success with the com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean : accessControlSecurity1()
* Second try with the service definition of the proxy service but cannot parse with Xpath accessControl Security2()
any idee ???
test case :
prerequisit
create an ALSB domain 10.3 (admin one with username='weblogic' password='weblogic' url='t3://localhost:7001') and create a proxy service on the default project
conf/setEnv.cmd
@CLS
@echo ON
@set BEA_HOME=D:\PRODUCT\MIDDLEWARE\SOA\OSB_10.3
@set WL_HOME=%BEA_HOME%\wlserver_10.3
@set OSB_HOME=%BEA_HOME%\osb_10.3
@set SCRIPTING_HOME=E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security
@set OSB_LIB=%OSB_HOME%/lib/sb-kernel-api.jar;%BEA_HOME%/modules/com.bea.alsb.statistics_1.0.1.0.jar;%OSB_HOME%/lib/sb-kernel-resources.jar;%OSB_HOME%/lib/sb-kernel-common.jar;%OSB_HOME%/lib/sb-kernel-impl.jar;%OSB_HOME%\lib\sb-security.jar;%OSB_HOME%/modules/com.bea.common.configfwk_1.3.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.0.0.jar;%BEA_HOME%/modules/com.bea.common.configfwk_1.2.1.0.jar;%OSB_HOME%/lib/modules/com.bea.alsb.resources.archive.jar;
@set TOOL_LIB=%SCRIPTING_HOME%\lib\log4j-1.2.15.jar;%SCRIPTING_HOME%\lib\jsch-0.1.43.jar;%SCRIPTING_HOME%\lib\db2jcc.jar
@set CLASSPATH=%OSB_LIB%;%TOOL_LIB%;%CLASSPATH%
@set CLASSPATH=%SCRIPTING_HOME%\lib\db2jcc.jar;%TOOL_LIB%;%CLASSPATH%
@set MODULE_LIB=%SCRIPTING_HOME%\lib
@call %WL_HOME%\server\bin\setWLSEnv.cmd > nul 2<&1
launch.cmd
@CLS
@echo OFF
@SETLOCAL
@call "conf\setEnv.cmd" > nul 2<&1
set PWD=%~dp0
%JAVA_HOME%\bin\java -Dmodule.lib=%MODULE_LIB% weblogic.WLST -skipWLSModuleScanning lib/security.py
lib/security.py
from com.bea.wli.monitoring import StatisticType
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.util import Collections
from java.io import FileInputStream
from java.io import FileOutputStream
from java.lang import String
from java.lang import Boolean
from com.bea.wli.sb.util import EnvValueTypes
from com.bea.wli.config.env import EnvValueQuery;
from com.bea.wli.config import Ref
from com.bea.wli.config.customization import Customization
from com.bea.wli.config.customization import EnvValueCustomization
from com.bea.wli.config.customization import FindAndReplaceCustomization
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
from com.bea.wli.sb.management.query import BusinessServiceQuery
from com.bea.wli.sb.management.query import ProxyServiceQuery
from com.bea.wli.sb.management.configuration import ServiceConfigurationMBean
import os
# before, create an ALSB domain 10.3 with a proxy service in the default project and add an Acces Control Policy in the consol
# sbconsol->Project Explorer->default->${proxy service}->Security->Access Control->Create Session->Add Conditions->User->USR_1->Add
# when we try to modify the Acces Control Policy of the proxy service with the ServiceSecurityConfigurationMBean
def accessControlSecurity1( domain_name ):
          # connection
          print "\n\n\n***********************************************************************************************"
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get the ServiceSecurityConfigurationMBean
          serviceSecurityConfigurationMBean = findService(String("ServiceSecurityConfiguration.").concat(sessionName), "com.bea.wli.sb.security.management.configuration.ServiceSecurityConfigurationMBean")
          # get the XACMLAuthorizer
          working_directory=pwd()
          serverConfig()
          xacmlAuthorizer = cd('/SecurityConfiguration/%s/Realms/myrealm/Authorizers/XACMLAuthorizer' % domain_name )
          cd(working_directory)
          domainRuntime()
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               # use the security Mbean to add : USER_A,USER_B,USER_C to the policy
               policyHolder = serviceSecurityConfigurationMBean.newAccessControlPolicyHolderInstance(xacmlAuthorizer)
               policyHolder.setPolicyExpression("Usr(USER_A,USER_B,USER_C)")
               policyScope = serviceSecurityConfigurationMBean.newDefaultMessagePolicyScope(ref)
               serviceSecurityConfigurationMBean.setAccessControlPolicy(policyScope,policyHolder)
               # print the service definition
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               print serviceDefinition
               # we can see the security entry in the service definition has follow
               # <xml-fragment xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
               # <ser:coreEntry isProxy="true" isEnabled="true" isAutoPublish="false">
               # <ser:description/>
               # <ser:security>
               # <con:access-control-policies xmlns:con="http://www.bea.com/wli/sb/services/security/config">
               # <con:message-level-policies>
               # <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config">
               # <con:policy provider-id="XACMLAuthorizer">
               # <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
               # </con:policy>
               # </con1:default-policy>
               # </con:message-level-policies>
               # </con:access-control-policies>
               # </ser:security>
          # but when we commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          # we got the following exception
          # Unexpected error: com.bea.wli.config.session.SessionConflictException
          # No stack trace available.
          # Problem invoking WLST - Traceback (innermost last):
          # File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 246, in ?
          # File "E:\PROJETS\RECURANT\EDF\linky\WLST\WORKING\Security\lib\security.py", line 105, in accessControlSecurity1
          # com.bea.wli.config.session.SessionConflictException: Conflicts for session SessionScript1363339726764
          # [Non-Critical] Concurrent Modification Conflicts
          # NONE
          # [Critical] Resources with validation errors
          # 1 - ProxyService test/PS_TEST_bis CannotCommit
          # + CannotCommit [OSB Security:386836]Unnecessary proxy wide message access control policy found for service "test/PS_TEST_bis". Hint: The service is neither an active security
          # intermediary nor has custom authentication enabled. ServiceDiagnosticLocation[SECURITY_TAB]:DiagnosticLocation:<con:message-level-policies xmlns:ser="http://www.bea.com/wli/sb/services" xml
          # ns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env" xmlns:con="http://www.bea.com/wli/sb/services/security/config">
          # <con1:default-policy xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/
          # config">
          # <con:policy provider-id="XACMLAuthorizer">
          # <con:policy-expression>Usr(USER_A,USER_B,USER_C)</con:policy-expression>
          # </con:policy>
          # </con1:default-policy>
          # </con:message-level-policies>
          # [Info] Informational messages
          # NONE
          # at com.bea.wli.config.session.SessionManager.commitSessionUnlocked(SessionManager.java:358)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:339)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:297)
          # at com.bea.wli.config.session.SessionManager.commitSession(SessionManager.java:306)
          disconnect()
# when we try to modify the Acces Control Policy of the proxy service whith the service XML definition
def accessControlSecurity2( domain_name ):
          # connection
          print "\n\n\n***********************************************************************************************"
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               # parsing the proxy definition
               nsSer = "declare namespace ser='http://www.bea.com/wli/sb/services'"
               nsXsi = "declare namespace xsi='http://www.w3.org/2001/XMLSchema-instance'"
               nsTran = "declare namespace tran='http://www.bea.com/wli/sb/transports'"
               nsEnv = "declare namespace env='http://www.bea.com/wli/config/env'"
               nsCon = "declare namespace con='http://www.bea.com/wli/sb/services/security/config'"
               nsCon1 = "declare namespace con1='http://www.bea.com/wli/sb/services/security/config'"
               # when we try to parse the following Xpath Expression, it' working but not sufficent to access the <con:policy-expression> element
               confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy"
               confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
               print "WORKING{%s}" % confElem
               # get the result
               # <xml-fragment xsi:type="con:ProviderPolicyContainerType" xmlns:con="http://www.bea.com/wli/sb/security/accesscontrol/config" xmlns:con1="http://www.bea.com/wli/sb/services/security/config" xmlns:ser="http://www.bea.com/wli/sb/services" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tran="http://www.bea.com/wli/sb/transports" xmlns:env="http://www.bea.com/wli/config/env">
               # <con:policy provider-id="XACMLAuthorizer">
               # <con:policy-expression>Usr(USER_1,USER_2,USER_3)</con:policy-expression>
               # </con:policy>
               # </xml-fragment>
               # and when we try to acces the <con:policy> element whith the following Xpath expression we got an empty result
               confPath = "ser:coreEntry/ser:security/con:access-control-policies/con1:transport-level-policy/con:policy"
               confElem = serviceDefinition.selectPath(nsSer + nsXsi + nsTran + nsEnv + nsCon + nsCon1 + confPath )
               print "DON'T WORKING{%s}" % confElem
               # get empty result
               # array([], org.apache.xmlbeans.XmlObject)
          # want to modify the value like this on the <con:policy-expression> but cannot reach it ...
          #confValue="Usr(USER_A,USER_B,USER_C)"
          #confElem.setStringValue(confValue)
          # commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          disconnect
# print the service definition
def printServiceDefinition( domain_name ):
          # connection
          connect( 'weblogic', 'weblogic', 't3://localhost:7001')
          domainRuntime()
          # create a session
          sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
          SessionMBean = findService( SessionManagementMBean.NAME ,SessionManagementMBean.TYPE)
          SessionMBean.createSession(sessionName)
          # get service ref
          ConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
          bsQuery = ProxyServiceQuery()
          bsQuery.setPath("default/*")
          refs = ConfigurationMBean.getRefs(bsQuery)
          for ref in refs:
               print 'ref=%s'%ref
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               servConfMBean = findService( "%s.%s" % (ServiceConfigurationMBean.NAME, sessionName), ServiceConfigurationMBean.TYPE)
               serviceDefinition = servConfMBean.getServiceDefinition(ref)
               print serviceDefinition
          # commit
          SessionMBean.activateSession(sessionName, "description for session activation")
          disconnect
#accessControlSecurity1('cluster_domain')
accessControlSecurity2('cluster_domain')

HT3477 Why would a Guest network need an Access Control List?

I have an Airport Extreme running software 7.6.4 and I have figured out today, to my dismay, that because I have an Access Control List active on my main network (with MAC addresses of my devices), the Guest Network feature, as implemented, becomes simply useless.
Essentially any friend coming at my place, to whom I want to share my internet connection for a while (say, a couple of hours) with an easy password, either provides me with the MAC address of his device, or has no access at all. And if he has to give me the MAC, then I could just simply add him to the main network in the first place and, BTW, I need to give him also the (complicated) password of my main network.
What is the purpose of a Guest Network then, if it is subject to the same access restrictions of the main one? I need to remove the access list on my main one, to offer quick and easy access to friends and family defeating the purpose of protecting my main network with MAC addresses and a separate guest network?
I don't get it. This is a bug. It has to be. I see no logic in it, in the way it is implemented. Or it should have 2 separate access lists, for flexibility. But a *Guest* network, should be by definition open, or easy access (with password, sure, if necessary) - and in case it should have restricted access, it should be by time maybe, not by MAC address....!

Why would a Guest Network need an Access Control List
The short answer would be that it would not need an Access Control listing......if you used the default settings in Timed Access.
Sorry, but I do not understand how you have constructed your Timed Access control list.
Normally, you would use the default settings and leave the "main" (and "guest") networks set for Unlimited Access.....and then only list the devices that you want to limit separately, establishing "rules" and timeframes for each device that you want to control.
When you do it the default way, a user would be able to connect to the Guest Network at any time, provided that he/she had the password for the guest network. No MAC Address needed at all.
If you wanted to limit the time that the "guest" could connect to the guest network, you would have to set up a "rule" for the guest. I would not normally think of limiting the time that a guest could connect.....(unless the guest were one of the grandkids).
It sounds to me as if you might have set the default network setting to No Access, and you have then set up each device with the times that they would be allowed to connect.
If you did it this way, then the default No Access would also apply to the Guest Network....and any guest would have to then be set up by MAC Address with a rule set for the times that they were allowed to connect.
Personally, I have changed the default rule for the "main" (and guest) networks from Unlimited Access to Everyday between 7:00 AM and 11:30 PM. So no one on either the main or guest network can connect before 7:00 AM or after 11:30 PM.
Then, there are a few rules that I have for devices that connect to the guest network to further limit them to certain times each day. You could do this as well for devices that you want to control on the "main" network.

Embedding MS Accessibility controls into pdf document.

I have a pdf form running fine in a server with Adobe Proffesional 8.0, We need to update to Adobe Pro 9.0 or Adobe Pro 10. The app is not performing well in those higer versions of Adobe Pro because we need to capture data from a pop up window to name an output file, but the data can no be scraped from the pop up window. I heard that the problem can be circumvented by embedding MS Accessibility Controls into the form. Can sombody please help me understand what is "embedding MS Accessibility Controls into a pdf form"?
Thanks

We have the pdf rendered in a JVM in an Intranet. The pdf is displayed using Adobe Prod 8.0, when all the required data is captured from a phone interview, a button (click) triggers a WebService to execute and send a file to a Lenux Server.

How do I call a LabView VI via dll to display its control panel in a tab of my uir in LabWindows

Hi User Community,
I am trying to build a LabWindows Top Level Control Panel to call individual LabView VI's, which have been compiled into a dll.
I have no problem using the CmtScheduleThreadPoolFunction to start a new thread that calls these VI's however, I'm having trouble trying to get the display that comes up in it's own window to display in a tab of my existing UIR.
I've compiled the DLLs to always display the VI Control Panel window when running - and usually it covers the whole screen you can't see the LabWindows window until the VI completes.
Is there a definitive guide to LabWindows Windows/Panels/Tabs? Or does anyone have experience with this? Any help would be appreciated.

Hello,
I would suggest reviewing the Programming with Panels and Programming with Tabs CVI Help documents. I think that this can be done with the LoadPanelEx function. Let me know how it goes!
As well, I found some example code to get you started.
How to access individual controls within multiple tabs in CVI
http://decibel.ni.com/content/docs/DOC-14187
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

Unable to use the Assign Access Control feature in shared services

Hi,
When I try to right click on the essbase applicaiton in Shared Services to assign access control( to assign a new filter) I keep getting the following error
" Internet cannot display the webpage" message with the following
This problem can be caused by a variety of issues, including:
Internet connectivity has been lost.
The website is temporarily unavailable.
The Domain Name Server (DNS) is not reachable.
The Domain Name Server (DNS) does not have a listing for the website's domain.
There might be a typing error in the address.
If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section
All the services are running file and I can create new users/ groups and also perform appication migration.
I'm using Hyperion 11.1.3.24 on windows 2003 r2.
Any help is appreciated. Thanks.
Regards

vs wrote:
John,
I tried the refresh button and nothing appears. I have created a group and gave it filter access. Now I'm trying to attach that filter to the group.
Appreciate your help.Can we replace backup .sec file for shared services?
For example: In planning if the .sec file corrupted then we replaced with old .sec file...rite...the same way can we do it in shared services?
I know if we replace the old sec in planning...it will take old securities only...
Edited by: Prabhas on Feb 12, 2013 9:27 PM

GRC Access Control 5.3 Organizational Levels - logical AND - OR changed

Hello GRC Community,
We are working with Access Control 5.3 SP 12 and we are setting up organization levels for the risk analysis.
The setup is loaded with a flat file, and the configurations seems to be loaded in the right way.
Doing the configuration on the RAR portal, openning the tab "rule architect" then "organization rules" and "create", we have this information:
Organization Rule: Z001
Description: TEST
Risk             Organization Level     from            to             search type     Status
F001*     BUKRS               PRE0                  AND                  Enabled
F001*     EKORG               PR00                 OR                  Enabled
F001*     EKORG               PR01                 OR                  Enabled
F001*     EKORG               RP00                 AND                  Enabled
F001*     VKORG               RP00                 OR                  Enabled
F001*     VKORG               RP01                 OR                  Enabled
F001*     VKORG               RP02                 AND                  Enabled
F001*     WERKS               SV00                 OR                  Enabled
F001*     WERKS               VS00                 OR                  Enabled
Finally save button.
When we want to edit an organization rule or add new one with the screen of organization rules, after saving we have the next result when load the rule again:
In the case of the same organization rule (Z001), the RAR returns this info:
Organization Rule: Z001
Description: TEST
Risk             Organization Level     from            to             search type     Status
F001*     BUKRS               PRE0                  AND                  Enabled
F001*     EKORG               PR00                 OR                  Enabled
F001*     EKORG               PR01                 OR                  Enabled
F001*     EKORG               RP00                 OR                  Enabled
F001*     VKORG               RP00                 OR                  Enabled
F001*     VKORG               RP01                 OR                  Enabled
F001*     VKORG               RP02                 OR                  Enabled
F001*     WERKS               SV00                 OR                  Enabled
F001*     WERKS               VS00                 OR                  Enabled
So the RAR has changed the logical AND for OR.
Why is it happening? This effect doesnt happen if i made an upload from a ftlat file of organizational rules.
We already tryed this symptom doing the same exercise with RAR SP 14 with the same issue.
Thanks in advance for all your comments
Regards,
Alejandro
Edited by: Alejandro Acuña Acosta on Jun 3, 2011 8:53 AM

Hi,
>
> 1. The Addons HR and NonHR are installed on the erp?
>
Yes.
> 2. The GRC could be an stand alone java server?
>
It should be on separate server.
> 3. The Spro config for process control is configured on the ERP or the grc server?
>
ERP server.
Thanks
Sunny

Configure Access Control Owner screen

Hi All,
I am working on SAP GRC project and it's very new to me. I have one user and that user has Access control owners screen.
This role displaying all the Central Owner in the table. When I click one role than Open button gets activated. When i click open button it's navigating to Owner assignment screen in Central Owner Administration. In here i am having two doubts,
1. Is this possible to create duplicate screen of Owner assignment screen
2. If possible how to configure that in Access Control Owners screen.
Your valuable answers will be appreciated.
Thanks in advance.
Regards,
Kathiresan R

Hi Kathiresan,
its not possible for creating duplicate entries for one user with similar owner administration in Access Control Owners tab.
and it is possible, for one user we can able to assign multiple responsibilities.
Once we are in to Access control Owners screen
-> select the user id which you want assign additional responsibility like Risk Owner, MC owner and FF role owner etc.
-->Click on open button and select multiple responsibilities and save the data.
And make sure that user should have the required roles before assigning the responsibilities in access control owners.
Thanks,
Siva

Assign access control,http 404 error

Hi,
when i right click on assign access control,i receive the following error:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the server111:19000 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Can you help me in this regard ?
Thanks,
ColDFire

ak123 wrote:
Its the same when I try from both port 28080 and 9000.So are you running the embedded http server on port 9000? if not and you are using OHS then try accessing Shared Services through that port e.g. http://<sharedservices>:19000/interop/index.jsp
Actually I am not sure that matters with HFM and you can go direct through 28080 or 19000, worth a try, if not maybe it just needs registering again as Pablo said.
Cheers
John
http://john-goodwin.blogspot.com/

Can't Add To Access Control List Airport Express

We have both Airport Extreme (2) and Express Base Stations (3) to create a wireless network. On the Extremes I can click the Add button in Access Control in the Airport Admin Utility to add people to the list. On all the Express Base Staions I can edit or delete entries already on the list but can't add any new ones. I can export an Access Control List but not import one. The button is greyed out only the button works. I could add to the lists in the past and I'm not sure when it stopped working. The network structure and settings have not changed. Has anyone heard of this problem?
Aiport Express Mac OS X (10.4.8)

WDS is used on two Express units to relay the signal from the main base station but not on third one which is connected directly to the network via ethernet.
On the internet connected Express the Airport Network setting is:
Wireless Mode: Create a Wireless Network (Home Router)
All base stations have the same name to allow roaming.
Internet is connected using Ethernet.

More than 1 user access control of vi via web browser

Hi all,
Currently I've a vi that need to share it with other PCs using web browser (eg: IE) I've tried using Web Publishing Tools and I noticed that only 1 pc at a time can grant access control of the vi. May I know is there any methods or other 3rd party software that could possibly able to give multiple PCs to control one vi simultaneously over the net using web browser? THANKS!!!...

Hello,
I’m not so sure that using VNC or remote desktop to have
multiple users control LabVIEW is really in-line with our license policy. I suppose if you built your program into an executable
and had the VNC users access the exe program they wouldn't really be using the development
environment so I suppose this would be ok…
I found a tutorial which might help. Check out: http://zone.ni.com/devzone/conceptd.nsf/webmain/bc79065d8b2e0d0886256c590072a454.
Hopefully this will help out for now! Let us know if you have questions-
Travis M
LabVIEW R&D
National Instruments

Access "controls" or buttons on a LabVIEW VI with DLL

Similar Messages

Maybe you are looking for