Access SAP database table from different SAP server

Hi,
May i know is that possible to access the SAP database table from server A to server B without write a program on server A? Is it possible for direct access the SAP database table.
Best regards,
Gan

Hello,
you could use the RFC-Modules RFC_READ_TABLE or RFC_GET_TABLE_ENTRIES on server A.
Precondition: you need a RFC-Destination from B to A.
And a little drawback: you get only the first 512 byte of each table entry.
Regards Wolfgang

Similar Messages

How to access the database tables from application

Hii all,
The information in webcenter content, such as meta data fields, users, security groups etc are stored in
database tables like- Revisions, SecurityGroups, Users, DocType etc..
Can we access this tables from an adf application or any webcenter application..
If yes, then what can be the approach for that..??
Another things, how can we create custom tables just like the predefined tables...??
Any information regarding this.??
Thanks

Can we access this tables from an adf application or any webcenter application.Yes, you can - like to any other existing database. But I would strongly discourage you from any, but read-only access, or you can easily end up with inconsistent data.
If yes, then what can be the approach for that..??Just create a database connection and define in your model what tables you want to access.
Another things, how can we create custom tables just like the predefined tables...
Actually, WebCenter Content provides functionality of creation of custom tables (see http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c04_metadata.htm#autoId2 ) and these are probably the only good candidates for read-write access. See further in the manual what use cases are supported. Of course, you could do this even externally, but rather than Data Definition Language, I'd use services (if there are some).

HI,Can anybody pls explain me, while extracting database table from sap-r/3

HI,Can anybody pls explain me, while extracting database table from sap-r/3 to sap-bw using GENERIC DATA SOURCE it will ask us Name of the APPLICATION COMPONENT what does it means?

Application Component is a collcetion of tightly coupled S/W component. You can think of it is like folder, where all the related S/W will be put in. Like MM will have all the DS related to MM.
Thanks..
Shambhu

What permission is needed for a login to access the restored database(backup from different server)

what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.

Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Accessing tables from different schema in CDS and AMDP

Hi All,
We are working on a HANA system which has several schema replicated from SAP R/3/Non SAP systems. We have BW 7.4 SP9 deployed on the same system and accessing the HANA views using latest BW virtual objects such as Open ODS , Composite providers etc.
We are also using the BW system for few ABAP based data processing developments. We are currently accessing HANA views in ABAP programs by creating dictionary views based on external HANA views.
We would like to however use recent possibilities of CDS and AMDP for better life cycle management of ABAP based solutions. The open SAP course on this subject was of very good help. Thanks a lot "open SAP team" for that. I would however have few open questions,
As I understand AMDP gives us full flexibility of writing sql procedures within ABAP development environment, but can we access tables from different schema into AMDP code. If yes, then sample code would help.
If the answer of first question is yes, then how do we manage transports between development and production systems where the schema names would be different. Currently in open HANA developments, such transport is manged using Schema mapping.
Can I also use different schema tables in CDS views.
We are updating few tables in ABAP dictionary after applying processing logic in ABAP program as detailed in step 1. With the new approach using AMDP, can we directly update database schema tables which will give us an optimization advantage.
New ABAP HANA program interfaces are quite promising and we would like to use them to optimize many data intensive applications.
Thanks & Regards,
Anil

Hi Anil,
I can only answer 1. and 2. (and would be interested into 3. as well):
1.
Yes you can access tables from a different schema and also HANA views. In this case no 'using' is needed.
Examples:
    RESULT = SELECT
    FROM
          "SAP_ECC"."T441V" AS t,
          "_SYS_BIC"."tmp.package/AFPO" AS a.
    WHERE ...
2. In this case, if you need schema mapping: You could use HANA (projection) views which just forward to a different schema, also see example.
Best regards,
Christoph

Populating SAP Database table using JDBC adapter

Hi Folks,
I have a requirement to populate a SAP database table say ZTABLE using XI. The Model is the table has to be populated through a file which will be processed by SAP XI. Basically this is a File to JDBC scenario. The database used is ORACLE. Kindly provide me some idea to go ahead.

I tried to place the MS access table in the shared folder of the Application server system but still it seems the table is not being populated.
did you check the log in your receiver channel? (/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn)
The requirement is to update the tables directly as those are the custom tables.
i would still say that do not update SAP tables directly from XI/ PI.....this is not a standard architecture/ solution....

How to Import/Export database tables from one server to other in oracle8i

Hello friend,
Please can any one tell me how to import/export groups of database tables from one server with oracle to another using VB.net. It would be nice if some one can provide some code of it.
I am a software developer and I am in middle of a large project development, in which I need to export a large oracle database from one server to another efficiently.
Its very urgent so please someone help me.

At command prompt (source db)
set ORACLE_SID=db_name
exp system/password@db_name full=y buffer=104857600 file=(c:\file1.dmp, c:\file2.dmp....) log=c:\exp.log filesize=2000M
Then ftp the export dump files (in binary) to the other server or copy to target server over the network.
At command prompt (target db)
set ORACLE_SID=db_name
imp system/password@db_name full=y ignore=y buffer=104857600 file=(c:\file1.dmp, c:\file2.dmp....) log=c:\imp.log filesize=2000M
If the path names of the datafiles are going to be different in the target server (as compared to the source), then precreate the tablespaces before import. Set buffer value accordingly.
Message was edited by:
FeNiCrC_Neil

The relationships and links between the various SAP database tables

Hi Gurus,
I am trying to learn the relationships and links between the various SAP database tables (SAP FI-AA, SAP SD, SAP MM, SAP HR and so on) for correctly extracting data from them. Especially I am expressing an interest in the SAP database tables on SAP FI-AA, SAP SD, SAP MM, SAP HR. Could somebody provide me with documentations about the relationships and links between them. I will be very grateful if somebody can provide me with links.
Thanks and regards
Sergey

hi Sergey,
try
http://www.erpgenie.com/abap/tables.htm
http://www.erpgenie.com/abap/tables_fi.htm
http://abap4.tripod.com/SAP_Tables.html
http://abap4.tripod.com/Finance_Tables.html
http://www.auditware.co.uk/SAP/Extras/SAPTables.pdf
hope this helps.

Accessing Release Strategy defintion from outside SAP

Hi !
I'm trying to integrate SAP MM with other 3rd party application. We want to access and read SAP's release strategy definitions and also document classes, to avoid having to maintain that information from the 3rd party too.
Is there any standard approach to access this info ? a BAPI maybe ? or do we have to access the data tables from a custom made RFC that reads specific tables ?
Thanks.
Regards,
Matias

Hi Rajoo,
As per I know, in standard sap, you can achieve this requirement.
Just make sure you have the characteristic for Total net value (CEKKO-GNETW) , and maintain the currency to USD. As long as you have USD to INR conversion in OB08, the system will able to fetch the correct release strategy for the PO based on the amount you set in the Release strategy.
Regards,
w1n

How to join tables from different databases (DBLink/DB connection )

Hello,
i have an issue and i hope you could help me to solve it. My problem is: I want to create native sql select which joins two tables from different DB (both of them are ORACLE, one of them internal, another one - external). I have found several notes and posts, but without any success. Db connection exists in dbcon table, so this part of my problem has been solved.
I would like something like that:
select * from table1@xxx inner join table2.
i can not split this select into two separate ones, because both tables store over 30 mln. entries and i do not want to create any copies of them.
Br,
dez

Hi,
you might need to create a DB-Link on DB level and use EXEC SQL.
Lots of stuff on google about this, like
Oracle DBLink ( external database )
Volker

Uploading Excel file into SAP Database table?

I built a table in the SAP Data Dictionary, and i need to write a program that uploads the Excel table, into the SAP Database table. Does anybody have a sample program that may help me? Thanks!

TYPES:
     BEGIN OF ty_upload,
     matnr like mara-matnr,
     meins like mara-meins,
     mtart like mara-mtart,
     mbrsh like mara-mbrsh,
     END OF ty_upload.
DATA it_upload TYPE STANDARD TABLE OF ty_upload WITH header line.
DATA wa_upload TYPE ty_upload.
DATA: itab TYPE STANDARD TABLE OF alsmex_tabline WITH header line.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename    = 'C:\Documents and Settings\venkatapp\Desktop\venkat.xls'
      i_begin_col = 1
      i_begin_row = 1
      i_end_col   = 4
      i_end_row   = 65535
      TABLES
      intern      = itab.
if not itab[] is initial.
loop at itab .
case itab-col.
when '0001'.
it_upload-matnr = itab-value.
when '0002'.
it_upload-meins = itab-value.
when '0003'.
it_upload-mtart = itab-value.
when '0004'.
it_upload-mbrsh = itab-value.
append it_upload.
clear it_upload.
clear itab.
endcase.
endloop.
endif.
loop at it_upload into wa_upload.
ztable-matnr = wa_upload-matnr.
ztable-meins = wa_upload-meins.
ztable-mtart = wa_upload-mtart.
ztable-mbrsh = wa_upload-mbrsh.
insert ztable.
endloop.

Logical database vs direct access of database table

Hi
I have created a FI report. I am trying to get data from large FI tables like BSAK, BSEG, BKPF, RSEG. eventhough there are 10 records as per my criteria, system is taking morethan an hour time even in background processing. This may be becaz of lot of conditions that I am applying to filter the data. But still trying to improve the performance
For fetching data which is the better way for getting optimum performance of the report.
a) directly fetching data from database tables
b) using logical database collecting data into an itab
regards,
mallik

Hi,
If you are accessing the database tables more than once with different criteria then definetly it will take more time. In such case write only one Select statement on the table and get all the required data into an internal table and then process this internal table as per your logic.
Use of LDBs is definetly faster but filter conditions might not match with your filter conditions. In such case direct access of database table is preferable but as i said in above paragraph.
thanks,
sksingh

Updating database table from an internal table

Hi All,
I am updating a database table from an internal table.
I am changing the non-key fields in that table.
when I check sy-subrc = 4.
Record already exists, because I am changing non-key fields of the
database table.
Is there any addition like to accept the duplicate keys with update.
Alternatively, I have used Modify, It is adding new record,
Again, I have search the old record and use Delete on the database table.
Thanks & Regards,
Kalyan Chandramouli
SAP ABAP Consultant

Hi,
You are right, the field which I am trying to change is a part of primary key.
Because, sy-subrc = 4. says,
No line with specified primary key exits in the database table.
I have a Z-tabel, with Kunnr Vkorg Matnr Bzirk Bztxt Split_percentage
In this table primary key consists of KunnrVkorgMatnr+Bzirk.
I am able to change the Split_percentage using UPDATE.
Now, my client want to change Bzirk, Bztxt also in the table.
How can I Go.
Thanks & Regards,
Kalyan Chandramouli
SAP ABAP Consultant

Loading a database table from a UNIX file

hi,
Need A program to load a database table from a UNIX file
thnks.

HI,
report zmjud001 no standard page heading.
tables: z_mver.
parameters: test(60) lower case default '/dir/judit.txt'.
data: begin of unix_intab occurs 100,
field(53),
end of unix_intab.
data: msg(60).
***open the unix file
open dataset test for input in text mode message msg.
if sy-subrc <> 0.
write: / msg.
exit.
endif.
***load the unix file into an internal table
do.
read dataset test into unix_intab.
if sy-subrc ne 0.
exit.
else.
append unix_intab.
endif.
enddo.
close dataset test.
***to process the data. load the database table
loop at unix_intab.
z_mver-mandt = sy-mandt.
z_mver-matnr = unix_intab-field(10).
translate z_mver-matnr to upper case.
z_mver-werks = unix_intab-field+10(4).
translate z_mver-werks to upper case.
z_mver-gjahr = sy-datum(4).
z_mver-perkz = 'M'.
z_mver-mgv01 = unix_intab-field+14(13).
z_mver-mgv02 = unix_intab-field+27(13).
z_mver-mgv03 = unix_intab-field+40(13).
to check the data on the screen (this is just for checking purpose)
write: / z_mver-mandt, z_mver-matnr, z_mver-werks, z_mver-gjahr,
z_mver-perkz, z_mver-mgv01,
z_mver-mgv02, z_mver-mgv03.
insert z_mver client specified.
*if the data already had been in table z_mver then sy-subrc will not be
*equal with zero. (this can be *interesting for you - (this list is
*not necessary but it maybe useful for you)
if sy-subrc ne 0.
write:/ z_mver-matnr, z_mver-werks.
endif.
endloop.
1. This solution is recommended only if the database table is NOT a standard SAP database table .
Cheers,
Chandra Sekhar.

Copy table from Ms SQL Server 2005 to Oracle with SSIS package

Hi all
I am witting an SSIS package to copy 2 tables from Ms SQL Server 2005 to an Oracle 10g database.
Problem: I can only see the Microsoft OLDB Provider for Oracle and it is too slow. How can I use the Oracle ODBC in aMs SQL Server 2005 or building a .net SSIS package.
thanks

Yes I am able to see the driver on the Data Source (ODBC), I also created a connection to the Oracle database. The problem in Ms SQL Server 2005 is that the ODBC connection I created is not listed. None of the lo local connections are listed, only Microsoft OLEDB connections

Access SAP database table from different SAP server

Similar Messages

Maybe you are looking for