Accessing SAP Transaction screen from other application

Hi Friends
We have a requirement where we want to access a transaction screen from some other application.
Is there any standard BAPI for doing this (R3 or CRM) ?
Kindly help ....
Best Regards

Hello Pankaj,
In CRM you can use Function Module TRANSACTION_CALL_VIA_RFC to open a transcation screen in another system. This FM takes RFC Target System and TCode as inputs and opens the transaction in the specified system (provided Logical System Name & RFC Connection has been properly made)
If it is IC Web Client, you can use transaction Launcher to do the same, follow the blog created by Raja G for the same.
The link to which I am providing underneath:
/people/raja.g/blog/2007/01/24/displaying-r3-transaction-in-icwc-application
Regards,
Khushboo
<b>Reward with points !</b>

Similar Messages

  • Accessing SAP Transaction Screen from 3rd party Application

    Hi friends
    We have a requirement where we want to access a transaction screen in SAP from a 3rd party application.
    Can anybody guide us, as to how can this be done through ITS, if at all its possible??
    Kindly guide...
    Thanks in Advance

    what sort of 3rd party application, you wanted to show the sap gui screenin the 3rd party application?
    if its a web application, then you can just embedd the sap gui screen using frame/iframe with its url for that transaction.
    if its a windows based desktop application, you can use sapgui scripting to do the same.
    Raja

  • How to access SAP Solution Manager from webDynpro Application.

    Hi to all,
              I have to retrieve some informations from SAP Solution Manager. and update some recordes there itself. How could i do it??
              If anybody have codes related to it please send the same.
    Please help its urgent.
    Waiting for reply.
    Thanks and Regards;
    Pankaj Kumar.

    Hi
    See this help
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/6e8c42c398173be10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4c/758c42d781d665e10000000a155106/frameset.htm
    Kind Regards
    Mukesh

  • Access Address Book from other applications

    Hi there,
    How can I access Address Book information from other applications (notably the command line, OpenOffice, etc.)?
    In particular, is there a command line utility to access and edit the Address Book?
    Thanks!
    Brian

    One of the best answers would have been the CPAN module: Mac::Glue. Cheers.

  • Access resource from other application using JAAS

    i use JAAS for autenticate and autorizate in my web application, but i need access a resource from the other application , but this application don�t use JAAS.
    How can i acces this resource from other application?
    i know need send the parameters JSESSIONID, but , always redirecto the login page.
    thank you for your help

    your signon url is consists of the following url http://server.domain.com:port/site/signon.html
    Can you ping server.domain.com from your client?
    If you can ping it, then make sure your port is added as a rule in the firewall of the server.
    Also make sure that the proxy setting of the client have an exception to server.domain.com.
    If you cannot ping it, make sure the server and the client are conneted to the same network and make sure the hosts file on the client reflects the ipaddress and the hostname of the server.
    Hakan

  • Adding fields/text on standard SAP transaction screens

    Hi,
    How do we add the fields on standard SAP transaction screens?
    For example, if I have to add field on transaction FB01 screen or change text of existing fields, how does it works?
    Please let me know.
    Thanks ,
    Yogita

    hi
    every standard sap transaction have enhancement options you can add fields there
    try this program to find the field-exits of the standard transaction.
    [https://wiki.sdn.sap.com/wiki/display/Snippets/howtogettheuser-exitsofa+transaction]
    regards
    sarves

  • Call std sap transaction mm03 from bsp

    Hi
    please can any body tell me.
    How do i call a std sap transaction mm03 in bsp application.
    is it possible to use call transaction statement directly or any other way.

    Hi sushilnath,
    Please try this blog : <a href="/people/thomas.jung3/blog/2005/11/04/bsp-150-a-developer146s-journal-part-xvii--recreating-a-standard-transaction">BSP – a Developer’s Journal: Part XVII - Recreating a Standard Transaction</a> by Thomas...
    This might help you....
    Hope this helps.
    <i><b>Do reward each useful answer..!</b></i>
    Thanks,
    Tatvagna.

  • Create package with prompt from other application

    Hi Experts!
    I need to create a package in the planning application. In the screen selection I need some dimensions of my planning cube and one dimension of the Ownership application. I don't have any problem with the current application dimension, but I need to retrieve the members of INTCO dimension from Ownership because the user should make the selection. Is it possible to create a prompt from other application?
    Thanks!!

    I create the package in Planning application: 
    PROMPT
    (SELECTINPUT,,,"Selction members","%ENTITY_DIM%,%CATEGORY_DIM%,%TIME_DIM%,%CURRENCY_DIM%,INTCO")
    When i try to select one member of INTCO dimension it appear the following message: "Dimension INTCO is not found". BPC is not finding this dimension because it pertain to another application.

  • Unable to receive special characters in XML using UTL_HTTP request from Other application

    Hi Team,
    We are using SOAP request in Oracle Application to Pull XML data from Other application.I am using below commands before receving response but still i am unable to receive special charcters/Spanish Charcters in XML.
    utl_http.set_body_charset(v_http_req, 'UTF-8');
    utl_http.set_header (v_http_req, 'Content-Type', 'text/xml');
    Thanks and Regards,
    Raghul

    Hello,
    Just when you think that you know everything, it is slammed in your face that you don't. The .Mac member name field in the System Preferences DOES NOT take your whole e-mail address. It only takes your user name or whatever comes BEFORE the "@" symbol. There was absolutely nothing wrong with my MacBook Pro (other than ther brain dead user).
    Sorry for wasting your time...
    If we learn from our mistakes, then I obtained my PhD years ago,
    Dr. Z.

  • Is Jolt usable from other application servers?

    Hi All
    Is Jolt usable from application servers other than Weblogic?
    Thanks,
    Rob

    Rob,
    WTC is usable only from Weblogic. Jolt is usable
    from other application servers.
    Bob Finan
    "Rob" <[email protected]> wrote in message
    news:3f4fed5b$[email protected]..
    >
    Hi All
    Is the Weblogic Tuxedo Connector usable from other application servers?I'm primarily
    interested in using the WTC from JBoss.
    Additionaly, does anyone know if Jolt is usable from application serversother
    than Weblogic?
    Thanks,
    Rob

  • Transfer postings from other application components to accounting

    Hi expert, we have to transfer posting from other application components(SD,MM) (system A) to accounting (system B, FI/CO module only).
    Is there any related documents of this aspect? 
    Best wishes,
    Evan

    Hi!
    It will be not so easy. You have to set up an interface between the 2 systems.
    If you are using IDoc based interface, you can send IDocs from SD, when an invoice is enable to accounting.
    You might check out user exits (programs) RV60AFZA, RV60AFZB for this.
    Sorry, but this task will be not ready in 10 minutes...
    Regards
    Tamá

  • "Error occurs when loading transaction data from other model" - BW loading into BPC

    Hi Experts,
    I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
    If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
    Task name CONVERT:
    No 1 Round:
    Error occurs when loading transaction data from other model
    model: AIACONS. Package status: ERROR
    As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
    Has anyone encountered similar or have any ideas as to the problem?
    Best,
    Chris

    Hi Vadim,
    It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
    We get a warning when we try and validate the transformation file:
    "Error occurs when loading transaction data from other model".
    This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself.  The validation log says:
    Validate  and Process Transformation File Log
    Log creation time
    3/7/2014 16:09
    The result of validation of the
      conversion file
    SUCCESS
    The result of validation of the
      conversion file with the data file
    FAIL
    Validation Result
    Validation Option
    ValidateRecords = NO
    Message
    Error occurs when loading transaction data from other model
    Reject List
    I can't find any errors anywhere else.
    Best,
    Chris

  • Create DLL from labview and calling it from other application

    I have an application built using Labview. I wanted to create DLL out of it. The application has
    two String inputs start and stop buttons and two status indicators.
    1. How to itegrate start and stop buttons from function prototype?
    2. Does Labview created DLLs requires labview runtime engine when it is to be called from other application?
    Can some one help on this.
    Solved!
    Go to Solution.

    Hi Yuvish,
    1) They should be boolean inputs to your VI. But does it makes sense to provide a stop button input at the start of your VI? (THINK DATAFLOW!)
    2) Yes, the LV-RTE is needed...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Error occurs when loading transaction data from other model

    Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/  complete with all the mappings, i am getting the same error as above.
         I can see options, mapping and conversion sections are validating successfully and throwing the above error.
    Incomplete Transformation File
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = ,
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT= 10
    ROUNDAMOUNT=
    *MAPPING
    CUSTOMER = *NEWCOL (NO_CUST)
    Validating the transformation files
    Validating options...
    Validation of options was successful.
    Validating mappings...
    Validation of mappings was successful.
    Validating conversions...
    Validation of the conversion was successful
    Creating the transformation xml file. Please wait...
    Transformation xml file has been saved successfully.
    Begin validate transformation file with data file...
    [Start test transformation file]
    Validate has successfully completed
    ValidateRecords = YES
    Error occurs when loading transaction data from other model
    Validation with data file failed
                           I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
    Thanking you
    Praveen

    Hi,
    By
    *MAPPING
    CUSTOMER = *NEWCOL (NO_CUST)
    you want CUSTOMER to receive a fixed string "NO_CUST"?
    If so use,
    *MAPPING
    CUSTOMER = *STR (NO_CUST)

  • Error occurs when loading transaction data from other cube

    Hi Gurus,
    I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
    Can anybody help me to solve this problem?!
    Thanks a lot & Best Regards,
    HH

    Hi,
    Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
    *OPTIONS
    FORMAT = DELIMITED
    HEADER = YES
    DELIMITER = ,
    AMOUNTDECIMALPOINT = .
    SKIP = 0
    SKIPIF =
    VALIDATERECORDS=YES
    CREDITPOSITIVE=YES
    MAXREJECTCOUNT=
    ROUNDAMOUNT=
    *MAPPING
    Category=*NEWCOL(ACTUAL)
    P_0BASE_UOM=0BASE_UOM
    P_0BUS_AREA=0BUS_AREA
    P_0COSTCENTER=0COSTCENTER
    P_0FUNDS_CTR=*NEWCOL(null)
    P_0GL_ACCOUNT=0ACCOUNT
    P_0LOC_CURRCY=*NEWCOL(MXN)
    P_0MATL_TYPE=*NEWCOL(null)
    P_0VENDOR=0VENDOR
    P_DataSrc=*NEWCOL(UPLOAD)
    P_ZMATERIAL1=0MATERIAL
    P_ZMATERIAL2=*NEWCOL(null)
    P_ZMATL_CLASS=*NEWCOL(null)
    P_ZMATL_TESP=*NEWCOL(null)
    P_ZRATIO=*NEWCOL(KF_inpmdInt)
    Time=0CALMONTH
    SIGNEDDATA=0TOTALSTCK
    *CONVERSION
    Time=Time_conv.xls
    EXTERNAL     INTERNAL
    201101          2011.JAN
    201102          2011.FEB
    201103          2011.MAR
    201104          2011.APR
    201105          2011.MAY
    201106          2011.JUN
    201107          2011.JUL
    201108          2011.AUG
    201109          2011.SEP
    201110          2011.OCT
    201111          2011.NOV
    201112          2011.DEC
    Thank you for taking at glance to the files.
    Best Regards,
    HH

Maybe you are looking for