Accessing the hard drive of a Time Capsule with Windows XP

Hi,
I have a time capsule configured in client mode so that I could share a printer and a hard drive on my existing wireless network. I now can print from both computers and I can acces the hard drive with the mac that I used to configure the time capsule.
But I can't find anyway to access the hard drive from the pc. When I use AX to connect as a guest it's giving me an error "user unknown or session desactivated contact the admin (67)". (The config is authorizing guests so it should work)
What's wrong ?
Thanks for your help,
Julien

FireWire Target Disk Mode requires two Macs.
Can you remove the hard drive from teh PC laptop? If so, you can use one of these:
Newer Technology Universal Drive Adapter USB 3.0 - connects any 2.5", 3.5" or 5.25" drive
to mount the drive on the Mac. most Macs will read PC drives. You can't salvage applications but you may be able to recover data files.

Similar Messages

How to access the hard drive in my Time Capsule via ethernet, not wireless

I have a new Netgear 802.11ac router with ethernet ports. I also have an older (4 years old) Time Capsule that I replaced with the new Netgear router. My iPhoto library was recently corrupted (long story there). I don't have a backup except on my Time Capsule. How do I access the Time Capsule's hard drive over ethernet so that I can copy the iPhoto Library off of it and onto my Thunderbolt external hard drive? It's the only chance I have to save years of photos (my iPhoto library is 258 Gb large). I don't want to do this wirelessly. I've tried using ethernet cable from the TC to my Macbook Pro and to one of the ethernet ports on the Netgear router, but to no avail. I'm sure it's got to be simple but I've almost given up trying different configurations.

Plug the TC directly into the netgear by ethernet.
Then do a factory reset. This will not harm your existing backups in any way.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Connect to the TC by wireless.. this is just to do the setup..
Put the TC in bridge mode.
The TC will now appear as a client in the Netgear and should be accessible.. if not there is something else going on.. the Netgear may not be working properly with the TC. It happens.
I am not sure what equipment you have.. but if you have a thunderbolt connected hard drive.. how are you then connecting by ethernet to the Netgear.. as I understand it, unless your hard disk has a thunderbolt passthough port.. and you have tested and found the ethernet does still work with the hard disk in the chain.
There is no reason you cannot do it direct to the TC if you have enough ports. But the TC should be reset as above so it is in router mode. That is the only way you can connect to it as otherwise it is bridged.

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

I'm a beginner with iMovie and my hard drive is filling up fast. How do I move the event files from the hard drive to my time capsule?

you should never (ab)use a designated backup-setup for 'ordinairy' storage tasks.
plus, the wireless connection to TC is too slow for iMovie.
purchase any ext. usb-harddrive, 500Gigs starting at 50$ ...
you HAVE to follow advice given here:
http://help.apple.com/imovie/#mov3ac6d42c

Can I plug the hard drive from my Time Capsule into my PC?

My laptop's hard drive recently died and the chance of being able to recover any data from it is pretty slim. To make matters worse, i've been meaning to buy a new Time Capsule for a while as mine is no longer functioning correctly (won't let me connect even with a solid green light).
I'm hoping that's the fault of the rest of the Time Capsule, and not the hard drive and its contents. So, would it be possible to plug the Time Capsule's hard drive into my Windows PC and somehow recover the data from there?
Thanks!

The only files you can recover are ones you put there.. so the only way and the only person who knows the answer is you.. where did you put the files?
Did you put them in a new folder under the share, data.. then that is where they will be.
If you put them inside the sparsebundle.. you are dead. But if you created a new directory inside the sparsebundle you might still get access to it.. there is only one way to find out.. have a go.. !!
BTW if you did this, that is why you have issues.. putting files inside a sparsebundle will destroy it. Not a great idea. But it is allowed.
Who can know these things.. YOU.. and YOU ALONE.
You might find it cheaper in your case to repair the TC..
If it is Gen 1 or 2, type "Time Capsule Power Supply" into ebay.. without the ""
There are some there to help you fix it.
Or a repairer could help.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s
It is much easier to get your files back from a working TC.

Hard drive networked through Time Capsule for Windows and Mac

My previous setup was using an old Dell laptop with Windows XP to network share both my Samsung laser printer and my Seagate GoFlex 2 tb drive formated to NTFS, and all Windows 7, Windows 8, and OS X 10.6+ machines in the house were successfully able to connect to both. My wife replaced her old Macbook Pro she got in 2008 and decided to get a Time Capsule as well to backup her iMac and new Macbook Air. I decided to take advantage of the "features" of the Time Capsule, and hubbed the single port, just as I had done with the old Dell. After installing Bonjour on the Windows 7 machines I was able to share the printer just fine, however I'm still unable to share the drive for some reason.
The Airport utility on both the Macs and Win 7 machines see the hard drive in utilities, the box in Airport for file sharing is checked, guest access turned off, secure disk sharing with device password, and workgroup matches my workgroup. However the hard drive still doesn't appear. I tried formatting it to FAT32 based on some older forums posted in 2008-2009 range, but then realized the hard drive is too large for that, and I'm not looking to have a bunch of smaller partitions. I tried exFAT, but that failed too. Now I'm back to NTFS, but still with the issue that none of the machines recognize hard drive via the Explorer/Finder.
The Time Capsule is functioning as a backup with Time Machine for her Mac's, but I'm looking to use the external drive connected more as a media center storage and storing selected individual files (think networked thumb drive/USB stick) from my machines.

Put the seagate drive onto the Mac and format it Mac OS extended journaled. (HFS+ for short) and you will also need to change the partition over to GUID from MBR.
TC has very limited formats it can recognise.. FAT32 and HFS+ (well FAT16 but that doesn't count). exfat no, ntfs no, Really with FAT32 being hopeless.. you have one choice .. HFS+.
The Windows machines can handle files to the drive just fine.. because it is a network drive.. it is offered to the network as SMB protocol.. in windows it will look like NT server. The precise format of the drive is irrelevant and is handled by the firmware of the TC.
But do reset the partition scheme to GUID.. not MBR.
http://support.apple.com/kb/ph5845
You can even put 2 or more partitions on it.. but only one is fine.

I can't move any file in the hard drive of my time capsule

Hi all !
I have my time capsule change by a new one because a problem on the main power (warranty), when i received the new one they made a backup of all of my files inside a new "data" name folder, the class i see in the finder for that new folder is "sharepoint"... but i can't move or create any file or folder diferent than the "Data" folder because finder don't let me do that... i think it a permissions problem but i don't know how to change it.
Could anyone help me ?
Thank u !
Regards.

I have found the solution to my problem, I just needed to shut down and restart my iPad and now I can see the email text in the text field.

External hard drive connected to Time Capsule for iTunes.

I have copied my iTunes library to an external hard drive and connected the hard drive to my time capsule. I have an iMac and a MacBook and want to see the same iTunes content on each. I want to use the iMac as the main place to add iTunes content and see the results on the MacBook. I have told both iTunes (the iMac and the MacBook) the location of the hard drive, but I see different content on each. For example, if I add new music to the iMac I can't see it on the MacBook.
I sync iPads, iPhones and iPods via the iMac, but don't think this has any bearing on the problem.
Any suggestions on how to resolve this gratefully appreciated, and thanks in advance.

Welcome to the discussions, squire78!
If your external drive is connected directly to your computer, you can have Time Machine backup both your computer and the external drive.
If the external drive is connected to the USB port on the Time Capsule, Time Machine cannot backup this drive.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data.

I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.

Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself.

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue. However, I do not know how to access the hard drive with either my Windows computer or the Ipad. Does someone know how?

On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
Type the name directly into windows explorer.
\\TCname or \\TCIPaddress
If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
Ensure windows is able to at least ping the TC by IP address and name..
Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

If someone really wants to do something, it won't take them long to find out how to do it.
http://pondini.org/TM/17.html
Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

I don't think backup is supported but you may be able to access the TC's internal drive, from the iPhone, with an application like: NetPortal
Note: I haven't actually tried this app, so if someone else has and was successful in accessing the TC's drive they can certainly chime in.
Follow-up. Just downloaded and installed this app ... and I can now verify that it, indeed, can access both my TC's internal and externally attached USB HDD.

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

Mixing files with data is not always great idea.
See info here.
Q3 http://pondini.org/TM/Time_Capsule.html
Why not just connect the PC directly to the TC by ethernet and copy the files over?
It is hugely faster and much less mucking around.
In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
There is more info here.
http://support.apple.com/kb/HT1331

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If i connect an external hard drive to a time capsule, can i access this drive via internet?

If the drive can be accessed in local lan, then it can be accessed from internet assuming you have setup using one of the remote access methods.
See remote access here.
https://discussions.apple.com/community/wireless/airport?view=documents

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

Searching external hard drive attached to Time Capsule

I have a 1 TB Time Capsule which I use for backing up my 2011 MacBook Pro and for providing my WiFi. I also have a 1 TB external hard drive plugged into my Time Capsule which I can access via WiFi. I can go to Finder on my laptop and browse the folders/files on my external hard drive. It appears under Shared in the sidebar of the Finder window. I can open files from it and I can save files to the drive, so it appears to be working fine. I have hundreds of gigs of files on the drive. But when I was recently hunting for a specific file, I noticed that my Spotlight wasn't doing a very good job at finding files on my external hard drive. I tried many different searches - by name, by type, by date - and had no luck. But as I was searching, I realized that I had more files of certain file types than Spotlight was showing me. So I tried searching for files I first confirmed were actually on the external drive. And again Spotlight failed to find them. If I used a partial filename search, it would find some files that matched but not the ones I was looking for.
So, this led me to think the index is corrupt. I'm not sure if this problem is related to my recently upgrading to Lion or not, since I haven't had to search the drive in awhile. I tried to force Spotlight to recreate the index on the drive by using the Privacy panel trick (of the Spotlight Preferences) but that didn't work. I then tried to get Spotlight to recreate its entire index and I think all that did was recreate the index for my internal harddrive.
So, are there things I need to know about attaching an external hard drive to a Time Capsule that I perhaps forgot to do? Should I be able to search the drive with Spotlight? Do I have to somehow force Spotlight to look in external drive when doing a search or is it supposed to search everything it can?
I should mention I have been having a little trouble with my Time Capsule as well. I recently had to erase the drive and set up a whole new backup since the backup was failing - not sure what happened to it, but it seems to be working again now. But I did notice yesterday that my Time Machine hadn't backed up all day but it was not giving me a warning message. It was just sitting there not backing up. I had tried resetting my PRAM and after doing so, my Time Machine was back to backing up. I'm not sure if the PRAM reset helped with that or if it was just the restart of the laptiop.
One more thing - I feel like since upgrading to Lion I have had to restart my laptop more than ever. Things just start acting funny, especially when I am using Safari and I find myself resetting Safari and then restarting my laptop all the time. Odd.

It should be HFS+.. it may work with fat32 but that is a lousy format.
The actual format of the drive is irrelevant to the PC.. the TC offers SMB connection.. so it is a true file sharing device.. the format used to store the files cannot be directly read by windows but is "interpreted, translated" via the firmware of the TC.
BTW this is true of all network storage.. A NAS can store files in whatever format its OS requires.. freebsd like freenas might use XFS.. or linux use EXT2 or REISFS.. it makes no difference as long as it offers that store to the windows (and apple) network as SMB.. then windows can handle it.

Accessing the hard drive of a Time Capsule with Windows XP

Similar Messages

Maybe you are looking for