Accounting for Multiple Cygwin Paths for Windows Hosts

Hello everyone,
We are using EM12cR2 (installed on RHEL) but need to monitor a number of Windows hosts. For most Windows hosts, Cygwin is installed in the default path (C:\cygwin) but we also have Citrix XenApp servers that we would like to monitor but they do not have a C: drive, just M:. I've seen the settings file that allows someone to change the Cygwin path but I can't find information on whether or not you can add multiple paths to that line and what that syntax would be. I've also seen an older Citrix plug-in but I don't see anything stating it's compatibility with this version of EM. If I could, I would test out a number of scenarios in a lab environment but we don't have that option.
Does anyone know if it's possible to add multiple Cygwin paths (and what the syntax is), if the Citrix plug-in is compatible with EM12cR2, or if there's another way to do this that I'm not thinking of?
Thank you,
EMS

Hi ,
you have to update the following properties in $OMS_HOME/oui/prov/ssPaths_msplats.properties to reflect the new cygwin installation location.
eg.
From
SSH_PATH=C:/cygwin/bin/ssh.exe
SCP_PATH=C:/cygwin/bin/scp.exe
MKDIR_PATH=C:/cygwin/bin/mkdir.exe
SH_PATH=C:/cygwin/bin/sh.exe
CHMOD_PATH=C:/cygwin/bin/chmod.exe
TRUE=C:/cygwin/bin/true.exe
To
SSH_PATH=M:/cygwin/bin/ssh.exe
SCP_PATH=M:/cygwin/bin/scp.exe
MKDIR_PATH=M:/cygwin/bin/mkdir.exe
SH_PATH=M:/cygwin/bin/sh.exe
CHMOD_PATH=M:/cygwin/bin/chmod.exe
TRUE=M:/cygwin/bin/true.exe
thanks,
Prakash

Similar Messages

  • Multiple alias paths for icons

    Is it possible to define multiple alias paths for icons?
    In the httpd.conf I have an alias for example:
    Alias /d6i_icons/ "/devapps/test/aces/graphics"
    In the Registry.dat I have set the iconpath and iconextension as follows:
    default.icons.iconpath=/d6i_icons/
    default.icons.iconextension=gif
    I want to add an additional path for icons for another system "/devapps/test/iceman/graphics/"
    Is it possible to have 2 paths for the Alias /d6i_icons/ and how do you code this? I have tried defining another alias and adding the other path on the one alias line, but neither worked.
    Thanks!!
    Shellie

    Hi,
    you can only specify one. However, if you store icons in jar files and set documentbase=codebase in the formsweb.cfg file then you can use separate jar files per application
    Frank

  • Error while assigning user for release approval path for payment release

    Hi everyone,
         I am trying to assign user for payment release in SPRO. I have defined upto 'Define relevant document types for release for payment', after that while assigning user in terms of position for release and save it, i am getting error 'Program error: ASSIGN with length 0 in program "MP120800" '.Because of it i can t proceed further.
    The data in details below;
    1. Create Workflow Variant for Release for Payment
       1000     SAP
    2. Assign Company Code Workflow Variant for Release for Payment
      1000     1000     SAP
    3. Define Release Approval Groups for Release for Payment
      0001     Vendor A
    0002     vendor B
    0003     Vendor C
    0004     G/L accounts
    4. Define Release Approval Paths for Release for Payment
      0001     Vendor high
    0002     Vendor middle
    0003     Vendor low
    0004     G/L accounts
    0005     Other
    5. Assign Release Approval Paths for Release for Payment
      1000     KZ     0001     0001
    1000     KZ     0002     0002
    1000     KZ     0003     0003
    6. Assign Release Approval Procedure for Release for Payment
    1000     0001     20,000.00     KES     1     WS10000052     WS00400011
    1000     0002     50,000.00     KES     2     WS10000052     WS00400021
    1000     0003     1,000,000.00     KES     3     WS10000052     WS00400022
    7. Define Relevant Document Types for Release for Payment
         1000     KR
    1000     KZ
    8. Define Users with Authorization to Payment Release
    1000     0001     1     20,000.00     KES
    1000     0001     2     50,000.00     KES
    1000     0001     3     100,000.00     KES
    here i have selected the option and tried to create Orgobject, i am getting following error
    Program error: ASSIGN with length 0 in program "MP120800"
    If any corrections in the definitions, Please let me know.
    Thanks in advance!!

    Hello,
    Please start the report RSWOGIND, set also the checkbox "generate all
    ObjTypes from new". This should solve the problem.
    Best regards, Hana

  • Single invoice for multiple DO & Output for the same!

    Dear Gurus,
    I have configured an output type for Export & its for Collective billing,where we have a contact,a sales order and multiple Outbound deliveries but have one collective billing for multiple DOs.
    Here the issue is :-
    1-when i go for collective invoice ,it does not generate a single invoice with all DOs
    2-thus due to which output too is not getting generated.
    I want the settings needed for collective invoice & output type for this export invoice.
    Regards
    Swati Bhatt

    Hi,
    !- Combination criteria in billing is different (gives two diff nos.)
    In copy control at item level DATA VBRK/VBAP assign routine 001(SAMPLE INVOICE SPLIT)
    2-Number of foreign trade data is diff again.
    Check foreign trade data, It should be same in all delivery document
    kapil

  • Problem for web service path for Xcelsius engage in flash object

    Hi, All
    I had created one xcelsius through Web Service of SAP B1.it works well.
    but when I run the flash object came from xcelsius by explorer,it gives one message
    "Can not access external data"
    thier I have to give path for swf file and web service path -- (which is given at the time of connection of xcelsius through web service in data manager)
    and I have to run the web service then it shows
    the dash board made from Xcelsius very well.
    but when i change the path of same web service to other m/c then flash file does work and it gives message
    "Can not access external data"
    but in practical my web service path can be changed, it should not fixed for path which is given in data manager in Xcelsius.
    I am using Xcelsius Engage 2008 sp3
    please give suggetions for solve the problem
    thanks in advance

    Hi Venky CRMIT, Bruce007
    Aside from the question, I tried another methods and I have succeeded calling webservice. A reference URL is
    http://www.webbasedcrmsoftware.com.au/crm-on-demand-tutorials/65-java-access-to-crm-on-demand#_Toc224720963
    Main cause may be jsessionID as you guess. When I try with EAI, I have send login information and message call at once, so URL may be incorrect.
    Thank you for your help.

  • Support for Multiple Hierarchies defined for the same GL Segment

    Hi,
    In our eBS setup, we have multiple hierarchies defined for a GL Segment.
    OOTB, BI Apps 7.9.6.3 provides support for 10 Segments, and it's corresponding Hierarchies (1 Hierarchy for each Segment).
    My question here is whether OOTB BI Apps 7.9.6.3 supports Multiple Hierarchies for the same Segment?+
    Thanks,
    Ab

    no it is not supported OOTB as of today
    you need to customize ETL mappings and OBIEE metadata to include hierarchy identifiers from the EBS segment definitions.
    Then you have to consider that filtering a hierarchy identifier becomes mandatory during query execution to avoid aggregation of duplicated values.

  • Setting Multiple Report Paths for a Reports Server

    I am sorry for posting here, As I didnot get response from reports forum, I posted here.
    I would like my reports server named ABREP to to read reports from multiple paths.
    We have fmb,fmx,rdf,rep files in /gccapp/TESTAPP & /gccapp/LIVEAPP.
    I tried to follow I need multi report path
    but no luck.
    I give oratest:7778/forms/frmservlet?config=app1&*EnvId=testenv*
    but still it is reading from other location.
    can any one please help.
    My env: 10gdbR2, 10gAS,Solaris
    thanks
    Edited by: userR12 on Jan 16, 2010 6:16 AM

    Thanks for reply. I restarted reports server also. Is my way of writing EnvId in the link is correct?
    I have done the following:
    1. Inserted the following into the report server configuration file:
    <environment id="default">
    <envVariable name="REPORTS_PATH"
    value="/oraas/modlive10g:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/printers:${REPORTS_PATH}:$ORACLE_HOME/reports/winfont"/>
    </environment>
    <environment id="testenv">
    <envVariable name="REPORTS_PATH"
    value="/modapp/modtest10g:$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/printers:${REPORTS_PATH}:$ORACLE_HOME/reports/winfont"/>
    </environment>
    2. commented REPORTS_PATH in reports.sh
    3.
    defaultEnvId="default" added to rwEng line in report server configuration file
    4. Restarted Report Server
    5. in browser appeneded EnvId=testenv to the application URL.
    thanks
    Edited by: userR12 on Jan 16, 2010 10:26 PM

  • Need to capture multiple image paths for responsive design when only one will be displayed at a time

    I'm new to CQ and am having enough trouble following the documentation on image components as it is (why is there no master reference for all this?). I have a requirement where we need to capture three versions of an image and put the URLs into three attributes of a tag. The appropriately sized image will be selected via JavaScript based on the browser/device capabilities. I need to know how to capture those images when seemingly only one at a time can be dropped onto the page. Or perhaps there is a more CQ solution to this.

    Hi,
    You need to customize image component. I mean selected image is a asset in the repository and each asset by default has 3 rendtion generated when the image is uploaded in the dam.
    For example when you upload image.jpg file into the DAM, standard workflow is launched and after a while inside the repository (see paths) are created following renditions:
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.140.100.png
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.319.319.png
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.48.48.png
    This process can be customized by changing /etc/workflow/models/dam/update_asset.html workflow and modifing "Thumbnail creation" step by adding in the Process tab -> Arguments field new values for new rendition. So for example if you add there [400,400] new rendition will be created in the path
    /content/dam/project/image/image.jpg/jcr:content/renditions/cq5dam.thumbnail.400.400.png
    Next step is to customize jsp for image component. Using path to the drag and dropped image from a component attributes you can easily take all renditions iterating on the /content/dam/project/image/yourimage.jpg/jcr:content/renditions node and then set paths to all renditions in the tag attributes. Then like you wrote using js you can select proper rendition.
    I hope that it hepls you.
    Regards,
    Adam

  • Creating Flag formulas for multiple critical paths

    I'm hoping someone can help me.  I'm wanting to use flags to create my top 10 critical paths in MSP2010.  What forumla do I need to set into each flag in order for it to show me the first critical path, then second and so on?
    Thanks
    Sarah

    Sarah,
    I agree with Guillaume in that you need to define what you mean by first, second, etc. critical paths. However given some assumptions, this might work for you. Let's assume that total slack values less than 1 day are the first critical path, values between
    1 day and less than 5 days are the second critical path, and total slack 5 days or greater is the third critical path. The following formulas could then go into the Flag1, Flag2, and Flag3 fields.
    Flag1=IIf([Total Slack]/[Minutes Per Day]<1,True,False)
    Flag2=IIIf([Total Slack]/[Minutes Per Day]>=1 And [Total Slack]/[Minutes Per Day]<5,True,False)
    Flag3=IIf([Total Slack]/[Minutes Per Day]>=5,True,False)
    You can extend this process to additional flag fields and set up Gantt Bar styles to correspond to the flags.
    Hope this helps.
    John

  • SOURCE ATTACHMENT for multiple source paths

    I have a flex app project with the name AppProj.
    I also have a flex library with the name LibProj. It has no SRC folder of its own. It has 3 external folders as source paths ...
    C:\folder\codeFolder1\
    C:\folder\codeFolder2\
    C:\folder\codeFolder3\
    The Main Source Folder is  C:\folder\codeFolder1\
    The AppProj adds the LibProj in the Flex Library Build Path. I check the Source Attachment of the LibProj and it is pointing to C:\folder\codeFolder1\ which is LibProj's Main Source Path.
    Now if I hit F3 or CTRL+CLICK on a class that is in the C:\folder\codeFolder2\ or C:\folder\codeFolder3\ folder, I get the source not found in the swc error.
    How can I specify multiple source attachment or how do I solve this problem.
    Thanks

    In textLayout_build.zip is the source code. http://sourceforge.net/projects/tlf.adobe/files/3.0/current/textLayout_build.zip/download
    All versions of the source code contain CONFIG statements, including the internal ones.

  • Multiple motion paths for my 3 photos

    I’ve been trying to use key frames and motion paths to create a particular effect, but am not really getting anywhere.
    This is what I’m TRYING to achieve using 3 different photos.
    (Step1) Photo 1 appears full screen, zooms out as it reduces in size. Ends up at a position occupying left third of screen.
    (Step2) Cut to Photo 2 full screen, does the same thing – zooms out – reduces in size (in the process revealing small Photo 1 on left). Ends up in middle third of screen.
    (Step3) Cut to Photo 3 full screen – does the same thing – zooms out – reduces in size (in the process revealing small Photo1 on left and small Photo 2 in middle). Ends up on right hand third of screen.
    However, although I have been able to complete these as individual moves on each of the 3 photos, they remain as 3 separate clips in the timeline.
    I can never get the small Photo 1 to be revealed under Photo 2 as it zooms out, or in turn the small Photos 1 & 2 to be revealed under Photo 3 as it zooms out. After a day on this, I’m obviously doing it quite wrong. Maybe it can’t be done in FCP5.
    Any advice appreciated.
    Robert

    Are you putting them on three different tracks?
    Yes, on V1, V2, V3 – but no matter where I put them or how I staggered them in relation to each other, it doesn’t work. Each track totally covers the others up – no “transparency”.
    Before I possibly went crazy I decided to start fresh.
    First, I trashed all my FCP preferences, double checked everything in FCP, and repaired permissions. In FCP I created a new clean “test” project with just the 3 video tracks as before. I also got a friend a little bit familiar with FCP to watch exactly what I was doing. I re-did the three motion paths. Same 3 photos, same moves in each.
    It worked perfectly!
    I don’t know what’s happened. My first attempt was obviously quite wrong somewhere. My old G4 has been a bit cantankerous lately with FCP. It's all very weird.
    Andy - I’m giving you the points, because you forced me to seriously forget about trying to do a fix - instead, redo the whole thing. I’ve lost a day, but it’s been worth it.
    Regards
    Robert

  • Do I need Open Directory for multiple email addresses for Calendar users?

    Hey all,
    I have a single mac mini which I use simply as a calendar server for +/- 20 users. One day I might use Profile Manager to manage their iOS devices too. On the initial installation, we enabled Open Directory, although I'm not sure that it's required, and we have no plans re using it to manage network logins etc aside from existing calendaring.
    I'm working through a migration from a Lion Server.app install to Mavericks, and due to some data corruption issues, we'll probably just rebuild the server and reimport the users calendars.
    On my existing Lion Server installation, I can still use workgroup manager to assign multiple email addresses to calendar users, so that when a user invites another user to a calendar event using any of their email addresses (we have several variations), the invitation still gets pushed to the correct calendar user.
    On Mavericks, without installing Open Directory, it seems I can't do this (I've downloaded Workgroup Manager for Mavericks, but it obviously can't connect to a local open directory). If Open Directory is optional, I'd rather not install it, to avoid overhead and complexity, but I still need a way to manage these multiple email addresses (aliases doesn't cut it).
    Any ideas / suggestions?
    Thanks,
    D

    For Calendar server to send actual email invitations to an attendee, two things must happen:
    First, you need to configure Server.app > Calendar > Enable invitations by email.  Enabling that will bring up a wizard dialog that will step you through the IMAP and SMTP account settings.  The default values in that wizard will tell Calendar server to use the local Mail server (which you then would have to configure to use the appropriate SMTP relay, etc.).  Or you can change the wizard settings to refer to an external IMAP and SMTP server.  It is wise to use a dedicated IMAP account for Calendar server's use -- don't go using someone's personal IMAP account because there might be some "undesirable interactions", let's say.  If you need help configuring this for, say, a Gmail account, I can help with that.
    Second, the email address for the attendee must *not* be known to Calendar server, i.e. it should *not* be in the Directory.  As you probably found out, if Calendar server sees that the attendee has an email address that is in the Directory, the attendee is considered to be "local" and the invitation will be delivered directly to the attendee's calendar client.  If you simply leave those other email variations out of the Directory, Calendar server will consider that attendee "remote" and will send an actual email with a special attachment that calendar clients can understand. 
    Hope that helps.

  • Read text for multiple entries(eg: for multiple customers) in XD03

    Hello all,
                       I have some (50) customer numbers (XD03) for which i need to find out whether any text is maintained or not.
    We can read the text using FM READ_TEXT, by passing Text ID, Name , object..etc.
    But the problem is we can just read one by one at a time for each coustomer
    Without writing a custom program is there any way to find the text for all the customers or for mutpliple entries.?
    do we have any FM where in we can pass multiple text names  ...and then we should get all the text assigned to it.
      Please let me know. Thanks in advance.

    Hi alll,
                  I am sorry, the requirement is just to know whether the text is maintained or not.
    (not to read the text)
    There are two ways to find:
    --> STXH table will give the result only if it has the text .
    -->There  is a standard report name is RVTEXTE...
       We have to give the values as below
    Text object: KNA1 (CUSOTMER)
    Text type  : *
    Text lan    : *  (or EN)
    Text name  : * or ( 352*) like this.
    I think we all are in the same page......
    Also I agree that we have to use FM REAd_TEXT to read the text...through programitically by loop endloop.
    Thanks for everyone for your time and response
    Thanks Rob for giving an idea to find the standard report...........

  • Creating process for multiple Date fields for update or insert in APEX

    hello there,
    could someone please help me?
    i have a form on Apex based on view that is based on three tables and updating and inserting ok using trigger instead of.
    i have a problem now as in my form i have around 75 fileds (items) incuding 30 or more date fields which could be populated or left blank or update later.
    so for each date field i have two boxs; one for date, input as dd/mm/yyyy (text field) and second for time, input as 23:45. All dates will be insert or update manually by user. so as i mentioned not all date fields could be poulated at one stage.
    so i have created some process and validations and all of them work fine but i came accross if date left blank then (:) giving me problem so i have done following further process for each date field. In real table all the date fields have data type date.
    declare
    v_my_var date; -- for first date field
    str_dy VARCHAR2(10);
    dt_indx date;
    str_tm VARCHAR2(20);
    tm_indx date;
    begin
    str_dy := :p4_first_date
    str_tm := str_dy||' '||substr(:p8_first_date_hh,1,2)||':'||substr(:p8_first_date_HH,4,2);
    dt_indx := to_date(str_tm,'DD/MM/YYYY HH24:MI');
    IF str_dy is not null then
    v_my_var :=dt_indx;
    ELSE
    v_my_var := NULL;
    END IF;
    update table 1 set my_date = v_my_var where d_id= :p4_d_id;
    end;
    above code work fine but one date field of course therefore i have to do same code for each date field with changes and initialise variable again and again for each field.
    so i like to ask is there any easy way that is more professional. i was thinking about the procedure and using collection or similar but honestly not much experience on that so could some one please help me?
    I will be very thankful.
    KRgds

    Hi,
    You can do the needful by re-using the code if you can give the item names as P8_DATE1, P8_DATE_hh1, P8_DATE2, P8_DATEhh2 etc..So your item name just differs by a sequence.
    Now you write function which will return desired date value taking above items as input. Pass item names to this function, get session state using APEX_UTIL.GET_SESSION_STATE('item_name') API.
    Now modify you code as
    FOR i IN 1..30
    LOOP
    v_date_array[i] = f_get_date('P8_DATE'||i, 'P8_DATEhh'||i);
    END LOOP;
    ....Now you have all date valus in array. Just write one update as follows
    UPDATE  TABLE1
    SET date1 = my_date_array[1], date2 = my_date_array[2]..
    WHERE ....Hope it helps :)
    Cheers,
    Hari

  • Single docuent for multiple  return deliverys for a PO

    Dear all
    Is there a possibity to combine 2 or 3 GR documents in a single Return delivery  MIGO transaction?  Currently i have a scenario where-in the vendor deliveries on 3  separate dates( for the same PO) all are rejected and i want to combine the 3 rejections in one return document .
    Is it possible
    Thanks
    Sam

    Hi,
    It is not possible in Return Delivery - 122 Movement Type, rather you can check the option of creating a Return PO for that particular PO & do MIGO - 161 Movement .
    Pl. check
    Regards,
    Vikas

Maybe you are looking for