ACE HTTP requests
Hello,
I currently have a Serverfarm consisting of 6 Servers Load Balancing HTTP requests (Port 80) from the VIP to the Real Servers.
I now have a requirement to load balance another application on the same Real Servers using the same VIP however the URL to be used is using Port 1880 within HTTP.
http://10.10.90.1:1880/Service.asmx
Any advice on how to configure this on the ACE would be appreciated.
thanks
Ian.
Ian,
Maybe something like this:
policy-map multi-match int56
class VIP_Plumtree_1880
loadbalance vip inservice
loadbalance policy VIP_WEB-l7slb_1880
loadbalance vip icmp-reply
class-map match-all VIP_WEB_1880
2 match virtual-address 10.10.90.1 tcp eq 1880
class-map type http loadbalance match-all MATCH-URL-1880
2 match http url /Service.asmx.*
sticky ip-netmask 255.255.255.255 address source Sticky_Group_WEB_1880
serverfarm SF_WEB_1880
replicate sticky
policy-map type loadbalance first-match VIP_WEB-l7slb_1880
class MATCH-URL-1880
sticky-serverfarm Sticky_Group_WEB_1880
class class-default
sticky-serverfarm Sticky_Group_WEB_1880
serverfarm host SF_WEB_1880
description WEB1&2
rserver RS_WEB1 1880
conn-limit max 4000000 min 4000000
inservice
rserver RS_WEB2 1880
conn-limit max 4000000 min 4000000
inservice
Jorge
Similar Messages
-
ACE 4710 and mangled HTTP requests
After replacing a Cisco CSS/SSL Accelorator and PIX firewall with an ACE 4710 to do load balancing and SSL encryption behind an ASA firewall we started seeing mangled HTTP requests in the Apache access logs for the servers in the server farm. Here is one example:
XX.XX.XXX.XXX - - [21/Oct/2012:01:42:12 -0500] "heckoutFlag=true&verifyPassword=false&newsletter=false&emailaddress=&email2=&pass1=&pass2=&username=POST /register/LServlet HTTP/1.1" 501 3322 "https://www.ourwebsite.com/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
Rather than appearing just after the timestamp, the "POST /register/LServlet" is tacked on to header information that shouldn't even appear in the log. Also the first letter in that header information is always missing (heckoutFlag instead of checkoutFlag in this example).
The mangled request always shows up as a 501 HTTP error and shows up late in the Apache access logs (timestamp is out of chronogical order) and always appears with several duplicate POSTs:
XX.XX.XXX.XXX - - [21/Oct/2012:01:42:23 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XXX.XXX - - [21/Oct/2012:01:44:12 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XX.XXX - - [21/Oct/2012:01:42:12 -0500] "heckoutFlag=true&verifyPassword=false&newsletter=false&emailaddress=&email2=&pass1=&pass2=&username=POST /register/LServlet HTTP/1.1" 501 3322 "https://www.ourwebsite.com/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
XX.XX.XXX.XXX - - [21/Oct/2012:01:44:12 -0500] "POST /register/LServlet HTTP/1.1" 200 8537 "https://www.ourwebsite/register/CServlet" "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)"
This is occurring for several different URLs and not just the one above and for multiple web browsers.
The ACE load balances to servers running Tomcat 7 with Apache HTTP server v. 2.2.14.
A recent ACE software upgrade to A5(2.1) has not fixed the problem.
Has anyone seen this before?
Thanks for any insight you can provide.
-KariHi Kari,
Do you have a sample of the configuration which you got with the CSS?
What is the current configuration which you got on the ACE?
Can you shows this output: # show stats http?
Jorge -
ACE - HTTPS CLASS MAP CONFIGURATION
Hi,
We have a secured web site (HTTPS) currently fronted by Cisco ACE 4170, running version A5(1.2). We are trying to use the http class map to manipulate the traffic flow in the following manner:
https://abc.com/ABC/* -> serverfarm#1
https://abc.com/* -> serverfarm#2 (Default)
Tecnically this should not be difficult and below is a sample of our configuration. We have similar configuration working on our non-secured web site (HTTP) However for the secure web site, the https request https://abc.com/ABC/xxx is continued being routed to serverfarm#2 instead of serverfarm#1 which is very frustrating.
We can easily get this working on my F5 LTM within 5 minutes but this Cisco ACE continue to frustrate me...Appreciate if any expert on Cisco ACE can help to advise on our configuration.. Thanks.
=========================================================
serverfarm host serverfarm#1
predictor leastconns
probe https_probe
rserver rs_server#1
inservice
rserver rs_server#2
inservice
serverfarm host serverfarm#2
predictor leastconns
probe https_probe
rserver rs_server#3
inservice
rserver rs_server#4
inservice
sticky http-cookie STICKY_HTTPS_serverfarm#1
cookie insert browser-expire
timeout 15
replicate sticky
serverfarm serverfarm#1
sticky http-cookie STICKY_HTTPS_serverfarm#2
cookie insert browser-expire
timeout 15
replicate sticky
serverfarm serverfarm#2
class-map type http loadbalance match-any class-map-serverfarm#1
2 match http url /ABC/.*
policy-map type loadbalance first-match vs_serverfarm_https
class class-map-serverfarm#1
sticky-serverfarm STICKY_HTTPS_serverfarm#1
insert-http x-forward header-value "%is"
ssl-proxy client ssl_serverfarm
class class-default
sticky-serverfarm STICKY_HTTPS_serverfarm#2
insert-http x-forward header-value "%is"
ssl-proxy client ssl_serverfarm
=========================================================Kanwaljeet,
Yes, we are using ACE for SSL termination i.e. front end is https and back-end is also https.
We are doing end-to-end encryption as our IT security and audit wanted end-to-end encryption between the client and servers. ACE should be able to look at the HTTP header at the front end since the client SSL session is terminate on the ACE.
Below is an extract of the configuration, I've leave out the remaining configuration which is not required.
=========================================================
serverfarm host serverfarm#1
predictor leastconns
probe https_probe
rserver rs_server#1
inservice
rserver rs_server#2
inservice
serverfarm host serverfarm#2
predictor leastconns
probe https_probe
rserver rs_server#3
inservice
rserver rs_server#4
inservice
sticky http-cookie STICKY_HTTPS_serverfarm#1
cookie insert browser-expire
timeout 15
replicate sticky
serverfarm serverfarm#1
sticky http-cookie STICKY_HTTPS_serverfarm#2
cookie insert browser-expire
timeout 15
replicate sticky
serverfarm serverfarm#2
class-map match-all vs_serverfarm
2 match virtual-address 10.178.50.140 tcp eq https
class-map type http loadbalance match-any class-map-serverfarm#1
2 match http url /ABC/.*
policy-map type loadbalance first-match vs_serverfarm_https
class class-map-serverfarm#1
sticky-serverfarm STICKY_HTTPS_serverfarm#1
insert-http x-forward header-value "%is"
ssl-proxy client ssl_serverfarm
class class-default
sticky-serverfarm STICKY_HTTPS_serverfarm#2
insert-http x-forward header-value "%is"
ssl-proxy client ssl_serverfarm
policy-map multi-match PRODWEB_POLICY
class vs_serverfarm
loadbalance vip inservice
loadbalance policy vs_serverfarm_https
loadbalance vip icmp-reply active
nat dynamic 100 vlan 100
ssl-proxy server ssl_serverfarm
========================================================= -
Missing option to change HTTP request method on iView level
Dear all,
I am trying to implement an iView using the ApplicationIntegrator. Unfortunately I am getting the error message "Request Method POST is not allowed". I found this nice weblog where you have the option on the iView level to change the HTTP request method to "GET". Unfortunately I do not have this parameter.
I am on EP6.0 SP 9.
I really appreciate your help and will reward points.
Thanks,
JensI'm not sure I fully follow what the problem is, or I'm misreading the issue.
Just to be clear, you are in Active Directory Domains & Trusts console, you did a click on "Active Directory Domains and Trusts," and then you are saying on the left pane you are not seeing the "Raise Forest Functional Level"
option, such as the following screenshot shows?
I assume there is currently only one domain in the forest.
Was there at any time another domain that was removed, such as a child domain or an additional domain tree, there was removed?
What's the Schema version? To find it, run this without the quotes:
"dsquery * cn=schema,cn=configuration,dc=domainname,dc=local -scope base -attr objectVersion"
Schema Version Matrix:
============================
Version 13 = Windows Server 2000
Version 30 = Windows Server 2003 RTM, Windows Server 2003 with Service Pack 1, Windows Server 2003 with Service Pack 2
Version 31 = Windows Server 2003 R2
Version 44 = Windows Server 2008
Version 47 = Windows Server 2008 R2
Version 56 = Windows Server 2012 RTM
Version 69 = Windows Server 2012 R2
Late Edit:
See the following link for a similar discussion:
Unable to raise forest functional level
https://social.technet.microsoft.com/Forums/windowsserver/en-US/1d777261-ea53-4301-9541-3ea037245986/unable-to-raise-forest-functional-level?forum=winserverDS
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
ACE HTTP Probe with regex
Hi,
I'm trying to setup a HTTP probe with expected string rather then a code (config below). I do a GET for the page then a search for a string in the response however it's not working, as probe appears as failed.
I've tested the connection to the server by using telneting and then looking at the page displayed to make sure the string I want to match is in the response.
probe http HTTP-PROBE
port 43050
interval 30
passdetect interval 30
passdetect count 1
request method get url /action=help
open 43050
expect regex action=help
Q. Is there anything wrong with this configuration and what I'm trying to achive?
Thanks,
PriteshUse "expect status" under probe config. expect regex doesnt work if expect status is not configured.
expect regex work flawlessly with static pages. It doesnt work all the time with dynamic pages.
Specially if "content-length" header is missing from Server response.
Hope it helps
Syed Iftekhar Ahmed -
What is the syntax for rewriting the destination port for a HTTP request?
For Example: Rewriting "http://www.test123.com" TO "http://www.test123.com:81"
Thanks!Hi,
The simple solution is to specify port at rserver level to the desired port. In your case it should be like this :
host1/Admin(config-sfarm-host)# rserver SERVER1 81
this is from the documentation which explain the same:
Associating a Real Server with a Server Farm
You can associate one or more real servers with a server farm and enter real-server server-farm configuration mode by using the rserver command in either server farm host or server farm redirect configuration mode. The real server must already exist. For information about configuring a real server, see the "Configuring Real Servers" section. You can configure a maximum of 16,384 real servers in a server farm. The syntax of this command is as follows:
rserver name [port]
The arguments are as follows:
•name—Unique identifier of an existing real server. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.
•port—(Optional) Port number used for the real server port address translation (PAT). Enter an integer from 1 to 65535.
If you choose not to assign a port number for the real server association with the server farm, the default behavior by the ACE is to automatically assign the same destination port that was used by the inbound connection to the outbound server connection. For example, if the incoming connection to the ACE is a secure client HTTPS connection, the connection is typically made on port 443. If you do not assign a port number to the real server, the ACE will automatically use port 443 to connect to the server, which results in the ACE making a clear-text HTTP connection over port 443. In this case, you would typically define an outbound destination port of 80, 81, or 8080 for the backend server connection.
For example, to identify real server SERVER1 and specify port 80 for the outgoing connection, enter:
host1/Admin(config-sfarm-host)# rserver SERVER1 80
host1/Admin(config-sfarm-host-rs)#
Hope that helps.
regards,
Ajay Kumar -
ACE http/https redirect or rewrite
Greetings,
We have a setup that requires ACE http/https redirection or rewrite.
A client connects to a secured Web portal which has its ssl termination on the ACE.
The web portal will request from the client a redirection to another application. As the portal is unaware that the incoming client https request was terminated on the ACE,
the client receives the redirect request for an unsecured http URL rather than for the secured https URL.
In this case what would be best to use? ACE "rewrite" or "redirect"?
Will the following example config for ACE "redirect" be sufficent to implement this?
ssl-proxy service ssl-App-443-81
key app1.test.com.key
cert app1.test.com.cert
rserver redirect App-secure-redirect
webhost-redirection https://app1.test.com/Go/
inservice
serverfarm redirect App-secure-redirect-sf
rserver App-secure-redirect
inservice
serverfarm host App-81-sf
probe TCP81
rserver proxy1 81
inservice
rserver proxy2 81
inservice
parameter-map type http http_param_map
header modify per-request
sticky http-cookie App-cookie App-sticky
cookie insert
replicate sticky
serverfarm App-81-sf
class-map match-any App-443-81-cm
2 match virtual-address 10.10.10.112 tcp eq https
class-map match-any App-81-cm
2 match virtual-address 10.10.10.112 tcp eq 81
class-map type http loadbalance App-secure-redirect-cm
match http url http://app1.test.com:81/Go/
policy-map type loadbalance http first-match App-rewrite-pm
class App-secure-redirect-cm
serverfarm App-secure-redirect-sf
policy-map type loadbalance http first-match App-sticky-443-81-pm
class class-default
sticky-serverfarm App-sticky
policy-map multi-match policy-inbound
class App-81-cm
loadbalance vip inservice
loadbalance policy App-rewrite-pm
loadbalance vip icmp-reply active
loadbalance vip advertise active
class App-443-81-cm
loadbalance vip inservice
loadbalance policy App-sticky-443-81-pm
loadbalance vip icmp-reply active
loadbalance vip advertise active
appl-parameter http advanced-options http_param_map
ssl-proxy server ssl-App-443-81If you are offloading www.yoursite.com on ACE and on the backend
real servers are not ssl aware (sends URL with http://) then with
following sample config you can instruct ACE to rewrite such urls (http->https)
class-map match-all VIP-443
match virtual-address x.x.x.x tcp eq https
action-list type modify http HTTP2HTTPS-REWRITE
ssl url rewrite location www\.yoursite\.* sslport 443 clearport 80
policy-map type loadbalance first-match YOUR-POLICY
class class-default
serverfarm YOUR-SFARM
action HTTP2HTTPS-REWRITE
class VIP-443
loadbalance vip inservice
loadbalance policy YOUR-POLICY
loadbalance vip icmp-reply active
ssl-proxy server YOUR-SSL-SERVICE
You need Ace2.x+ on Ace module & 3.x+ on 4710 appliance for this feature.
Syed Iftekhar Ahmed -
Hi,
How to configure the ACE to redirect a https request to different url.
For example
Clients requesting https://www.mycompany.com shall be redirected to https://www1.mycompany.com.
Please let me know.Thanks in AdvanceHi Gilles,
I am having the certificate and the key.
Please check the config and confirm whether this looks fine or not.
I am using GSS to resolve www.mycompany.com and www1.mycompany.com
probe http Server1
interval 15
passdetect interval 60
request method head url /keepAlive.html
expect status 200 202
open 10
parameter-map type ssl PARAMMAP_SSL_TERMINATION
cipher RSA_WITH_3DES_EDE_CBC_SHA
cipher RSA_WITH_AES_128_CBC_SHA priority 2
cipher RSA_WITH_AES_256_CBC_SHA priority 3
rserver redirect HTTPS-REDIRECT
conn-limit max 4000000 min 4000000
webhost-redirection https://www1.mycompany.com.au 301
inservice
serverfarm host SFARM_HTTPS
rserver Server1_http 80
inservice
serverfarm redirect https-redirect
rserver HTTPS-REDIRECT
inservice
ssl-proxy service SSL_PSERVICE
key MYKEY.PEM
cert ACE-SP2.CER
ssl advanced-options PARAMMAP_SSL_TERMINATION
class-map type http loadbalance match-any HTTPS1
2 match http header Host header-value "www[.]mycompany[.]com"
class-map type http loadbalance match-any HTTPS2
2 match http header Host header-value "www1[.]mycompany[.]com"
policy-map type loadbalance first-match HTTPS
class HTTPS1
serverfarm https-redirect
class HTTP2
serverfarm SFARM_HTTPS
class class-default
serverfarm SFARM_HTTPS
policy-map multi-match HTTPS-PM
class HTTPS-RED
loadbalance vip inservice
loadbalance policy HTTPS
loadbalance vip icmp-reply active
ssl-proxy server SSL_PSERVICE
Also let me know know if there is any another way to configure the redirection other than matching host header.
Thanks in Advance -
Null values in Weblogic 7 HTTP Request Parameters
It appears weblogic 7 handles nulls passed from the request object
differently than the previous versions. In my jsp's, if a parameter
was not passed, I used to get a java null value:
String s = request.getParameter("something_not_passed");
if(s == null) {
//do stuff
Now, weblogic seems to return the string literal "null" so I would
have to use:
if(s.equals("null")) {
//do stuff
Is this a bug or am I missing something?
Thanks,
Paul
HI, Thanks for the reply. I am using getString() to fetch values.
DO u think its due to driver incompatibility?? Because, BEA claims WL7.0 supports
Oracle 8.1.7 onwards!
Thanks,
Yogesh
Joseph Weinstein <[email protected]> wrote:
>
>
Yogesh wrote:
Hi, I have ported my web application from weblogic 5.1 to weblogic 7.Set up is weblogic
7 with database Oracle 8.1.6 and i am using OCI driver for DB connectionpool. I
am facing some problems like, the values that were retrieved as blanksin weblogic
5.1 are being retrieved as null(string literal value) in 7. The same thinghappens
when parameters were passed through HTTP request object. Any idea aboutthis?
Thanks,
YogeshHi. This sounds like a driver bug. Let's isolate it to a simple standalone
program
that uses our driver to select null data. How are you asking for the object?
GetString(),
GetObject()?
Joe -
Problem in sending HTTP request to the server.
Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
<echo>basedir ${basedir}</echo>
<property environment="env"/>
<echo>current folder ${basedir}</echo>
<property file="${basedir}/build.properties"/>
<taskdef resource="net/sf/antcontrib/antlib.xml">
<classpath>
<pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
</classpath>
</taskdef>
<target name="init">
<tstamp>
<format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
</tstamp>
<property name="build.log.dir" location="${basedir}/buildlogs"/>
<mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
<record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
<echo message="Build logged to ${build.log.filename}"/>
</target>
<target name="deployAll" depends="init">
<echo>Deploy for environment ${deployment.plan.environment}</echo>
<antcall target="deployAllComposites"/>
</target>
<!-- Following Actions are performed for Composite files in Managed Server - Deploy,Redeploy -->
<target name="deployAllComposites" depends="init">
<foreach target="deployComposites" param="Files">
<fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
</foreach>
</target>
<target name="deployComposites" depends="init">
<basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
<if>
<equals arg1="${deployAction}" arg2="deploy" />
<then>
<echo message="Deploying composites in Managed server........." />
<ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
<property name="serverURL" value="${serverURL}"/>
<property name="user" value="${user}"/>
<property name="password" value="${password}"/>
<property name="overwrite" value="false"/>
<property name="forceDefault" value="${forceDefault}"/>
<property name="sarLocation" value="${sarLocation}/${basename}"/>
</ant>
</then>
<else>
<echo message="ReDeploying composites in Managed server........." />
<ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
<property name="serverURL" value="${serverURL}"/>
<property name="user" value="${user}"/>
<property name="password" value="${password}"/>
<property name="overwrite" value="true"/>
<property name="forceDefault" value="${forceDefault}"/>
<property name="sarLocation" value="${sarLocation}/${basename}"/>
</ant>
</else>
</if>
</target>
</project>
please help....Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal -
How to send a http-request from abap?
I want to send a xml file through a http-request ,what should i do?
Welcome to SDN
you can use cl_http_client class to do that. search the abap general forum with key word cl_http_client and you will find lot of examples.
Regards
Raja -
How to construct a faces request from a http request?
I wonder how FacesServlet.service determines whether it should be calling LifecycleImpl.execute in oppose to calling LifecycleImpl.render?
Basically, I'm trying to construct a http request that would go through the decode method of my UIComponent. However, it seems that my request has always been treated as a non-faces request, where it goes to the render face directly.
Does anyone know how do I need to construct my http request so that it'll be recgonized as a faces request?
Anyone knows where i can download the source code for FacesServlet?
thanks!Sorry, are you saying that FacesServlet ALWAYS call execute before render even if it's the first request?
What I experienced is that for the first request, execute isn't called, and it goes directly to render.
And if I use the html form submit on the 2nd request, it does go to execute, then render.
However, if i construct another http request, it'll act like a first request, where it doesn't go through the execute, but striaght to render.
This is what I set in web.xml:
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup> 1 </load-on-startup>
</servlet>
<!-- Faces Servlet Mapping -->
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/faces/*</url-pattern>
</servlet-mapping>
I call my jsp using http://server:8080/faces/my.jsp, and I'm using tomcat 5. Any help would be appreciated. -
How to pass a HTTP request from a simple java class
Is it possible to pass an HTTP request from a simple java class.if yes how?
Is it possible to pass an HTTP request from a simple
java class.if yes how?If you're talking about creating a HttpRequest object and passing it to a servlet, that would be a red flag to me that your design is flawed. You shouldn't have to do that - the application server (Tomcat, Weblogic, etc) should be the only thing that has to worry about creating that kind of object and passing it to you. -
How to make a http request from a pl/sql procedure(URGENT)
I need to make a http request from a pl/sql procedure, can any one tell me which built-in package and which procedure/function we serve my need?
Thanks in advance.
Ram Prasad.You should use UTL_HTTP package, but before it install the JVM into DB
-
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests
Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
JazHi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz
Maybe you are looking for
-
Dashboard autorun of BI publisher report
We have a BI publisher report which is set NOT to auto run in BI Publisher. This report is embeded in OBIEE dashboard. Problem: Whenever user navigates to the dashboard, it autoruns with default settings. Is there a to stop the auto in the dashboard
-
Hi, I am trying to write a simple file using an objectStream. When I write the file, it add this to the begining of the file: \254\355^Et^E and when I try to write one or more things, it puts this inbetween them: t^G Does anyone know what is going on
-
How can I get rid of the mighty magoo textlinks add-on?
An add-on was added and now I can't get rid of it. It's called mighty magoo textlinks.
-
5.1 (pseudo) mix from HDV stereo audio
I have done lots of research on this....and the folks in the encore forum have helped me figure out how to render my 5.1 mix to a Blu-Ray disc. However now I have an editing issue.... I used the Adobe tutorial on how to setup a 5.1 sequence....I setu
-
Report Server has only ApShell
Hi everyone. I installed SAP BPC MS 7.5 normally (windows server 2008 R2), no error occurred. I created new appsets with no problems apparently. But when I tested the SQL Server Reporting Services it is only showing the AppSet: ApShell. I created new