ACE match http url with post data

I need to make a layer-7 load balancing decision at the ACE module based on a URL string that includes form POST data. It is important that the balancing decision include and parse the part of the URL after the question mark. This doesn't seem to work with the "match http url" config on the ACE. My interpretation is that the ACE does not consider the POST data to be part of the URL string, and therefore does not include it in the regular expression matching. Am I missing something here, or have I run into a limitation of the ACE module?
class-map type http loadbalance match-any L7__URL_MATCH_CLASS
2 match http url index.php\?field=content.*

Hi
The '?' has a special meaning in the URL. It means the end of the main URL and the beginning of the URL query.
Its not possible to match ? in the url.
One option could be using secondary cookie matching in ACE.
class-map type http loadbalance match-any xyz
2 match http cookie secondary field cookie-value content
Thanks
Syed

Similar Messages

ACE Appliance HTTP Probe with "POST" query

Does the ACE support HTTP Probe with a "POST" query?
Thanks
Joe

Hi Joe,
The ACE only supports GET and HEAD
Here is the documentation related to this:
http://www.cisco.com/en/US/customer/docs/interfaces_modules/services_modules/ace/vA5_1_0/configuration/slb/guide/probe.html#wp1031485
Cesar R

Calling external URL with POST data

Hi:
In my action bean I have to call and external URL (outside my domain), and along with this URL 'POST' data. I have tried the following code:
try {
FacesContext lclFC = FacesContext.getCurrentInstance().getFacesContext();
lclFC.getExternalContext().getRequestMap().put("x_loc_zip","94804");
lclFC.getExternalContext().redirect("http://www.mysite.com/personals/search/search.html");
} catch (IOException e) {
throw new FacesException(e);
finally {
lclFC.responseComplete();
This works fine in calling the other URL, but no data is sent thru the post protocol. I have no control to the site I am calling....
I have also tried
ExternalContext ectx = FacesContext.getInstance().getFacesContext().getExternalContext();
HttpServletRequest request = (HttpServletRequest) ectx.getRequest();
HttpServletResponse response = (HttpServletResponse) ectx.getResponse();
RequestDispatcher dispatcher = request.getRequestDispatcher("http://www.mysite.com/personals/search/search.html");
dispatcher.forward(request, response);
But this tends to put a "/" at the front of the called URL. Can someone please recoomed the coorect way to call a URL from yr action bean and sending it data thru post protocol. I also wish that this new URL should now be displayed within the browser. This is urgent, yr quick reply is appreciated

Myfaces sandbox form gives the ability to change its action url and port. Look here:
http://myfaces.apache.org/sandbox/form.html

Cisco ACE - Exempt HTTP URL from SSL Offloading

Hi,
I have a cisco ACE module A2 (3.6). I am offloading url www.abc.com on cisco ACE. HTTP redirection to https is working & over https I am able to browse website perfectly. real servers are redirecting some pages over http. Due to page redirection from webserver I have to exempt one URL (http://www.abc.com/modules/docs/abc.aspx) from ssl offloading. It is possible or as a work around i have to rewrite complete url www.abc.com as ssl port.
Your inputs highly appreciated.
Regards,

Hi Masif,
In case you have not gotten assistance with this one, you just need to specify the specific URL and match it on top of the loadbalance policy that is already doing the redirection.
class-map type http loadbalance match-any No-Redirect
2 match http url /docs/abc.aspx
policy-map type loadbalance first-match ABC
class No-Redirect
serverfarm HTTP-Servers
class class-default
serverfarm Redirect
Hope this helps.
Pablo

How to changes baseline date in miro with Posting date

Please tell me the procedure to change the baseline date in miro with posting date (EKBE-BUdat) on basis of Purchase order No (EBELN) .
I tried it by using user exit :-EXIT_SAPLKONT_011 Enhancement : LMR1M002 but got stuck somewhere .Please tell me how to work on this .

hey guys my problem is solved by using a badi " MRM_PAYMENT_TERMS" .In method "PAYMENT_TERMS_SET" writing the code .

Exchange rate not updated with posting date, translation date updated

Hi,
I have the follwoing problem in F110. Currency documents are posted with exchange date of the docuemnt entry date. Translation date is updated with Posting date, just exchange rate is not updated. the systems calculates according entry date. Why entry date is one day before the date of posting, I cannot understand. The system takes the exchage date from entry date, which is one day before (docuemnt, posting and translation date)
Thank you,
Desimira

Hello,
This means, that the exhange rate is missing your local currency vs USD in the system. Your Business Partner or any of items you are adding to the invoice is using USD (price list or customer is in USD).
My tip is some of the items has USD price set or USD Purchase price used.
DO the following:
Check the POsting date of your invoice
Go to Administration -> Exhnage rate, and locate the posting date and USD from the matrix, and enter the rate.
Post your invoice.
it will work
Regards
János.

Inventory: Movement after count with post date before the count date.

Hi,
We have stock movements all the days of the week.
We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
Thanks in advance for your support!!

SAP takes the book inventory in the moment you enter the count.
Best you set block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
This is not a good way if you still have movements after inventory document creation and actual count.
You have to make sure - organisational wise, outside SAP - that all movements that happened before inventory count are posted before you start entering the count. There is nothing in SAP that can help you in this case.

How to Record HTTP Requests and POST data

Hai all..
Can anyone help me to solve this issue..
How to Record HTTP Requests and POST data by using java..
regards
Ranjith Nair

You should read about TCP and splitting data stream into packets and learn how to understand packet header to assemble stream from packets.
Actually there are few different stages:
1. detect handshake to start new empty stream within your code;
2. detect subsequent packets and assemble stream (there are counters within packet header and they will help).
After creating start of TCP stream (usually 1KB is enough) you'll be able to detect is it HTTP request/header or no and start logging or ignoring packets for this connection.

ABAP WebDynpro: Call a URL with POST-parameters?

Hi all,
I want to call a URL from an ABAP WD method with additional data. I know that this is simply possible via the Window Manager, passing a URL. Adding additional parameters inside the URL is of course also possible using "&" and "?" separators.
Is it somehow possible to call such a URL out of WebDynpro with additional POST data (e.g. an XML datastream)?
Best regards.
Alexander

Hi Alex.,
As u said that u know how to call URL and pass parameters using window manager., and i am not sure about XML data stream.!!
I can advise u to post ur thread here: [Web Dynpro ABAP Forum|Web Dynpro ABAP;
U will get some useful inputs..
Thanks & Regards
Kiran

Accessing Java webservice (XML over http) via WCF or HTTP adapter with content-type and authorization HTTP headers with POST method

Hi Team,
I need to access Java web service which is simple service and accepts and returns XML over HTTP. No credentials are needed to access the service. We need to pass following two HTTP headers (Content-Type and Authorization) along with XML request message:
<GetStatus> message is being constructed in the orchestration and URI is constant to access.
Which adapter shall I use to get the response back? I tried using WCF-WSHttp with Security Mode = Transport, and different options of client credential types but every time, error returned stating:
System.Net.WebException:
The HTTP request is unauthorized with client authentication scheme 'Basic'. The
authentication header received from the server was 'Basic realm='.
Authentication failed for principal Basic. Message payload is of type:
String
In Fiddler, request looks line following
POST <https://URL/GetServiceReopnse HTTP/1.1
Content-Type: application/xml
Authorization: Basic cmVmU3RhdHN2Y19kgeRfsdfs=
Host: <Server name>
<GetStatus XMLNS="http://server.com/.....">
<OrgId>232323</OrgId>
<HubId>3232342323</HubId>
</GetStatus>
MMK-007

First, you should not use the HTTP Adapter because it's been deprecated and replaced by WCF.
Start with the WCF-Custom Adapter and select the customBinding.
You should start with the textMessageEncoder and httpTransport and go from there.

RE:Need data vendor no with posting date

Hi All,
one of my user requires the data of the GR report with vendor no and posting date data to analysis the batch job.kindly anyone can help me from were i can fletch the data i had tried in MKpf i can get the posting date data but when comes to vendor i can't able to get the data of the GR done for the particular vendor on the particular date.kindly help me out.
Thanks in advance.

HI,
Why you are not using MB51 report ?
Go to MB51
Here enter Vendor ,Movement type 101 ,Posting date ( Plant ,material if you want )
You will get all the desired data
Edited by: redriver on Dec 22, 2011 12:12 PM

Issue with Posting Date in F.05 - Foreign Currency Revaluation

Hi All,
We have a problem with the US-GAAP Foreign currency revaluation run which we're doing every month.
Although the posting date is entered correctly (for this month as 30.09.2011), the postings that are created have the posting date of 31.07.2011. But the reversal date is right (01.10.2011).
Could you please explain why wrong date is appearing.
Thanks IN Advance
Regards,
Payal Saxena

Hi,
Have you scheduled any batch job to carry out the Foreign Currency Valuation? If yes, then check the variant which has been created for the program. There the posting date might have been entered as 31.07.2011. Dynamic date calculation must be maintained for the posting date.
Thanks,
Aman

"https" url with URLConnection

If I use URLConnection to connect to a servlet with a https url, and supposed I have the required CA public key loaded in my keystore, would that turn on ssl connection?
Thanks in advance.
=yu

after more reading... yes, it will work (Notice that for previous version of JSK1.4.2, the protocol handler should be set correctly), the URL/URLStreamHandler class will do the runtime binding for a specific protocol.
-yu

Period-End Closing with posting date

Hi gurus,
Tell me how to fix posting date when period-end closing. Where I can fix, assign ... Now our system, it's automatic.

Hi Andy,
Im using 2004, in 2004 you can not change the date that it carries the values over to. I highly doubt you'll be able in 2005. I'm taking a guess.....but the reason you want to do this is because the figures don't look right when you run the financial reports....hey? Before you execute financial reports tick the selection box "Add closing balances" i9n the selection window. Im assuming they still have this tick box in 2005.
Hope this helps.

Help with POST data if multiple selections are chosen

I've created a form with a menu (list) that includes all 50
states. I'm using the POST option, along with PHP, to process the
form data, which will be emailed to me. The list-menu looks like
this:
http://askdave.info/help/states_menu.gif
and I have "Allow Multiple Selections" checked in the Property
Inspector.
If the user chooses multiple states, I want
EACH of those states to be listed in the email that I
receive. Right now, if I check multiple states, I only get
the very last state that's selected. For example, here's the
email I get after I check 5 different states.
http://askdave.info/help/formdata.gif
Problem--> In this email, only one state is listed
(Hawaii) even though I selected 5 different states. How do I get
the form data to list ALL states that are checked?
Here is what I have:
<form name="form1" method="post" action="process.php">
<input type="hidden" name="required"
value="name,phone,email,states,capital" />
And then for the menu that lists the states, I have:
<label>
<select name="states" size="7" multiple id="states">
<option>All States</option>
<option>Alabama</option>
<option>Alaska</option>
<option>Arizona</option>
<option>Arkansas</option>
and so on...
What am I missing? How do I get the PHP script to send
multiple values, if multiple values are chosen? (I'm new to PHP, so
go easy on me. I can post my code, if necessary.) Is this a PHP
issue, or do I need to add something to the HTML form?

Hi,
>>
I think DynaForm stands for Dynamic Form
>>
this makes some sense ;-) I was just wondering because there
is a pre-made script called DynaForm
here, but
it has a different "logistics" than yours.
However, both "DynaForm" versions are pretty basic, as they
just deal with non-multiple values - form fields like single line
input fields, texareas and non-multiple select´s. Your script
e.g. just loops through all existing form fields using the
"foreach" method:
//Pulls form fields & values.
foreach ($this->post as $field => $value) { // looping
through all form fields
if ( $field == 'required' ) continue;
$this->_addLine($field, $value); // here´s where the
field´s name/value consolidation happens
...and simply consolidates a field´s "value" with its
associated "name". The problem is : this method just works for
fields having just 1 value -- but any "multiple value" form fields
(e.g. your "states" select or checkbox groups which can pass
multiple values as well) actually require a separate "foreach"
treatment within the script, and this hasn´t been incorporated
here.
That said, I suggest using an other pre-made solution like
PHP
Form Mail script that´s capable to handle your multiple
values - scenario innately.

ACE match http url with post data

Similar Messages

Maybe you are looking for