ACE - x-forwarded-for equivalent for other protocols than HTTP

Hello you guys
Need your help. I have an ACE architecture based on source-nat but I want to have the real source IP info on the destination real server.
For HTTP packets I can set up x-forwarded-for, but is there a way to do the same for other TCP protocols? And, just for the fun of it, UDP also?
Best wishes

Hi,
it is designed specifically for HTTP. ACE cannot insert the same to any other protocol.
Even if you look at the commands it says :
"insert-http x-forward header-value "%is"
which itself indicate that it is desinged for HTTP. This is a process of adding a header to HTTP message.
Hope that helps.
regards,
Ajay Kumar

Similar Messages

Using other protocol than HTTP for a Nokia 7650 application

Hello,
I'm developing an java application for a Nokia 7650 that needs to use SIP over UDP.
In an emulator on the PC the communication works fine.
I'm afraid that there will be some problems when I port the application to the real device.
Can I use SIP over UDP communication on a real Nokia 7650?
thanks in advance
Best regards
Hector

I add some code example of my application. SIP uses Datagram protocol, which is supported in CLDC.
// Create a new datagram socket.
DatagramConnection dc =
(DatagramConnection)Connector.open("datagram://:5060");
System.out.println("SYSTEM, datagram server listener:" + "datagram://:5060");
while (! sipStack.toExit) {
Datagram datagram =
dc.newDatagram(MAX_DATAGRAM_SIZE);
System.out.println("SYSTEM, listening!");
dc.receive(datagram);
System.out.println("SYSTEM, packet revceived!");
// Create asynchronous message handler
// for this message
UDPMessageChannel udpMessageChannel =
new UDPMessageChannel
(datagram,sipStack);
} catch (Exception ex) {
ex.printStackTrace();

Other links than http...

Dear iWeb users,
I'd like to link a word with the following url: afp://myserver.com but iWeb refuses. Same happens with ftp://myserver.com. Only http://myserver.com works. Any idea on how to solve the problem (limitation...)?
Thank's for your help
Francois
mbp17 Mac OS X (10.4.8)

You will need to post process your pages, there are many methods to alter < a href tag from HTTP to AFP or FTP or whatever...
That said, you will need ways to control which links to be altered, and leave other links as HTTP, you don't want to change every HTTP links, right?
Example: let say you have 20 HTTP links on your page and you only want to change 2 of those to FTP and one to AFP, see what I'm getting at.
You can change HTML code using search and replace method with a third party apps (this method actually changes the HTML code, very, very static and very very quaint ).
or you can change HTML code dynamically (DHTML) with javascript, I do not have specific javascript to change HTTP to AFP or FTP, but I do have javascript to alter HTTP href to anchor links (not much different there), see this:
http://geocities.com/[email protected]/anchors_1.html
& http://geocities.com/[email protected]/anchors_2.html
the anchor links are modified on-the-fly. sorry folks, I don't do windows; you will have to get Safari or Firefox to see it.

Any good Profiler for flex applications other that than the flash builder profiler

My application is huge application I have to monitor memory and performance. I want to use some good profilers other that the one provided by FB

Hi,
I have searched for it and found some names like The Miner , MonsterDebugger , SWFWire etc..
Please have a look at following sites :
http://stackoverflow.com/questions/7558678/flex-profiler-alternative
http://www.swfwire.com/debugger
http://jpauclair.net/flashpreloadprofiler/
Thanks and Regards,
Vibhuti Gosavi | [email protected] | www.infocepts.com

Using sprite for itemRenderer what other method than set data needs override

I get the following error: 1020 Method Marked override must override another method. Complier marks the error at the start of my set data method:
code is here:
http://pastie.org/497786
any input would be welcome.
Thanks
Jed

I think Natasha said that you don't need the override on your set data() method. You shouldn't need to implement IFactory either. I think your code should look like this:
<?xml version="1.0" encoding="utf-8"?>
<mx:UIComponent
     xmlns:mx="http://www.adobe.com/2006/mxml"
     width="160"
     height="120"
     implements="mx.controls.listClasses.IListItemRenderer"
     >
     <mx:Style source="QtVideo.css"/>
     <mx:Script>
          <![CDATA[
               private var repImageSource:String = "";
               private var movieSource:String = "";
               private var _data:Object;
               public function get data():Object
                    return _data;
setting data
               public function set data(value:Object):void
                    _data = value;
                    repImageSource = value.representativeImage as String;
                    movieSource = value.source as String;
          ]]>
     </mx:Script>
     <mx:Image
          id="repImage"
          width="160"
          height="120"
          source = ""
          horizontalAlign="center"
          x="0"
          y="0"
          >
     </mx:Image>
     <mx:Button styleName="playStopStyle"
          id="playBtn"
          x="{repImage.width/2 - 22.5}"
          y="{repImage.height/2 -22.5}"
          />
</mx:UIComponent >
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

Creating a template in Pages is straight-forward as answered here previously. Is there and equivalent for iBooks Author which can start with a blank page and build up the template as required? or can one only adapt a ready made template?

Creating a template in Pages is straight-forward as answered here previously. Is there an equivalent for iBooks Author which can start with a blank page and build up the template as required? or can one only adapt a ready made template? This has proved unsatisfactory to me so far. Lines are left in etc.

There are two basic menus for fonts - one from the main menu bar and one from the toolbar. You can also bring up the font manage dialog.
I don't recommend trying to hard to force an otherwise foreign font, as it inevitably needs to be usable/supported on iOS as well, and that can get tricky w/3rd party fonts, as an example, even with the expanded font support in the latest iBA.
If you need to discuss fonts more, I suggest starting a new thread....preferably with a slightly more brief title, thanks.

IWeb protocol support for anything OTHER than http and https

I am extremely disappointed in iWeb. It doesn't even seem to be able to do very simple things.
All I want to do is to create HTML links to external pages with protocols other than "http" and "https" and it always prepends "http" to the beginning of the URL. This is really really really annoying.
Apple I hope you are paying attention. iWeb is poorly designed. You are trying to anticipate what end users want...this is a development practice right from the Microsoft Windows Developer book. I sure how the next update to iWeb works properly. I'm so upset about all this...I can't publish podcasts to the web because of all the foolishness with how you handle that, and the confusing directory name issues.
My podcast URL looks like this:
http://itpc://www.mysite.com/podcast/News/rss.xml
I tried (unsuccesfully) to manually create the podcast since the automated version created this:
itpc://www.bradyconsult.com/podcast/podcast/News/rss.xml
I'm sure I could fiddle with iWEb and get this to work, but why should I? I've already fiddled with it and simple changes to my site structure totally screw this up. Not to mention, that when it did work, it didn' t even post all my podcasts!!! It skipped the first one and the last one.
And, for those wondering, i'm not technically clueless. I have a podcast working just fine on two other sites. The appeal to iLife with iWeb and the new podcast feature of GarageBand was to bring all this together in one easy to use, nice package. But it's not nice. Garageband's update is awesome! But iWeb and it's attempts to work with the other iApps is gruesome.
I expect this garbage from Microsoft...not Apple.
Can anyone recommend a workaround (and yes, I understand I can manually edit HTML...but I was hoping for a workaround within iWeb) to create html links with support for protocols (aside from http and https) ??
It's bad enough I have to publish to a folder and then FTP to my site since apple makes that exceedingly difficult to do (I'm sure to increase .mac sales) but all this other foolishness is just bunk. I feel ripped off on my iLife '06 purchase.
Grrrrrrr......
G5 Dual 2.3 GHz Mac OS X (10.4.5)

I don't know if this helps you any, but in my humble
opinion Drake is absolutely correct. iWeb really
wasn't designed for the pro site builder; it's just
an entry level site builder. Moreover, it isn't
really geared for the professional world of internet
marketing; I think it is really more for the home
and family group who have at least one thing in
common: Macs.
I don't think it was even designed for them. I mean, you can't create an ftp: link, you can't manage multiple site files, there's no way to add "aim:" or "yahoo:" links, etc. It's not mac's they're supporting. It's .mac in particular, maybe, if that.
The art is kinda nice, but really, the grief in trying to do simple things like a basic href is just absurd. I can do these things easily in Pages. iWeb should certainly be no more difficult.
Btw, I'm here because I have the same problem - overly restrictive URL's on hyperlinks. I'll probably solve my with a trivial sed script. But even that's tough because they mangle the url. It's not easy to find an encoding suitable for automatic post processing.
Automator anyone?

Error occurred while forwarding a message for distributed destination

Is there a change in the way that Uniform Distributed Destinations are handled in the cluster after weblogic9.2?
I am using oracle weblogic 10.3.0.1 in production mode. I have two managed servers, each managed server has a JMS Server.
I create a Uniform distributed Topic on the System module, and publish a message to it.
I can see the message in the topic on the first JMSServer but the following error happens and the message never makes it to the second JMSServer
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Cluster> <BEA-000162> <Starting "async" replication service with remote cluster address "null">
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on IP:PORT for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 24, 2009 2:00:45 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ManSvr1" for domain "Domain" running in Production Mode>
<Sep 24, 2009 2:00:46 PM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on mip:mport>
<Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 24, 2009 2:00:47 PM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Sep 24, 2009 2:09:52 PM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destination member JMSSystemResource!JMSServer2@example: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 8935413426058515615S:fqhn:[-1,-1,sslport,sslport,-1,-1,-1]:Domain:ManSvr2, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):fqhn:nonsslport:null:-1'; No available router to destination; nested exception is:

I specified the cluster address, but still get the following errors after a message is published to the topic. Are there other configuration items that can be checked?
<Sep 29, 2009 9:51:49 AM GMT+00:00> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Sep 29, 2009 9:52:01 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultAdministration" is now listening on 10.241.134.92:7018
for protocols admin, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.241.134.92:7019 for
protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000330> <Started WebLogic Managed Server "ClusManSv
r2" for domain "domain" running in Production Mode>
<Sep 29, 2009 9:53:26 AM GMT+00:00> <Notice> <Cluster> <BEA-000102> <Joining cluster Clus on 224.0.0.10:7390>
<Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Sep 29, 2009 9:53:27 AM GMT+00:00> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Sep 29, 2009 9:56:14 AM GMT+00:00> <Warning> <JMS> <BEA-040498> <An error occurred while forwarding a message for distributed destinati
on member SOAFJMSSystemResource!SOAFJMSServer1@EventingAdminTopic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExc
eption: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:testnn
2092.net:domain:ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Def
ault[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:
managedServer.net:[-1,-1,7017,7017,-1,-1,-1]:managedServer.net:domain:
ClusManSvr1, java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; N
o available router to destination; nested exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,1
1217,7017,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No
known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No available router to destination; nested
exception is:
java.rmi.ConnectException: No known valid port for: 'Default[t3]:t3(t3):managedServer.net:7018:null:-1'; No ava
ilable router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:158)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:503)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:499)
Truncated. see log file for complete stacktrace
java.rmi.RemoteException: Could not establish a connection with 5660061832836428941S:managedServer.net:[-1,-1,7017,701
7,-1,-1,-1]:managedServer.net:domain:ClusManSvr1, java.rmi.ConnectException: No known v

Equivalent for an "IP accounting" in MPLS Network

Do we have an equivalent for an IP accounting in an interface in MPLS network. I would like to know this to identify traffic flowing across a WAN interface which is being tag/label switched

Thanks gopal. However this command "show tag-switching forwarding table" did not help me find a host in a network choking up the WAN link. I heard from one of the cisco reps saying cisco is releasing an IOS to do this in Feb. I hope that helps.

Is there a logic:match equivalent for JSTL?

In a search page I execute a query which returns an array of objects (All objects are of the same object type and are cast to Object[]) and each object has many attributes. I tried using <logic:iterate>, but I was never successful in having it display any results. I believe this had something to do with the entire array being passed via session scope instead of just one record and me not specifying it properly with <logic:iterate>. I was able to successfully use <c:forEach> and it worked right away. I stuck with using that because of its "just works" ability in addition to using a lot of other JSTL code. However, one of the attributes that is being printed out needs to be parsed and is of the form "Yxxx". <logic:match> covers this very nicely, but when I specify it in the below code it is not able to find my variable in any scope.
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
    <logic:match parameter='${myResults}' property='pin' value='Y'>
        <c:out value="Preeti"/>
    </logic:match>
</c:forEach>I have done several google searches, but I haven't found a JSTL equivalent for <logic:match>. If there is one could someone please tell me what it is? In addition, although <logic:match> is great I still need to print out a substring of that attribute. Could someone tell me how to do that? If this is not possible could someone please tell me if its possible to use <logic:iterate> with an array of objects like I was attempting to do initially so that I could use <logic:match> at least?
Thanks to all of you for your time.

Yes you can use the logic:iterate tag. I think you have to specify the type of the exposed variable though. I prefer the forEach loop.
I think you are using the wrong attribute in the logic:match tag. You should be using the "name" attribute rather than "parameter"
Parameter attribute refers you to a request parameter, and I pretty sure you don't want that.
So given the collection of objects in the session attribute "result"
This should loop through them all, and see if they start with the letter 'Y'
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
    <logic:match name='myResults' property='pin' value='Y'>
        <c:out value="Preeti"/>
    </logic:match>
</c:forEach>As for the latter bit, are you using a JSP2 container and JSTL1.1? It would appear so seeing as you are trying to use EL expressions in the logic:match tag.
If so, you could make use of the JSTL function library:
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
   <c:if test='${fn:startsWith(myResults.pin, "Y")}'>
      <c:out value="${fn:substring(myResults.pin, 1, -1)}"/>
    </c:if>
</c:forEach>And I've just spotted a very cool function in there: substringAfter
<c:forEach var="myResults" items="${sessionScope.result}" varStatus="status">
      <c:out value='${fn:substringAfter(myResults.pin, 'Y')}'/>
</c:forEach>Cheers,
evnafets

JMSAn error occurred while forwarding a message for distributed destination

Hi,
i have getting issue with JMS Server delivery fail, below is the errors
####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> < <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destina
tion unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:d:d4a, java.rmi.Con
nectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
####<Aug 24, 2012 2:03:54 PM CDT> <Warning> <JMS> <dal604se113com> <a> <[ACTIVE] ExecuteThread: '20' for queue: 'weblogic.kernel.Default
(self-tuning)'> <<WLS Kernel>> <BEA1-0979336B7FF44582D27D> <> <1345835034568> <BEA-040498> <An error occurred while forwarding a message for distribute
d destination member SystemModule-0!d4a JMS Server@D Distributed Topic: weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteExcepti
on: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destina
tion unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:dsa, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
weblogic.messaging.dispatcher.DispatcherException: java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[
8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination
at weblogic.messaging.dispatcher.DispatcherWrapperState.dispatchAsync(DispatcherWrapperState.java:155)
at weblogic.jms.dispatcher.DispatcherAdapter.dispatchAsync(DispatcherAdapter.java:84)
at weblogic.jms.backend.BEForwardingConsumer$1.run(BEForwardingConsumer.java:492)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.jms.backend.BEForwardingConsumer.processMessages(BEForwardingConsumer.java:488)
at weblogic.jms.backend.BEForwardingConsumer.pushMessages(BEForwardingConsumer.java:300)
at weblogic.messaging.util.DeliveryList.run(DeliveryList.java:256)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.rmi.RemoteException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, java.rmi.Con
nectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Could not establish a connection with -2037322150112737172S:10.110.7.114:[8011,8011,-1,-1,-1,-1,-1]:ds:ds4a, jav
a.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.SocketException: Connection reset; No available router to destination; nested exception is:
java.rmi.ConnectException: Destination unreachable; nested exception is:
Edited by: Ikhan on Aug 29, 2012 4:00 AM
Edited by: Ikhan on Aug 29, 2012 4:01 AM

The distributed topic forwarders replicate messages to every member of a "replicated distributed topic". They will report errors if intra-cluster communication is interrupted or if servers in the cluster shut down. I recommend checking your server logs to see if other errors/warnings exist, and, if you suspect an intra-cluster communication problem, consulting the cluster troubleshooting guide(s) in the edoc.
Most newer apps (apps hosted on versions 10.3.4 or higher) should consider using the new "partitioned distributed topics" instead of "replicated distributed topics". These don't use forwarders and scale better.
HTH,
Tom

Mail server automatically cc all email for user to other acct but group...

Back on April 2007, David_X answered this question:
How to have the mail server automatically cc all e-mail for user to other accounts, (gmail, hotmail, etc). Here is the old post that explains that:
http://discussions.apple.com/thread.jspa?messageID=4357149&#4357149
What I did not catch at the time was if you setup a Group, one of three ways, the cc step no longer works. There is a fourth way but it is not practical. Creating local groups on individual Macs.
*Group method 1 per David_X:*
Use edited group files on the server.
The following sends to members of groups but does not show all recipients in the received message...
In /etc/postfix/aliases, add...
groupname: :include:/path/to/groupname.txt
In a file called groupname.txt (using plaintext editor)...
[email protected]
[email protected]
Reload aliases...
sudo newaliases
sudo postalias aliases
sudo postfix reload
Mail sent to [email protected] gets passed to amavisd once, before then being relayed out for each individual recipient.
*Group method 2 per David_X:*
Make a user, e.g., "accounts"
In mail settings, select 'Forward' option and enter the group members' email addresses, comma separated e.g.,
[email protected],[email protected]
This gets a bit 'long' for lots of members.
The email then gets sent to each of the people in this list.
*Group method 3 that I just discovered:*
Create a group in Workgroup Manager.
Drag the users you want in it.
Save.
Test sending to that group.
Best part, the group name shows up in Address Book if you have LDAP setup.
So I have setup all three. If I send an email to any type of group, they work.
The problem:
If one of those members in the group also has a BCC setup to Gmail or any other outside email, they never get the e-mail copied out to the external account.
Example:
I send an email to [email protected]. He gets the email there and also a copy at his Gmail account.
If I send an email to the Sales group that jsmith belongs to, he gets the email there but nothing at the Gmail account.
It looks like the mail server processes the "aliases" file and skips the "Recipient_bcc" file that handles the forwards.
Is there a way to have my cake and eat it too? David_X your thoughts also?
Thanks everyone!

Bump.
Short version. Sales guy has a Gmail account he wants his e-mail copied to also.
Send e-mail directly to his Xserve account, he gets it there and it gets sent on to his Gmail account.
Send an e-mail to the sales Group that he is a member of, he gets it there but it never gets sent out to the Gmail account.
Ideas?

What is the equivalent for 'On Change of' Event in ABAP OBJECTS?

What is the equivalent for 'On Change of' Event in ABAP OBJECTS? and how to use it in LOOP control?

hi,
There is no such Equivalent in OO ABAP.
You have to Raise your own Event within tha class checking the value of the field whose value is changing.
Regards
Sumit Agarwal

HDD Health: How to check it? HD Tune Pro equivalent for Mac?

hi all, i was just wondering if there's a Mac equivalent for HD Tune Pro. it's a Windows app i use to check for errors on hard drives. i want to check if an externall 1TB HDD has any bad sectors on it before i use time machine to backup my work. i want something that'll check for any small error -- i don't want something that'll just do a basic scan.
thank you

ThunderCon wrote:
but there's software that can do it on Windows so there must be something on the Mac.
DiskUtility, DiskWarrior, TechTools, Genius, etc. etc. just do a google search. Most are paid apps except DiskUtility which is already built in and can be accessed from your reinstall partition. I personally don't bother with any except DiskUtility, but do keep a copy of DiskWarrior on hand just in case.
Developers will convince you that you need all sorts of programs to check and repair most often manufactured disc ailments, but if you are one of those happy to pay, then that is your choice.
Good Luck
Pete

HT4967 Mobile Me was so handy. I pushed the little sync button and everything updated. Is there any equivalent for I Cloud?

Mobile Me was so handy. I pushed the little sync button and everything updated. Is there any equivalent for I Cloud?

Welcome to the Apple Community.
Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage. (not all these alternatives offer all the services previously provided by iDisk)

ACE - x-forwarded-for equivalent for other protocols than HTTP

Similar Messages

Maybe you are looking for