Acquiring data(10 chanels) and save them in 10 files (*.wave format ) in 1hours

I have some problems that :
-  I have to acquire data from 10 chanels (acquiring continuously- Analog Input) , show them on the graphic and save each one in each *.wav file format ( Total : 10 file )
I need LabView code to solve my problems
Now I use : - DAQcard 6036E
                   - LabVeiw 7.0
                  - Window : 2000
Please help me ! Hurry up ! Thank you very much !

Hello ChieBK,
There are shipping examples that would allow you to acquire from analog
input. All you will need to do is change a few things to make it
acquire from 10 channels. The example I attached below shows how you
can acquire from 10 channels (configured in RSE since you may not have
enough channels to do differential) and how to split up the channels
and save in separate files. I am saving 4 channels. I do recomment
though that you save all the channels in a single file since it will be
more performent.
Good luck.
Attachments:
Cont Acq&Graph Voltage-Int Clk Filr.vi ‏436 KB

Similar Messages

Open all pages in a PDF and save them as sequential files

I'm trying to make a script that will open all pages in a multi-page PDF and save them as sequential files, but I have had no luck with the simple script in the "Adobe Ilustrator CS5 Reference: JavaScript".
there example to open a PDF to a designated page does not work for me in Illustrator CS 5.
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
var fileRef = filePath;
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
if anyone can get me on the right path it would be appreciated.

Hi DuanesSFK,
you can open a PDF page on this way (tested with CS3 and 5):
//OpenPDFpage2.jsx
var uILevel = userInteractionLevel;
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
// Opens a PDF file with specified options
var pdfOptions = app.preferences.PDFFileOptions;
pdfOptions.pDFCropToBox = PDFBoxType.PDFBOUNDINGBOX;
pdfOptions.pageToOpen = 2;
// Open a file using these preferences
//var fileRef = filePath;
var fileRef = File("~/Desktop/YourOwn.pdf");
if (fileRef != null) {
var docRef = open(fileRef, DocumentColorSpace.RGB);
app.userInteractionLevel = uILevel;
To open all pages you have to loop through all pages etc.
Easier for you:
Search here in forum for the "open pdf" script (I don't know the exactly name, it was written by CarlosCanto, ) This should always work for you.
Have fun

A script that captures the coordinates of the mouse clicks and saves them into a file

Hello,
I'm trying to create a cartoon taking a movie (I've chosen blade runner) as base. I've got the real movie and I've exported all the pictures using VirtualDUB. Now I have a lot of images to modify. I would like to modify the actors faces with the faces generated by Facegen modeller. I'm thinking how to make the whole process automatic because I have a lot of images to manage. I've chosen to use Automate BPA,because it seems the best for this matter. I'm a newbie,so this is my first attempt using Adobe Photoshop and Automate BPA. I wrote a little script. It takes a face generated with Facegen modeller and tries to put it above the original actors faces. But it doesn't work very good and I'm not really satisfied,because the process is not fully automated. To save some time I need to write a script that captures the coordinates of the mouse when I click over the faces and that saves them into a file,so that Automate BPA can read these coordinates from that file and can put the face generated with Facegen Modeller above the original face. I think that Automate BPA is not good for this matter. I think that two coordinates are enough,X and Y. They can be the coordinates of the nose,because it is always in the middle of every face. It is relevant to knows how big should be the layer of the new face,too. This is the Automate BPA code that I wrote :
<AMVARIABLE NAME="nome_foto" TYPE="TEXT"></AMVARIABLE>
<AMVARIABLE NAME="estensione_foto" TYPE="TEXT"></AMVARIABLE>
<AMSET VARIABLENAME="nome_foto">br</AMSET>
<AMSET VARIABLENAME="estensione_foto">.jpeg</AMSET>
<AMVARIABLE NAME="numero_foto" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_x" TYPE="NUMBER"></AMVARIABLE>
<AMVARIABLE NAME="coord_y" TYPE="NUMBER"></AMVARIABLE>
<AMWINDOWMINIMIZE WINDOWTITLE="Aggiungere_layer - AutoMate BPA Agent
Task Builder" />
<AMWINDOWMINIMIZE WINDOWTITLE="AutoMate BPA Server Management Console
- localhost (Administrator)" AM_ONERROR="CONTINUE" />
<AMENDPROCESS PROCESS="E:\Programmi_\Adobe Photoshop
CS5\Photoshop.exe" AM_ONERROR="CONTINUE" />
<AMRUN FILE="%"E:\Programmi_\Adobe Photoshop CS5\Photoshop.exe"%" />
<AMPAUSE ACTION="waitfor" SCALAR="15" />
<AMSENDKEY>{CTRL}o</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMINPUTBOX RESULTVARIABLE="numero_foto">Inserire numero FOTO di
partenza -1</AMINPUTBOX>
<AMINCREMENTVARIABLE RESULTVARIABLE="numero_foto" />
<AMPAUSE ACTION="waitfor" SCALAR="1" />
<AMMOUSEMOVEOBJECT WINDOWTITLE="Apri" OBJECTNAME="%nome_foto &
numero_foto & estensione_foto%" OBJECTCLASS="SysListView32"
OBJECTTYPE="ListItem" CHECKOBJECTNAME="YES" CHECKOBJECTCLASS="YES"
CHECKOBJECTTYPE="YES" />
<AMMOUSECLICK CLICK="double" />
<AMPAUSE ACTION="waitfor" SCALAR="10" />
<AMSENDKEY>{CTRL}+</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="20" />
<AMSENDKEY>l</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="659" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="546" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="429" MOVEY="281" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMSENDKEY>v</AMSENDKEY>
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="hold_down" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="131" MOVEY="99" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSEMOVE MOVEX="99" MOVEY="162" RELATIVETO="screen" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMMOUSECLICK CLICK="release" />
<AMPAUSE ACTION="waitfor" SCALAR="2" />
<AMINPUTBOX RESULTVARIABLE="coord_x">Inserire coordinata X</AMINPUTBOX>
<AMINPUTBOX RESULTVARIABLE="coord_y">Inserire coordinata Y</AMINPUTBOX>
<AMMOUSEMOVE MOVEX="200" MOVEY="200" RELATIVETO="screen" />
<AMMOUSECLICK CLICK="hold_down" />
<AMMOUSEMOVE MOVEX="%coord_x%" MOVEY="%coord_y%" RELATIVETO="position" />
<AMMOUSECLICK />
and this is a short video to explain better what I want to do :
http://www.flickr.com/photos/26687972@N03/5331705934/
In the last scene of the video you will see the script asking to input the X and the Y coordinates of the nose. This request is time consuming. For this reason I want to write a script that captures automatically the coordinates of the mouse clicks. The only thing to do should be click over the nose and the script should make the rest. As "c.pfaffenbichler" suggested here : http://forums.adobe.com/thread/775219, I could explore 3 ways :
1) use the Color Sampler Tool’s input with a conventional Photoshop Script.
2) use After Effects would provide a better solution.
3) Photoshop’s Animation Panel might also offer some easier way as it might be possible to load two movies (or one movie and one image) and animate the one with the rendered head in relation to the other.
Since I'm a totally newbie in graphic and animation,could you help me to explore these ways ? Thanks for your cooperation.

These are the coordinates of the contours of the face that you see on the picture. Can you explain to me how they are calculated ? The coordinates of the first colums are intuitive,but I'm not able to understand how are calculated the coordinates of the second one.
Thanks.
1 COL 2 COL (how are calculated these values ?)
307.5000 182.0000 m
312.5000 192.0000 l
321.5000 194.0000 l
330.5000 193.0000 l
335.0000 187.0000 l
337.0000 180.5000 l
340.0000 174.0000 l
338.5000 165.5000 l
336.0000 159.0000 l
331.5000 153.0000 l
324.5000 150.0000 l
317.0000 154.0000 l
312.5000 161.0000 l
309.0000 173.0000 l
307.5000 182.0000 l
Message was edited by: LaoMar

Saved a few images to Dashboard. How can I get them out of there and save them to a file? Thanks

Saved a few images to Dashboard. How can I get them out of there and saved to a file? Thanks

I'm sorry, I'm lost & don't even know what to ask.
Oh wait, open Dashboard in Applications, do the Pics show there?
http://techland.time.com/2013/01/22/the-slow-but-almost-certain-demise-of-apples -os-x-dashboard/

Want to cut frames just out of mp4 source files (gopro) and save back to mp4 files without changing format ot stuff like this - how to? Thx

Hi,
get freaky - I only want to reduce unpopular film sequences out of some gopro mp4 files and save them back in the same format. Just mp4 to mp4? Has anyone a warm idea. Thank you.

thomase
If you want a H.264.mp4 1280 x 720 @ 29.97 progressive frames per second export as the match for your source video with those properties, then you use
Publish+Share
Computer
AVCHD
with Presets = Vimeo HD which will give you 1280 x 720 @ 29.97 progressive frames per second.
or
Publish+Share
Computer
AVCHD
with Presets = MP4 HD720p24 and the hit the Advanced Button/then Video Tab to customize the preset to MP4 HD720p29.97.
After you hit the Advanced Tab/and the Video Tab and put in your settings, the Advanced Export setting should look like
Note: Click on the Chain link in the box to the right of Frame Width and Frame Height so that you can type in your 1280 and 720.
Do not hit Match Source. Put the values in yourself.
One of the major factors that we need in all this is the bitrate value of the original. We want to make sure that the bitrate of original
and export as the same or with the bitrate of the export being higher than the original. More on that later.
Please let me know if you are following me in the details so far. If not, please do not hesitate to tell me where you need clarfication.
Thanks.
ATR

Catch the image of JTree and save it as a file

There is an JTree and it has a few nodes.
And there, I want to capture both the image of JTree and
the images of it's child nodes as they show in screen.
if possible, I want to capture image of all expanded nodes in tree and
save them as jpg file.
I try to capture the Image of JTree from JTree.createImage() method.
and I also tried to capture the images of child nodes
from JTree.getComponents() and capture images all of child nodes as they were.
I,however,get to know the method
Component.createImage() doesn't return the image that shows in screen as it was.
could anybody tell me the answer?

Hi,
don't know if I got you right, but what you want is a "screenshot" of the JTree, right ?
Try to paint the JTree in a BufferedImage and encode this as JPEG or whatever.
BufferedImage theImage = new BufferedImage(
      owner.getWidth(), owner.getHeight(), BufferedImage.TYPE_INT_RGB);
      Graphics g = theImage.createGraphics();
      g.setClip( 0, 0, owner.getWidth(), owner.getHeight());
      owner.paint( g);owner is your JTree or any other component you want.
Hope that helped.

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

Hi Joe,
Thanks for your quick response. I should add....it worked before. When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac. Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed. I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD. SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously. I do not remember changing any settings since then.
When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc. The problem is my DVD is all miscellaneious files/documents. I just want to be able to see them in the finder. I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents. Again, I was able to open them previously and the DVD is not corrupted in any way.
Any additional advice?
Thank you!

Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

Is there any way to edit and save an existing spreadsheet file that was not created from my iPad? I get excel spreadsheets emailed to me and would love to edit them on my iPad and not ever use my PC.

Thanks. I tried an app called Office2HD and it does exactly what I need. I can even email my edited file from this app.

Developers I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsb

mule13470
Apr 3, 2014 11:12 AM
I tried simply renaming them however it just corrupts the files when I do it like that so I need the applescript to open the files in excel and the save them as .xlsx to test I only need it one folder but if it works I'd like to be able to do it for all documents with .xlsb extentions that are in a huge folder with subfolders that contain a mix of .pdf, .docx, .xlsx and .xlsb. Please Help.
Applescript Editor, Mac OS X (10.6.8)
I have this question too (0)
Reply
Categories: Using OS X MavericksTags: mac, help, finder, excel, applescript_editor
Level 1 (0 points)
mule13470
Re: I need an applescript that opens documents in excel from a specified folder and saves them as .xlsx from their current .xlsbApr 3, 2014 11:19 AM (in response to mule13470)
In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.

In that huge folder I only need the .xlsb files opened and saved to .xlsx not the others, in case that wasn't clear above.

Are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

are my iCloud photos stored? I lost phone abroad and want to access the photos and save them to my iPad.

Photo stream photos remain in iCloud for 30 days, and can be accessed by enabling my photo stream on another iOS device or computer. Shared streams remain in iCloud indefinitely, and can be accessed by enabling Photo Sharing on an iOS device or computer. Your camera roll photos are included in your device backup. Restoring the backup to another iPhone or iPod touch should recover them (unfortunately, you can recover them by restoring an iPhone backup to your iPad). If the backup is an iCloud backup be aware that Apple will delete it after 180 days of inactivity so you'll want to restore the backup prior to that.

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those clips in Organizer. I can do that in Premiere Elements 12 and save them as "Projects" - but how do I get the divided clips back into Organizer?

I have old video clips in Photoshop Elements Organizer v12 for Mac. I want to divide some of those single clips into 2 or 3 separate clips, each shown separately in Organizer. I can divide the clips in Premiere Elements Editor 12 and save them as "Projects" - but I can't find any way to get those divided clips back into Organizer. Does anyone know whether that can be done? Many thanks for your thoughts.

What about Google Drive? And just share the folder with the family members.
Erick

How to pull data from EJB and present them using Swing ?

Hi all,
I've written stateful session bean which connect to Oracle database, and now I must write stand alone client application using Swing.
The client app must present the data and then let users add,delete and edit data and it must be flexible enough to iterate through the records.
The swing components can be JTextField,JTable etc.
How to pull the data from EJB and present them to users with the most efficient network trip ?
Thanks in advance
Setya

Thanks,
Since the whole app originally was client-server app and I want to make it more scalable, so I decide to separate business logic in the EJB but I also want to keep the performance and the userfriendliness of the original user interface, and I want to continue using Swing as the original user interface does.
I've read about using Rowset and I need some opinions about this from you guys who already have some experience with it.
Any suggestions would be greatly appreciated.
Thanks
Setya

How do I take movies and save them on the iPad?

How do I take movies and save them on the iPad?
Thank you for your help.

Tank you Jim for responding: "(swipe Video to the selected position - don't just touch it)."
(I can't believe this!) I open camera. tap video: nothing. Swipe video button (where to?) nothing.
Reading videos at a glance in the iPad user guide gives me nothing. I know I must be missing something.
Thank you for your help.
Walter

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community

When I export my photos and save them as a jpeg. Am I still losing information?

When I export my photos and save them as a jpeg. Am I still losing information? Would I be better of saving them as a TIFF or a PSD? Also I know DNG is a digital negative, would that be the better format to save all my stuff?

I apologize if you already thoroughly know all this (I couldn't be sure):
When you export, you don't change the original (i.e. you never overwrite the original). So, you can export a million times and never lose quality (of the original), regardless of the export formats you choose.
Of course the quality of the export depends on the chosen format, and if the format is lossy (e.g. jpeg), then export quality also depends on the size & quality settings.
TIFF is lossless, so quality is essentially equivalent to the raw in Lightroom. It's the preferred format if a really BIG file is OK. Jpeg was invented to reduce file-size as much as possible without being too much inferior, quality-wise - and it does that very well.
DNG is good for some stuff, but don't export your photos in DNG format unless you know what you are doing and why... Lot's of people like converting their originals to DNG format, but that's a whole different kettle of fish...
Note, it may very well make sense to export a jpeg as tiff, since exporting a jpeg as jpeg is not as good. - reminder: when you export, you are not overwriting the original, you are making a new copy from the original, by combining it with develop edits if there have been any.
Rob

Acquiring data(10 chanels) and save them in 10 files (*.wave format ) in 1hours

Similar Messages

Maybe you are looking for