Acrobat 9 - hyper link issue and print in larger font

I am using Acrobat 9 and have two issues :
When I try to convert a web page to pdf file i.e. through the print command in FF, the text links are there in the new file but without the underlying hyper links ?
How can I print the files with a larger font. It is okay for seeing it on monitor but too small for me when I print.
thanks.

Do as AbhigyanModi suggests or use the Adobe Acrobat plugin that should be in your web browser if you're using Internet Explorer. This happened because you "printed" to convet to PDF. You have to use either AbhigyanModi method or use the Internet Explorer plugin to save active hyperlinks.
In terms of the font size -- You can set up the web capture preferences first. Explore the menu that AbhigyanModi suggests or use the built in help. It's there for a reason.

Similar Messages

Acrobat 9 Pro issues with printing and now updating !!! :(

hello
I had an issues with printing from my gmail account or from windows live mail
so I made a complete re-installation
now I am stuck with version 9.3.0 and when I check for updates I get a message
UPDATER IS ALREADY RUNNING
only... it's not running and nothing is updating !
I made a restart... just in case... it did not change anything
as to the printing issue, in case some of you have met it and cleared it...(hope)
this was with version 9.5.0
I get no error message but no pdf is created, only a text document with this :
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
72gmvi not found, using Courier.
44dcmta not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: xshow ]%%
Stack:
[96 96 97 72 96 42 64 0]
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
%%[ Warning: PostScript error. No PDF file produced. ] %%
not a good start for my week... I hope yours is nicer
I'm running Win7 Ultimate x64

thanks Mylenium
the font association problem is something recent though, since I used acrobat to print mails directly from my gmail account previously...
it's galling but I installed a free pdf printer which does the job, I needed copies of these mails urgently !
as to the update issue, I see no aum.exe, msiexec.exe or setup.exe running... but that's quite above my head... do I look for those exact processes or are they generic names for processes ?
does my question make sense ????

PDC cheques issue and Printing

Dear SAP Friends,
We have a functionality of Post dated cheques, my client want to issue the PD cheques 600 at a time with different dates.Please let me know how we can do this in SAP system.
2nd Scenario : Printing of post dated cheque, I am issuing of post dated cheque to vendor for next month on today date, I am giving the value date of future date but when i printing the cheque system is taking today date only, Please let me know in this regard.
One more scenario is: We are using F-57 Noted item functionality for Post dated cheque, in this case how we can issue the cheque.
Please let me know about above points.
Regards,
Anand

Hi
There are two ways to handle the scenario:
1. You create the payment document. Against the payment Document create a manual cheque, where in you can specify the Cheque date. Create a Z Transaction for printing the cheque by picking the data from Table PAYR
2. The other way is to change the posting date and than print the cheque.
Regards
Sanil Bhandari

Resize and print a large image in a report

A current project I'm working requires that a "report" be printed out for every "part" produced.
Each "part" is photographed and a high quality (large) .jpg file is
generated and cataloged on the hard drive. A report with this
image is then printed and shipped with the product as part of a QA
process.
Initially I used a command line argument to have Irfanview print the
image only. This was so easy. Even printing in Landscape
was simple. Of course then I realized I would probably need a
little more information than just the image.
Looking at some examples of report generation and reading some of the
problems others have had in the past, I figured it might be good to ask
before I go stumbling around in the dark.
The original images are 2288x1712 in size.
Is there any way to auto resize an image to "fit" onto a printed report?
The only way I can think to do is to experiment with different sizes
until I find something that fits and looks alright, then use either
IMAQ tools or an Irfanview command to resize the image before appending
it to the report.
If anyone has any tricks for this one, I'd love to hear them.
Patrick Allen

Here, but like I said, it's a very stupid VI. It doesn't do any avareging or smoothing and it has no mathematical optimization (assuming that there is any). It just removes some of the elements. This has been good enough for displaying images, but might not be good for anything else, because you lose a lot of details.
Try to take over the world!
Attachments:
Resize.llb ‏98 KB

Adobe Acrobat 8 standard - crash when print pdf with watermark

it is the EXACT same issue as this:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402928&sliceId=1
the problem is, the steps indicated here to fix the problem in solution 1, do not apply to STANDARD, even though it says it does.
Solution 3 works just fine.
The problem is this, I do not want my watermarks at 100% opacity. Every solution I have found says "Select PDF Optimizer from the Advanced menu.
I do not see that menu/option anywhere in acrobat 8 standard. I need a fix for this issue, and printing a watermark at %100 opacity or getting a new printer isn't a solution.
Apparently if I could just run the pdf optimizer i could fix this issue, but its nowhere to be found.
I was hoping someone could shed some light on this for me. Thanks in advance

I believe the PDF optimizer is only in Professional. I don't have 8 on
my machine now. There may have been something under the file menu that
did some optimization called Reduce File size, but I don't know if it
will fix your problem or what version numbers had the option.
Mike

How do you change the page format to print a larger area?

Hi there, another new to mac and new to numbers guy.
I'm trying to find the windows equivalent to change page format.
I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you from printing up to the paper edge?
cheers

Page margns in Numbers are set in the Layout Inspector.
Open the Inspector and click the Layout button.
Edit the four margin settings as you wish. Reduce the (page) header and footer settings to zero if you don't want to include running headers or footers on your pages.
Note that margins will be limited by the capabilities/settings of your printer. Printing to the edges of the paper usually requires a choice to be made in the Print dialogue as well as for the document itself.
Regards,
Barry

URL Links in Guided Procedures appear in large fonts.

Hello Gurus,
While navigating through a guided procedure application I had developed using Web Dynpro I noticed that all the URL Links appeared in a large font. I tried switching the font size to small but this made no difference in the views. Then I noticed that throughout the entire GP administration interface all the links were in the same larger font. Is there some configuration file where this property can be changed. It is affecting the look and feel of the application.
Thanks,
Luis

Thanks Sue, I was afraid of that!
The section of GB help on adding URLs says you can view via iTunes or DVD, and launch the website by clicking the link, hence my confusion.
It's a shame, because that would be a great feature in making sales or marketing DVD's - any idea why the disconnect, and do you know if Apple plans to add that feature?
Thanks again!

FIM CM Bulk Smart Card Issuance Client and Printing Smart Cards

Hi,
From what we are reading, the Bulk Smart Card Issuance Client can be used to Issue and Print Smart Cards - what does MS mean by 'print smart cards'?
Do they mean 'print on smart cards' like for instance users photo's?
Or would we still need to utilize something like ID Works Software?
Thanks

With FIM-CM you are limited to which software Middleware and printers you can use (at least the version I am running FIM 2010).
We are running ID Works Enterprise Edition 5.1 on a windows 7 x32 workstation.
CM now supports ID Works Enterprise Edition 6.51 which supposedly can work on an x64 system but we haven’t tried it.
One thing to note is the cm software patch. The CM Update allows the bulk client to be installed on windows 7. But you can't install the client on windows 7 to apply the patch that lets it run on 7. The work around is the Microsoft released
a copy of the bulk client with the patch already applied. This worked fine for the install. But we got errors when we tried to connect to the CM Servers. It couldn't find the templates. Turns out the dlls in the patched bulk client
were newer than the .dlls on the CM server, and this was breaking the notification. We patched the CM server, and everything was good.
For Printers we got 2 SP75 plus Datacard printers. We wanted the higher capacity, and the ability to laminate both sides of the card. We got two for coverage so we will have one when we have to send one in for repair. (Not saying that the
printers are "bad” but they take a lot of abuse printing, and need a lot of care).
Although the Plus printers aren’t listed in the supported printers, we got confirmation from MS that the Plus worked (they replaced the older ones), but that the newer 95's probably wouldn't. (I think they are a different kind of printer).
One more data point to add. Work out your Pin Policy before you buy your cards.
We got our cards first, and then figured out our PIN policy. If we knew our PIN Policy at purchase time, the manufacture (Gemalto) could have set it. We have been working on ways to set it using CM. But have finally given up.
We figured out how to set the PIN policy using APDU commands, and CM can do application management via APDU commands. But it looks like it can only do that for Java Cards, and not the .net cards (yet, we keep hoping). So we are going to set the
Pin Policy before we bulk print. And when we order our next set of cards, we will order them with the PIN policy set.
Over all I am very happy with CM. and there is a lot more information on setting it up now than there was a two years ago (thanks a lot to Paul Adare and Brian Komar, who I am beginning to think are the same person. Has anyone actually
seen both of them at the same time?

Can I use Acrobat 11to download pdf that only allows me to read, enter data, and print?

I need to complete gov. forms available online as pdf. I can review, enter data and print, but I cannot save to my computer or anywhere else. I need to be able to save so I can return to the form and enter information as I access it. Can this be done if I purchase Acrobat 11 and, if so, can I get the Standard edition? I currently only have Reader.

Yes, if you upgrade to at least Acrobat Standard you will be able to save. Since you can't save with Reader (assuming 11), the forms are probably XFA forms (created with LiveCycle Designer), which must be Reader-enabled in order to be saved with Reader. Reader 11 can save non-enabled AcroForms (forms created with Acrobat), but not non-enabled XFA forms. If you have a Reader version prior to 11, try using Reader 11 to see if it will save.
If you can provide a link to one of the forms, I can tell you for sure what the minimum requirement for saving is.

PDFs display and print fine in Acrobat but not in Preview of PDFPenPro

I have a curious problem in that check boxes in certain PDF files (insurance applications) appear as a "p" instead of a check box when I view the file in Preview or PDFPenPro. The check boxes appear and print properly when I open the PDF in Acrobat.
I've checked the fonts with the Apple Font utility and there seems to be no issues with any of the fonts.
Any suggestions?
Thanks.
Bud

Hi,
Strangely I'm now having exactly the same problem all of a sudden. I've been building the book for about a month now (I've made about 6 before without any trouble) and along the way have been producing a pdf of the book to see how it will look. Yesterday I noticed some of the images seemed to have lost colour when looking at the pdf version and then today, many pictures all of a sudden look exactly like the example you've supplied above.
I've tried shutting down my imac and restarting thinking it was a memory issue, have checked if I had any filters activated (which I don't and I haven't used filters in books before either), have tried repairing then rebuilding aperture, copying the book to a new library, new location, opening on a different mac and then printing again but none of this had any positive effect.
So from what I understand from your last post, the workaround you came up with was to revert to the original of each image that had the problem and then make the adjustments again?

How do I edit a "fill and print form" using Acrobat XI?

We recently upgraded to Adobe Acrobat Pro, version 11. We have some staff who previously created "fill and print" forms with Adobe Acrobat 10. However, now when they try to use version 11 to edit the form, they receive the following message: This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form.
If I remember correctly, version 10 (or some package suite) use to install LiveCycle along with version 10. This doesn't seem to be the case with version 11. So... How do we obtain LiveCycle Designer? Is it still available to install on a desktop or is it only available in the cloud? Or, preferably, is there a way to edit the form using Acrobat Pro version 11?
I don't work with Adobe forms myself, so any information you can provide will be extremely helpful. Thanks.

LCD forms can only be edited in LCD. However, Adobe stopped distributing LCD together with Acrobat. You need to purchase it separately now, but if you had a previous license you can get it at a large discount, I think. Try the LCD forums for more info about that.

How do I edit a "fill and print form" using Acrobat Pro XI?

We recently upgraded to Adobe Acrobat Pro, version 11. We have some staff who previously created "fill and print" forms with Adobe Acrobat 10. However, now when they try to use version 11 to edit the form, they receive the following message: This form cannot be edited in Acrobat. Please use Adobe LiveCycle Designer to edit this form.
If I remember correctly, version 10 (or some package suite) use to install LiveCycle along with version 10. This doesn't seem to be the case with version 11. So... How do we obtain LiveCycle Designer? Is it still available to install on a desktop or is it only available in the cloud? Or, preferably, is there a way to edit the form using Acrobat Pro version 11?
I don't work with Adobe forms, so any information you can provide will be extremely helpful. Thanks.

LCD forms can only be edited in LCD. However, Adobe stopped distributing LCD together with Acrobat. You need to purchase it separately now, but if you had a previous license you can get it at a large discount, I think. Try the LCD forums for more info about that.

Acrobat Reader 9.3 and 8.0 and IE 8 and web links

Hi
This is a bit odd but the last few days I have been having problems with Reader 8.0 and IE8 in that if I clicked a web link to a pdf then the new page just hung and gave the error "There is a problem with Adobe Acrtobat/Reader. Please exit Adobe Acrobat/Reader and try again." I upgraded to Acrobat 9.3 and have the same problem.
I looked further into the issue and found that this only occurs if the pdf file is opened in a new page. If the link target is not _blank then the file opens fine with no problems.
Has anyone else had this problem or know of a fix?
Thanks
Nikki

I hear what you are saying and everyone hates IE but we have to design for all browsers.
I guess the best work round is to forget the target as _blank and wait until Microsoft stop that working in IE as well!
Just thought someone else might have found a work round or that Adobe would want to find a fix also otherwise people will stop using Acrobat Reader as well.

Adobe Acrobat Reader 10.1.2 Print Issues - Windows Crash Error (2 Sided)

Have recently had issueswith our upgrades from 10.1.1 to 10.1.2 in regards to the following:
When printing 2 sided on a Fuji Xerox Firefly C4400 Atheros, application crashes after printing first 4 pages.
Thus, have tried the patch fix that was recommended on cpsid_92870 however this has not fixed the problem.
Have also tried the solution with the duplexing but still same issue, Windows crashes.
Have also tried solution to remove Windows patch KB4332667 and still same issue.
Screen shots will be provided upon request with the errors.
Currently running:
Windows XP SP3
Adobe Acrobat Reader 10.1.2
Printer Drivers are the latest and over 500 users on network. 485 are working on 10.1.1 which do not have this issue.
Is there any solution or 10.1.3 patch release that will address this issue?
Last Adobe user to work on this was Atul.

Sonal2890, thanks for your inquiry and I will try to provide as much information as possible.
1. What happens if inspite of using 'Print on both sides', you check Duplex setting from Properties dialog (As you do previously)?
      The Adobe Reader X Shuts down and is unable to print and displays a message stating it has incurred a problem. Please note, we are running IE7.
2. What happens if you print with any other application (Word/notepad)
     The documents print fine. IT is only when you print this particular document which is enabled in protected mode and double sided. Have tried the patch and the resolution of unticking the duplex methodology and the issue still persists.
     Crash Logs have already been submitted already. Have added the SEnd Error Report that was provided when the error occurs. The PDF stopped printing after page 6 of a 236 page document and provided the error above.

Creating Hyper-Links in Acrobat Pro 8

Good Day;
I am somewhat new at this so please forgive me if this question has been asked before.
I am running Acrobat 8 pro and I am designing some forms. One of the things I want to do is imbed a hyper-link in some of the text. This hyper link will take the user to the documentation on a webpage.
I have created a form using LiveCycle Designer 8 (part of Adobe Acrobat 8 pro not LiveCycle ES). Within this application there does not appear to be a way to create the hyper-links. I then opened the form in Acrobat 8 pro and the link tool is not available.
Is there a way to create a hyper-link in the form?
I hope I have explained this correctly
Chomp

The Chomp wrote:
I then opened the form in Acrobat 8 pro and the link tool is not available.
Chomp
If you created the form using Designer, you must make any edits in Designer and not Acrobat.

Acrobat 9 - hyper link issue and print in larger font

Similar Messages

Maybe you are looking for