Activating Full window size Adobe forms

Hi, We are implementing ESS/MSS. Most of the Adobe Interactive Forms are opening in Small windows. But We need them to be pop-up in full size so something similar. I could not find any direct settings related to it. Anyone has an idea of how to do it?
Thanks in Advance

Hi,
Note 1143512 is what causes the small window. The way to get back the full window to view your Adobe Forms is to Load the Web Dynpro ABAP component HRASR00_PROCESS_EXECUTE in the Web Dynpro Explorer of transaction SE80. Then click on "asr_form_display" under Web Dynpro Applications,and change the parameter "DISABLE_ADOBE_RESIZING" from blank to "X". Do the same thing for "asr_process_execute".
This will give you your full window back. The only problem is that this then gives you multiple verticle scroll bars. Pick your poison.

Similar Messages

Increase main oracle window size in forms 10g

I am creating a form in 10g. The form has a window and a canvas. I have given scroll bar for the canvas which has multiple blocks (so that a user can scroll within the multiple records) and a scroll bar for the window so that the user can scroll at the bottom of the page.
The main oracle window which displays the messages and errors (not my forms window) is not the full size, its a little small (there is white blank space at the bottom) and I want to increase its size to full so that the users may not necessarily need to use the window scroll bar.
Can someone please tell me how to increase its size?
Thanks.

Hello
I think that others user could have problems, above all, with 'SEPARATEFRAME=TRUE'.
Here a note from metalink:
Note:358468.1 How to Maximize the MDI Window correctly on Web showing the Status bar?
When you try to Maximize MDI window in to form using
set_Window_property(FORMS_MDI_WINDOW,WINDOW_STATE,MAXIMIZE) on web,
even though the MDI window appears as Maximized it is not actually maximized,
also it doesnt show the status cafe.
This issue has been explained in BUG#4944285 Known and 181100.1
Regards

Activation issue with new Adobe form in subsequent systems

Hi All,
I'm facing an strange issue in activating Adobe form.
The new Adobe form is copied from an existing form and assigned to a new output type of PO.
After tested successfully in Dev, we transport it to Q environment and other subsequent systems
But we will always get PO updating termincation error in Q and other systems firstly.
We go to SFP transaction and regenerated the Form there once, only after that it works perfectly and no termination error any more.
I'm not sure if I missed any step to activate the Adobe form as this is the 1st time I'm working on a new Adobe form.
I did activate the Adobe interface and form before releasing and TR consistency check was also carried.
Please let me kow if you faced the similar issue and what's the possible cause?
Thanks for your inputs.
Regards
Vindy

not really, someone else mentioned that it could be done and they said they saw it before. I've been beating myself up for a while trying to figure out how to get it to happen. Is there an easy way to get the content of the pdf form into an email body with plain text when pressing a submit by email button?
Such as...
<label name>: <txtfield content>
First name: <txtfield content>
...etc..

How to set the window size in form 10g

Hi all
i am migrating 6i forms to 10g
when i am running my form in 10g some of the window is missing in the browser(internet explorer)
how can i fit the size of the window in the browser????
Thanks

but is it compatible for different desktop resolutions????Set width and height 100% and set the seperateframe=true..it will for for all standard desktop resolution..
hope it will helpfull

Open report in full window

How can i open the report from form in full window size. I am using run_product.

Try
DECLARE
pl_id ParamList;
BEGIN
pl_id := Create_Parameter_List('reportdata');
Add_Parameter(pl_id, 'MAXIMIZE', TEXT_PARAMETER, 'YES');
Run_Product(REPORTS, 'e:\yourreport.rdf', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);
END;
Frank

Reading data from pdfsource of adobe form

Friends,
This error pertains to the retrieving data when executing the WDA application.
System details: NetWeaver 2004s. ADS support pack 16.
The Adobe Livecycle Designer version: 7.1.3129.1.296948
The Adobe Reader version: 8.1
The SAP GUI version: 710.
The Web Dynpro component is active.
The Custom Adobe Form is active and is of ZCI layout type. I also inserted the Web Dynpro Script in the layout of the form.
The Custom Form Interface is active and is of XML Schema-Based Interface type. The XML schema source is generated.
The Adobe form has been included as an InteractiveForm UI element in the MAIN view of the WD Component. The displayType property of the InteractiveForm UI Element has been set to "native" and enabled property of the form is checked.
I have included an attribute of type XSTRING called 'USERDATA' under the root context node and set it as pdfsource for the adobe form UI element.
I have included the "Submit" button from web dynpro native library in the form.
I have created a event handler method for the "onSubmit" event of the Adobe form UI element. I have created a reference to the context node 'ZECR' that is the datasource for the adobe form, through the following lines:
data: noderef type ref to if_wd_context_node,
eleref type ref to if_wd_context_element.
noderef = wd_context->get_child_node( name = 'ZECR' ).
when i run the WDA application, i am getting the error:
Subnode MAIN.USERDATA does not exist
Please let me know to rectify this error.
I am not sure how to proceed further ie how to retrieve the data from the XSTRING attribute. I need to populate the data from the attribute to a customized table.
Any hints or help would be greatly appreciated.
Thanks and Regards.

Hi Mahesh,
I got the code from wizard using Read Context and selected the node.
The error is removed.
Here is the code in the onSubmit event handler method:
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_userdata LIKE ls_context-userdata.
get element via lead selection
lo_el_context = wd_context->get_element( ).
get single attribute
lo_el_context->get_attribute(
    EXPORTING
      name = `USERDATA`
    IMPORTING
      value = lv_userdata ).
I understand data has to be read from lv_userdata parameter using a function module. Is there any standard function module for the same and what are the steps for the process.
Any hints or help would be greatly appreciated.
Thanks and Regards.

I need to know if my membership(s) with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active? If so; when does my membership(s) due to expire?

9 May 2014
Dear Tech or Customer Support:
I would like to know if my subscriptions memberships with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active? If so; when does my subscriptions memberships due to expire?
Please reply back by email with full details as to my requests at your earliest availability to: [email protected]
Sincerely,
Gwendolyn C. Baxter

Hello,
I just solved this problem on my computer.
Windows 7 comes with only one "Voice" installed. "Microsoft Anna - English (United States)" I'm not sure what you get if your in another country.
You can test your "Voice/Voices" by running Microsoft Narrator. Click [Start] button and type "Narrator" in the [search programs and files] box. Press [Enter]. Your computer should begin talking. Click [Voice Settings] button to see a list of installed voices. Take note of the voices listed. "Mine has just the one."
Adobe Reader must have a voice selected that you have installed. To verify your settings Run Adobe Reader. From the top menu click [Edit] then click [Preferences] at the bottom of the list. In the Preferences window click [Reading] from the left hand list. Find "Read Out Loud Options" Un-check [Use default voice] Choose a voice from the drop down menu that you have verified is installed on your computer. Click [OK]
My Adobe Reader had 4 voices listed to choose from. I found this curious because I only have one voice.
Hope that helps.

Adobe Reader, MS Office window size changing when switching displays

I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas?

I have a current generation (mid 2012) MBP with Retina Display running ML 10.8.3. I also have a Dell U2413 monitor, confgured for
1920x1200 resolution, connected via a Thunderbolt to Display Port cable that came with the monitor.
When I switch displays, Adobe reader, Excel, and Powerpoint all have their window sizes change dramatically. Reader
shrinks to just the status bar and is tucked in the very bottom left hand corner (it took me quite some time to even see it
was there at all); Excel windows expand dramatically to be much larger than full screen, and Powerpoint windows shrink
to about 1.5" square. Other windows (Mail, Chrome, Safari, iTunes) change or move slightly but are more or less OK.
I know this problem is expected when switching to an external monitor with dramatically lower resolution (e.g. old In Focus
projectors) but I don't believe it should happen with a hi-res monitor like the one I'm using.
I have compared this behaviour with other users running same SW versions and external monitors with the same
resoultion and they don't see this problem so I'm guessing there's some configuration option or low level setting
that is messed up.
These window size changes happen going both from internal to external and external to internal. Any ideas?

Adobe Form NOT getting displayed in WebDynpro Modal Window (Pop Up)

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
It seems to be available only for ABAP version. I cant find it in the java version.. check this..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/656442a1c4de54e10000000a155106/frameset.htm">Help SAP Link for Java Reference</a>
And even in ABAP , the pre-requisite seems to be installation of ACF,
The exact words
<i>
Adobe Reader (>= 7.0) and, if you are creating interactive forms, also the ActiveX Control Framework (ACF) installed on your computer. Also see SAP note 834573.</i>

Adobe Form not getting displayed in WebDynpro Modal Window

Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
Senthil

Hi,
even though this is quite an old post, it still could be worth for someone to have a look at Note 1342716.
Michal

SOAP error!! while activating or running an existing Adobe form

Hi,
I am working on Adobe forms in ECC6.0 server.
I am getting a SOAP error while I run existing forms or trying activating a Z* form.
<i>Error: ADS: SOAP Runtime Exception: CSoapExceptionTransport :(100101)</i>
I am trying to run an existing form in 800 client. It is running fine in 001 client.
ADS installed on 001 client but basis team is not able install it on 800 client.
How to install ADS on 800 client also. Is it a problem with ADS installation??
Thanks in advance.
Thanks,
Sreekanth Gollamudi

Pradeep,
You are right. This time I could bind the context from my interface (even though it was ABAP based).
I have one quick one for you - you mentioned earlier that when we embed an existing form into Web. View, we cannot have an Interactive form even when we check the 'enabled' property. Can you throw more light onto this pls?
The runtime error that i am encountering now says :
Adobe Processing Exception: PDF is not interactive. Data can be only imported into Interactive forms.
the source text of error is:
get result
m_pdf_object->get_document ( importing pdfdata = pdf ).
catch cx_fp_exception into lr_fpexc.
raise exception type cx_wd_general
exporting
previous = lr_fpexc
and this exception is not caught ! I am still lost
thanks again for your help!
Liz

6.0.1 update lost default window sizing and all windows open full screen now, why and how do I get my original window sizes back?

After updating Firefox to version 6.0.1, all browser windows open in full screen size. I need new browser windows to open in their original default size since I use a website for work that opens multiple browser windows.
I used to be able to fix this problem by renaming my localstore.rdf file in my profile and then restarting Firefox but this does not seem to work in this last update.
This appears to be a recurring problem for Firefox and it's extremely frustrating.

Safe mode disables the installed '''Extensions''', themes ('''Appearance''') and '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. So it could be that an extension is causing it. You can try to isolate it starting with script blockers and similar extensions and '''Disable''' or '''Remove''' it.
Please also note that safe mode also disables hardware acceleration: '''Tools''' > '''Options''' > '''Advanced''' > '''General''': '''Use hardware acceleration when possible'''.
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Yosemite: How do I get back from full-screen to original window size?

Okay, so today I used iPhoto for the first time since I reluctantly upgraded to Yosemite on Friday.
iPhoto is one of the few apps I often take into full-screen mode, and so obviously I noticed today that they've kindly taken away the full-screen arrows in the top right-hand corner of the window in Yosemite.
Posting a question about that in Support revealed the 'new improved' way to go full-screen, which is to click on the green traffic light in the top left-hand corner of the window.
Fair enough, but how do I get my iPhoto window back to the size it was before I went full-screen? I tried clicking the green-button again, but that insists on the window being what I call 'maximised', ie. spread across the entire width of my desktop. I want to snap from full-screen back to the window size I had before going full screen.
The arrows in the top right-hand corner used to do that perfectly well, but they're not there any more so I'm having to resort to laboriously re-sizing my window each time, which is far from ideal.
Anyone able to advise me please?

Do we know if it is iPhoto-specific, or do all app windows behave in this way?
Actually, I suppose I could find that out for myself...

Error during the adobe form activation

hi all,
when am i activate the adobe form layout (Zlayout) , the following error message occured:
Error during activation
Message no. EU837
but iam not found any syntax error in layout development.
please help in this it very urgent....
Thanks,
Ramana

Hello Sir,
You need to apply the note 1047930, After this the problem should be resolved.
Thanks and Regards,
Deepak...

Form size increases when ADOBE Form moved from DEV to QA

Hi Gurus,
I have a large PDF ADOBE Form developed in DEV but when I moved this Form to QA environment, I noticed the file size has been Doubled(from 2MB to 4MB). Please note that, this is not an interative Form. Can someone tell me why and how can I fix it. We are emailing this form and 4MB is too large.
Thanks for your help,
Cyrus
Edited by: Cyrus Arjomandi on Nov 2, 2010 8:48 PM

Well, after discussing it with SAP, we are still in the dark and don't know why this problem only occurs to one of our PDF outputs. however, the following might help you to cut some times looking for answers.
1-It started after we changed the values in the Layout properties. We are not sure in which tab. We guess it was "PREVIEW"
2-After this, every time we made any changes to the Layout, the size was doubled until it became a major problem
3-We contacted SAP for this issue and the respond was "Please refer to following note for installation/patches:
1176858 / 1356871"
4-We were also asked by ADOBE to download a zip file called "COMMON.zip" and install the COMMON file on our ADS server
5-After installing the COMMON file on our server we were asked to run the ABAP program "FP_CHK_REPORT" on the FORM.
6-The suggestion was to only check mark only common-001when running the ABAP, but we check marked all after found no results with only COMMON-001.
7- check out this link. http://help.sap.com/saphelp_nw70/helpdata/en/44/35f874b9d74901e10000000a1553f7/content.htm
8-we did all of the above but we had partial success, it reduced the size fro 7MB to 4MB
9-Finally, we created the same Form from ground up without touching the Layout properties and the size turned up to be around 100KB.
Cyrus Arjomandi
GETSAP at gmail
ABAP Consultant specialized in technical ABAP in "SRM, ADOBE Forms, ECC logistics"
Edited by: Cyrus Arjomandi on Dec 23, 2010 8:53 PM

Activating Full window size Adobe forms

Similar Messages

Maybe you are looking for