Ad Hoc Package Extraction Failure

Dear developers, I recently upgraded to the newest version of Air 3.8.  I am trying to test a new version of my app ad hoc (for iOS), but I keep getting a package extraction failure.
I am using Flash Pro cs6.  The ipad is connected via USB to the computer and I am publishing via ad hoc.  I never had this problem prior to using the Air 3.7.
I am concerned as I uploaded this version to Itunes Connect and now am not confident it will work (it is currently waiting for review).
Any help would be appreciated.
Justin

Alright, if someone comes across this error what worked for me is simply turning off ITUNES.  I never had to do this in the past for 3.7 ad hoc builds, but for 3.8 ad hoc builds, my ad hoc would only directly install if ITUNES is not running in the background (ITUNES on my computer, not on the IPAD).
Justin

Similar Messages

  • When to use ad-hoc package

    Hi all,
    sounds like a stupid question, but we have two different opinions in our team. Suppose you only have one package in your level (no need to set up different packages). Will you typically use the ad-hoc, or will you use one self-created one without restrictions?
    What are the pros and cons.
    Many thanks in advance,
    Andreas

    Hi,
    Extracted from help.sap.com
    Ad Hoc Planning Package
    The system automatically creates an ad hoc planning package for each planning level. This ad hoc package can be used as a user-defined planning package. However, you should note the following points:
    ·        The settings that you make for an ad hoc package are valid only for the duration of the current planning session. When you end the planning session, the settings for the ad hoc package are reset.
    This makes the ad hoc package perfect if you want to display or edit explorative data without having to create permanent planning objects in order to do so. For the last purpose (for example for the delimitation of certain planning areas for recurring tasks), do not use the ad hoc package but create your own permanent package.
    ·        The ad hoc planning package is not locked and can, therefore, be changed simultaneously by all users. For the duration of the planning session, every user has an individual view of the ad hoc package, independent of the settings that other users make in it.
    ·        The ad hoc planning package cannot be deleted from the planning level.
    Cheers,
    Gim

  • SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

    Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
    I’ve tried several ways to fix these issues with no success.
    I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
    WHEN OPENING BIDS:
    I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
    . They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
    ONCE BIDS IS OPEN:
    No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
    TITLE: Microsoft Visual Studio
    There were errors while the package was being loaded.
    The package might be corrupted.
    See the Error List for details.
    BUTTONS:
    OK
    . . . and these errors in the Error List at the bottom of the IDE:
    Error      1             
    Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
    for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx   
    1               
    1             
    Error      2             
    Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". 
            Package.dtsx    
    0             
    0             
    Error      3             
    Validation error. Execute SQL Task : There were errors during task validation. 
       Package.dtsx    
    0             
    0               
    Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
    The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
    Microsoft.SqlServer.SqlCEDest.dll
    Microsoft.SqlServer.Management.CollectorTasks.dll
    Microsoft.SqlServer.SQLTask.dll
    System.Data.SqlServerCe.dll
    Microsoft.Synchronization.Data.SqlServerCe.dll
    (above dll repeated at bottom of message)
    After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
    as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
    If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
    items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
    In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
    and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
    out either).
    After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
    files or information you may require.
    CBS

    try: Devenv.exe /ResetSettings
    http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
    Or try this (it's for 2005, but maybe it works for 2008 aswell):
    http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
    or try
    http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
    "You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files.  I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
    without warning"
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • Error: Component failed to run due to a Object Package scheduling failure

    Hi,
    BusinessObjects XI R2 SP 5, FP 5.1
    I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
    When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
    I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

    Sorry posted on the wrong section...
    Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

  • Satellite Pro A10: Extraction failure error occurs while recovering procedure

    Im trying to run the recovery discs on my Satellite Pro A10 but after 20 second of trying to install recovery disc 1 screen gose black and message in corner says extraction failure.
    Can you help me please?

    Did you try to format and to delete whole partitions on the HDD before performing the installation from the recovery CD???
    Something similar happened to me. I was not able to install the OS from the Recovery CD.
    I have simply used the original Windows CD and have formatted the whole HDD.
    After this procedure the Recovery CD installation has worked.

  • Package Load Failure message in VS 2005 and Error: WIJ 20002

    After installing BusinessObjects Enterprise XI 3.1 .NET SDK when ever I open any project in VS 2005 I get the error message (the same happened on other system as well)
    Package Load Failure
    Package 'BusinessObjects.Enterprise.Vsip.BOEVsPackage, BOEVsPackage, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=... has failed to load properly (GUID = {...}). Please contact package vendor for assistance. Application restart is recommended, due to possible environment corruption. Would you like to disable loading this package in the future? You may use 'devenv /resetskippkgs' to re-enable package loading.
    I did try 'devenv /resetskippkgs' but still get this error. Any idea reagarding this.
    Next issue using the code sample provided in the site to create webi document by passing the universe id gives error message :
    "The Web Intelligence Java Report Panel cannot connect to the server. close the report panel and try to connect again or see your BO Administrator. (Error: WIJ 20002)."
    The Java version I have is 6 and I checked the Universe is not locked.
    Need help to identify the cause for both errors.

    Try the following as posted on another forum:
    Two solutions: 
    1.  -Go in to the Tools menu in .NET, and choose Import and Export Settings.
        - From the dialogue box, choose Reset All Settings and follow the steps
    2. If you have installed VS.NET to a drive other than the C drive, copy all files from the folder C:\Program Files\Microsoft Visual Studio 8\Common7\IDE to the same folder on the drive where .NET is installed, ie :
    D:\Program Files\Microsoft Visual Studio 8\Common7\IDE
    Regards,
    Jonathan

  • Package Load Failure VS 2008 Architect & 11.1.0.6.20

    I have a virtual machine running Windows Server 2003, IIS, and Visual Studio 2008 Team Architect.
    When I try to install "ODAC 11.1.0.6.20 with Oracle Developer Tools for Visual Studio" I get an error "Could not start the OracleMTSRecoveryService service on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fassion." I hit "Ignore" and the installation completes.
    Then when I run Visual Studio and select "Run SQL*Plus Script" I get:
    Package Load Failure
    Package 'Oracle Develper Tools for Visual Studio .Net' has failed to load properly...
    I have uninstalled and reinstalled without the MTS Recovery Service and get the same error.
    Any suggestions on getting this to work?

    I started visual studio with logging turned on. Here are the results from the log file:
    <entry>
    <record>60</record>
    <time>2008/01/18 19:14:09.974</time>
    <type>Information</type>
    <source>Microsoft Visual Studio</source>
    <description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
    <guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
    </entry>
    <entry>
    <record>61</record>
    <time>2008/01/18 19:14:11.026</time>
    <type>Warning</type>
    <source>Microsoft Visual Studio Appid Stub</source>
    <description>CheckPackageSignature failed; invalid Package Load Key</description>
    <guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
    </entry>
    <entry>
    <record>62</record>
    <time>2008/01/18 19:14:11.056</time>
    <type>Information</type>
    <source>Microsoft Visual Studio</source>
    <description>Begin package load [Oracle Developer Tools for Visual Studio .NET]</description>
    <guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
    </entry>
    <entry>
    <record>63</record>
    <time>2008/01/18 19:14:16.273</time>
    <type>Error</type>
    <source>Microsoft Visual Studio</source>
    <description>SetSite failed for package [Oracle Developer Tools for Visual Studio .NET]</description>
    <guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
    <hr>80004005 - E_FAIL</hr>
    </entry>
    <entry>
    <record>64</record>
    <time>2008/01/18 19:14:16.313</time>
    <type>Error</type>
    <source>Microsoft Visual Studio</source>
    <description>End package load [Oracle Developer Tools for Visual Studio .NET]</description>
    <guid>{D601BB95-E404-4A8E-9F24-5C1A462426CE}</guid>
    <hr>80004005 - E_FAIL</hr>
    </entry>

  • Package Load Failure, no beta versions of anything

    Hi,
    I get a "Package Load Failure" when starting VS2008. I've tried everything I can
    possibly think of, including reading about the problem in this forum, but nothing
    helps. The installation has installed five different asseblies correctly (as far as
    I can see) in the GAC, two for Oracle.DataAccess, and one each for the others.
    To avoid problems, I made completely fresh install of Windows Vista Ultimate, then
    I installed all security updates from MS, then VS 2008, then ODT 1110620. No betas
    has been installed at any point.
    I got one error message during install of ODT, "The request to star the service
    OracleMTSRecoveryService has timed out", but I dont think that should matter for
    this problem.
    Are there any other things to try to get ODT to work? I would appreciate any help I can get.
    The guid in the error message when staring VS 2008 is "D601BB95-E404-4A8E-9F24-5C1A462426CE".
    Regards,
    Carl

    Hi
    I run the 'gacutil /l | findstr Oracle' and that result seemed OK. I post the output here:
    Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.Management.Omo, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.VsDevTools, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Policy.2.102.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    Policy.2.111.Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342, processorArchitecture=x86
    System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=x86
    Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.1.102.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.1.111.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.10.1.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.10.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    Policy.9.2.Oracle.DataAccess, Version=1.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342
    It is by the way VS 2008 (not 2005), if that makes any difference. I did not try to reregister the assemblies since they seemed OK (but my path to them are a bit different not c:\Oracle\Product, but c:\Oracle\Developer\Product because Developer is the users username (default with Oracle installer), but I did the 'devenv /setup' but that did not help.
    regards
    Carl

  • AIR for iOS application crash when deployed as Ad-Hoc package

    We have develop Adobe AIR application that uses Starling and Gunk DI.
    The applications works great in the simulator and when deploying it to a device from the development environment, we use IntelliJ.
    When we package the application as ad-hoc package and deploy it to iPad using TestFlight the application crash, and I mean iOS crash report, without throwing AS3 exception when we try to create any type that is derived from starling.display.Sprite using Gunk CI.
    The strange thing is that the AIR app crashes without exception.
    Thank you,
    Ido.

    Sorry, typo, I ment Gunk Dependency Injection.
    On Mon, May 26, 2014 at 1:00 AM, Anton Azarov <[email protected]>

  • TNS Package writer failure

    Hi,
    I set up a Data Guard like the following.
    production ships archives to Standby and Standby ships archives to standby 2 in different server, however it was working ok when the Database in 10.1.0.4 but when i did upgrade for the database to 10.2.0.4, the production keeps shipping archives to standby and apply them, but the standby stop shipping or have error sending archives to standby 2, and i am getting receive the following error TNS Package writer failure and I don't know how to fix this, i follow all what Oracle recommends to resolve this issue but still receiving this error and my standby 2 not up to date.
    O.S is windows server 2003
    Oracle version 10.2.0.4
    Any help is greatful.
    Thanks

    yes all the system upgraded correctly and the listerners are fine too.
    the problem is between standby and standby 2, the error is appear in standby only, and looks like the standby couldnt ship archive to standby and the standby try to reconnect to standby 2 and many time as it could until it gives up and try to ship the second archives
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[8]: Successfully opened standby log 1: 'D:\ORACLE\XXX\STDBY_REDO01.LOG'
    Sat Jan 09 13:51:59 2010
    ARC9: Standby redo logfile selected for thread 1 sequence 34273 for destination LOG_ARCHIVE_DEST_3
    Sat Jan 09 14:21:59 2010
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[8]: Successfully opened standby log 2: 'D:\ORACLE\XXX\STDBY_REDO02.LOG'
    Sat Jan 09 14:21:59 2010
    ARC1: Standby redo logfile selected for thread 1 sequence 34274 for destination LOG_ARCHIVE_DEST_3
    Sat Jan 09 14:52:00 2010
    ARC2: Attempting destination LOG_ARCHIVE_DEST_3 network reconnect (3135)
    ARC2: Destination LOG_ARCHIVE_DEST_3 network reconnect abandoned
    Sat Jan 09 14:52:00 2010
    Errors in file d:\oracle\admin\bdump\ubix_arc2_424.trc:
    ORA-03135: connection lost contact
    ARC2: Error 3135 Creating archive log file to 'standby2'
    Sat Jan 09 14:52:00 2010
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[8]: Successfully opened standby log 1: 'D:\ORACLE\XXX\STDBY_REDO01.LOG'
    Sat Jan 09 15:22:00 2010
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[8]: Successfully opened standby log 2: 'D:\ORACLE\XXX\STDBY_REDO02.LOG'
    Sat Jan 09 15:22:00 2010
    ARC3: Standby redo logfile selected for thread 1 sequence 34276 for destination LOG_ARCHIVE_DEST_3
    Sat Jan 09 15:52:01 2010
    Primary database is in MAXIMUM PERFORMANCE mode
    RFS[8]: Successfully opened standby log 1: 'D:\ORACLE\XXX\STDBY_REDO01.LOG'
    Sat Jan 09 15:52:01 2010
    ARC4: Standby redo logfile selected for thread 1 sequence 34277 for destination LOG_ARCHIVE_DEST_3
    and this is from the trace file:
    *** 2010-01-09 08:27:50.609 62692 kcrr.c
    ARC2: Error 1034 Creating archive log file to 'standby2'
    *** 2010-01-09 08:27:50.609 60970 kcrr.c
    kcrrfail: dest:3 err:1034 force:0 blast:1
    *** 2010-01-09 11:22:00.203
    Redo shipping client performing standby login
    *** 2010-01-09 11:22:00.359 66535 kcrr.c
    Logged on to standby successfully
    Client logon and security negotiation successful!
    *** 2010-01-09 14:52:00.187
    RFS network connection lost at host 'standby2'
    Error 3135 creating standby archive log file at host 'standby2'
    *** 2010-01-09 14:52:00.187 62692 kcrr.c
    ARC2: Attempting destination LOG_ARCHIVE_DEST_3 network reconnect (3135)
    *** 2010-01-09 14:52:00.187 62692 kcrr.c
    ARC2: Destination LOG_ARCHIVE_DEST_3 network reconnect abandoned
    ORA-03135: connection lost contact
    *** 2010-01-09 14:52:00.187 62692 kcrr.c
    ARC2: Error 3135 Creating archive log file to 'standby'
    *** 2010-01-09 14:52:00.187 60970 kcrr.c
    kcrrfail: dest:3 err:3135 force:0 blast:1

  • Data Extraction failure from DSO to Cube

    Hello Experts,
    The Data load to Cube( zfiar_c03) from DSO (zfiar_03) using a full
    update is failing throwing the error message"Incomplete update due to
    errors in single records ".We had deleted the failed request from
    infocube and loaded the the same req from psa by correcting or removing
    the # values but it failed again resulting in the same error.
    When we checked the previous successful requests which got loaded to
    cube from dso it also contains the # values , but the loading was
    successful.
    our BW reporting is seriously impacted due to the failure coz our
    collection,recievables..etc all business critical report is based on
    this cube.
    Request you all to help..
    thanks,
    Sapta

    Hi Sapta Jyothi,
                     I am not sure what the actual problem is. But, from my prior experience, I fell this is related to the Process chain configuration provided you are using process chains.
                     If  you are using a process chain , please check if there is any other failed step in the Process chain. If that is the case, even if the failure due to invalid entries is fixed the QM status of the load to the cube will not turn Green till the process chain status turns green or yellow. You can check from the details tab of the info-package load run and see if the process chain log step is red. If this is the case, then you will have to take action to see that other steps are completed succesfully. And also the Process chain in this case needs to be modelled in a way, such that, when a load to a cube fails the successive steps like creation of cube indeces should not be triggered.
    Thanks ,
    Nithin.

  • Server Package extractions

    We're just finishing a server and workstation roll out, and I've come back
    to this thorny issue once again. I'm starting a new thread as I suspect that
    the original from Feb 06 has fallen off most peoples news readers (then
    again perhaps not).
    A brief recap.... I want to be able to distriibute server patches out to our
    subscribers, and to have them run the extract at/between specific time, so I
    can tell the users that their server will be down between specific times,
    rather than a nebulous 3 or 4 hour period, depending on how busy the comms
    lines are with other things.
    > What I'd really like to be able to do is say...
    > Build it Now
    > Send it Now
    > Run it at the time I specify AND also run once only.
    Jared suggested this....
    >> How about this
    >> Build schedule is 6PM Tuesday
    >> Channel Schedule(send schedule) could be send now (sends after build has
    >> happened)
    >> Run time or extract time would be Wednesday at 8pm
    >> So the server reboot should happen between 8:30 and 9:pm I would say,
    >> depending on how fast your servers can extract the package.
    >> I am thinking there is more options too, but how does this sound?
    The problem is that there isn't (or I can't work out) a way to set the
    extraction time on the subscriber for a distribution. The only way there
    seems to be of specifing the extraction time is in the subscriber object,
    and that would make it a global setting for all packages that a server
    subscribes to. I have fiddled with setting up a 2nd subscriber object, but
    it doesn't seem to want to take... Probably a bad idea anyways...:)
    Marcus suggested
    >> create a channel with will never run.
    >> create a package with build never run
    >> override the send in the package to immidialty
    >> refresh distributor
    >> go into the ZSM webinterface
    >> go to your distribution, start the build
    >> if you select the build to be immidiat it would also work... but every
    >> refresh
    >> of the distributor would force a new build
    I've tried this a couple of times, and it doesn't seem to help (unless I am
    missing something). Using this method lets me manually start the build
    process, but I still have to wait for the package to build, and more
    importantly distribute, so we're back to the same issue with not really
    knowing when it will actually arrive at the remote site.
    The run once only I can do by checking for file dates/times in the
    requirements section when I build the CPK. Of course, this won't stop it
    distributing out multiple times, tho I can kinda simulate that by setting
    the maximum revisions to some high humber.
    Does anyone have an ideas how I can specify an extract time/schedule for a
    distribution?
    Graham

    On Tue, 24 Oct 2006 13:34:16 GMT, Graham Mitchell wrote:
    > Does anyone have an ideas how I can specify an extract time/schedule for a
    > distribution?
    I would think you should file an enhancement request for it, what you are
    mainly wanting to do is to overrule the extract schedule on the subscriber
    not only to extract now but also to a certain time.
    one workaround would probably to just copy the files over and than create a
    scheduled action to apply the patch..
    Marcus Breiden
    If you are asked to email me information please change -- to - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.edu-magic.net

  • Extraction failure

    Hi all,
    All the jobs scheduled on a daily basis have failed.
    have tested the rfc connection from sm59.
    all jobs show xx from 0 records( for eg. 58 from 0 records)
    the message with all jobs:
    =====
    Sending packages from OLTP to BW lead to errors
    Diagnosis
    No IDocs could be sent to the SAP BW using RFC.
    System response
    There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of the SAP BW.
    Further analysis:
    Check the TRFC log.
    You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
    Removing errors:
    If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
    ===============
    what can be the reason for failure?
    thanks,

    hi,
    Similar problem has occurred for me and it was that the authorization profile of R3 and BW for that particular user was incorrect, so see to it that they are same in both BW and R3 for that user.
    Kindly check : <b>OSS note 150315</b>
    and also refer :
    Sending packages from OLTP to BW lead to errors
    assign points if useful ***
    Thanks,
    Raj

  • Offline Extraction Failure

    I tried to do an offline extraction from a Sybase 12.5 server. The login that I used was not 'sa', but one with sa_role. The process failed with a lot of 'Can not find libsrv.ddl ...' messages. What and where is that ddl?
    The second question is why can't I change the source login id on the capture wizard from 'sa' to some user with sa_role? The standard procedure for a Sybase DBA is to create a couple of login's with sa_role and lock down the login 'sa'.

    I'm not sure of your sybase setup so I cannot comment on the libsrv.ddl question. I suppose, one point would be to check if you can bcp with any other user normally.
    The reason why we need a dba user role is to extract out the data dictionary from Sybase, which we load into the omwb repository. Right now, you can only use a differnt dba user by using the offline capture scripts. In the workbench this is configured as sa and cant be changed.

  • Package Load Failure ODT 11.1.06.20 production

    I have just downloaded the production release of ODT. I uninstalled ODT 11 beta 2.
    I installed ODT 11 prod without Oracle Services for Microsoft Transaction Server 11.1.6.0.
    Now I get this error when I want to create a new Oracle Database Project in VS 2005 SP1.
    VSIP: Package 'Oracle Developer Tools for Visual Studio .NET' has failed to load ( GUID = {D601BB95-E404-4A8E-9F24-5C1A462426CE} ).
    Please contact package vendor for assistance.
    I also get the same error when I want to connect to a Oracle server in the Server Explorer.
    I have tried the tips that were posted at the link below but they don't fix this problem. http://forums.oracle.com/forums/ann.jspa?annID=258
    Any help would be very much appreciated. Thank you.
    Fabian

    I found a fix for me. Maybe it works for other people too.
    3 dlls were not in my GAC.
    Oracle.Managment.Omo
    Oracle.VsDevTools
    Oracle.Web
    Added these manually.
    I also had to fix some errors in machine.config.
    Oracle install added this to machine.config
    <healthMonitoring configSource="Machine.Config.HealthMonitoring.config">
    <providers>
    <add name="OracleWebEventProvider" type="Oracle.Web.Management.OracleWebEventProvider, Oracle.Web, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342" connectionStringName="OraAspNetConString" buffer="true" bufferMode="OracleNotification" />
    </providers>
    </healthMonitoring>
    Because we store our health monitoring section in a separate file (i.e.
    Machine.Config.HealthMonitoring.config) we have now 2 providers section under healthmonitoring which VS 2005 doesnt' like. So I moved the Oracle item into our separate file and deleted the providers section so it looks like this now
    <healthMonitoring configSource="Machine.Config.HealthMonitoring.config">
    </healthMonitoring>
    One more thing. A connection string was missing in machine.config. Either the Oracle installer couldn't add it because our config files are encrypted or because we keep them in a separate config file just like for healthmonitoring.
    I added this to our connection string config file.
    <add name="OraAspNetConString" connectionString=" " />
    Now all works fine.

Maybe you are looking for