Adapter Type For R/3 Receiver

Hi All,
I have created a Communication Channel that represents the communication between a Thrid Party System and R/3, where R/3 is receiver.
Now the parameters I had entered initially for the Commnication Channel were:
Adapter Type : RFC
Transport Protocol : RFC
Message Protocol : RFC (XML)
Adapter Engine : Central Adapter Engine
Then I had entered the Target Details As:
RFC Server Type : SAP System
& Below I had mentioned the application server, the system number, authentication mode, and login details.
Now the client has requested me to remove all the hard coding (i.e. all the application server id, system number and login details) and instead use an RFC Destination, so that the interfaces will have no dependency and maintenance would be low, while the configuration is being transported from the development right upto production.
Now can anyone help me as to which Adapter Type am I to select for this, or how to go about it, so that I can enter the RFC Destination instead of entering system details. I guess it is possible if you select the Adapter Type as IDOC but I cannot select IDOC, for the simple reason, the receiver system is non SAP and is not sending the data in form of an IDOC.
Kindly Advise...
Thanks & Regards
Pablo
Edited by: Pablo Ghosh Roy on Dec 29, 2008 7:16 AM

Hi There,
Thanks for pointing out the mistake, the Receiver is Definitely the R/3 System and the Sender is Non SAP Third Party System.
So as per your suggestion, if I set the Adapter Type to be XI, then what kind of RFC Connection would have to be created in SM59, can it be of the type ABAP Connection(SM59), or anything specific.
Kindly Advise...
Thanks & Regards
Pablo

Similar Messages

Data Types for JDBC Sender/Receiver Adapter

HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,
Edited by: Amruth on Dec 4, 2008 6:11 AM

HI Nagarjuna,
If my understanding is correct, When you trigger the Idoc from R/3 it thrown the error in XI.
If you want to send the same Idoc then go to WE19 in R/3 system enter the same Idoc number and execute the scenaio. It send the Idoc to XI system, but the message number will change.
Regards
Goli Sridhar

Adapter type for inbound xml message XI3.0 SP10

Hi,
We are using XI3.0 SP10 and are about to set up a scenario where we will receive an xml to process. Up until now we have only received simple flatfiles to process.
My question is, can I use adapter type "File" to process this inbound xml file? And are there any special considerations I should be aware of, that is different from processing an textfile?
At the moment I have started to set it up as follows:
Adapter Type: File
Transport Protocol: FTP
Message Protocol: File Content Conversion
Adapter Engine: Integration Server
Transfer Mode: Binary
File type: Binary
Thanks,
Fredrik

Hello,
Yes you can but you don't need "File Content Conversion".
Choose "File" and well done.
Regards,
Chris

SOAP adapter Using XI 3.0 error: invalid content type for SOAP: TEXT/HTML

Hi All,
I have the scenario to send a message to proxy via SOAP adapter . My PI server is 7.3 and my BI application server also 7.3. I have created service interface in the ESR and created the ABAP proxy in the Application server. Im using the receiver SOAP adapter with message protocol as XI 3.0. Am running this scenario in the central adapter engine. (That is i didnt create integrated configuration). I am facing the issue in the receiver SOAP channel as 'invalid content type for SOAP: TEXT/HTML: 401 Unauthorized'. But i can able to login into the URL which is given in the channel using the username and password used in the channel.
Can you please let me know if any addtional settings need to be done in PI side.
Regards,
Ramalakshmi.G

Hi,
Thanks for your reply. I have done my scenario with the integration configuration. Still i am facing the same issue " SOAP: TEXT/HTML; HTTP 401 Unauthorized". I have given the correct URL, username and password. Is this enough to connect to the receiver integration server from AE. Any settings need to be do in the receiver ABAP system and PI system. If so please share the corressponding note for the same. What should be the role is assigned to the userid given in the channel.
I have used sproxy to create the proxy in the receiver ABAP system. In PI i am using the SOAP adapter with XI 3.0 ,message protocol to call to this proxy. I have not done any settings in any of the servers. Do i need to do any settings.
Regards,
Ramalakshmi.G

Trace level="1" type="T" -no interface action for sender or receiver found

Hi Experts,
I try to integrate PI and abap 7.0 using XI adapter (feel doubts about type).
RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ
http://cnh.com/XI/SDIIOC01/RCVR</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type
What could be the problem which I'm facing and how could I fix this
regards
nagendra

i understood its ur SAP XI to inbound proxy scenario?
Do the message in MONI of XI is showing correctly?
R u getting an error message in R3 moni?
Did u configure ur scenario correctly both at Xi n R3 using sproxy tcode.
chirag

Data types for Sender/receiver JDBC

HI experts,
I am very much confused how the data types shoudl be for the Sender/receiver for JDBC.
And is there any standard format where it should be used, or what is the strucutre to be used,.
Please let me know in clear and help me out in this regard,

refer these blogs for better informations on jdbc data types
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file%252bto%252bjdbc
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/jdbc%252b2%252bjdbc (for reciever JDBC)
JDBC Receiver Adapter -- Synchronous Select Step by Step

Getting invalid content type for SOAP: TEXT/HTML exception for Soap Adapter

I am trying to invoke Webservice using SOAP Receiver Adapter
but I am getting error
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML</SAP:AdditionalText>
Pls let me know
Regards

HI,
see
     Q: What character encoding is supported by the SOAP sender adapter?
           A: The SOAP sender adapter can accept any character encoding supported by the local JDK. When you are using a particular character encoding with content type text/xml, you must make sure that the encoding name given in the content type and in the XML declaration must be consistent. What makes this more complex is that the default values. The default encoding for "text/xml" is US-ASCII, whereas the default encoding for the XML declaration is UTF-8 or UTF-16. The following examples show several valid combinations of content-type and XML declartion:
           text/xml
           <?xml version='1.0' encoding='us-ascii'?>
           text/xml; charset='utf-8'
           <?xml version='1.0' encoding='utf-8'?>
           text/xml; charset='utf-8'
           no declaration
           text/xml; charset='iso-8859-1'
           <?xml version='1.0' encoding='iso-8859-1'?>
           application/xml
           <?xml version='1.0' encoding='iso-8859-1'?>
           The response message from the SOAP sender is normally encoded in UTF-8. If you want to change this encoding, for instance to iso-8859-1, you can supply the encoding information with the xmlenc variable in the request URL as in:
           http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c&xmlenc=iso-8859-1
           Related Questions "What character encoding is supported by the SOAP receiver adapter?"
Regards
Chilla

How to get the connected Adapter Object for a particular BDoc Type?

Hi All,
I have a scenario in which CRM system is connected to ERP system.
In SMW01 transaction, I can see one BDoc with BUS_TRANS_MSG as the BDoc Type in CRM.
Now, how do I get to know if this one BDoc is a SALESDOCUMENT or SALESCONTRACT.
Is there any way thorough which I can get to know the Adapter Object for this particular BDoc.
Regards,
Madhuri

Hi Madhuri,
Happy new year.
In Transaction : R3AC1.
You can observe the Linked BDOC for the adaptor objects. For example Sales docuemnt and Sales contrcat will have the same linked BDOC as "BUS_TRANS_MSG".
If you see an error in SMW01, you want to find whether it is salesdocument or contract.
1. Please take the Queue name from SMW01.
from the queue name you can find whether it is sales contract or sales document.
Queue name is customized in tables: SMOFQFIND.
I hope this helps you.
regards,
Sri...

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

Adapter Module for receiver IDOC adapter?

Hi,
I have a scenario where i need to do some custom logging in the receiver adapters. For all receiver file adapters, i have written an adapter module which fulfills this custom requirement but how will i do this in the receiver IDOC adapter as its on the ABAP stack? I cannot write a java adapter module for this.
Is there anyway by which i can write a ABAP adapter mosule and deploy it in the IDOC adapter? Or any other way to achive it. the scenario is such that i need to do the logging before the idoc is posted into R/3 system by the idoc adapter.
Please advice.
Regards,
Yash

Hi Chirag,
Yes i have seen that the module tab is disabled for idoc adapter. I have a fin interface where i need to split a incoming file into an idoc and a file. For this purpose i need to log how many records are received by each adapter and the sum of the line items for audit perspose.
any othr way to do it apart from doing it in message mapping. The req is to do in the adapter engine.

WSDL url for sender and receiver SOAP adapter

Dear Experts,
I am working on SOAP --> SAP PI --> SAP ECC synchronous scenario. That means I have to create 2 Cc for SOAP i.e. Sender as well as Receiver adapter. I am responsible for creating the Request as well as Response structure in SAP PI. The sender application team is dependent on me to get the WSDL file.
Please provide the suggestions on the below.
Sender SOAP adapter.
1. I will create the WSDL from Sender Aggreement. How to get the url and what is the navigation step? Should I provide the    same url to sender application team to call the service.
Receiver SOAP adapter:
2. In the receiver SOAP adapter , Should I have to get the web service parameter of the sender application. As mentioned , I am creating the response structure as well. That means I can not import the WSDL from the sender application. How to get target url in the receiver SOAP Cc.
I refered to the forum SOAP SENDER - test in soapui but its not clear.
Regards
Alice Rebecca
Edited by: Alice@xi on Dec 20, 2011 5:48 PM

Dear Bhaskar,
For synchronous scenario
                                                            Request
MS Application (SOAP)<--> SAP-PI <--
> SAP ECC.
                                                                                Response
I am creating the Request as well as Response structure in SAP-PI and its agrreement for both
the ways.
So for the MS appl team, I will give the WSDL url from the sender agreement to make the request to SAP-ECC.
Now for receiving the response from SAP ECC, from where I should find the value to enter in the target url of SOAP
receiver channel.
1.Should I take the target url value from the MS Application team?
2.How to know whether the MS Application or SAP ECC is hosting the web service?
Regards
Alice

IOException: invalid content type for SOAP: TEXT/ using Sender SOAP adapter

Hi all,
When I am using Sender SOAP adapter, i am getting (MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System) exception.
From my RWB I can see:
2009-05-25 16:18:39 Information The message was successfully retrieved from the call queue.
2009-05-25 16:18:39 Information The message status was set to DLNG.
2009-05-25 16:18:39 Error Failed to parse the XI system response.
2009-05-25 16:18:39 Error The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML using connection SOAP_http://sap.com/xi/XI/System.
2009-05-25 16:18:39 Error The message status was set to FAIL.
2009-05-25 16:18:39 Error Returning to application. Exception: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIMessage creation failed (inbound). Reason: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not parse XMBMessage. Reason: java.io.IOException: invalid content type for SOAP: TEXT/HTML
Please help if possible! Thanks!
Mayank

Hi,
Check in SLD your integration engine business system have the following
pipeline url : http://server:httpport/sap/xi/engine?type=entry
check Http port also
After that go to TCODE - SXMB_ADM - integrationn engine configuration and check if your server is configured as HUB with the same url or not.
Thanks
Kasturika Phukan

SOAP adapter error: invalid content type for SOAP: TEXT/HTML.

Dear SAP experts,
Need your help again here.
Currently, i am getting this specific error in my RWB logs.
The connection is from SAP XI going to Trading Partner via SOAP adapter.
The specific error is:
Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: invalid content type for SOAP: TEXT/HTML.
I've already searched on what is causing the issue and it seems majority of the information is that, the error might be due to incorrect/wrong URL that was set in the configurations in the SAP XI communication channel.
Can you confirm this one?
DO you have any thoughts on this error?
Please help.
Thank you very much!
Fred

Hi Freddiesan,
First of all, test your URL acessing it from SAP PI server's local browser to check firewall and router settings.
If it works, check these blogs:
Regards,
Rogério
Edited by: Rogério Tambellini on Jul 3, 2009 12:52 PM

How to create the Data Type for the receiver end?

Hello Expertise
I wanted to Create a Data type for Receiver end in PI.
Sender end is ECC.
Receiver end is SRM
Here's the Data type for Sender end as
Can anyone help to create the Data type for Receiver end i.e SRM.
Thanks in advance.
Regards
karan

Hi Karan,
Please don't call Sir, we are just trying to help each other.
Please go through below scenario's and check your configuration.
ABAP Client Proxy to ABAP Server Proxy Scenario - Process Integration - SCN Wiki
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?overridelayout=true
http://wiki.scn.sap.com/wiki/display/XI/Step-by-step+FTP+to+ABAP+Proxy
regards,
Harish

Adapter Type For R/3 Receiver

Similar Messages

Maybe you are looking for