Add a Date field (with an icon that brings up a calendar they can pick the date from) to the contact form in Muse.
Have to build a form outside of Muse because of not having this.
Hello Shivkumar,
I, though, want to enter a "date" in this additional field, hence feel that
Additional Data B needs to be updated with this customisation.
Can you please confirm whether this is the right path to take
Also whether there is any standard setting to configure this requirement?
Is some "development" work needed to map this requirement?
Please note any requirement of adding up custom fields at Sales order level can be achieved through the following User exits in the screens :-
1:- SAPMV45A8309, Sales Document Header - User Exit Header
2:- SAPMV45A8459, Sales doc. Item - User exit item
Please reach out to Technical consultant so that code can be placed in these user exit and kindly close the thread if you query is answered.
Regards,
Sarthak
PS : http://wiki.sdn.sap.com/wiki/display/ABAP/CustomerExits%28CMOD%29
Similar Messages
-
How do I share a color-coded Outlook calendar with others in my office that they can see the colors too?
Hi,
How do you color code the calendar items? From conditional formatting or from categories?
Please make sure the user has been given reviewer or higher calendar permission to view items colors in Outlook. About how to share calendar in Outlook, please refer to:
http://office.microsoft.com/en-001/outlook-help/share-an-outlook-calendar-with-other-people-HA010354420.aspx
Regards,
Winnie Liang
TechNet Community Support -
Can't seem to sync my phone with iCal because I get a message that says:No writable calendar. I tried the suggestions I found in Help including a Terminal command to no avail.
I can only suggest you now need to somehow link your mobile to sync with the new calendar 'On my Mac'.
I have a work Blackberry whose calendar I sync with an iCal calendar 'On my Mac' using a usb lead and the Blackberry Desktop Manager for Mac. This free piece of software from Blackberry, automatically starts up as soon as I connect the usb to the iMac and it then prompts me to select which calendar 'On the iMac', which is writable, that I want my Blackberry to sync to. -
The green PHONE icon has dropped from the bottom of the home screen and isn't among the icons that I have installed. I can get to it by searching but how do I get it back on the bottom of the home screen?
Reset home screen layout.
This is covered in the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software) -
I just tried to update my iPhone 4 and it said it was successful, but now I have a message (USB icon - arrow- iTunes icon) that is frozen? I have turned off the phone, unplugged USB and reconnected and closed out of iTunes and back in. Any suggestions?
Hello, Spedellen.
Thank you for visiting Apple Support Communities.
When experiencing issues restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
When I click on photos tab, I get a circular dashed loading icon that is perpetually there. It never loads the library. i dont even see the iphoto content! thx for your help!
I am certain too that it is possibly the 7.0.3 update. Have you tried restoring from backup? I am uncertain that might work but its worth a try.
If that doesn't work I suggest that you give feedback to Apple directly. The more about this problem, the quicker it will get resolved.
Here's the link: http://www.apple.com/feedback/ipodtouch.html
Best,
OrlaG -
How can I share my ical work calendar with my coworkers that are using google calendar?
How can I share my ical work calendar with my coworkers that are using google calendar?
You can only do this by syncing your calendar to an external server - MobileMe is designed for this but if you don't already have a MobileMe account you can't start one now.
If you do have a MobileMe account the method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/sharedcalendar.html#publicshare
If you don't, you could sync to Google Calendar (Google accounts are free) or wait for iCloud which should be out in a couple of months and will probably provide this sort of facility.
You might like to consider BusyCal which is like iCal Pro - similar to iCal but with extra facilities. It can sync calendars on a Lan and also between accounts on the same machine (you have to have fast user switching enabled).
There is a free trial available on their website: it's slightly cheaper from the Mac App Store. (I have no connection with this company). -
My Client is having a serious problem with the Contact Form Widget
My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later. -
I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as easily as someone with 50 projects. In other words, is there a way to make the form "expandable?"
Hi Ms Buckner,
Yes, you can do this with the Show/Hide "Skip" logic rules.
1. Suppose, for example, you have your first ten projects showing by default.
2. At the end of those fields, you would have a Yes/No question asking if the person wanted to add more projects.
3. If they answer "No", they move on to the next section/area/question/etc.
4. If they answer "Yes" you have the form display ten more project fields that you had already included, but you had hidden up to this point.
5. Repeat steps two, three, and four as often as needed. (It helps that you can copy and paste fields, including groups of questions, so you don't have to manually re-create them each time.)
It means you must anticipate the maximum number of times you want to provide project fields, but you've already done that, and you have to build the form with that maximum number, but only display smaller portions at a time until they have filled in all they need.
I hope that helps,
Brian -
Hi all,
Does anyone know how to capture the SP username of who is making submission of the data from an InfoPath 2010 form? I looking to avoid the user need to type extra information like username/ manager name, etc; and then use code behind to be doing validation
before to push that data to an sql server.
Any suggestion , book reference , link is acceptable
thanks in advance
CRISTINA& MICROSOFT ForumHi Cristina,
Please check the following article with using web service UserProfileService.asmx to get the current user profile in InfoPath code behind and use the validating event to do some complex validation, it should help.
http://blogs.msdn.com/b/infopath/archive/2007/03/07/get-the-user-profile-through-moss-web-services.aspx
http://codesupport.wordpress.com/2010/04/05/sharepoints-userprofileservices-getuserprofilebyname-method/
http://www.bizsupportonline.net/infopath2007/infopath-basics-3-ways-validate-data-infopath.htm
http://henry-chong.com/2010/12/infopath-validation-gotcha/
Thanks
Daniel Yang
TechNet Community Support -
When I got my new iPhone and was trying to switch everything over I accidentally set up a new icloud account with one email and had one on my old iphone with another account. Does anyone know how I can merge the two accounts?
You cannot merge Apple IDs but you can go to Settings > iCloud and 'Delete Account'. When prompted to turn off documents and data, choose the only option which is Delete from my iPhone, but on the other prompt for Contacts, Calendars, etc you can choose 'Keep on my iPhone' Then once the Account is Deleted form the iPhone, log back in with the correct Apple ID and choose Merge when prompted. This will merge your data from this iPhone with that iCloud account effectively putting your devices on the same account.
-
Saving the data from two info path forms in to a single list in share point 2010
Hi ,
I have two info path forms are in share point page FM 1 and FM 2.
In FM 1 I am getting data from lists by using drop down and casket drop down and FM 2 i need to enter manually after entering
i want to save both forms information(FM 1 & FM 2 ) in to a single list of share point 2010
If any knows the solution please reply me
Thanking You,
Arun DarlyHi，
Based on your description, my understanding is that you want to save the data from two info path forms in to a single list in share point 2010.
We can't save the data from two info path forms in to a single list, but we can
save the data from two info path forms in to a single library.
Open the FM 1 and FM 2 in Infopath(you have save it Locally once).
Publish the FM 1 and FM 2 as content types named FM 1 and FM 2.
Add the content types FM 1 and FM 2 into a document library, Then you can save the data
from two info path forms in to a single library.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Return data from Java servlet in form of JSON encoded parameters in Javascr
How to return data from Java servlet in form of JSON encoded parameters in Javascript handler function call?
The same is implemented in php as the following
echo "sT.handleAjaxResponse(";
echo json_encode($response);
echo ");";
How to do the same in Java servlet?
Thanks.With the rising popularity of JSON (especially with Ajax), support for it has started to appear in the Java community. I am not aware of any standardized approach yet, but expect it is likely we'll see that eventually. For now, you probably want to look at a third-party library such as the [JSON in Java Library|http://www.json.org/java/], Jettison, or [Java Tools for the JSON Format|http://jsontools.berlios.de/].
-
when making a phone call on my iphone,I can hear the person that I am calling but they can not hear my voice
My first new iphone4 was received and installed complete.
Nothing to hear when i was calling, only when I used loudspeaker.
complete reset and reprogrammed Iphone, same result.
Called Apple support and received a new Iphone4 next day.
Updated and programmed.
It works.
2 weeks ago My son's iphone4, same problem, could only call with loudspeaker??
Anyone an Idea. -
Problems with php script in the contact form
Hello, I am from the Czech Republic and I am not a coder. I have 2 problems with my php sript. I am using a simple php script from Paul Trani, see below.
Firstly the email adress - when someone inserts an email adress in this form [email protected] it is OK, but when someone writes an address for example [email protected] (this type of adress is very common in our country) the answer is "That is not a valid email address. Please return to the previous page and try again." I think the problem is the dot before the @.
Secondly diacritical marks - Since I am from the Czech Republic we use diacritical marks (for example š,č,ř,ž,á,í,é,ě) so instead of this letters a get ? or Å™ or Å¡ to my email.
I really do not know how to fix these problems.
Thank you for any help. Sorry for my English. Peter
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<META HTTP-EQUIV="refresh" content="0;URL=thankyou.html">
<title>Email Form</title>
</head>
<body>
<?php
$name=addslashes($_POST['name']);
$email=addslashes($_POST['email']);
$comments=addslashes($_POST['message']);
// you can specify which email you want your contact form to be emailed to here
$toemail = "[email protected]";
$subject = "From EcoStyleStudio.com";
$headers = "MIME-Version: 1.0\n"
."From: \"".$name."\" <".$email.">\n"
."Content-type: text/html; charset=iso-8859-1\n";
$body = "Name: ".$name."<br>\n"
."Email: ".$email."<br>\n"
."Comments:<br>\n"
.$comments;
if (!ereg("^[a-zA-Z0-9_]+@[a-zA-Z0-9\-]+\.[a-zA-Z0-9\-\.]+$", $email))
echo "That is not a valid email address. Please return to the"
." previous page and try again.";
exit;
mail($toemail, $subject, $body, $headers);
echo "Thanks for submitting your comments";
?>
</body>
</html>ereg() has been deprecated, it is recommended that you dont use it.
You want to look at this
http://www.php.net/manual/en/function.preg-match.php
Within this page I found this:
If you need to check for .com.br and .com.au and .uk and all the other crazy domain endings i found the following expression works well if you want to validate an email address. Its quite generous in what it will allow
<?php
$email_address = "phil.taylor@a_domain.tv";
if (preg_match("/^[^@]*@[^@]*\.[^@]*$/", $email_address)) {
return "E-mail address";
?>
Maybe you are looking for
-
I have an iphone 4 and want to pick the size of photo to attach to an email before it attaches. My phone used to let me do this but then last night, it stopped and now only seems to attach a full res pic. Any suggestions? Thanks
-
Unable to Create Invoice from iSupplier
I am unable to create invoice from isupplier module, the moment i click on create invoice "with a PO" or "without a PO" under finance Tab, i get this error "You cannot complete this task because you accessed this page using the browser's navigation b
-
Is there a way to export Captivate as wmv or avi?
-
[SOLVED] gimp can't open any files - probably an easy fix
I can't open any files such as .png's or .jpg's in gimp. How can I change this. I installed it via pacman. I don't know if this helps, but I'm running kde. Last edited by itsbrad212 (2010-02-04 01:25:16)
-
I created a website using iWeb. Now I want to edit the site using Contribute. After launching Contribute, When I connect to my website I see my photos. However when I click on edit, and the page downloads for editing, the photos are gone. What's happ