Add a new cell
add a new cell in a column before other cells that have content in them. In excell it is very easy to do.
In Excel you can add a cell to the left because the whole sheet is an endless number of cells. In Numbers the number cells is defined by the width and height of the table (columns and rows). If you could add just a cell to the left the would be a lone cell sticking outside of the table. So if you need to add a cell to the left you are adding a column to the left.
The shortcut (in Numbers 3, I'm not sure about earlier versions) is to click in the cell where the number you want to move to the right is, hold down the option key and hit the left arrow on your keyboard. You can also click on the column and add row before.
Similar Messages
-
How to create a new cell attribute and add adorner to the cell
Hi
I am relatively new to InDesign and wanted to do the following
I want to add a new boolean attribute to a selected table cell. When this attribute is set, I would want to draw one line vertical and one line across the selected cell ( kind of like a "Plus" sign over the cell). I am wondering how to go about doing this.
PS: I read the snippet snpManipulateTableStyle and can see how to change a cell style using existing attribute (kcellAttrFillColorBoss). However in my case, i want to create a entirely new boolean attribute and based on it being true or false, I would want to draw the adornment on the cell
Any help with this would be greatly appreciated..
thanks!
SamI would create the new site first, then promote the new domain controllers and add them to the site. You can do this during the dc promote process.
There's step by step guides already available for creating a site so I don't see any point reinventing one.
Here's one:
http://www.petri.co.il/create-active-directory-sites-windows-server.htm
You may have to adjust the site links part since it looks like Site 3 will only be linked to Site 1.
Of course, the IP addresses for the domain controllers in Site 3 have to be in the IP subnet configured for that site.
Using the example above, you'll of course have to enter the information that makes sense for your netwrok.
I doubt anyone will create a custom step by step for you using the information you provided (they'd also have to know your subnets for one thing) but then, who knows.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. -
Hello,
My vi is gathering data from a piece of machinery. At varrious points durring the process, my vi must create printable reports. I am using the report generation tool kit to do this. What I want to do is for every report generated durring the run, add it as a new worksheet in an Excell workbook. My excell template works fine for the initial master report and I can add new data to new worksheets. What I am having a problem figuring out is how do I add the new data to a new worksheet using an excel template? I have 5 different reports that need to be generated at different times with some more often than others. I would like all these reports to be in the
same master excel file. Thanks in advance
-Greg
Gregory Osenbach, CLA
FlukeHi Greg,
There is no built-in support in LabVIEW to add a new worksheet to an existing Excel report simply because this functionality does not exist in the Excel application itself.
My suggestion would be to open up the template you wish to use for the new worksheet. Copy the cells from the template and paste them into your new worksheet that you've created. Then close the original template and you have another copy of the template in which you can populate with data values.
I have attached an example program of how to Copy and Paste a Cell in Microsoft 97 Using ActiveX in LabVIEW to this post. Hope this helps!
Kileen C.
Applications Engineer
National Instruments
Attachments:
XL_cell_copy_and_paste.llb 76 KB -
How do I add a new row to an AbstractTableModel?
I'm having an issue with adding new data to a table row. Every row I add contains the same data which is always the last data I grabbed from my database. I'm not sure if my issue has to do with how I set up the data to be passed or the table itself or both... Any help would be appreciated. It seems like the tablemodel is holding the memory spot ArrayList I'm passing. If I have to set up an arraylist of arraylists, to pass how do I do that?
My output is always:
1,4,Laser,10,120,100
1,4,Laser,10,120,100
1,4,Laser,10,120,100
1,4,Laser,10,120,100
Desired output:
1,1,Beam,10,99,100
1,2,Canon,10,120,100
1,3,Missile,10,66,100
1,4,Laser,10,120,100
* Extract weaponIDs by hullType from weapon database
private void setWeapons(int hullType){
// equpModel is the tableModel
equipModel.clearTable();
Weapon tempWeapon = new Weapon();
ArrayList newData = new ArrayList();
for (Iterator <Weapon> i = dataBaseManager.weaponList.iterator(); i.hasNext(); ){
tempWeapon = i.next();
if (tempWeapon.weaponClass == hullType){
newData.add(0,1);
newData.add(1,tempWeapon.weaponID);
newData.add(2,tempWeapon.weaponName);
newData.add(3,tempWeapon.weaponCps);
newData.add(4,tempWeapon.weaponMass);
newData.add(5,tempWeapon.weaponCost);
equipModel.insertRow(newData);
}Here is a snipet from the table class
public class GenTableModel extends AbstractTableModel {
private ArrayList data; // Holds the table data
private String[] columnNames; // Holds the column names.
* Constructor: Initializes the table structure, including number of columns
* and column headings. Also initializes table data with default values.
* @param columnscolumns[] array of column titles.
* @param defaultvdefaultv array of default value objects, for each column.
* @param rowsrows number of rows initially.
public GenTableModel(String[] columns, Object[] defaultv, int rows) {
// Initialize number of columns and column headings
columnNames = new String[ columns.length ];
for(int i = 0; i < columns.length; i++) {
columnNames [ i ] = new String(columns [ i ]);
// Instantiate Data ArrayList, and fill it up with default values
data = new ArrayList();
for(int i = 0; i < rows; i++) {
ArrayList cols = new ArrayList();
for(int j = 0; j < columns.length; j++) {
cols.add(defaultv [ j ]);
data.add(cols);
* Adds a new row to the table.
* @param newrowArrayList new row data
public void insertRow(ArrayList newrow) {
data.add(newrow);
super.fireTableDataChanged();
* Clears the table data.
public void clearTable() {
data = new ArrayList();
super.fireTableDataChanged();
}Hi thanks again for responding
Here is the Initialization, including the panel and scrollpane it sits on.
// Table attempt
JPanel tablePanel = new JPanel(new BorderLayout());
tablePanel.setBounds(PANEL_X+2*PANEL_DISTANCE, PANEL_Y, PANEL_WIDTH+300, PANEL_HEIGHT);
title = BorderFactory.createTitledBorder(blackLine, "Table List");
tablePanel.setBorder(title);
// This is column tile plus one dummy initilization set.
String[] columnNames = {"DB", "ID", "Name", "CPS", "Energy", "Mass", "Cost"};
Object[] data = {new Integer(0),new Integer(0), "Empty", new Integer(0),
new Integer(0),new Integer(0),new Integer(0)};
// here is the GenTableModel creation
equipModel = new GenTableModel(columnNames, data, 1);
equipmentTable = new JTable(equipModel);
equipmentTable.setRowSelectionAllowed(true);
equipmentTable.setFillsViewportHeight(true);
equipmentTable.setColumnSelectionAllowed(false);
TableColumn column = null;
column = equipmentTable.getColumnModel().getColumn(0);
column.setPreferredWidth(20);
column = equipmentTable.getColumnModel().getColumn(1);
column.setPreferredWidth(20);
JScrollPane scrollPane = new JScrollPane(equipmentTable);
tablePanel.add(scrollPane);
add(tablePanel);
Here is the full code for GenTableModel. It is as you guessed.
public class GenTableModel extends AbstractTableModel {
private ArrayList data; // Holds the table data
private String[] columnNames; // Holds the column names.
public GenTableModel(String[] columns, Object[] defaultv, int rows) {
// Initialize number of columns and column headings
columnNames = new String[ columns.length ];
for(int i = 0; i < columns.length; i++) {
columnNames [ i ] = new String(columns [ i ]);
// Instantiate Data ArrayList, and fill it up with default values
data = new ArrayList();
for(int i = 0; i < rows; i++) {
ArrayList cols = new ArrayList();
for(int j = 0; j < columns.length; j++) {
cols.add(defaultv [ j ]);
data.add(cols);
public int getColumnCount() {
return columnNames.length;
public int getRowCount() {
return data.size();
public String getColumnName(int col) {
return columnNames [ col ];
public Object getValueAt(int row, int col) {
ArrayList colArrayList = (ArrayList) data.get(row);
return colArrayList.get(col);
public Class getColumnClass(int col) {
// If value at given cell is null, return default class-String
return getValueAt(0, col) == null ? String.class
: getValueAt(0, col).getClass();
public void setValueAt(Object obj, int row, int col) {
ArrayList colArrayList = (ArrayList) data.get(row);
colArrayList.set(col, obj);
public void insertRow(ArrayList newrow) {
data.add(newrow);
super.fireTableDataChanged();
public void deleteRow(int row) {
data.remove(row);
super.fireTableDataChanged();
public void deleteAfterSelectedRow(int row) {
int size = this.getRowCount();
int n = size - (row + 1);
for(int i = 1; i <= n; i++) {
data.remove(row + 1);
super.fireTableDataChanged();
public ArrayList getRow(int row) {
return (ArrayList) data.get(row);
public void updateRow(ArrayList updatedRow, int row) {
data.set(row, updatedRow);
super.fireTableDataChanged();
public void clearTable() {
data = new ArrayList();
super.fireTableDataChanged();
} -
Is there any object in labview that contains a list of data for the user to select (selection one at a time) or add a new data?
List and table controls -> listbox..is that what you are thinking of?
The listbox presents the user with a list of options, and you can set it to only accept one selection at a time...Adding new data to the list can not be done directly by the user but if you make e.g. a text control and a button you can programatically insert new objects described in the text box when the button is pressed...(see example).
If you need more than one column you have the multicolumn listbox. If you want the users to write new entries directly yu can use a table and read selected cells using it's selection start property to read what cell has been selected.
MTO
Attachments:
Listbox_example.vi 34 KB -
How can I add a new row in a JTable dynamically?
Dear Sir(s)
I want to add a new row in a Jtable as I press enter key the time focus is on the last cell of the row? pls helpTomDooley wrote:
Hello,
...I write directly to a cvs file ...my loop slows down to 0.2 Hz
Writing a series of 5 values to a file should not take so long. There is probably something wrong in the way you are saving your data. May be you should post a simplified version of your vi, so we could see how to improve your code.
CC
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Long shot... Can an entry in Calendar add a new line in Numbers?
I am a photographer. I am setting up a very simple simple Job tracking spreadsheet. Column A is Job number, column B is Client, column C is Date, etc... One line per job type of thing.
When I get a job I am often not at the computer so I enter it on my iPhone in the Calendar app. Is there a way I can add some sort of flag in that entry which will then open my spreadsheet and add a new line with a new sequential job number and the Client and Date?
I realize that is probably asking for a lot but I thought I would at least ask, just in case...
Thank you for any help!
BoThis is a proof-of-concept Applescript that logs events from Calendar into a Numbers spreadsheet. It expects a spreadsheet to be open, it doesn't put new events at the bottom of the table or add new rows if needed, it doesn't move the event from the Unlogged calendar to the Logged calendar. It doesn't do any error-checking (it would fail if you didn't have a calendar called "Unlogged Jobs"). But I think it has potential.
tell application "Calendar"
set event_count to (count events of calendar "Unlogged Jobs")
repeat with x from 1 to event_count
tell event x of calendar "Unlogged Jobs"
set {client, sdate, place} to {summary, start date, location}
end tell
tell application "Numbers"
tell document 1
tell sheet 1
tell table 1
tell column 2 to set value of cell (x + 1) to sdate
tell column 3 to set value of cell (x + 1) to client
tell column 4 to set value of cell (x + 1) to place
end tell
end tell
end tell
end tell
end repeat -
Do I have to add a new contact for each new phone number?
I just got my phone and I'm adding in my contact manually. I don't see multiple spots for multiple phone numbers for one person? Do I have add a new contact for each phone number a person has? (I.e. One for their home number, one for their work number, one for their cell number).
Thanks!No.
There is no reason to have a default number of phone number entries that may not all be used and the same for email addresses.
When manually entering contact info, after entering the first number for a contact, a new phone number entry is made available directly below. -
Numbers: How do I add a new "Term" with all the formulas included to the GPA calculator template?
I'm new to Numbers, and I am using the GPA calculator template. This includes 4 "terms" but I need 8. I have tried adding a new table but the formulas aren't included. How do I go about adding 4 new terms?
Click on one of the four tables that represent Terms and click on the little circle that is in the very top left of the table, this will highlight the entire table. Copy the table and paste a new one. Relabel the table Term 5.
In the GPA by term table, click in the cell that says Term 4, and add a new row; you can do this by holding Alt and pressing the down arrow. Label the new cell Term 5, and in cell A6 and put the formula =Term 5::C6 and in B6 put the formula =Term 5::D6.
Repeat for every term that you need. -
Skype won't let me add a new credit card.???
Can add a new card. Why??
Hello,
https://support.skype.com/en/faq/FA10486/how-do-i-update-my-credit-card-details
If my answer was useful, please click on "Accept as Solution" to help others, thank you
Si ma réponse vous a aidé merci de cliquer sur "Accepter comme solution"
Cela pourra surement aider d'autres personnes qui ont le même problème -
Unable to programmatically edit a new cell
Hi,
I need to programmatically insert a new row in the table and then programmatically edit certain cell(s) in that row. The edit just after the insert is not working. Could you please advise?
Thx
import javafx.application.Application;
import javafx.beans.property.SimpleStringProperty;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.collections.FXCollections;
import javafx.collections.ObservableList;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ButtonBuilder;
import javafx.scene.control.TableCell;
import javafx.scene.control.TableColumn;
import javafx.scene.control.TableColumnBuilder;
import javafx.scene.control.TableView;
import javafx.scene.control.TableViewBuilder;
import javafx.scene.control.TextField;
import javafx.scene.control.TextFieldBuilder;
import javafx.scene.control.cell.PropertyValueFactory;
import javafx.scene.layout.VBox;
import javafx.scene.layout.VBoxBuilder;
import javafx.stage.Stage;
import javafx.util.Callback;
public class ProgramaticEditTableViewApplication extends Application {
public ProgramaticEditTableViewApplication() {
public static void main(String[] args) {
launch(args);
@Override
public void start(Stage stage) throws Exception {
ObservableList<Person> data = FXCollections.observableArrayList(new Person("John"));
final TableColumn<Person, String> firstNameCol = TableColumnBuilder.<Person, String>create().text("First Name").cellValueFactory(new PropertyValueFactory<Person, String>("firstName")).minWidth(100).build();
firstNameCol.setCellFactory(new Callback<TableColumn<Person, String>, TableCell<Person, String>>() {
@Override
public TableCell<Person, String> call(TableColumn<Person, String> tablecolumn) {
return new EditingCell();
final TableView<Person> table = TableViewBuilder.<Person>create().editable(true).items(data).build();
table.getColumns().addAll(firstNameCol);
Button addAndEditBtn = ButtonBuilder.create().text("Add&Edit").onAction(new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent actionEvent) {
Person newPerson = new Person("new");
table.getItems().add(newPerson);
table.edit(0, firstNameCol);
}).build();
VBox root = VBoxBuilder.create().children(table, addAndEditBtn).build();
Scene scene = new Scene(root, 400, 400);
stage.setScene(scene);
stage.show();
class Person {
private final SimpleStringProperty firstName;
private Person(String fName) {
this.firstName = new SimpleStringProperty(fName);
public String getFirstName() {
return firstName.get();
public void setFirstName(String fName) {
firstName.set(fName);
class EditingCell extends TableCell<Person, String> {
private TextField textField;
public EditingCell() {
@Override
public void startEdit() {
super.startEdit();
createTextField();
setText(null);
setGraphic(textField);
textField.selectAll();
@Override
public void cancelEdit() {
super.cancelEdit();
setText((String) getItem());
setGraphic(null);
@Override
public void updateItem(String item, boolean empty) {
super.updateItem(item, empty);
if (empty) {
setText(null);
setGraphic(null);
} else {
if (isEditing()) {
if (textField != null) {
textField.setText(getString());
setText(null);
setGraphic(textField);
} else {
setText(getString());
setGraphic(null);
private TextField createTextField() {
if (textField == null) {
textField = TextFieldBuilder.create().text(getString()).minWidth(this.getWidth() - (this.getGraphicTextGap() * 2)).build();
textField.focusedProperty().addListener(new ChangeListener<Boolean>() {
@Override
public void changed(ObservableValue<? extends Boolean> observableValue, Boolean arg1, Boolean arg2) {
if (!arg2) {
commitEdit(textField.getText());
return textField;
private String getString() {
return (getItem() == null) ? "" : getItem().toString();
} Thx,
Edited by: 891575 on Aug 31, 2012 9:11 AM
Edited by: 891575 on Sep 3, 2012 4:11 AMHi,
I tried nothing change
Let me re-explain my issue:
I have a table control and an "Add&Edit" button. When the user clicks on the "Add&Edit" button I need to add a new empty row to the table then changing the state of the new added cell to editable(showing a textarea and giving the user the ability to directly type text)
The add is working fine but the table.edit(...) call just after the add is not working.
Note that if the table.edit(...) isn't called just after the add it is working fine
Any idea why the edit is not working if I call it just after the add:
data.add(newPerson);
table.edit(0, firstNameCol);Thx
Edited by: 891575 on Sep 3, 2012 4:12 AM -
How do I add my new lapttop to my family iTunes? I downloaded music, but cannot play it
How do I add my new lap top to my family iTunes? I downloaded music, but cannot play it on my laptop
There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them: -
TS1363 How can i update my old ipod and add my new one.
I have had an older ipod nano and i just recently got a new one. How can i add my new ipod nano to my current itunes account or do i have to have a whole new one? If i do have to have a new account how can i get my songs that i have already purchased to the new nano? I am so confused.
Connect the iPod nano to the computer the exact same way you set up the old one. You don't need to create another Apple ID, iTunes Store account, or iTunes library.
(98196) -
How to add a new view in Factsheet to collect data from R3
Hi Experts,
I need to add a new view in Account Factsheet called 'Open Delivery data'
which will collect the delivery data from R3 system.
As I know we have two Function Modules (at CRM) 'CRMT_ERP_FACT_SHEET_RETRIEVE'
(at R3) 'CRM_CCKPT_EXPORTSUMMARY'
All We need to do is create view which calls the data from R3 Via these modules.
How should I proceed.
Is this relevent steps :-
http://wiki.sdn.sap.com/wiki/display/CRM/Howtodisplayaz-tableinanassignmentblock
Regards,
RamHi Sandeep,
To add a new currency in Metadata, just add in Currencies dimension, and to add in Data form-just send the script what you are using as of now for rest of the currencies, or follow the same steps as specified above. or just add the script A#CLORATE.w#Periodic.C2#XYZ in rows of your data form (where XYZ- is the new currency).
To add a new location in FDM login to FDM web client- click on Metadata--> locations and select the Controls review location where you want to add the data load location, right click and add the new location. -
I am unable to add a new printer using the printer setup utility in system prefs.
I am logged in as Administrator
I am unable to add a new printer through the "add printer" dialogue in the printing preferences of any of my applications.
Why can't I detect them somehow and re-add them?Welcome to the Discussions Westar,
Just a few questions to start out:
Have you tried to Repair Permissions with Disk Utilities found in /Applications/Utilities?
Have you done any other repair/troubleshooting?
Were these printers already working with your system?
What is the make/model of the printer(s)?
Maybe you are looking for
-
I keep getting error 0xE8000068 ipod error, any ideas of what i should do?
i keep getting this error everytime i sync my ipod touch 3g to my computer. i have windows vista and i keep turning the ipod on/off, let it charge fully and used different usb ports. idk what else to do. any ideas?
-
SBO mailer working fine but attachment is not coming
Dear All We have configured the sbo mailer and mails are coming accordingly also, but attachments are missing in mails. *** SAP Business One Client Log *** WaitForSingleObject has finished with return value:0 SAP Business One Client return code:0 Dis
-
Is it possible to call a CMD or VBS within MAXL? Need script help
Hello, I have a CMD script that uses MAXL to execute Essbase backups, the details of which are located in a txt file. That works fine, and I have the logs being sent to a folder. What I am trying to accomplish is AFTER it is finished running the back
-
Problem in extracting from the import transport set
i am exporting all of the major page groups and providers from my source box to the target machine. both are using the same version database, app server and portal version 904. for one of the biggest provider, i created transport sets in the export s
-
Choosing that option will always end-up in extending my wireless network. What I want to achieve is to just add my AE to the existing WIFI network and to use it for local access like AirPlay or Printing. No other client e.g. iPhone, iPad etc. should