Add a new folder item in existing folder

Hi
All when i add a new folder item in an existing form
and when i add some new controls with in this folder(tab) all controls are see the existing folder i want
these control is see only this new folder
plz help me
Thanks & Regards
Mohd Shahid

Hi Sha
I don't understand fully, but what i think you are saying is that you want to add a item, but to a specific tab.
To do that, when you add your item, you must also do the following in addition to it's height,width,ect
oitem.FromPane = 2
oitem.ToPane = 2
this say which pane/folder it will show on. If both are zero it will show on all tabs. If like above it will show on 1 tab.
Hope this helps

Similar Messages

Idoc Type to add a new line item to existing Inbound delivery

Hi Friends,
we have one requirement.
In the system Inbound delivery is created through Idoc. Once the inbound delivery is created, we need to change that inbound delivery by adding a new line item to that inbound delivery where the line item belongs to another PO. Means, I have an existing inbound delivery number for a PO having one line item. Now I want to add another line item into the inbound delivery for another PO. I have created the inbound delivery through Idoc using the idoc type DESADV. Now I want to change the inbound delivery for adding the line item. Can anybody please tell me which idoc type should I use for this above highlighted requirement?
Thanks & Regards
Satya

Hi.
I have one PO 4500000001 for which I have created the inbound delivery 180000001. This inbound delivery has been created through an IDOC. I have another PO 4500000002 having one line item. Now i want to add another line item into the inbound delivery 180000001 for the PO 4500000002 as second line item. To add a second line item to the existing inbound delivery, which IDOC type should I use.
Hope it clarifies the requriement.
Thanks & Regards
Satya

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder?

When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!

I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension.

Add new line item in existing outbound delivery

Hi,
I am trying to add new line item in existing outbound delivery with material number and quantity.
for this i tried BAPI_OUTB_DELIVERY_CHANGE and LE_MOB_DELIVERY_UPDATE.
but both fm doesn't work and this will not add new line in that delivery.
please help me how can i add new line item in delivery.
I hope someone will help me........plz
Thanks

This kind of question is about to become a FAQ, I think....search the forum for similar questions.

Every time I try to add a new video to my photo folder...iTunes says it's experiencing a problem and then it crashes and shuts down. What can I do to add video to my photo folders?

Every time I try to add a new video to my photo folder...iTunes says it's experiencing a problem and then it crashes and shuts down. What can I do to add video to my photo folders?

Hi mterry1723, one solution that might be worth trying is this:
- Close iTunes, if it's open
- Open Safari and got to 'Preferences'
- Select 'Security' on the top
- Untick all the security options in the menu
- Click the 'Show Cookies' button and look for all the 'apple' entries in the left-hand column.
- Highlight them (select them collectively) and press 'Remove'
- Now open iTunes and buy the song as usual.
- You may be asked to do the same security process as before, so do as asked.
- Hopefully, the security check will now have accepted your answers and start downloading the song as normal.
Remember to re-tick all the required security options you had just un-ticked in Safari preferences. You don't need to bother about opening the cookies again.
I hope this has worked for you and my profoundest apologies if it has not. Worth a go, though!
I did see this thread: https://discussions.apple.com/message/18259935#18259935 which may be of more help, mainly the last entry by 'c2boyd'
Message was edited by: Bongomal

How to add a new line item to a Purchase Requisition number

Hello All,
Can anyone please provide me with some FM or BAPI to add a new line item to an existing Purchase Requisition number.
Can it be done using BAPI_REQUISITION_CHANGE; if yes, then how do I pass the parameters into the BAPI tables..?
Useful pointers would be appreciated...!!
Thanks & Regards,
Tarun Gambhir

@Gautham,
Thanks for the quick reply.
I want to update the table EBAN, so should I use the parameter table XEBAN to put in the new line item and then execute..
Also to fill up this table I need to pass certain value, so can I use BAPI_REQUISITON_GETDETAIL and pass the same details as found from the same BAPI and create a new line item...
Regards,
Tarun Gambhir

Can we add a new attachment to an existing SC from any other custom page in SoCo PO View

Hi Experts,
Need your expert advice on the below requirement.
We have created a custom view in SoCo PO page. There we have a New custom view called Notes&attachement.which contains same value from Notes & attachment of Shopping Cart.
We are updating existing Notes of SC by FM 'bbp_pd_sc_update' and same is reflected in SC of same item guid & same header guid.
Similarly trying to add a new Attachment to already existing attachment. New attachment is reflected in custom page and the describe link is working perfectly. but if come out of SoCo page , lets say in SC the new added attachment is shown but display_url,phio_size etc are not stored properly in DB.
in bbp_pd transaction every thing looks same for new and existing attachment. we are using same FM 'BBP_PD_SC_UPDATE' by passing new internal table of attachment in import statement. Even 'BBP_PROC_DOC_UPADTE' has same result that is attachment is partially updated.
Suppose, SC has one attachment at the time of creation. then adding a new attachment in custom view of SoCo PO page then every thing works fine in SoCo PO page but out of that SoCo PO or in SC the newly added attachment is not properly updated.
I have added mime_type,phio_size,disp_url,file_name,file_ext,ev_content of new attachment in existing attachment internal table and calling above FM for update.
Can we add new attachment outside SC to existing SC ? if yes , then how?
Thanks,
Partha

Hi Partha,
Please post this query in the category: SAP SRM. Your post currently shows up on the forum - SRM User Interface Add-on. As your query is not related to the new ad-on, you might not get as many responses in this forum as you would have if you had posted the query in the general SRM forum (http://scn.sap.com/community/srm).
Hope this helps
Cheers,
Yateesh

Inserting new line item into existing delivery using BAPI

Hi
can you send me the code for inserting new line item into existing delivery either using BAPI or
Function module.
We are using SAP 4.7 version

Hi Sreekanth,
Refer to this links
New item for outbound delivery via FM/BAPI?
/message/3976349#3976349 [original link is broken]
BAPI_OUTB_DELIVERY_CHANGE Help - Add new line item
hope it is useful to you.
Regards!

Add a new LOV item to a seed Iprocurement Page

Dear Forum,
I am relatively new with OA Framework and have a query.
In IProcurement-> Preferences Page -> Iproc Preferences, has many profiles that can be set to have a default value. I need to do the following add a NEW LOV item in the Delivery Billing region (DeliveryBillingDefaultsRN) on the existing page.
I found the Page to be in $ICX_TOP/mds/profiles/webui/MYProfilePG.xml.
The VO used by the page is oracle.apps.icx.profile.server.ProfileValuesVO
This VO does not contain the attribute I need to add.
1) What do I need to do to add this new item on this region ?
2) Would The LoV would need to be linked to another 'new ' VO ? How does it all work ?
If it is a new VO for 2) , to which AM do I need to attach it to ?
I did manage to create a new item via personalization, but this needs to be linked to a VO, would this be the extend ProfileValuesVO or the VO for the new lov ?
Some detailed steps in the right direction would help. I have read the dev guide, ch9 etc but am a bit confused.
Many Thanks
Shanky
Thanks
Gagan

Please go through the Extension chapter of Jdev guide and the OAF Personalization guide. There you will find enough detail. You can also find threads with discussion on the similar requirements,
--Shiv

How can I add a new line item for production order?

HI all,
How can I add a new line item for production order through BAPI/FM? Thanks in advance.

Hi Mil,
Unfortunetly SAP is not in front of me.
But if possible go to BAPI transaction , check for any production order's bapi for CHANGE purpose. Where you will be able to add your new line.
Reward if useful!

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Add a new field to an existing Condition table

How can I add a new field to an existing condition table?
I have table 971 and I want to add INCOTERMS (INCO1) to this existing table but do not see how to add it.
Thanks

Hi Vicky,
I dont think you can add new fields to the condition table once you have activated the condition table.
SAP says you can only make limited changes to the condition table, like changing the description, fast entry screen, header and footer fields, but not able to add new fields to the table, and I think that is the correct approch or else for the same table you will have two sets of condition records.
Please refer to the below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/de/7a8534c960a134e10000009b38f83b/frameset.htm
What you can do is create a new condition table with additional field and assign this table before the currently used table in the access sequence.
Hope this helps.
Regards
Raj

Add a new table to an existing Print Layout Designer report

Is it possible to add a new table to an existing Print Layout Designer report? For example, in the Production Order there is a Sales Order field (which is displayed on the report), I would like to display some information from UDFs found on the Sales Order, but when I add a Database Field to the report the Sales Order tables does not appear in the list (OWOR).

Hi
It is possible provided there is a relationship which exists between two tables.
You can add a Database field. Goto the Properties and selct Content Tab.
Now in the Table dropdown, hold the Alt Key and click. This displays all the tables in B1. After selecting the Table, you can select the related Column.
Remember there should be a relationship which exists between this column and existing columns.
Because PLD works completely on Joins to my understanding

How to add a new field to an existing Generic Search result list?

Good day,
I'm new to the concepts of the Generic Search Framework. I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C". This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
From the *modification\generic-searchbackend-config.xml file, the existing
<h4><property-group name="billing_resultlist_B2B_R3">
<property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
<property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
<property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
<property name="CURRENCY" type="hidden" />
<property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
<property name="PAYERS_GUID" type="hidden" />
<property name="SD_DOC_CAT" type="hidden" />
<property name="OBJECTS_ORIGIN" type="hidden" />
</property-group>
</h4>
I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework. I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
I would greatly appreciate any help.
Thanks,
_kevin

Hi Kevin,
this means you are working in this section of the generic-searchbackend-config.xml
             <property-group name="SearchCriteria_B2B_Billing"
                             useSearchRequestMemory="true">
Below this property
                <property name="IRT_BDH_BILL_TYPE"
                          type="box"
                          entityType="BEART_BILL_TYPE"
                          tokenType="EXP"
                          requestParameterName="rc_documenttypes"
                          label="gs.att.lbl.doc.type"
                          UIJScriptOnChange="GSloadNewPageR3(this);">
                    <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>
                    <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                    <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                    <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                    <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                    <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5" default="true"/>
                    <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" />
                    <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                    <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                </property>
please try adding this new property
                <property name="DOCUMENT_STATUS(1)"
                          entityType="CL_CRM_REPORT_SET_STATUS"
                          tokenType="RAN"
                          type="hidden"
                          requestParameterName="rc_status_head1" value="C" />
This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !
Philipp Koock
SAP CRM Web Channel Consultant
http://www.koock.net

How to add a new line item when i click on UPDATE in orderpage B2B webshop?

Hi Gurus,
I need to add a new line item based on some condition when i click on update in the order page in b2b web shop. Is there any way to pass some parameters to the BADI crm_isa_basket_items and create a new line item when i update? If so can you please tell the parameters that i need to pass to the badi.
Any help will be highly appreciated!!!!!
Thanks in advance,
Lakshman.

You can put condition when you call java script function while clicking on "update" button.
On order.jsp update button call "submit_refresh()" java script function. You can check your condition over here.
You can find this function in "orderTools.js" file.
And when you enter item in last line on order page and click on the update button it will automatically add new empty lines on your order page as per your selected new line items from drop down box.
Or may be you can call your custome action class when you click on update to check particular condition.
I hope it will help you.
Thanks and Regards.
eCommerce Developer

Add a new folder item in existing folder

Similar Messages

Maybe you are looking for