Add a param to an EventListener, is that possible?

Hi , does anyone know if it's possible to add a param to an
EventListener?
for example i have an timer.
myTimer= new Timer(500, 3);
myTimer.addEventListener("timer", createSquare);
myTimer.start();
I would like to pass the current movie to my EventListener
like this or add some more params.
myTimer.addEventListener("timer", createSquare(currentMovie,
maximum));
Is this possible ?

There is already a parameter it passes, and thats of type
event. I suspect creating a custom event dispatcher you could go
about what you'd like to do.

Similar Messages

TS4498 Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and wont to add or tweak it a bit is that possible?

Is music created in logic pro compatible with the logic pro x ? for instance if you have created something in logic pro and want to add or tweak it, is that possible? I suppose you would need the original logic folder?

Yes it is more or less compatible, except the use of 32 bit plugins, which is prohibited from now on. So although you're able to open Logic projects as far as down to v5 I believe, it is advisable to remain for 'adding and tweaking' in your pre LPX environment.
Have a nice day!

HT5312 It's keeping ask me about security question answer and never add a security questionnaire how it's that possible?

Hi a when I want to install a application it's keep ask me about answer a security question and I never add a security question. Thank you for you answer

If you log into your account via http://appleid.apple.com, and select the Password and Security section on the left-hand side of that page are you able to set them ?
If not, then from http://support.apple.com/kb/HT5665 :
If you have three security questions and a rescue email address, sign in to My Apple ID and select the “Password and Security” tab to send an email to your rescue email address to reset your security questions and answers.
If you have one security question and you know your Apple ID password, sign in to My Apple ID and select the “Password and Security” tab to reset your security question.
If you have one security question, but don't remember your Apple ID password, contact Apple Support for assistance. Learn more about creating a temporary support PIN to help Apple confirm your identity when you contact Apple Support.
If you can’t reset them via the above instructions (you won't be able to add a rescue email address until you can answer your questions) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Add additional params into existing SP

Hello,
please, how can I add additional params: @LastName and @FirstName into existing procedure that starts:
@PIN nvarchar(13)
AS
DECLARE @v_exist int
set @v_exist=0;
Namely, upon adding additional params:
@PIN nvarchar(13)
@LastName nvarchar(20)
@FirstName nvarchar(20)
AS
DECLARE @v_exist int
set @v_exist=0;
and adding additional table that comprises columns FirstName and LastName into existing Select statement(referenced table that comprises all possible values of PIN) by creating corresponding relationship, the SP freezes, fails without any output....
Note: SP checks for PIN that is entered into WEB application, in certain T1. If exists, it informs user that PIN already has been entered and new one must be of different type. But, I would like the First and Last name to be checked, too, i.e., in newly
added table T2 I would like LastName and FirstName to be extracted based on entered PIN and, upon that, to have checked these couple LastName AND FirstName in T1 (because, there are rows with missing PIN and fact that result could be more then one line is
not problem because T1 comprises only cca 300 rows... )
Tables T1 and T2 are not changeable but reference tables...The data entered via interface goes into some other tables...

Must be because, one person with it's belonging PIN can be entered only once into e.g., T1. Evaluation in the SP checks if entered PIN is in the T2, which comprises forbidden PINs, LastName, FirstName...etc...But, in some cases i.e., some rows, there
is missing PIN which is to say that I had to involve new table that comprises all possible values for PINs based on which I would like to extract LastName AND FirstName and check it against T2...i.e., check T3.LastName with T2.LastName AND T3.FirstName with
T2.FirstName...
But, like Mr.Sorna advised, without table scripts and sample data ...etc...my thread is too ambiguous...I am afraid...

How do i grab datalist ID and add it to button onclick to update that item

Hi, I have pulled over some data from my sql server 2012 in VB C# DataList view. I would like to add a custom button to each item that will allow me to delete an item from the database and also update a database column onclick. EG: Update the paid (bit)
column to 1 when the paid button is clicked. Here is what i have so far as i am new at this:
my aspx page:
<asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" Runat="Server">
</asp:Content>
<asp:Content ID="Content3" ContentPlaceHolderID="MainContent" Runat="Server">
<asp:DataList ID="dlActiveBills" runat="server" DataSourceID="SqlDataSource1">
<ItemTemplate>
Amount:
<asp:Label ID="AmountLabel" runat="server" Text='<%# Eval("Amount") %>' />
 
DateReg:
<asp:Label ID="DateRegLabel" runat="server" Text='<%# Eval("DateReg") %>' />
 
Deadline:
<asp:Label ID="DeadlineLabel" runat="server" Text='<%# Eval("Deadline") %>' />
 
Notes:
<asp:Label ID="NotesLabel" runat="server" Text='<%# Eval("Notes") %>' />
 
Name:
<asp:Label ID="NameLabel" runat="server" Text='<%# Eval("Name") %>' />
 
 
<asp:Button id="btnPaid" runat="server" Text="Paid" Commandname="update" />
</ItemTemplate>
</asp:DataList>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ProjectConnectionString %>" SelectCommand="SELECT
d.Amount,
d.DateReg,
d.Deadline,
d.Notes,
r.Name
FROM
Details d
LEFT JOIN
ReminderTypes r
ON
d.ReminderTypesId = r.ReminderTypesId
WHERE
d.Paid = 0"></asp:SqlDataSource>
</asp:Content>
my aspx.cs page
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Data;
using System.Data.SqlClient;
public partial class active_bills : System.Web.UI.Page
protected void Page_Load(object sender, EventArgs e)
protected void MainContent_dlActiveBills_btnPaid_0_Click(object sender, EventArgs e)
string dbConnection ="Data Source=somthing;Initial Catalog=somthing;Integrated Security=true;";
SqlConnection sqlConnection;
sqlConnection = new SqlConnection(dbConnection);
sqlConnection.Open();
SqlCommand cmd = new SqlCommand();
cmd.Connection = sqlConnection;
cmd.CommandText = "UPDATE Details SET Paid = 1 WHERE DetailsId = ?";
cmd.ExecuteNonQuery();
sqlConnection.Close();
This doesn't work but can it be done in this way somehow?

Hi irishwestman,
Thank you for posting in MSDN forum.
Since this forum is to discuss: Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System, and Visual Studio Editor.
Based on your issue, it is related to the ASP.NET, so I suggest you can post this issue directly to the ASP.NET forum:http://forums.asp.net/
you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can I add a text form field in Photoshop that can be edited in Acrobat reader?

I design coffee labels with Photoshop then send them off to the printers. The printers then open up a PDF and put in the best before date before printing. At the moment I have to add the text form fields using Acrobat Pro after i've saved the photoshop document as a Photoshop PDF. The problem is if I want to edit the labels at a later date, I have to re-add the text form fields with Acroabat again.
Can I add a text form field in Photoshop that can be edited in Acrobat reader? Is it better to use another program for this task?
Thanks in advance
Ian

As A1's Calculate script, under "Simplified field notation", enter:
A * 0.8
The same goes for B1 and B, resp.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now on my device and no matter how many ways I try its not worked

I have over 1200 songs in my iTunes library that have always synced fine, I have added a new album to my list from one of my CD's, synced to add it to my library but less that 100 songs are now showing on my device and no matter how many ways I try its not able to show any more.
Does anyone know why this is happening and how to rectify the situation as I have tried every help setting for the last 4 hours.

I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use. I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it. Any ideas on what to do?

Thanks but that doesn't give me the information I need. I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use. My Apple ID can be varified, just not the email that they will contact me with.

HT4913 i am trying to get my computer and my wifes computer on my itunes match. i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please

i did the add a computer function and it says that this computer is already associated with an apple id...if you use itunes match with your apple id etc for 90 days...please explain. is this going to screw my wifes account up?

If you both have seperate iTunes Store accounts then basically, yes, it is going "screw up" your wife's account.
iTunes Match is designed as a single-user service which is associated with one and only one iTunes Store account ID. If you have subscribed on your account and want to activate the service on another computer that is already signed in with an account the present account must be signed out and then iTunes signed into your account. This means the other computer will have complete access to your account and will only be able to make purchases on your account. iTM is not designed to be signed in and out at will. If she has apps purchased with her iTunes Store account they will not be able to be updated.

How do I add a email to my iMessage so that I can have two emails

How do I add a email to my iMessage so that I can have two emails

Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email. Add the email address and wait for Apple to verify it. You will have to respond to their email which will be sent to the inbox of the email address that you are adding to messages.
you can find more information here.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

How to add a checkbox to dynamic itab so that i can select some records

How to add a checkbox to dynamic itab so that i can select some records in the alv and can display them in another alv using a button
I have requirement where i have to display the dynamic itab records in an alv ....Some records from this alv output has to be selected through checkbox provided in the first column .( I will get to know the structure of the itab only at runtime ,so iam using dynamic itab)

Hi,
 I tried and finally i got it , Just try for it.
type-pools : slis.
PARAMETERS : p_tab type dd02l-tabname.
data : ref_tabletype type REF TO cl_abap_tabledescr,
 ref_rowtype TYPE REF TO cl_abap_structdescr.
field-symbols : <lt_table> type standard TABLE ,
 <fwa> type any,
 <field> type abap_compdescr.
data : lt_fcat type lvc_t_fcat,
 ls_fcat type lvc_s_fcat,
 lt_fldcat type SLIS_T_FIELDCAT_ALV,
 ls_fldcat like line of lt_fldcat.
data : ref_data type REF TO data,
 ref_wa type ref to data.
ref_rowtype ?= cl_abap_typedescr=>DESCRIBE_BY_name( p_name = p_tab ).
TRY.
CALL METHOD cl_abap_tabledescr=>create
EXPORTING
 p_line_type = ref_rowtype
receiving
 p_result = ref_tabletype.
CATCH cx_sy_table_creation .
write : / 'Object Not Found'.
ENDTRY.
*creating object.
create data ref_data type handle ref_tabletype.
create data ref_wa type handle ref_rowtype.
*value assignment.
ASSIGN ref_data->* to <lt_table>.
assign ref_wa->* to <fwa>.
loop at ref_rowtype->components ASSIGNING <field>.
ls_fcat-fieldname = <field>-name.
ls_fcat-ref_table = p_tab.
append ls_fcat to lt_fcat.
if lt_fldcat[] is INITIAL.
 ls_fldcat-fieldname = 'CHECKBOX'.
 ls_fldcat-checkbox = 'X'.
 ls_fldcat-edit = 'X'.
 ls_fldcat-seltext_m = 'Checkbox'.
 append ls_fldcat to lt_fldcat.
endif.
clear ls_fldcat.
ls_fldcat-fieldname = <field>-name.
ls_fldcat-ref_tabname = p_tab.
append ls_fldcat to lt_fldcat.
endloop.
loop at lt_fldcat into ls_fldcat.
if sy-tabix = 1.
 ls_fldcat-checkbox = 'X'.
 ls_fldcat-edit = 'X'.
modify lt_fldcat FROM ls_fldcat
 TRANSPORTING checkbox edit.
endif.
endloop.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
 it_fieldcatalog = lt_fcat[]
IMPORTING
 ep_table = ref_data.
assign ref_data->* to <lt_table>.
select * FROM (p_tab) into table <lt_table>.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 IT_FIELDCAT = lt_fldcat[]
TABLES
 t_outtab = <lt_table>.
Thanks & Regards,
Raghunadh .K

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package. How can I fix this?
Thanks
[email protected]

What is your operating system? Reader version?

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting?

When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.

HT1347 When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP

When I add a folder to the library, does that mean that 'later' when I drop a new file into that folder (already added) it will automatically end up in iTunes? (or do I have to add file/folder to library every time I have a new file??) I'm using XP...

iTunes does not actively scan the media folders. If you manually add content to a folder, then you must add that content to iTunes manually via the File > Add File/Folder feature.
The only folder that gets scanned is the "Automatically add to iTunes" folder.

Add a param to an EventListener, is that possible?

Similar Messages

Maybe you are looking for