Add Columns to MB26 Table Control Output

Hi All...I need to add additional fields to the MB26 (Pick List) Output which is a table control. The table control display is done by Screen 580 of Standard Function Group COWB (done by the FM CO_WB_MAINTAIN_GOODS_MOVEMENT). I wanted to know a way out to add the additional fields in the layout without modifying (without modification Key) the standard Screen layout.

hi,
I am able to do this using SAP GUIXT scripts. But since I am new to this Script would like to get some advice on it like is it best practice to use this technique in such situations? Also how do i make this change universl, like how should i deliver this develoipment to the customer nd other users? what kind of settings need to be done.
Any hint will be really helpul.
Thanks in advance.
Ags.

Similar Messages

CEWB - add Columns to standard Table control using enhancement

hi,
there is a table control in CEWB where i want to add a field from table STPO. Is this possible to add fields to standard tble control. If yes, what is the method? Enhncement or i read somewhere GUIXT. Whats that?
Any help will be really appreciated.
I hv got some list of BADIs, but none of them re triggering in the "Component assignment" screen:
EWB_SELECTION
CEWB_TSK_MENU_INTERN
CEWB_TSK_MENU_EXTERN
CEWB_OPR_MENU_INTERN
CEWB_OPR_MENU_EXTERN
CEWB_COM_MENU_INTERN
CEWB_COM_MENU_EXTERN
CEWB_CHA_MENU_INTERN
CEWB_CHA_MENU_EXTERN
CEWB_MST_MENU_INTERN
CEWB_MST_MENU_EXTERN
CEWB_GEN_MENU_INTERN
CEWB_TSK_UPDATE
CEWB_TSK_SCREENS
ags.
Edited by: ags on Jan 20, 2012 7:11 PM

hi,
I am able to do this using SAP GUIXT scripts. But since I am new to this Script would like to get some advice on it like is it best practice to use this technique in such situations? Also how do i make this change universl, like how should i deliver this develoipment to the customer nd other users? what kind of settings need to be done.
Any hint will be really helpul.
Thanks in advance.
Ags.

Add a new column in item table control of va01 screen

Hi All,
i have requirement to add new column in item table control of va01 screen 4900 for the custome field of vbap table
the required coloum is add with the help of access key
however whem i am trying to save data, that custom field is not populate
please let me know if any one had work on this

I think i solved the problem . The single way to to that is to modify the SAP standard Screen.

How to add check box in table control?

Dear frnds,
In our requirement i am used tablec ontrol for dialog programming, but i am confused about addition of check box as fields in table control.
Any help are welcome from your side.

Hi,
Chk this demo program: DEMO_DYNPRO_TABCONT_LOOP_AT
& RSDEMO02.
Another way:
Go to the edit mode of the screen select the table control column you want to make it as check box and follow the menu EDIT->CONVERT->check box.
(make sure that column definition in itab/ddtab is of size 1 char)
Also chek out this link:
Add Check box in Table control
Hope these help you.
Regards,
Anjali

New columns in the table control do not appear

Hi,
We have a requirement to add two fields(columns) in a table control for a transaction upon clicking Create button and those two fields should be editable. We have added the two fields in the table control. But, they do not appear in the transaction ( If I delete an existing column, then I am able see the new column). Have checked everywhere, but not sure if I am missing something here. There is no hide statement used.
Appreciate help on this.
Thanks,
Pavan

Hi Pavan,
What I understood is you are adding fields to the table control dynamically.\
For that you have to use field-symbols to add fields to the work area dynamically.
( If this is not your actual requirement share your code with me I will try to solve it. )
Regards,
Swaroop

How to Hide a entire column in a Table Control?

Can we hide an entire column in a Table control? Plz give some hints in doing the same...

Here is a sample, if you wish to do it programattically.   If you used the table control wizard, then you should have a module which is listed in the flow logic PBO of the screen. Its probably commented out.
itabcon_change_col_attr
Uncomment it and create the module. Then put the code that I have in the module below into your module.
report zrich_0003 .
*&spwizard: declaration of tablecontrol 'ITABCON' itself
controls: itabcon type tableview using screen 0100.
data: begin of itab occurs 0,
      fld1 type c,
      fld2 type c,
      end of itab.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
*       text
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*&      Module ITABCON_change_col_attr OUTPUT
*       text
module itabcon_change_col_attr output.
<b> data: wa like line of itabcon-cols.
loop at itabcon-cols into wa.
    if wa-screen-name = 'ITAB-FLD2'.
      wa-invisible = '1'.
      modify itabcon-cols from wa.
    endif.
endloop.</b>
endmodule.
Regards,
Rich Heilman

How to add a field and table control to BP transaction.

Hi,
I have a requirement to add a field and table control to the 'Control data' tab of the Transaction BP.
Can some on please help me if having a solution and with any relavant documents.
Thanks in advance.
Raj & Khader.

Also explore with EEWB tcode.
Refer this threads
Re: EEWB
Created New fields in Business Activity with EEWB
Cheers
Manohar

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to grey out one single column in a table control of TPMOE

Hi Experts,
Any body please tell me how to greyout a single column in a table control of TPMOE.
Help needed ASAP.
Thanks,
sreenivas.

lr_result      TYPE REF TO if_bol_bo_property_access
lr_iterator TYPE REF TO if_bol_bo_col_iterator
      CALL METHOD lr_iterator->get_by_index
        EXPORTING
          iv_index = index
        RECEIVING
          rv_result = lr_result.
      CALL METHOD lr_result->get_property_as_value
        EXPORTING
          iv_attr_name = 'TRANSFER_STATUS'
        IMPORTING
          ev_result    = lv_status.
if lv_status = x and component = cost_category.
rv_disabled = true.
else.
call super.
endif.
INDEX will have the row number.
Frame ur logic based on this.

Can you programmatically change the width of columns in a table control\indicator

Is it possible to programmatically change the width of columns in a table control\indicator ie to fit to width of the data or in my case the header information.

Create a property node (or reference) and use the 'Active Cell' property to select which column you want to change and then use the 'Cell size'--> 'Width' property to change the size.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
table.vi ‏33 KB

Cannot add column to flexible table when ddl autocommit is off using Procedure

Hello All,
Through procedure I am trying to insert data into the target(EX_92) table(with schema flexibility)
Source table data
ID
PRODUCT_CODE
PRODUCT_NAME
PRICE
COLOR
TYPE
1
1
rugg
101.22
2
1
rugg
101.22
3
2
book
200.32
BLUE
Y
Target table QUERY
drop table EX_P2;
CREATE COLUMN TABLE EX_P2(
ID INTEGER PRIMARY KEY,
PRODUCT_CODE VARCHAR(3),
PRODUCT_NAME NVARCHAR(20),
PRICE DECIMAL(5,2)
) WITH SCHEMA FLEXIBILITY;
Procedure to insert above records with additional columns into the target table(EX_P2)
Procedure
drop procedure "DS_O1"."PROC";
create procedure "DS_O1"."PROC"(IN max_value INTEGER, IN schema_name varchar(40), IN table_name varchar(40), IN column_list varchar(400))
LANGUAGE SQLSCRIPT AS
BEGIN
DECLARE maxid integer :=0;
DECLARE INSERT_STR VARCHAR(1000) :='';
select max(ID) into maxid from "DS_O1"."EX_P2";
select :maxid from dummy;
INSERT_STR :='insert into "' || 'DS_O1' ||'"."EX_P2" ('||:column_list||') (select ' ||:column_list||'
FROM "'||:schema_name||'"."'||:table_name||'"' || ' where ID >' || :max_value || ')';
EXECUTE immediate(:INSERT_STR);
END;
Now while executing above procedure
CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE');
I am getting the following error
Could not execute 'CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE')' in 23 ms 564 µs .
SAP DBTech JDBC: [7]: feature not supported: [7] "DS_O1"."PROC": line 18 col 1 (at pos 779): [7] (range 3): feature not supported: cannot add column to flexible table when ddl autocommit is off

Hi Rajnish,
I had the same issue. For what it’s worth I was able to do a workaround basically creating all the columns when I create the table. The following code works for me to create the table which is just a matrix with one Integer column as the key and the rest as type Double.
It is not ideal in all scenarios because the table columns cannot be added dynamically via a procedure at a later point. This table has 27K columns now
Of course one of the advantages of a flex table would be programmatically adding columns dynamically. This works, but maybe there is still a way to add columns dynamically from a procedure, and someone else can advise.
Apparently dynamically adding columns via procedures may have some "minor" limitations due to the need to compile the procedure with knowledge of the flex table DDL. But again, hopefully someone knows another solution.
Best regards,
Mark
DROP PROCEDURE CREATE_MATRIX;
CREATE PROCEDURE CREATE_MATRIX(
    LANGUAGE SQLSCRIPT
    SQL SECURITY INVOKER
    AS
/*********BEGIN PROCEDURE SCRIPT ************/
BEGIN
    -- cursor over messages
    declare cursor matrix_cursor for
        select distinct TERM
        from TERMS
        order by term;
       declare cnt INTEGER := 0;
       declare temptxt NVARCHAR(500000) := 'CREATE COLUMN TABLE DOC_MATRIX ( CONTENT_ID INTEGER ';
    for cur_matrix as matrix_cursor do
      cnt:=:cnt + 1;
           select temptxt || ', C' || cnt || ' DOUBLE' into temptxt from dummy;
    end for;
      temptxt:=temptxt || ' ) WITH SCHEMA FLEXIBILITY';
       EXEC :temptxt;
       select :temptxt from dummy;
END;
DROP TABLE DOC_MATRIX;
CALL CREATE_MATRIX();

ORA-22856: cannot add columns to object tables

Oracle 9i
==========
I tried to alter a table using a simple script.
ALTER TABLE tablename ADD col VARCHAR(50);
And it gave me the error: -
ORA-22856: cannot add columns to object tables
Can someone give me some direction on how to resolve this? The script executes fine on a test env.
Thanks in advance

Thanks for replying...
exit     Null? Type
BUS     NUMBER
REP     VARCHAR2(60)
COS     NUMBER
REP     VARCHAR2(50)
ACC     NUMBER
ADJ     VARCHAR2(2000)
BAS     NUMBER
BIL     VARCHAR2(360)
BIL     VARCHAR2(50)
BIL     VARCHAR2(3)
BIL     VARCHAR2(50)
BLP     VARCHAR2(240)
BLP     NUMBER
BOO     DATE
COM     NUMBER
COM     NUMBER
COM     NUMBER(15)
COM     NUMBER(15)
COM     VARCHAR2(4000)
COM     VARCHAR2(30)
CUR     NUMBER
CUS     VARCHAR2(240)
DEA     VARCHAR2(240)
EVE     VARCHAR2(240)
HEA     VARCHAR2(240)
HEA     VARCHAR2(240)
HEA     VARCHAR2(240)
HEA     VARCHAR2(240)
INC     VARCHAR2(30)
INV     DATE
MAN     VARCHAR2(360)
ORD     NUMBER
ORD     VARCHAR2(240)
PAY     VARCHAR2(240)
PAY     NUMBER
HEL     NUMBER
PEO     VARCHAR2(150)
PER     NUMBER
PER     VARCHAR2(30)
PER     NUMBER(15)
PRO     VARCHAR2(240)
PRO     VARCHAR2(240)
QUA     NUMBER(15)
QUO     NUMBER
QUO     DATE
QUO     DATE
QUO     VARCHAR2(80)
RED     VARCHAR2(240)
REP     VARCHAR2(360)
REP     VARCHAR2(30)
REP     VARCHAR2(30)
REP     VARCHAR2(150)
REP     VARCHAR2(3)
REP     VARCHAR2(150)
REP     VARCHAR2(50)
ROL     VARCHAR2(60)
SHI     VARCHAR2(360)
SPL     VARCHAR2(240)
STA     DATE
TER     DATE
TOT     VARCHAR2(240)
TRX     NUMBER
TRX     VARCHAR2(240)
TRX     VARCHAR2(20)
TRX     VARCHAR2(30)
WAI     VARCHAR2(240)
YEA     NUMBER
MAN     VARCHAR2(30)
BUF     NUMBER
BUF     VARCHAR2(60)
EMC     NUMBER
EMC     VARCHAR2(60)
INT     NUMBER
INT     VARCHAR2(60)
SUP     NUMBER
SUP     VARCHAR2(60)
BRM     NUMBER
BRM     VARCHAR2(60)
SUP     NUMBER
SUP     VARCHAR2(60)
REP     NUMBER
REP     VARCHAR2(60)
DIV     NUMBER
DIV     VARCHAR2(60)
SUP     NUMBER
SUP     VARCHAR2(60)
REG     NUMBER
REG     VARCHAR2(60)
SUP     NUMBER
SUP     VARCHAR2(60)
ARE     NUMBER
ARE     VARCHAR2(60)
DIS     NUMBER
DIS     VARCHAR2(60)
ROL     VARCHAR2(240)
ACC     NUMBER
BON     NUMBER
COM     VARCHAR2(240)
COM     VARCHAR2(240)
REP     NUMBER
BIL     NUMBER
BAS     NUMBER
TOT     NUMBER
TOT     NUMBER
OVE     NUMBER
BLP     NUMBER
QUO     VARCHAR2(30)
FN_     NUMBER
FN_     VARCHAR2(10)
SAL     NUMBER
RES     NUMBER
CRE     NUMBER
MAN     VARCHAR2(100)
PER     NUMBER
PLA     NUMBER
PLA     NUMBER
REV     VARCHAR2(30)
REP     VARCHAR2(150)
OU_     NUMBER
OU_     NUMBER
EXC     VARCHAR2(1)
MAN     NUMBER
INV     NUMBER
REP     NUMBER
UPL     VARCHAR2(1)
COM     NUMBER
SEQ     NUMBER
QUO     NUMBER
PRO     VARCHAR2(10)
PRO     NUMBER
PRO     NUMBER
BI_     NUMBER
CUR     NUMBER
YTD     NUMBER
PAY     NUMBER
PAY     DATE
PAY     VARCHAR2(1000)
PAY     VARCHAR2(80)
PAI     VARCHAR2(1)
HOL     VARCHAR2(1)
SRP     NUMBER
WAI     VARCHAR2(1)
WAI     VARCHAR2(1)
GBK     VARCHAR2(10)
TRX     DATE
PAY     NUMBER(15)
FIX     NUMBER
TER     DATE
ADJ     VARCHAR2(240)
PAY     NUMBER
PRO     DATE
OIC     DATE
OIC     NUMBER
OIC     VARCHAR2(30)
OIC     NUMBER
HEL     NUMBER
COM     NUMBER
TRA     NUMBER
HDR     VARCHAR2(30)
LIN     VARCHAR2(30)
LIN     DATE
SRC     DATE
EM_     DATE
EM_     DATE
ORD     VARCHAR2(30)
REP     VARCHAR2(150)
BIL     VARCHAR2(300)
PER     VARCHAR2(240)
Excuse the incomplete column names. All datatypes are basic ones and there are no constraints defined on any of the columns (dw env). The table is partitioned.

Is it possible to change nunmber of columns dynamically in table control

Is it possible to change number of columns dynamically in table control? if so how it could be done?
Thnaks in advance.
Sounder

You can update the table control in your program, the table control is a structure of the type CXTAB_CONTROL of TYPE-POOLS cxtab.
There you can hide or display column the same way you do for fields in LOOP AT SCREEN. there you will ahve to LOOP AT <control>-COLS.
TYPE-POOL CXTAB .
TYPES:
BEGIN OF CXTAB_COLUMN,
         SCREEN      LIKE SCREEN,     "Attributes struktur SCREEN
         INDEX       TYPE I,         "Position of a column on the screen
         SELECTED(1) TYPE C,          "Indicator 'column selected'
         VISLENGTH   LIKE ICON-OLENG, "Visualised length of a column
         INVISIBLE(1) TYPE C,         "Indicator 'column invisible'
       END   OF CXTAB_COLUMN,
BEGIN OF CXTAB_CONTROL,
         FIXED_COLS    TYPE I, "Number of fixed columns
         LINES         TYPE I, "Number of lines to display
         TOP_LINE      TYPE I, "Top line during next PBO
         CURRENT_LINE TYPE I, "Current line during LOOP/ENDLOOP
         LEFT_COL       TYPE I, "Fist scrollable column after fixed area
         LINE_SEL_MODE    TYPE I, "Line-selection : none(0), single(1),
         COL_SEL_MODE     TYPE I, "Column-selection:        multiple(2)
         LINE_SELECTOR(1) TYPE C, "Indicator: 'With line-selection col'
         V_SCROLL(1) TYPE C,            "not used
         H_GRID(1) TYPE C,        "Indicator: 'Horizontal grid-lines'
         V_GRID(1) TYPE C,     "Indicator: 'Vertikal    grid-lines'
         COLS      TYPE STANDARD TABLE OF CXTAB_COLUMN
                        WITH NON-UNIQUE DEFAULT KEY,
         INVISIBLE(1) TYPE C,
       END   OF CXTAB_CONTROL,
Regards

Column Header In Table Control

Hi all,
how to mentain the column header in table control,
in case of manually table control( not with wizard).
Thanks.

Hi,
First just drag and drop all the fields that are to be a part of the table control. Then drag the label on the column header. Give name and text to the label.
Regards,
Nikhil

Sort functionality using MULTIPLE columns in a table control

Hi all,
I have a custom screen with table control.Now i need to provide SORT functinality in this screen for the columns in the table control.
My questins:
1.Is it possible to seelct MULTIPLE columns in a table control for SORTING?If yes,what explicit settings do i need to do while creatng the TABEL CONTROL in the screen?DO I need to select "Column selection " as MULTIPLE??
2.How do I write the code for SORT functinonality for multiple columns?
I know how to write the code for SORTING on basis of single column .
Thanks!

Hi Rob,
Thanks for the reply.
However I was thinking to apply the same logic as for single columns as follows:
types : begin of ty_fields,
            c_fieldname(20),
           end of ty_fields.
data : t_fields type table of ty_fields,
           wa_fields like line of t_fields.
WHEN 'SORTUP'.(Ascending)
      loop at TABLE tc01-cols INTO wa_tc01 where selected = 'X'.
      SPLIT wa_tc01-screen-name AT '-' INTO g_help g_fieldname.
      wa_fields-c_fieldname = g_fieldname.
      append wa_fields to t_fields.
      endloop.
      describe table t_fields lines l_index.
      c_count = 1.
      if c_count <= l_index.
      read table t_fields into wa_fields index c_count.
      case c_count.
      when '1'.
      l_field1 = wa_fields-c_fieldname.
      when '2'.
     l_field2 = wa_fields-c_fieldname.
    and so on depending on the no of columns in the table control...
      endcase.
      endif.
      SORT t_tvbdpl_scr BY l_fields1 l_fields 2......l_fieldn.
Let me know if the above method will work!Also for the above method to work will the type of fields(columns on whihc sort function will be applied) matter???
Thanks again for your time.

Add Columns to MB26 Table Control Output

Similar Messages

Maybe you are looking for