Add data in webtogo client

Hello!
I read and work through the webtogo tutorial (to do list application). Everything works fine while I'm adding data in online mode. But if I try to add data in the webtogo client nothing happens. Is there a solution to solve that problem?
regards
Marco

Hi,
If you do not have Table Maintenance for your table and if you want to transfer the data to QA client then yes, it is required to create a Transport Request and then transport the Request number to QA client. if u do have table maintenance then you can directly create the data in the table in QA client itself.
thanks,
sksingh

Similar Messages

Saving data in a database and publishing data to multiple clients

Hi there. I'm using a bunch of Compact FieldPoint modules to read out a few hundred voltages, temperatures, currents, etc. I acquire this data at about 1 Hz (pretty slow). I would like to record this data to some sort of database on a cpu (running LV 8.0, connected to the FieldPoint mods), and serve the data to multiple (between 10 and 50) clients over the net, each running a compiled stand-alone "data grabber and viewer" application (which I'll have to write of course). I'd like these external clients to basically be able to pick a certain variable from the database, and plot it for the last week (or something like that). Presumably the standalone client would send some database query to the server. The server would then send the data to the client, and the standalone client would receive the data and plot it as the user sees fit. My question is how to implement this database? Should I use the LabView "Database" Add-On to create a database to store the data? Is it better to just store the data as binary and write my own data fetching routine to handle queries? How can I write this database to disk for permanent storage? Could this database be accessible outside of LabView?
Any help on this would be appreciated. Thanks!
Jesse Wodin
Post Doctoral Researcher
Stanford Linear Accelerator Center
650-504-2512

Hi Jesse,
The Citadel database is not a relational database. It's highly optimized for storing lower-rate (non-waveform) channel-by-channel, or "trace" measurement data. Another option you can consider is using DSC and Citadel on the server then writing a utility to export the data from Citdael to an SQL database. --That would solve the problem of having to write a logger application from scratch. You would only have to write the relatively simple application to export the data from Citadel and import it into a relational database.
You could accomplish this two ways. First, DSC includes a set of VIs that will retrieve historical data from Ciatdel. You could use LabVIEW to parse this data and write it to a table in a relational database. Second, Citadel actually includes a locally accessible ODBC interface. (You can query Citadel using an SQL query from the local computer). You could query Citadel using this interface, then write the result to a table in a relational database.
To view Citadel in its native format or query a Citadel database using ODBC from a remote comptuer that comptuer would need to have a licensed DSC RTS installed.
~~

Data Protection Manager Client

Hello collegues,
is there an option to install Data Protection Manager Client (not the agent itself) for DPM 2012/2012 R2? We need an option for clients to backup/restore their's data on demand with GUI interface. I saw such an application in DPM 2010, but can't
see it in 2012 options fo installation.
Regards

Hi,
Please see the below links that may assist you.
https://technet.microsoft.com/en-us/library/jj628055.aspx
Note if needed:
The administrator of a client computer must set the name of non-admin users who have to have permissions to perform end-user recovery of protected data of a client computer. You only need to add the registry entries on
the client machines same as on DPM 2010. The DPM 2012 DPMRA Agent should still honor the keys.
To do this, the administrator must add the following registry key and value for each of these non-admin users. This is single key that contains a comma-separated
list of client users. You do not have to add this key separately for each non-admin user.
Registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection
REG_SZ: ClientOwners
Value: Names of non-admin users. This should be a comma-separated list of user names without any leading or trailing spaces, as in the following example: domain1\user1,domain1\user2,domain1\user3 (and so on)
Following blog provides detailed steps to configure DPM recovery permissions for users that are not members of the local administrators
group:
http://blogs.technet.com/b/dpm/archive/2011/05/10/how-to-configure-the-dpm-client-to-allow-non-admin-users-to-perform-end-user-recovery-of-dpm-protected-data.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to
other community members reading the thread. Regards, Dwayne Jackson II. [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights."

Lpadmin to add shared printers to clients

My setup: A Mini running 10.6.8 Server and thirty late model iMacs running 10.6.8 as clients. Sever is sharing four late model wide format Epsons for use by the iMacs. Printers are shared on the server via ipp. Sever and clients have identical print drivers and PPDs installed.
I want to be able to use lpadmin to add printers to the clients. In the past I've been able to do this in this particular setup using an dnssd queue in the lpadmin command. My preference would be an ipp queue but I've never been able to get that to work.
After upgrading printer drivers I cannot get any sort of lpadmin command to properly load a functioning printer. HELP!
What does work:
I can use lpadmin to add a printer to a client bypassing the server and connecting directly to the networked printer (lpd queue)
I can add a server hosted printer to a client using the gui and the default browser and all is well. This works for "Shared" printers (ipp queue) and for "Bonjour Shared" printers (dnssd queue)
What doesn't work:
I cannot add a server hosted printer using the gui and the IP tab by selecting the IPP option and entering the server IP Address and proper queue name.
No form of lpadmin command that I have tried (MANY) will successfully add a printer. This includes command formats that did work before the driver upgrades.
On these options that fail, the printer seems to be properly added. The correct driver is loaded and the user sees all of the correct and unique options for the printer in the print dialog. Upon printing the job fails on the client. It never reaches the server. The Apple print queue shows the job as "printing" and "copying data" for a while then either puts the printer into a Pause state (most common) or shows a Communication Error message. The most common error log segment looks like this:
D [08/Feb/2012:09:27:39 -0600] [Job 20] Set job-printer-state-message to "Empty print file!", current level=ERROR
D [08/Feb/2012:09:27:39 -0600] [Job 20] cgpdftoraster: bytes written for sheet 1 = 33100650
D [08/Feb/2012:09:27:39 -0600] [Job 20] Backend returned status 1 (failed)
D [08/Feb/2012:09:27:39 -0600] [Job 20] Printer stopped due to backend errors; please consult the error_log file for details.
D [08/Feb/2012:09:27:39 -0600] [Job 20] End of messages
D [08/Feb/2012:09:27:39 -0600] [Job 20] printer-state=5(stopped)
D [08/Feb/2012:09:27:39 -0600] [Job 20] printer-state-message="Empty print file!"
D [08/Feb/2012:09:27:39 -0600] [Job 20] printer-state-reasons=paused
Here's a very small portion of the lpadmin versions that I've tried. I've done all of the below also using the -P option to specify the driver file location in /Library/printers… And I've also tried not specifying a driver at all. I've tried placing -E at different places within the command or leaving it out altogether. I've tried leaving the -o option out. I'm not sure where else to look.
lpadmin -p 4900_Photo -E -L "FAC 162B" -v ipp://129.62.177.206:631/printers/4900_Photo -m EPSON\ Epson\ Stylus\ Pro\ 4900.gz -o printer-is-shared=false
lpadmin -p 4900_Photo -L "FAC 162B" -v dnssd://4900_Photo%20%40%20artlab-server._ipp._tcp.local./cups -m EPSON\ Epson\ Stylus\ Pro\ 4900.gz -o printer-is-shared=false -E
Any hints greatly appreciated!
Bob Smith

Hi,
This can be caused by using large fonts in the Windows Display Settings, the text will move the button out of the field of view on the form, and the form will not resize to compensate. Please go to Control Panel -> Appearance and Personalization ->
Display, change to a smaller font size to check the result.
We may also suspect the Screen Resolution caused this, change to a different resolution to check the result.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Failed to add data -1116 could not commit transaction

Hello Experts
After installation of our add-on on client machine with SAP 8.8.1. we have received this error:
"Failed to add data -1116 could not commit transaction" after traing to add data to our table by using this code :
Dim oUserTable As SAPbobsCOM.UserTable
oUserTable = oCompany.UserTables.Item("UserTab")
'Set default, mandatory fields
oUserTable.Code = UniqueID
oUserTable.Name = UniqueID
'Set user field
oUserTable.UserFields.Fields.Item("U_UserField").Value = "UserValue"
oUserTable.Add()
What should I do?
Thanks

Hello
Also execute the following statement on server in a query analizer
select @@version
if the versions (client and server) are the same it is correct. If not, you can apply the sql native client (sqlncli.msi) from sql server patch
regards
János

Want to add "download" feature for clients to download their photos

Good morning all!
I am learning as I go and putting together my website for my photography business. I want to add the functionality for clients to be able to download full resolution versions of photos from my sessions with them - versus me having to email them to them a few images at a time due to size restrictions on email servers.
It would be great if I could have a client log in area where they could select their session from a drop down menu and download their photos.
I have found a way to insert menus with html snippet.
I believe I could add a form for clients to use when selecting files to download from JotForm
I don't know what the next steps would be....
any and all guidance most appreciated.
Thank you
Julie

Slideshow supports displaying IPTC data.
In the Slideshow module, in the tool bar, find the ABC and click. To the right of the ABC a text box will appear, preceded with “Custom Text” . Click on “Custom Text” for a list of options and select “edit”. At the bottom of the dialog box will be choices from the IPTC Data including Title and Caption. Just add that data in the Library Module right panel under Metadata and then you can display it in the slide show. The Slideshow right panel gives you control over the color, opacity, font and face in a section titled “Text Overlays”
Bob McAnally

Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's? New to iMovie. I have 3 titles that build. First is logo, add prod't name second line, add date 3rd line. They shift when dissolving between them. Title function NG for this.

Anyway to "UN" Ken Burns stills globally or as default bringing in jpeg's? New to iMovie. I have 3 titles that build. First is logo, add prod't name second line, add date 3rd line. They shift when dissolving between them. Title function NG for this.
The people at the Apple store gave me a long, tedious workaround which is open Pages and bring in logo. Export it as a PDF. Open the PDF in Review and then "Save As" a jpg to the desktop and drag and drop into the imovie. Even with this process, the text will sometimes shift. When it works, it looks good, the logo comes up, then the second line fades in under it as part of the build and then the third line completes the graphic. It would something this easy and straight forward would be easy.
HarveyV

I did the work around for the titles/jpg's in this short video.
I'll try your fix on the next one. I have 22 short 3-5 minute videos to produce
and I'm on number 5. This should save me a bunch of time.
It would appear that you know more than the guy at the Apple Store.
Thank goodness for on-line forums.
I already tried fixing them individually as you suggested,
by going the crop/fit route. However, even then,
the second in the series had always shifted.
The first and the third images lined up, but not number 2..
So I brought in all the images, (1, 2 and 3).
and then the 2nd image again and put it in the third position
in the sequence on the time line. I deleted the "original" 2nd image.
So I had 1, 3, then 2. Then I dragged and dropped the correct number two
into position two and it worked. So what happens is that the
client logo appears, then that stays put and the next line dissolves in
and then the third dissolves in. They are three separate titles, but they
are aligned perfectly so that they build as I dissolve between them.
I think the problem with the edit copy route would be that while
I could edit/copy the logo, I couldn't position text through the
iMovie text function exactly as it only gives you middle or bottom third etc.
Each title with the product name is positioned individually depending on
length and number of lines. By going through Pages, I can position the logo
and the text exactly. Also, some logos are horizontal, while others
are square etc., so text positioning is crucial.Anyhow,
I'll try the global approach for the next one and see how that works.
Thanks very much for your insight and especially for your prompt reply.
I trust you're inside on this gorgeous July 4th because you're
making money on your computer. ;-)HarveyVOn 7/4/2011 3:57 PM, Apple Support Communities Updates wrote:
> Apple Support Communities <https://discussions.apple.com/index.jspa>>>> Re: Anyway to "UN" Ken Burns stills globally or as default> bringing in jpeg's? New to iMovie. I have 3 titles that build.> First is logo, add prod't name second line, add date 3rd line.> They shift when dissolving between them. Title function NG for...>> created by AppleMan1958 > <https://discussions.apple.com/people/AppleMan1958> in /iMovie/ - View > the full discussion > <https://discussions.apple.com/message/15552380#15552380>> ------------------------------------------------------------------------>> I am baffled by what you are asking...but if you are asking how to > turn off the Ken Burns effect, you can do it for future photos you add > by going to File/Project Preferences and setting the default initial > photo placement to FIT or CROP rather than Ken Burns.>> For a global change on photos that are already in your project, pick a > photo. Open the Rotate, Crop, Ken Burns Tool. Select FIT or CROP. > Exit the tool. Now select this same photo and EDIT/COPY.>> Now, EDIT/SELECT ALL.>> Finally, EDIT/PASTE ADJUSTMENTS.../CROP ADJUSTMENTS.

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN.

Pls Help me with steps to add data from xml file to SAP B1 through B1iSN. I am getting stuck in xsl transformation. not able to understand where the mapping code needs to be added.
Pls explain me the steps for adding data from xml to B1 quotation step by step.
thanks and regards
Priya

Hi,
Have you checked this: https://sap.na.pgiconnect.com/p45508295/?launcher=false&fcsContent=true&pbMode=normal ?
Thanks,
Gordon

Add data to the table in the database with the use of add button

The name of my database is Socrates.
The name of the table in the database is Employees
I want to be able to add data to the database. i am presently working on the add button such that when i enter date into the textfield and press the add button it should automatically register in the table.
The error upon compilation is with this line of code
If (ae.getSource() == jbtnA)// it says that ";" is expected
Below is the entire code
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Mainpage extends JFrame implements ActionListener
     JTextField jFirstName = new JTextField(15);
     JTextField jSurname = new JTextField(12);
     JTextField jCity = new JTextField(10);
     JTextField jCountry = new JTextField(12);
     JTextField jSSN = new JTextField(8);
     JLabel jFirstLab = new JLabel("First Name");
     JLabel jSurnameLab = new JLabel("Surname");
     JLabel jCityLab = new JLabel("City");
     JLabel jCountryLab = new JLabel("Country");
     JLabel jSSNLab = new JLabel("Social Security Number (SSN)");
     JButton jbtnA = new JButton ("Add");
     JButton jbtnPrv = new JButton ("Previous");
     JButton jbtnNt = new JButton ("Next");
     JButton jbtnDl= new JButton ("Delete");
     JButton jbtnSrch = new JButton ("Search");
     public Mainpage (String title)
          super (title);
          Container cont = getContentPane();
          JPanel pane1 = new JPanel();
          JPanel pane2 = new JPanel();
          JPanel pane3 = new JPanel();
          pane1.setLayout (new GridLayout (0,1));
          pane2.setLayout (new GridLayout(0,1));
          pane3.setLayout (new FlowLayout());
          pane1.add(jFirstLab);
          pane1.add(jSurnameLab);
          pane1.add(jCityLab);
          pane1.add(jCountryLab);
          pane1.add(jSSNLab);
          pane2.add(jFirstName);
          pane2.add(jSurname);
          pane2.add(jCity);
          pane2.add(jCountry);
          pane2.add(jSSN);
          pane3.add(jbtnA);
          pane3.add(jbtnPrv);
          pane3.add(jbtnNt);
          pane3.add(jbtnDl);
          pane3.add(jbtnSrch);
          cont.add(pane1, BorderLayout.CENTER);
          cont.add(pane2, BorderLayout.LINE_END);
          cont.add(pane3, BorderLayout.SOUTH);
          jFirstName.addActionListener(this);
          jSurname.addActionListener(this);
          jCity.addActionListener(this);
          jCountry.addActionListener(this);
          jSSN.addActionListener(this);
          jbtnA.addActionListener(this);
          jbtnPrv.addActionListener(this);
          jbtnNt.addActionListener(this);
          jbtnDl.addActionListener(this);
          jbtnSrch.addActionListener(this);
          validate();
          setVisible(true);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          pack();
          setResizable(false);
     public void actionPerformed(ActionEvent ae)
               If (ae.getSource() == jbtnA)
                                fst = jFirstName.getText();
                    srn = jSurname.getText();
                    cty = jCity.getText();
                    cnty = jCountry.getText();
                    int sn =
Interger.parseInt(jSSN.getText());
                                String ad = "Insert into Employees
(Firstname,Surname,City,Country,SSN)" +
"values('"fst"','"srn"','"cty"','"cnty"','"sn"')";
                    Statement stmt = con.createStatment();
                    int rowcount = stmt.executeUpdate(ad);
                    JOptionPane.showMessageDialog("Your
details have been registered");
                    Statement stmt = con.createStatment();
                    int rowcount = stmt.executeUpdate(ad);
public static void main (String args[])
          Mainpage ObjFr = new Mainpage("Please fill this
registration form");
          try
               Class.forname("sun.jdbc.odbc.JdbcOdbcDriver");
               String plato = "jdbc:odbc:socrates";
               Connection con =
DriverManager.getConnection(plato);
          catch(SQLException ce)
               System.out.println(ce);
}

i have restructured the code, but the following line of code is giving error:
String plato = jdbc:odbc:socrates;
the entire code is below:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
public class Mainpage extends JFrame implements ActionListener
     JTextField jFirstName = new JTextField(15);
     JTextField jSurname = new JTextField(12);
     JTextField jCity = new JTextField(10);
     JTextField jCountry = new JTextField(12);
     JTextField jSSN = new JTextField(8);
     JLabel jFirstLab = new JLabel("First Name");
     JLabel jSurnameLab = new JLabel("Surname");
     JLabel jCityLab = new JLabel("City");
     JLabel jCountryLab = new JLabel("Country");
     JLabel jSSNLab = new JLabel("Social Security Number (SSN)");
     JButton jbtnA = new JButton ("Add");
     JButton jbtnPrv = new JButton ("Previous");
     JButton jbtnNt = new JButton ("Next");
     JButton jbtnDl= new JButton ("Delete");
     JButton jbtnSrch = new JButton ("Search");
     Statement stmt;
        String ad;
        public Mainpage (String title)
          super (title);
          Container cont = getContentPane();
          JPanel pane1 = new JPanel();
          JPanel pane2 = new JPanel();
          JPanel pane3 = new JPanel();
          pane1.setLayout (new GridLayout (0,1));
          pane2.setLayout (new GridLayout(0,1));
          pane3.setLayout (new FlowLayout());
          pane1.add(jFirstLab);
          pane1.add(jSurnameLab);
          pane1.add(jCityLab);
          pane1.add(jCountryLab);
          pane1.add(jSSNLab);
          pane2.add(jFirstName);
          pane2.add(jSurname);
          pane2.add(jCity);
          pane2.add(jCountry);
          pane2.add(jSSN);
          pane3.add(jbtnA);
          pane3.add(jbtnPrv);
          pane3.add(jbtnNt);
          pane3.add(jbtnDl);
          pane3.add(jbtnSrch);
          cont.add(pane1, BorderLayout.CENTER);
          cont.add(pane2, BorderLayout.LINE_END);
          cont.add(pane3, BorderLayout.SOUTH);
          jFirstName.addActionListener(this);
          jSurname.addActionListener(this);
          jCity.addActionListener(this);
          jCountry.addActionListener(this);
          jSSN.addActionListener(this);
          jbtnA.addActionListener(this);
          jbtnPrv.addActionListener(this);
          jbtnNt.addActionListener(this);
          jbtnDl.addActionListener(this);
          jbtnSrch.addActionListener(this);
          validate();
          setVisible(true);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
          pack();
          setResizable(false);
          try
               Class.forname(sun.jdbc.odbc.JdbcOdbcDriver);
               String plato = jdbc:odbc:socrates;
               Connection con = DriverManager.getConnection(plato);
               stmt = con.createStatment();
          catch(SQLException ce)
               System.out.println(ce);
          catch(ClassNotFoundException ce)
               System.out.println(ce);
     public void actionPerformed(ActionEvent ae)
               try
                    if(ae.getSource().equals(jbtnA))
                                     fst = jFirstName.getText();
                         srn = jSurname.getText();
                         cty = jCity.getText();
                         cnty = jCountry.getText();
                         int sn = Interger.parseInt(jSSN.getText());
                                     ad = "Insert into Employees
values('"+fst+"',"+srn+"','"+cty+"','"+cnty+"','"+sn+"')";
                         stmt.executeUpdate(ad);
                         JOptionPane.showMessageDialog(this, "Your details have been
registered");
               catch(SQLException ce)
                    System.out.println(ce);
public static void main(String args[])
          Mainpage ObjFr = new Mainpage("Please fill this registration form");
}

How can I transport data from one client to another client?

How can I transport data from one client to another client?
Regards,
Subho

hmmm, CTS = cutomizing transport?
If you have a customizing table, there are still two possibilities.
1. customize in DEV system and transport
2. customize right there where you need it.
this depends on how the maintainance view is built. If it is a simple customizing table and you get not asked for a TR when customizing a new record or changing an existing one, you hit possibility 2.

How can I add email (via outlook client) to share options of preview app

how can I add email (via outlook client) to share options of preview app

You can't. Apple's share button only supports Apple Mail (as specified by launching Apple Mail, choosing preferences and choosing general.). Maybe Apple will open this up to other apps in future updates.

How do i add data from database to JTable ! Urgent

How do i add data from database to the columns of JTable?.

hi,
Thanks for ur link. but this is just a part of my application which i am developing user interface in swing package for which i want to know how to show data to user in the table format where by table input data will be from the database. say something like todays activity is shown to the user in table format... So u have any idea of how to do this...

How to transfer data from one client to another client

Dear Experts,
Please explain how to transfer data (Materials) from one client to another client?
Thanks,
Ajay Kumar

Hi Ajay,
Check any of below methods
Refer thread http://scn.sap.com/thread/171981 where people use IDOCs for master data transfer.
OR
This is done by BASIS team, by client refresh or client copy. Check with your basis team for this and there is some predefined time when they plan this activity, and in most project they do it once in 3 months etc to get production environment in test system which helps to resolve issues of production by creating similar case in test system.
Check below threads for more information
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/cleint-copy-vs-client-refresh-1377848
http://basissap.blogspot.in/2008/05/what-is-client-copy.html
OR
You can download data from one client and upload in another through BDC or LSMW.
Regards,
Sharat

How to add data in a file

hi,
I have written following code.I have a file. i want to add data in this file.
When i add data then data is added but i donnot get the previous data. What`s the problem of my code? Is there anyone can help me? how i will add data with the previous data? Please help me.
String username=request.getParameter("UserName");
String userage=request.getParameter("UserAge");
String address=request.getParameter("UserAddress");
String sex=request.getParameter("sex");
FileWriter f = new FileWriter("d:\\download_dreamweaver\\Project_3\\WebContent\\SaveData.txt");
f.append(username);
f.close(); ith regards
bina

Looks like you're creating a new file (which overwrites the old one) every time. You need to open the file first and then append to it.

Add data in webtogo client

Similar Messages

Maybe you are looking for