Add/edit location

Hi,
In the new photos app on Mac OS X, how do I add or edit the location the photos were taken in? I have a bunch with no location and some with the incorrect location. The photos app doesn't seem to provide anything to do this, which seems like a terrible oversight.
Thanks,
Mike

In the new photos app on Mac OS X, how do I add or edit the location the photos were taken in?
That is not supported. You have to edit/add locations before importing the photos to Photos,
You could ,for example, first import to iPhoto, add the locations, batch change the titles and captions, do all the things that are not yet supported in the new Photos, then export the photos from iPhoto and import them to Photos.
Or use the free exiftool, if you like the Terminal.
See: http://www.sno.phy.queensu.ca/~phil/exiftool/exiftool_pod.html#geotagging_exampl es
To install exiftool: http://www.sno.phy.queensu.ca/%7Ephil/exiftool/install.html
Other convenient apps are Jetphoto Studio, Geotagalog, there are many more ..
I use Jetphoto Studio, but it is not free.

Similar Messages

HT204410 Photos not allowing to add or edit location data

The new Photos app does not allow location data to be edited or added.
For those users who own a camera without a GPS, there is no way to add the location data to the photos which defeats the purpose of having the map function if some/most/all of your photos can't be included.
I spent a great deal of time updating my locations, using the Location Manager, in iPhoto only to find that they have been replaced with simplified locations. For example, Waterworld has been replaced with a Suburb/State location.
The new app has severe limitations compared to iPhoto. As bad as iPhoto was, these limitations make it extremely hard to work with.
Apart from the location issue above, photos can only be sorted by name. In Event view, any new events are added to the bottom of the list. Faces are ordered by, what appears to be, the number of photos associated with the face. So when your adding faces from the suggested faces, one has to look closely at the faces to find the face to associate the photo with. If the library contains a lot of Faces, then this can be a difficult task. Also, when selecting faces from the Suggested Faces list, multiple faces cannot be selected and each photo has to be moved, or ignored, individually.
I had a smart list which showed all of the un-named faces but that has gone and there doesn't seem to be a way to show all of the photos with named faces other than to go through each photo individually.

Thanks for your reply.
If I have to use iPhoto, then that begs the question: Why would I want to upgrade to the new app?
It's not a good situation to have to use the old app (iPhoto) just to geotag my photos.
When I refer to the sorting issue, I had the sidebar visible. When not using the sidebar, the organisation is still not very good. For instance, to find my wedding photos, I must locate the event by drilling down through the years, collections etc. Or to view ALL of the photos taken at my house is now impossible as the location is now the same as my child's school!
As for the date sorting, I can't change it so that the most recent appear at the top. I must scroll down.
It's a terrible app given what iPhoto used to provide. I'm using it on my desktop, not a mobile phone. What applies to memorial doesn't, nor should, be applied to my desktop as there are quite different constraints.
By all means, have continuity (or whatever they call it), but don't constrain the desktop app to the capabilities of a mobile. It's just plain silly!

Is there an easy way to add a location map to Pages?

Hi,
Using the latest version of Pages, is there an easy way to add a location map?
Many Thanks
Simon.

Are you trying to copy an image from the Maps application?
If you are, the easiest way I have found to do this is by going to Edit>Copy in Maps and then pasting the image in the Pages document.

Console - how to add log locations?

Console is great when there's a problem. But I know that some of the logs I want to view are not in the pre-set folders indicated on the left under the 'Logs' heading.
Can anyone tell me, please, how do I add other locations to the log area?
JB

Ah, thanks for the clarification! I'd call it a divider; to me, a slider is like the volume control!
What I'm trying to do is to view logs of items that have been created in e.g. /opt/local/var/ by Darwin Ports. e.g webmin, squid, sarg, gallery etc. Sure, I could repoint all the logs to a location that's already set in the Console sidebar. And spend hours reconfiguring the various apps. Or, I could do the simple option - add the location to Console!
I think, however, you have answered my question ttboyk. For which, many thanks. Does anybody else out there know how to edit the content of the location frame in Console?

Is there a way to add GPS location after importing to Photos?

I would like to add GPS location data to photos I take with my DLSR. In the past I was able to copy location data from a photo taken on my iPhone I take and copy it to all my DLSR photos.
Can this be done in Photos?

I actually bought Greenfinder and vCaddy (Golf GPS apps both in app store) and did extensive testing yesterday. You can see my full review here.
http://forums.macrumors.com/showpost.php?p=6056655&postcount=20
Bottom line - Could be a great alternative to a SkyCaddy or similar device
Message was edited by: dhy8386

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
Please confirm.
iPhone 4, iOS 7

Hello jayanand,
You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
iOS: Force an app to close
http://support.apple.com/kb/HT5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

How can i find/add/edit images.gif to an application ?

Hi,
I would like to know How to find/add/edit images.gif in an application ?
Thanks in advance
Yoel

Yoel,
Go to shared components. Search for images (left under)
Leo

How to get add/edit button in classic report

Hi,
Iam trying to built a classic report,but here i need to have add/edit button.How can i achieve this in classic reports?
I know this add/edit button with a pencil on note will come through the interactive report.
But here iam trying to build a page same as the sample application Orders tab i.e. My Orders page.Here he created a classic report with alternating rows but has an add/edit button to it.How could that be achieved??
Can Anyone help me in this regard to built the My orders page including the add/edit navigation getting to order for items.How can tat sample application of My orders built?
TIA,
Regards,
Kranthi.
Edited by: Kranthi.K on Sep 29, 2009 12:38 AM

One more doubt is
But here iam trying to build a page same as the sample application Orders tab i.e. My Orders page and when we hit add/edit image it directs us to the My orders info and order items.
How can we build that page of My orders info and order items.Can anyone guide me through the steps the sample is created.
I tried many times with master detail,but dint achieve what the default Sample Application has been done.
Thanks in Advance
Edited by: Kranthi.K on Sep 29, 2009 4:54 AM

How do I change a calendar from read-only so that I can add/edit an event?

From what I can figure out, iCal thinks that I have published my calendar. However, when I click on "Calendar", "Publish" is the only option. I have been able to add/edit in the past. I am not sure what I did to change it so that I am unable to add/edit.
MacBook Mac OS X (10.4.9)
MacBook Mac OS X (10.4.9)

Deb,
Welcome to Apple Discussions.
1. Can you view your published calendar with your web browser?
2. A published calendar will have a "Broadcast" symbol to the right side of the calendar name. Is that symbol present in your Calendars Pane of the iCal window?
3. How many calendars do you have?
4. What are their names?
5. Where did you publish your calendar?
;~)

How do i add a location to an image in photos?

I am trying to add a location to an existing image (I could do it in i-photo) and can not figure out how to add an address, any help?

There is no way in Photos.
http://www.apple.com/feedback/macosx.html is the place for feature requests and feedback

Resource not found or internal server error when trying to edit location

Hi all,
ACS is appliance and version 5.2.0.26.7
The problem is after creating location under all locations.
When trying to click on the location name to edit location profile, there is an error page that shows
"ACS:Resource not found or internal server error"
But if click on the radio button and press the edit button at the bottom of page.
There is no problem.
Any on has the same problem?
Detail step and screen capture in attached file.

I can't find any CDETS that exactly match what you describe but up to patch 10 of 5.2 the follwoing CDETS related to NDGs are included:
CSCtx83260
NDG locations not showing up on GUI
CSCtu02752
ACS 5.2 patch 8 cannot display long lists of NDGs
CSCtu04594
ACS 5.2.0.26.7 - only 50 NDGs shown on GUI with more than 100 configured

How to create a login page for my client and a form so he can add/edit or delete information ?

I have a real state client and one of the pages is to show all the houses he is selling with their information.
And he wants to have a login page so that only him have permission to add, edit or delete a house from his web page.
Also when adding a new house i want to have a form(kinda like craigslist, ebay,amazon) so he can chose type of house,price,adress, floor, used , new, etc...?
I hope i was specif enough.
thanks

If this was me, I would just create a log in page. Set the users default access level to 0 and then go into the database and set your's to 1. From there, I would have a page that only is accessable to people with a user access level > 0 .
On this second page, make a table where you can insert picture(s) of the house, as well as information about the house. Have this page insert records into a database.
Finally, you will have your house listing on a page that is a dynamic table, which populates itself from the database of housing pictures and information.
It involves some database work, but with the built in functions of Dreamweaver, it is simple. I would suggest however, that you store links to the pictures in your database as opposed to storing the actual picture, but that's more up to you.
By doing all this, you have made it so at any time, your admin, and only the admin, can log in, upload pictures and information about a listing, and have it go live to the site.

How can i add STORAGE LOCATION field which is not...............

hi,
sap gurus,
good morning to all,
how can i add STORAGE LOCATION field which is not in the standard tables namely
KOMP, KOMK, and KOMG.
how to include it in our FIELDS FROM FIELD CATALOGUE.
if we include this field is there any impact on the standard tables.
plz let me know this.
bcz
we are selling our products in two ways
(1). one is straight from factory ie direct sales from factory
if customer asks for excise invoice then we will sell thru factory and keeping freight in mind we will
deliver him which ever is economical either rail or road.
before coming to second case of selling the goods
we will do STOCK TRANSPORT ORDER from plant to different storage locations.
if we did STO thru road we have to sell the goods thru road only.
if we did STO thru rail we have to sell the goods thru rail route only.
(2). if the customer is not asking any excise invoice then we will send the goods thru depo/storage
location which is not registered under excise.
if the goods came by road then it will be delivered by road only.
if the goods came by rail then it will be delivered by rail only.
my logic here is
basing on the
storage location, transportation types, and distance i want to create condition record
that captures exact frieght at the sales order level.
confirm whether i am right or wrong.
regards,
balaji.t
09990019711.

Hi,
It is not recommended to add new fields to any SAP standard tables. It disturbs the whole SAP functionality.
But if you have no choice expcept to change the standard tables to meet your requirement - then you need an access key to modify the object, which is available from the market place.
Nevertheless, the better option is to create a 'Z' table with the required fields and use that accordingly.
Changing standard tables will have serious impact when you apply patches or do an upgrade on the existing functionality.
REWARD POINTS IF HELPFUL
Regards
Sai

Content retrieved through RIDC after add/edit/delete is not updated

Hi
There is a functionality such that a user is shown the content details like folder name and content under the folder name to be displayed on the portal.
Basically, the metadata of the folder and content need to be displayed and add/edit/delete operations need to be available for the user.
So any updates performed on the UCM content from the portal need to be updated on the UCM.
To enable this functionality made use of the RIDC API. Everything as to content display, add/edit/delete operations are all working fine and getting updated on the UCM front also.
But the issue is that after these operations being performed the user needs to be displayed updated content information on the portal. But while trying to retrieve the results using SEARCH RIDC Service, results are fetching the old data and hence the content information displayed on the page is also stale.
While trying to hit the URL again i.e. a new request then the updated contents get dispalyed.
Can anybody tell me what could be the issue? I am unable to understand the issue.
All this has been done using taskflows.
Thanks

Hi ,
Most probably the content is not indexed in the interval when it is updated and then retrieved with search call . As a test , recreate the issue and then open UCM Web UI - Content Information (of the content updated / searched ) - check the Status value for the latest revision .
Most likely it will be in Done status (if no conversion is being used) .
Second time when you the actual correct data shows up then check the Status and there it would be in Released status .
I believe that you are trying to search / display the content even before the new version is indexed and made available for search .
Thanks
Srinath

How to add a location of face in the new Photo App?

How to add a location of face in the new Photo App?

You have to open a photo, right klick it and click "add a new face" or something like that.

Add/edit location

Similar Messages

Maybe you are looking for