Add field to the MB26 selection screen

Hi All,
I need to add a new field called Purchasing group to the selection screen of MB26.
I can do the Implicit enhancement at the end of the selection screen as a new block.
But in my requirement I need it in the middle to the both blocks called "Selection from Reservations" and "Selection of Orders".
For this could you please help me to solve.
Thx in Advance.

Hello,
If you go to the attributes of report, where you are using Logical Database;
there is a button named 'Report Category', which controls the field on selection screen...
If you select that one you can choose report category and also can create your own category
Thanks

Similar Messages

Add fields to logical database selection screen

Hello,
Is it posible to add a field in the default selection screen of a logical database.?
I´m using ELM. In the default selection screen, only the lifnr and ekorg fields are shown. I want to show the matnr field, is it posible?
Thank you!

Hello,
If you go to the attributes of report, where you are using Logical Database;
there is a button named 'Report Category', which controls the field on selection screen...
If you select that one you can choose report category and also can create your own category
Thanks

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Add field in listing/exclusion selection screen

Hi, expert, i have create a condition table for my listing type Z001. there is a field name ZZABCD in the condition table. In VB03, I can see the conditon table in 'Key combination'. Now i want to add the field into the selection screen when i click the button 'Condition info' in VB03. Please advice. Thanks.

Dear Rick,
go to OV06, there select the table in which you want to add field. And then select the Add Field and search and add your required field.
Also,
while assinging accesses to access seq., select the table you want to add against the access seq. and in that table, add the newly created field. And finally save.
There is no need to change other setting as you want to add only the field.
Now try the field should be displayed
regards,
Sagar

Dear freinds how to open the fields in the PNP selection screen

Dear Freinds,
         When you use the PNP selection screen , i dont find the Orgeh field in default selection screen .
However , using the code at selection screen output i have closed certain feilds using the loop at screen,
but when iam trying in similar way to show the field
on the selection what is the code i have to use
in the loop at screen...........especially for the field
orgeh .
i have tried the othere options like required.........this working when iam able to make the date fields mandatory, similary i want to try with the below
code to get the field Orgeh on the selection as default feild when we execute the report.
can any one please modify me the code
LOOP AT SCREEN.
    IF screen-group4 = '026'   .
      screen-active = 0.
      screen-invisible = 1.
       screen-input = 0.
    ENDIF.
    modify screen.
endloop.
what i have to use in the loop at screen for me to get the orgeh field on the selection screen.
thanks & regards
madhuri

Hi Madhuri,
Unless you dont declare the orgeh field in hr report category you cannot show it on the selection screen nor you can hide it.
If you do not want to use hr report cateogry.
What you can do is that declare a parameter or selection screen called p_orgeh type orgeh.
Here you can do the hiding on conditions.
Kindly note here that after get pernr you will have to put a check that
check p0001-orgeh in p_orgeh.
Because for the fields declared by you automatic filtering does not happen.
Regards,
Divya
Pts valuable.

Add bottons on the application tool bar of the standard selection screen

Hi All,
I am having the standard selection screen in module pool programing. I wnat to add the bottons on the application tool bar of the standard selection screen.and hide the existing bottons (like std. execute and i bottons.)instead of these i want to give my won bottons like create and display.
pls help on this.

Hi Sridhar,
Try the Code below. It places two buttons on the selection-screen along with the execute button.
TABLES sscrfields.
PARAMETERS: p_carrid TYPE s_carr_id,
            p_cityfr TYPE s_from_cit.
SELECTION-SCREEN: FUNCTION KEY 1,
                  FUNCTION KEY 2.
INITIALIZATION.
sscrfields-functxt_01 = 'LH'.
sscrfields-functxt_02 = 'UA'.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
      WHEN'FC01'.
      p_carrid = 'LH'.
      p_cityfr = 'Frankfurt'.
    WHEN 'FC02'.
      p_carrid = 'UA'.
      p_cityfr = 'Chicago'.
ENDCASE.
START-OF-SELECTION.
WRITE / 'START-OF-SELECTION'.
Just go to the table sscrfields to knoe the fields in it. I think this clears the issue.
Regards,
Swapna.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

Add description fields to the demand simulation screen on CTM

Dear SAP Gurus,
We have a requirement to add the description fields to the demand simulation screen inside the CTM, do you know how to do this? The description fields are not available in the standard layout, I couldn´t find any exit or BADI to insert more fields on the screen.
Do you have any suggestion?
Thanks and BR
Mauricio

Thanks for your reply
BADI - UKM_BP_ADD_FIELDS
Documentation of this BADI shows as follows...
With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
Methods of this BAdI:
FILL_FIELDS
To provide additional fields for the formula editor
FILL_ADD_INFOS and SAVE_ADD_INFOS
To define additional information for the following data in table form:
Collateral
Negative event
Check exceptions
Credit insurance
I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
I have looked at BDT Business data toolset
http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
but i didn't get any idea ...
Can you please elaborate and let me know how to do this for my requirement?
Thanks
Govi

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

How to add profit center in fbl5n selection screen

how to add profit center in fbl5n selection screen
and
it is save to copy ddf from sap to cus
wll it affect anything else

When you are on selection screen of FBL5N, press (Shift + F4) DYNAMIC SELECTIONS, there you will see a Dynamic selection screen along with your normal FBL5N selection screen, you will find Profit Centre ther, if you don't find Profit Centre in Dynamic Selection Screen you can add the same from the list on the left, search for profit centre, place your cursor on Profit centre and press the Arrow Button(Copy Selected) on top of the list. Now you will find Prfit Centre in Dynamic selection screen, fill the field with values and press save, that's it.....
Reward points if useful, get back in case of query...
Cheers!!!

Add fields to the standard report QM15

i want to add fields to the standard report.
t.code QM15 which display the list of items: selection of notifications.
the fields i want to add are:
1. batch no
2. Sample no
3. Main vendor
please let me know how can i do this. if any one can help me with screenshot doc. this is really helpful.
Thanks

Hi experts,
I have done with the z** creation of the standard report. I also create the z*include for the standard includes which are in the standard program. But I not able to find the fieldcatlog or include where I can add my new fields.
But I tried with one structure tht is standard structure in tht standard report so i make it as z*structure and I append my new fields to this structure. I debug the report and this works fine and also shows output, but at output when I change the layout to see these new fields it shows dump.
Then I tried with one more thing to give the positioning to my new added fields. (This is what u can say column positioning ).
When I execute this,it goes to dump screen.
Now I don't what to do with this.
If any one like to see the code. Plz let me know I will post the code.
Or if any one have any document on this plz share. Or any other solution.
Thanks in advance.
Thanks
Sachin

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

Hiding Screen fields in a Report selection screen

Hi Experts,
I have a requirement to hide/disable screen fields in a report selection screen when the user clicks on some radio buttons .
Here is the scenario,
1) There are 4 radio buttons four radiobuttons in one group on the selection screen:--
Block no:1
PARAMETER: r_not TYPE c RADIOBUTTON GROUP a1 DEFAULT 'X'.
PARAMETER: r_prgs TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_remv TYPE c RADIOBUTTON GROUP a1.
PARAMETER: r_noresp TYPE c RADIOBUTTON GROUP a1.
2) Based on the user clicking/selecting the radio buttons no.2,3 nad 4 i need to hide some fields in the other selection block
in the selection screen.The parameters are as follows:
Block no:2( These fields need to be hidden/disabled)
PARAMETER: r_occ(3) TYPE c OBLIGATORY DEFAULT '1'.
PARAMETER: r_and TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_or TYPE c RADIOBUTTON GROUP g1.
PARAMETER: r_days(3) TYPE c OBLIGATORY DEFAULT '1'.
Thanks

Contd.....
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
      "When Customer button is clicked set flag 1
    WHEN 'FC01'.
      L_FLAG = '1'.
      "When Sales Order button is clicked set flag 2
    WHEN 'FC02'. "Sales order
      L_FLAG = '2'.
      "When Execute button is clicked set flag 4
    WHEN OTHERS.
      L_FLAG = '4'.
ENDCASE.
AT SELECTION-SCREEN OUTPUT.
CASE L_FLAG.
    WHEN '1'. "When Customer button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '2'. "When Sales Order button is clicked
      LOOP AT SCREEN.
        "Set the Production and Customer Block as inactive
        IF SCREEN-GROUP1 = 'BL1' OR SCREEN-GROUP1 = 'BL2'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN '3'.   "When Refresh button is clicked
      LOOP AT SCREEN.
        "Set the all Blocks as active
       IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3' OR SCREEN-GROUP1 = 'BL1'.
          SCREEN-ACTIVE = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    WHEN OTHERS."When Execute button is clicked
      "Set the Sales order and Customer Block as inactive
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'BL2' OR SCREEN-GROUP1 = 'BL3'.
          SCREEN-ACTIVE = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.

How can i display output in the same selection screen?

I've a requirement. Suppose in my selection screen there are three input fields. On the basis of this selection screens input It will display the output in the same selection screen. Can it be possible? .
Can it be possible to modify the default screen no for the selection screen 1000?
Thanks in advance.
Abhijit

Hi Abijit,
Whatever changes made in STANDARD SELECETION SCREEN 1000 or screens generated using 'SELECTION-SCREEN' statements, are not permanent.
It will get back to its original appearance, while you execute again or some time later.
Whenever you get into 'CHANGE' mode of these screens, an information will be displayed as follows ;
Selection screen: Report generation makes screen
changes ineffective
Regards,
R.Nagarajan.

Add field to the MB26 selection screen

Similar Messages

Maybe you are looking for