Add new http hearders in request (NSAPI) ????

Hi,
I developed a NSAPI Filter for sun web proxy 3.6 SP3. I could not find the way to add a new http header in the request under Solaris.
The API function that i use works fine under WinNT but not under Solaris.
pblock_nvinsert("toto","titi",rq->headers);
Under solaris this API only update headers that already exist. It doesn't ADD it if thisone does not exist.
Does somebody have an idea ?
THX

Similar Messages

Add new fields to travel request WD

Hello,
Please, I need to know if it's possible to add any new fields to Travel request Web Dynpro.
It exists a dynpro with customer data but just in R/3...
Thank you

Dear EstrellaP
Yes you can.
You will need to enhance your WD.
Check this post, were I've discussed this identical matter recently:
How to change headings and titles in standard performance mgmt screen ?
Kind Regards
/Ricardo Quintas

Add new system to an Existing project in Change Request in Solution Manager

HI,
Is it ok to add new systems and remove systems to an existing Project in Solution Manager with Change Request Management activated?
Currently, Change request is already set-up in our solution landscape, however, a new BI Dev and QA systems were created to replace the old Dev and QA systems that was initially set-up in our Charm. Can you please share with me the steps that I need to do to successfully remove old Dev and QA from Charm and replace them with the new systems? Is it safe to do this in an open project and maintenance cycle?
Thanks!

Hello,
Please, check the topic "6. Changes in the logical components of a project where Charm is already activated" of the link below:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this link can help you.
Best Regards,
Diego Fischer

How to add new fields for ESS leave request

Hi friends,
Can u please help me with my issue.......
My issue is to add new fields in ess/leave request i.e...
The component needs to be Checked-out through Net Weaver Development Infrastructure, make the necessary enhancements, and finally Check-it-in back to NWDI.
Custom Function Modules are to be invoked apart from the standard ones that are already available in the Leave Request component ess~lea inorder to accommodate the extra absence-type logic.
can u please sujjest me where should i make changes in the given 14 components
means in which view i have to add these fields.................
Regards
Rajesh

Hi Rajesh ,
Check whether u are able to find the ess dc's under inactive dc's in webdynpro
If ur not able to find it then Check the landscape configurator in CMS and also the transport studio and confirm that ess packages are imported fine
Ganesh ,
for creating a DTR client u need to open the DTR perspective right click and "create clients" before that go to windows ->preferences of the NWDS and check the development infrastructure URL is gven correctly ...try pinging it once...
Do check ur SLD is up or not!!!
Regards
Krishna
Message was edited by:
krishnagopal Mukundan

Add new key figs or characteristics and "Repair full request"

Hi Gurus, here are my questions
1.If I add new key figs or characteristics(which are not Key fields) to ODS and Cube containing tons of data, Will the transport for structure changes fail due to presence of data?
2.The extractor to the ODS which inturn is feeding the cube, is delta enabled. So the newly added objects wont have entries for historical records. If I change this extractor to "Repair full request" after adding the new fields, will the new fields then get populated?
3. After the "Repair Full Request" activity, Can I change the Infopackage setting back to delta update mode?
Thanks for the help in advance!!
Simmi

Hello Simmi,
1. Transport should go fine. As you are not changing the key fields, it should not cause any problem even if data is present.
2. Yes. But make sure what data you want to laod. As with full repair, system is not going to check for duplicate data. The responsibility lies with you.
3. Sure. if you mark the full load as repair, the delta settings will be unaffected.
Hope it helps.
Regards,
Praveen

In browser editing: Can my client add new images with hyper-links to their websites without having to replace images already there?

My client would like to be able to add new images to their site themselves and use them as hyper-links to external sites without having to replace an old image with the new one (or blank place holding images - far from ideal). Is there ANY way that this is possible? They do not wish to update and add new images/links regularly and it is certanly not intended to be used as a blog or way of being able to constantly keep content new and fresh otherwise I would set them up with a blog account and add that to the site. It is merely a way of adding links to other local businesses every once in a while.
Please see the page they wish to update... Friends. (Please excuse the layout... the customer will not be able to resize or edit the images themselves and wishes to add them as-is!)
Thanks in advance for any help. If anybody knows how I can ask an Adobe official mod, that would be great... that, or make a request for a future addition in an update?
Warm regards,
Ben Gathercole

Hi Andria,
Changing links is currently not possible with in-browser editing.
Please post this as a feature request in the following feedback form :
http://feedback.inbrowserediting.com/?url=
Regards,
Akshay

HTTP 400 Bad Request when accessing Oracle XE/Apex from the Internet

I have Oracle Express Edition upgraded to Apex 3.2. I can access everything (SQL prompt, Apex HTTP) from my local machine. I have configured the server for remote access on a non-default (not 8080) port.
I have executed: exec dbms_xdb.setListenerLocalAccess(false);
I can access the server using:
http://coyote:9977/apex (brings me to Application Express Administration Services login screen)
(where "coyote" is the local machine name of my Windows Vista box, where the Oracle/Apex server is installed.)
But when I try:
http://internet_server_name:9977/apex
(where "internet_server_name" is the internet DNS name visible of my machine visible from the internet.)
I get "HTTP 400 Bad Request"
I know the request is hitting the Oracle Listener (getting through firewalls, cable modem router, etc) since the http attempt causes the entry:
20-MAR-2009 20:36:53 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=68.189.244.22)(PORT=52540)) * handoff * http * 0
to be made in the C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
An attempt using the local (Windows) machine name makes a similar entry in the listener log:
20-MAR-2009 20:47:35 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.7)(PORT=52811)) * handoff * http * 0
This seems like a security issue of some kind (is the server dropping a request from "outside" the local domain?)
I'm new to Oracle so I am not familiar with how to debug this sort of connectivity issue. In case it helps:
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 20-MAR-2009 19:27:00
Uptime 0 days 1 hr. 30 min. 59 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=coyote)(PORT=9977))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
Any help appreciated,
john

Hans Forbrich wrote:
CoyoteTech wrote:
I have tried running with the firewall (F-Secure) completely disabled, but it made no difference. I do see the request hit the listener, and the handoff appears to be successful, but it goes silent from there. I also have a cable modem router that has the port forwarding set, but maybe there are other handoff ports besides the initial one (e.g. 8080) that need to be forwarded?Please also check the Windows firewall is off as well. Yes, Windows Firewall is disabled as well. See my previous post to Tyler - I'm pretty sure the reqwuest makes it through the firewall/router layer, since it causes an entry in Listener.log
Is your problem through the router only? In other words, if you try from a second machine that is on the same side as your XE, are you working OK? (My home ISP blocks a bunch of ports. Including SMTP, FTP, Telnet. And 8080 since that is a traditional default for many Java 'servers'.)
Yes, it appears to be related to a non-local IP address. I'm sure it makes it through the router - I also have several other ports that make it through (e.g. port 80).
I have poked around the DBMS_EPG docs, and ran a few of the commands there (list DADS etc). DBMS_EPG was first 'released' to us in 10gR2. As far as I'm concerned, XE is the public 'beta' or 'release candidate'. (This is supported by Oracle's docs that state that Apex using DBMS_EPG is first supported using 10.2.0.3 or 11g.) There are known bugs and there is no way to patch XE to fix them. However, I do not know whether you are hitting those bugs.
http://www.astral-consultancy.co.uk/cgi-bin/hunbug/doco.cgi?11410 provides some good notes.
Interesting. I will check out these docs later today.
>>
What happens when the listener hands off to a registered handler?
http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/concepts.htm#i1049597 gives a good description.
Thanks.
How do I pick up the [log] trail from there?I'm thniking that the listener's log is still the primary way to go. You may need to increase the log or trace level. I have not investigated how to gen or access logs inside EPG.I tried Tyler's trace but did not seem to add additional info to the Listener.log.

Add new fields to default view when creating fields via REST in sharepoint 2013

Hello,
When I add new fields via REST in a list, they don't appear in the default view for that list.
Here is my code in case you need it:
public function creeChamp(nomListe:String, champ:String, type:int, requis:Boolean):void
postURL.data = JSON.stringify({ '__metadata': { 'type': 'SP.Field' }, 'Title': champ, 'FieldTypeKind': type,'Required': requis, 'EnforceUniqueValues': false,'StaticName': champ});
thanks

You need to add the field to the view as well.
Here is the API.
Our code looks pretty different because I'm working in AngularJS, but here's a snippet from a working example:
$http.post(siteUrl + "/_api/web/lists/GetByTitle('" + listName +
"')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
// POST data is empty for this request
}, getPostConfig())
.then(function (response) {
deferred.resolve("Added column to view");
.catch(function (response) {
deferred.reject('Error ' + response.status + ': ' + response.data.error.message.value)
Bottom line is you just POST to this URL however you normally do - except no data:
"/_api/web/lists/GetByTitle('" + listName + "')/Views/GetByTitle('All%20Items')/ViewFields/addViewField('" + columnName + "')",
Hope this helps!
- Bob

Add new locale

Hello,
how to add new locale to the list in BI Dashboards -> Settings> My Account -> Locale (location)
http://tinypic.com/r/zjhttv/6

German spell checker is currently on the product roadmap and will be available out-of-the-box in the product itself - though there are no fixed timelines as of now.
Can you please file a request via Enterprise support channel so that this feature gets a higher priority?
BTW the application itself works fine in English, French , German & Japanese languages - if you change the browser locale to German then the entire UI would appear in German language.
--Santosh

How to add new fields in collaboration tasks?

Hi experts,
Currently, by default, we are able to see in the collaboration tasks rooms fields as "Subject", "From", "Sent Date" , "Due Date" ,
"Status"...
Now i want to add new custom fields apart from standard; when i create new tasks i want fill this new fields and after, display this fields in the UWL.
Can you please let me know how to add our own fields in the collaborations tasks rooms ?
Thanks in advance,
Regards,

Hi Victor Capi,
Could you have a look at the following link.
http://wiki.sdn.sap.com/wiki/display/KMC/XMLFormBuilderinEP7.0
Formsbuilder open the collaboration project and you add the fields. Then import the xml to your portal.
Regards,
Prabha

When I add new music to iTunes, it doesn't appear under artists or anywhere else in library.

The other night, I tried adding a bunch of music that I had sitting on my Seagate external hard drive to my iTunes library, which is also located on my external. I attempted to add around 1,500 songs at once. It was giving me problems at first and only added some of the music so I tried again. Now I have a problem.
When I add new music, iTunes only recognizes that I added it after I close iTunes are restart it. But then, the music doesn't show up under artists or anything. The new music shows up under the Recently Added smart playlist, the folder is located in the iTunes library, and when you search for the music it says its there, but it's not under artists or in the song list or anything.
Example:
1. Added music from Abandon All Ships! (who I didn't have before), but they don't show up under artists despite the fact that iTunes says the music is there.
2. Added music from Whitechapel (who I had before), but the album doesn't show up with the rest.
Hopefully this makes sense the way I explained it. It's all rather frustrating.

Hello transcend94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
iTunes: Understanding iTunes Media Organization
http://support.apple.com/kb/ht3847
Avoid using different versions of iTunes, or you may be unable to locate content, or may import or transfer content to the wrong location.
Best of luck,
Mario

Adding new data to leave request DropDown

Hi,
We have deployed ESS 1.0 BP. In leave request application we select the leave request type(PL, CL, SL) from drop down menu.
Here privelige Leave is by default selected... but we need to remove PL from default and add hipen(-) so that user has to compulsory select the leave type from drop Down,
Now the problem is as this list comes from R3 .. so how can we add new item to this drop down menu. Whether its needed to be done R3 side or do i need to modify Leave request Application. If i need to modify this leave request application than h0w can append hipen to the already list coming in drop down menu...
Can any person specify in detail from where this configuration is needed to be done..?
Regards,
Jigar OZa

Check this thread
Re: Regarding control of leave types in the dropdown in ESS screen
Try this from thread
You can add the leave type that you want to get displayed in ESS in SPRO setting .
in Spro
Personnel Management --> Employee Self-service ---> Working Time -> Leave request> Processing Process ---> Specify Processing Process for Types of leave.

New field in Travel Request

Hi friends,
Happy new year to all,
Here i am working with a enhancement in create travel request,i am able to add a new field but on saving the data i should add this field value with the standard table data.If Any one added a new field in travel request , Please let me know how to save the new field data with stadard data.i have checked with on_save method in comp control still i did not get a proper idea.
Edited by: sudheer b on Jan 2, 2012 8:08 AM

Hello Sudheer,
I have had an experience of working on such requirement, the SAP Standard T&E module(provided you are using the same) stores data in cluster, if you are adding an additional field to the trip by adding it in the context node then you have to make some specific changes into a number of places, the problem is compounded because you would not be able to hold the custom fields value otside the trip webdynpro component, I would not be able to preempt the specific reuquirement of yours but in a nutshell you have to perform the folloing steps:
1) capture the field value(say vendor of the expense line item) into a variable, after reading the context node, make sure that you extend all the context node and update the binding(if I remember correctly they are all interface nodes)
2) save the custom field value(vendor of the expense line item, from the step 1) in some global area, this can be done in many ways, it all depends which option you perfer.
3) Extend number of sap standard structures like for line item you have to extend PTRV_WEB_RECEIPTS_EXT, PTRV_UTIL_BELEG, PTRV_UTIL_BELEG etc...etc...also you have to do an enhancement on the function module PTRA_UTIL_RECEIPTS_GET...there are some more function module & structure which depends on your requirement.
4) extend the SAP Standard function module which saves a trip, there are many function modules which is called for the save.
There would be number of structure enhancements and they would be kind of duplicating themself....hence I would recomend if you can figure out the number of custom fields you would need and assign all of them to a structure, once that is done, you can assign this structure to all the append structure of the standard tables and structure.
I am sorry if I am replying you in a sketchy way...but to get the full picture I have to get ypur requirements first....do let me know if this doesn't help!!
Thanks & Regards
Abir Chakraborty

Why "New Item" in ribbon and "Add new item" in xsllistview link to different form

Hi all,
I have a question. I have a list with two new forms, one is created in SPD the other one is created in InfoPath (both forms are created by developer).
I don't know why the new form link to different page when I click "New Item" in ribbon and "Add new item" in list view.
1. Will open new form that created in InfoPath when click on "New Item" in ribbon.
2. Will open new form that created in SPD when click on "Add new item" in list view.

One way to do this would be to hold the urls for the pages you need to display in a table. You could then build the links as one of the columns of a report using some fancy SQL. 
 
Or you could make a simple function to return the correct link based on the relevant parameters: 
 
create or replace function get_url (p_criteria in varchar2) return varchar2 
is 
lv_url varchar2(500); 
begin 
if p_criteria = 'Personal' then 
lv_url := 'http://host:port/pls/portal/etc...'; 
end if; 
etc... 
return '&LT;a href="' || lv_url || '"&GT;' || p_criteria || '&LT;/a&GT;'; 
end; 
 
Your report could then include the function as one of the columns in your report. 
Not very elegant but it should do the job.
Patrick.

Add new document link not working in upgraded sharepoint 2013?

Hello there,
Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
is working fine with environment Office web apps not configured with Sharepoint.
Looking resoluion /suggestion, thanks in advance.
Regards,
Sushil

Hi Sushil,
According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
from 2010 to 2013.
For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
1.In SharePoint 2013 Central Administration, click Manage web applications.
2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
it using claims-based authentication, or you can change the authentication method of the web application.
Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
To do this, run the following command on the SharePoint Server:
Get-SPWopiZone
The result will be one of the following:.
internal-https
internal-http
external-https
external-http
Next, run the following command on the SharePoint Server.
Get-SPWOPIBinding
In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
the WOPI zone to match the result from Get-SPWOPIBinding.
If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
For more information, please refer to the article:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Add new http hearders in request (NSAPI) ????

Similar Messages

Maybe you are looking for