Add-on connection timed out Error

Hi all,
I have created an add on following sdk help. (ie; a blanket project). The add - on installs properly but while runnig it gives connection timed out error. I have found a lot of similar threads in the form. but all of them uses B1DE. And the B1DE is not getting installed properly in my system . the installation of B1DE completes sucessfully but i dont find any SAP templates in my Visual studio 2005. I suppose its a B1DE version problem since while installing it is asking for vsual basic .net 2003 path where as I have oly VS 2005. From where do I get B1DE versionfor VS 2005 ?
Regards,
Priya

Priya,
You download B1DE from the same area as you download the B1DE for VS 2003.
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/a175fb62-0c01-0010-a8b5-fa58a13b1cf7 [original link is broken]
You need to download B1DE for VS 2005.
Eddy

Similar Messages

Add on connection timed out

what is the meaning of Add on connection timed out error and how to solve this error?
Edited by: Neetu Dhami on May 30, 2008 5:36 PM

Dear
Please review Note 912572 which explains in what cases
this error you reported occurs and how to solve the issue.
please update the Connection String in your addon
code as explained in the Note and test the connection again.
if this does not help, please check if the issue occurs on particular workstation or all. and if the error occurs, try again, will the issue gone?
Best Regards,
xiaodan an
sap business one forum team

When starting the Add-on: Connection timed out issue

When starting the Add-on: Connection timed out issue
Hi,
We have a client in SAP 2005 PL 44.
I built the add-on for them using simple installer wizard ( I tried advanced set-up also).
When starting the add-on, I get the message 'Connection Timed Out'.
Add-on status is failed.
But the add-on is actually connected. i.e, The functionality associated with the add-on is working fine.
I had SAP 2007 before and un/reinstalled SAP 2005 in order to connect with this client.
I had built the same add-on in a similar way for the same client for lot many times in the past, but I never got this issue.
I tried the following:
1) Delete SM_OBS_DLL and un/reinstall DI API
2) un/reinstall B1DE
Always I'm getting this error.
Please let me know your inputs.
Thanks.
Geetha

Hi Geetha,
The timeout issue has been discussed quite a bit already on this forum. Please do a search or look at these threads:
Timed Out Error with ADDON
Addon Connection Timed out
Regards
Aravind

SAP 8.8 Add-On Connection Timed Out....

Hi Experts,
I am new to SAP 8.8.I Created a Customized Add-On by using B1DESetup_2.1 Specifically give for the SAP 8.8. I Installed the AddOn in the Same PC(Machine) where i Developed the Customization. It Installs fine...But when i Start the Add-On it Showing Add-On Connection TimeOut Message...(But my Code Works fine with out the AddOn Identifier....)
Thing that i need to Share....
1) I Doesnt give any Add-On Identifier at the time of connecting with the UI....
2) Do we need any Add-On Identifier in before connecting to the UI API....
//SboGuiApi.AddonIdentifier = "";
3) I need a claritiy that in the 2007B/2005B we created the Add-On but we doest added any Addon Identifier....at that time addon Works Fine...
4) How can i Get the Add-On Identifier...(Should i need to get it from the SAP)
5)Because of not Giving the Addon Identifier...did i getting the Add-On Connection Timed Out....while starting the Add-On...
Thanks in Advance,
MadhuSudhana Rao.G

Hi,
Please review the SAP Note 912572 which explains in what cases this error you reported occurs and how to solve the issue.
Wish it helps you.
Best regards,
Lucy Shen

2004 Registering Add On Connection Timed Out

Hi I am having a bit of trouble getting an addon to register and load successfully in SBO 2004...
I can get the Add On to Install properly, however when I load it, I get the error :
Add-on connection timed out
This occurs even though the add on has successfully loaded in the background and is running. In the Add On Manager the status of the add on is set to Failed...
I tried setting the AddonIdentifier string before connecting in my code using the Add-on Identifier Generator (Development and Implementation strings but these did not help)
The Helloworld sample was a good help getting thus far, but even when try to install that as an add it disconnects straight away.
Any help much appreciated!

Hi Frank,
I think the problem was the fact that I was hardcoding the connection string. After I changed it to accept it through the command arguments that the SAP application passes in it seems to connect fine - below is the procedure that I use to connect, I have left the commented lines in to show you how i was trying to connect. I am still unsure as to when to use the AddonIdentifier property however.
I have the add-on working 85% well now, but have posted again at SAP Business One SDK any input on this post would be very appreciated!
Thanks,
Daniel
          private bool SingleSignOn()
               SAPbouiCOM.SboGuiApi objGui = new SAPbouiCOM.SboGuiApi();
               objCompany = new SAPbobsCOM.Company();
               string strCookie;
               string strConnection;
               long lngConnectResult;
               try
                    //objGui.AddonIdentifier = "4CC8B8ACE0273A61489738C94047855DE8768CDD37F64D4F11E82759A542BD515D5A6E4F50A19B939FBB0FA844FA35C7B604E771";
                    //objGui.Connect("0030002C0030002C00530041005000420044005F00440061007400650076002C0050004C006F006D0056004900490056");
                    objGui.Connect(Environment.GetCommandLineArgs().GetValue(1).ToString());
                    objApplication = objGui.GetApplication(-1);
                    strCookie = objCompany.GetContextCookie();
                    strConnection = objApplication.Company.GetConnectionContext(strCookie);
                    if(objCompany.Connected)
                         objCompany.Disconnect();
                    lngConnectResult = objCompany.SetSboLoginContext(strConnection);
                    if(lngConnectResult != 0)
                         System.Windows.Forms.MessageBox.Show("Connection failed, make sure SAP Business One is running and you are logged into a Company");
                         return false;
                    lngConnectResult = objCompany.Connect();
               catch
                    System.Windows.Forms.MessageBox.Show("Connection failed, make sure SAP Business One is running and you are logged into a Company");
                    return false;
               return true;

SP01: Add-on connection timed out.

I have upgraded an existing add-on to SP01. It runs fine in development mode and it installs correctly using and installer and Add-on Administration.
When it tries to execute in production mode it gives the error: "Add-on connection timed out" after only about 12 seconds.
I have checked the sapbobscom2005.dll and it is the correct version and special build.
Any suggestions on how to resolve this are greatly appreciated.
Mel

Hi Mel,
This behavior is not new in SP01 to my best knowledge!
I remember having found the same behavior back in 2004...
What you need to do is to first connect to UI API + afterwards eventually do some more initializations!
HTH,
Frank

Connection Timed Out error while saving messages in Solution Database

Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
Babu

Hi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas

I get a connection timed out error when trying to connect to the itunes store, if I have pending downloads they show up and I can download, also I was able to access my account, yet I can't access other parts of the store, I am in greece on a macbook pro

I am from the states and am in Greece on vacation. I have a good wifi connection yet keep getting a connection timed out error when I try to access the itunes store. It is funny because pending downloads show up in the cue, and they download no problem. I can also open my account. When I try to go the the movies or music section of the stor though it just times out. I tried updating to the latest itunes software and restarting, also I checked all the proxy boxes in the network section of the settings then unchecked them all and restarted and it keeps doing the same thing. Any help would be appreciated.
Thanks

Welcome to AD!
There's been plenty of posts about Norton & the removal tool here. Unfortunately many folks seem to not even know it comes pre-installed on most PCs! Even a trial version, never used or long since expired can cause problems - and not just with iTunes.
Anyone with a Dell, HP, Gateway EEE PC, Asus ..... what Windows PC manufacturer does NOT have this junk software pre-installed?
Almost all of them have made deals with Symantec to pre-install it.
Horrible, horrible software.
Anyway, glad you finally solved your problem.

Fix network connection timed out error 3259

How do I fix network connection timed out error 3259?

Here is apple article on this error. Basically, disable your firewall and other security software.
http://support.apple.com/kb/TS2799

Network connection timed out (Error -3259)

I've been REPEATEDLY getting "Network connection timed out (Error -3259) for two specific TV shows I'm trying to download. Other shows and songs are downloading just fine, which indicates there is nothing wrong with the network.
I have already tried deleting the temporary files from the DOWNLOADS folder, but no luck.
I have also tried restarting these two epispodes DOZENS of times.
I've heard from various web sites that Itunes will not work properly with internet service from Time Warner. Is this true? I have no way to change my ISP as TW is all that's available to me.
Since the series is sequential, I want my money back for all the episodes after the first one I can't download, or to make alternate arrangements to FTP the files directly rather than using the Itunes Store. How do I go about doing this?

Here is apple article on this error. Basically, disable your firewall and other security software.
http://support.apple.com/kb/TS2799

Samba and fusesmb: "connection timed out" error

Hello to everyone!
I'm facing a weird problem here: since a couple of days I cannot use fusesmb anymore: I can still "see" the SMB network shares that are present on my LAN, but as soon as I try to enter one of those I get a "connection timed out" error.
First of all I tried to reinstall fusesmb, to no avail. Then I tried to use smbclient directly:
[tudhalyas@paranor ~]$ smbclient -L <my_windows_box_IP>
This command correctly shows the list of shares that are present on my winXP box, and
[tudhalyas@paranor ~]$ smbclient \\\\<my_windows_box_IP>\\SharedDocs
creating lame upcase table
creating lame lowcase table
Enter tudhalyas's password:
Domain=[WINBOX] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager]
smb: \>
allows me to go into the "Shared Docs" folder of the said computer. From here I can flawlessly download files from the share.
Reading this thread I thought that samba 3.5.1 could be the culprit, and so I compiled samba 3.4.7 through ABS and then installed it. Sadly, fusesmb still doesn't work. I even tried to use smbnetfs, but again to no avail.
Does anyone of you know what I could do to address this issue? Thanks in advance!

bump... can anybody help me please?
Last edited by Tudhalyas (2010-05-05 18:58:47)

Connection Timed Out error when I try to access Alert Inbox

Hi experts,
I have not been looking at my alert inbox for a while and I suspect it's very full.
When I tried to open the alert inbox from RWB, I encountered the following error:
<b>500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Mon May 07 11:08:51 2007
Module: icxxthr.c
Line: 2646
Server: ootspdbs02_PI1_01
Error Tag: {-}
Detail: Connection to partner timed out after 60s
</b>
All other functions of the RWB is working fine, including Alert Configurations.
I tried restarting the J2EE instance, but it did not help.
I've checked the SICF services, and they are fine.
I suspect the alert inbox is trying to load a huge amount of data, so it is timing out.
How can I adjust the keep_alive_timeout setting in this case?
When I look into RZ11, I am unable to edit this entry.
Please help.
Thanks.
Ron

Hi Ron,
Follow these steps:
1. Try restarting the JAVA Stack.
2. ST22 check out any Dump.
3. In RWB --> Component Monotring --> check the Cache connectivity test...is all are Green ( Glowing )
Check these SAP Notes 750287,900896,768456
If that doesnt work out, check this SAP Note 840849
Regards,
Prateek

Require help to solve Connection timed out error while reload initial data

Dear Developers,
I have installed SAP NetWeaver and SAP ME SDK 2.0 on my laptop and working from offshore, the SAP ME WIP and ODS database is situated at onsite. The installation is working fine, however, after developing Activity Hooks, at the step where I need to Reload Initial Data for the Site where I want the Activity to be used I get the below error message:
500 Connection timed out
Error: -5
Version: 7011
Component: ICM
Date/Time: Wed Mar 07 12:37:38 2012
Module: icxxthr.c
Line: 4184
Server: <laptop_hostname>_<SID>_00
Error Tag: {-}
Detail: Connection to partner timed out after 600s
© 2001-2009, SAP AG
How to find out what is causing this error? When I use the hostname of the onsite SAP ME application pointing to the same database, Reload Initial Data works fine. I need to reload initial data from laptop SAP ME application only, beacause the activity hook classes reside on my laptop, before I send the SAPME.sca files for common server build.

Hello,
Please try to increase PROCTIMEOUT ICM parameter for the corresponding server\port. If it does not help, please, check NW default traces for ME errors and share your results with us.
Best regards,
Alex.

I cant dowload 4.3.3. i get a connection timed out error message

i cant dowload 4.3.3. i get a connection timed out error message

If you are getting a network timeout error when downloading an iOS update then try temporarily turning off all your firewall and antivirus software until the download has completed.
In terms of whether an update is coming, we are just fellow users on here so we won't know when the next update might be, and what might or might not be in it.

Cannot login to Facebook on my iPhone 5 iOS 8.1 - Connection timed out - Error signing in

The other day, I had logged out of Facebook on my iPhone, and when I tried logging back in, it wouldn't let me. When I try to log in through the settings page, it stays on verifying for a while and says "Error signing in" and tells me there is no internet connection and when I try logging in through the facebook app, it says "Connection timed out" and asks me to make sure i have an active internet connection. The fact is my internet is working, and I can log in to facebook through safari, but not my app.
And one more thing. I have tried most of the methods mentioned in the forums. I have spent the last 2 days trying all of them from trying to create a new account using the old details, remove the phone number from facebook and try again, hard reboot by pressing the home and power buttons, resetting network and privacy settings, and reinstalling the app about 3-4 times. None of these work.
I'd be grateful if somebody can help me out with this .
Phone specs: iPhone 5, 16GB memory, iOS 8.1

Dear Sir,
I did some research about your subject and I found these, please check it out
iPhone stuck on Apple logo!!! PLEASE HELP!
It may help you
<Link Edited By Host>

Add-on connection timed out Error

Similar Messages

Maybe you are looking for