Add one field on the screen.
hi ,everybody.
i want to add one field on the progam SAPMV10A,it is VD05,The screen number is 300.the field name is TVLV-ABRVW.How can i do,thank you.
Check here:
SPRO --> Financial Accounting --> Accounts Receivable and Accounts Payab;e --> Customer Accounts -> Master data --> Preparations for creating customer master data --> Adoption of Customer's own master data fields --> Businees Add-in:....
Similar Messages
-
Add one column to the screen exits
Hi All
I am doing Screen Exits,
here i have to add one column to the screen
and it have to retrive the data from the specified fields
anyone plz give me the solution.Hi
which screen exit?
Max -
In BDCs, after adding one field to the screen, which one is the better proc
Hi,
My client requirement In BDCs, after recording the legacy data by using MM01, After some time adding one field to the screen, How can we record the for the new field.
If any one knows pls help me total process.
Warm regards,
Venkat.Identify the screen in which this new field is added and simply add one more line to add the bdc record for this field in that screen.
If the screen is also entirely new, then you have to identify the previous screen, the okcode to go to this new screen and finally the next screen and the okcode to go to the next screen along with the field BDC record.
I don't think it is necessary to redo all the recording as long as you can follow the existing code. -
How can i add one field in the container for the standard task-90310004?
Hi,
Please let me know thw steps to add one field in the container for the standard task-90310004.
Usefull suggestions will be rewarded.
Regards,
Neslin.<b>Hi,
Containers are used for holding Application data for Workflow purposes.
Event container
Task container
Workflow container
Role container
Binding is the linking of data from one container to the other for making data available all across the workflow.
But you can get values from one container to another container like this
Container(Con)
1. WF Con to Role, Wf con to task con, Wf con to event
and
2. Event con to wf con, task con to wof con
and
3. Method con to task con
and
4. Task con to method con
So, we don't have direct possible binding from task con to task con.
Thanks and Regards,
Prabhakar Dharmala</b>
Message was edited by:
Prabhakar Dharmala
But you can do pass values from first task con to wf con and again from wf con to another task con -
Add another field in the screens of Transaction MB21/MB22/MB23
Dear all,
We have a requirement to add an extra field BDZTP(Time that reservation quantity required) while creating, changing or displaying reservations manually.
We are currently using SAP 4.6c. I tried looking for screen exits and BADIs for the transaction MB21 but couldn't find any in this version. However, I found out that there are BADIs for MB21 in ECC 6 but I still dont know if those BADI's can help me achieve the required result.
The field is available in the table RESB and it is not a customer field. Is there anyway to fulfill this requirement?
Needless to mention, helpful answers will be awarded.
Thanks.
Faisal.Hi Faisal.
you could create a new field in trasaction mb21/mb22/mb23 because I too am needing to create a new field of vision of the item / material.
Thank a lot for the help. -
Add new fields on the header screen of COR1
Hi Experts,
I am new to this type of work, please help me in doing....
My requirement is, to add one field on the header details of the COR1 from a Z table.
Can anyone please tell me how to handle this.
I searched the regarding this in SDN but i had not got any solution.
Can any one please tell me how to handle this(screen shots will be more helpfull).
Please take it as priority.
Thanks in advace,
Kruthik
Edited by: kruthik_06 on Jun 20, 2011 9:04 AMHi all,
I need to know if is it possible to add a custom field in COR1 for process order. I searched forum for something about this, but cannot find anything.
can anybody please suggest me something ?
thanks
Kruthik -
Hi ,
I need to add one field in MM02 screen.
Can u help me in this please.
I need to do this by using screen exit ,how to do this?
can u......
Regards,
KalidasHi Kalidas,
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya. -
Add one field in standard report
Hi all,
I want to add one field in the standard report WS_MONITOR_OUTB_DEL_FREE.
For this I didn't find any User exit or BADI? What is the procedure to add the field in the standard report
regards,
RamaHi Ram,
it would be very difficult for you to find an enhancement for such a requirement.
Though i can suggest you to do following analysis and then decide.
See which version you are using if you are using ECC5.0 or above you can use implicit enhancement to append field to the final structure of your report as using implicit enhancement you can add fields to structures.
then find another implicit enhancement to populate this field in your structure.
thanks -
Add Custom field to standard screen with table control
Hello,
I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
Do i need to write any code?
I'm new to ABAP so could you please give a detailed explanation.
Also, do i need to change the 'fixed columns' field in the table control?
Regards,
Monica.hi,
1) find the screen
2) add new fields to the screen
3) program PBO and PAI
regards,
Wojciech -
Add new field in the delivery document
Dear Guru ,
I want to add one Field in the delivery document and that should be open after PGI done .Can you please help how to create one additional field in the delivery document.
Thanks in advance ..
Regards,
Abhijit ...............Dear Abhijit
Even after doing PGI, there are some fields which are in editable mode in delivery. For example, in VL02N, if you select "Goto --> Header --> Shipment, you can see fields like Bill of Lading are in editable mode.
If you specify what your requirement is, then probably, a better option can be given.
Thanks
G. Lakshmipathi -
How to add a field to the selection screen and when the user enters ...
hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.Hi Kripa,
If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
c_no(10) TYPE c DEFAULT '9D0161',
u_id(15) TYPE c,
password(15) TYPE c,
r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh. -
Need to add more field in the selection screen in tcode crm_dno_monitor
Hi,
In the transaction code crm_dno_monitor, i need to add extra fields in selection screen. Do we have any way to add fields in the standard tcode crm_dno_monitor.
Thanks
PrasadIf you need to add 5 fields on ticket screen then use EEWB enhancement.
The ticket screen transaction is crmd_order which even opens up after you double click the ticket no from crm_dno_monitor report list.
for crm_dno_monitor you can have the BADI CRM_DNO_MONITOR which will add later the column for the fields which you can add using EEWB
Check the following blog which guide you for custom field creation using EEWB
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii -
Add one hyperlink on the login screen on the SRM5.0
HI,My experts :
I work in SRM 5.0 ,ROS,internal ITS.
Now I want to add one hyperlink on the loin screen .The potential vendor can click the link to register .
I find the OSS:778488 ,and know that se80 ,to change "CL_SRM_ICF_BASIC_LOGIN".But the need the detail steps .
I will appreciate your help very much.
BR!
Alex!I did nit find the mothd ,I changed the exsit link .Thanks.
-
How can we add additional fields to the BP Search RESULT screen?
Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM -
Add description fields to the demand simulation screen on CTM
Dear SAP Gurus,
We have a requirement to add the description fields to the demand simulation screen inside the CTM, do you know how to do this? The description fields are not available in the standard layout, I couldn´t find any exit or BADI to insert more fields on the screen.
Do you have any suggestion?
Thanks and BR
MauricioThanks for your reply
BADI - UKM_BP_ADD_FIELDS
Documentation of this BADI shows as follows...
With this BAdI, you can define additional business partner attributes that you define in a business partner master record and want to use as fields in the formula editor.
To use the new fields, implement the BAdI: Formula Parameters and Functions (UKM_EV_FORMULA)
Methods of this BAdI:
FILL_FIELDS
To provide additional fields for the formula editor
FILL_ADD_INFOS and SAVE_ADD_INFOS
To define additional information for the following data in table form:
Collateral
Negative event
Check exceptions
Credit insurance
I enhanced the structure(UKM_S_BP_CUSTOMER_EXTENSION) with new custom fields from the badi UKM_BP_ADD_FIELDS but there is documentation for creating the new screen to place those new fileds i created on transaction UKM_BP.
I have looked at BDT Business data toolset
http://help.sap.com/saphelp_crm50/helpdata/en/2f/696d360856e808e10000009b38f839/frameset.htm
but i didn't get any idea ...
Can you please elaborate and let me know how to do this for my requirement?
Thanks
Govi
Maybe you are looking for
-
Vendor Open Item Analysis by Overdue Items
Hi Freinds, The users desire to generate the Vendor Open Item Analysis by Overdue Items. When the report is generated using the Program RFKOPR10, the report gives the list of Vendors with the details of overdues as per the buckets selected. However,
-
I restored my ipod touch however the apps will not sync. I tried to re-download but I changed my apple id as my old id is no longer a valid email address. Any ideas out there please?
-
Dock.app Crashes on Yosemite
After an upgrade from Mavericks to Yosemite, my system reports that the Dock.app is crashing. These are the issues; Desktop Background is black and will not update via System Preferences Screen Saver does not launch and fails to use "Hot Corners" Sp
-
ADG more than one rendererProvider
I have a ADG with grouping, I pull in an extra field that does not get summed just displayed. So I have Accounts and Account addresses. The addresses being the 2nd column in the grid works perfect. But I want to pull in a 3rd column "City" but all I
-
MPEG Streamclip 1.5.1 Help Needed....
Im having a problem with MPEG Streamclip 1.5.1.. What im trying to do is take a Divx 5.0 video (avi encoded with Handbrake) and edit it into clips without recompressing the clip... Streamclip will let me do this.. However, after I make my edits, and