Add OWN property to the weblogic.properties
Hi.
I tried to add my own property to the weblogic.properties.
ERROR: "Found undeclared property"
Is it at all possible?
TIA,
If you simply want to define a Java System property, you can do that
like so:
java.system.property.my.property=foo
This has the same effect as using the -Dmy.property=foo argument to the
JVM and is retrievable programmatically by calling
System.getProperty("my.property")
Hope this helps,
Robert
Daniel Ilkanayev wrote:
Hi.
I tried to add my own property to the weblogic.properties.
ERROR: "Found undeclared property"
Is it at all possible?
TIA,
Similar Messages
-
Commas in the weblogic.properties file
I hate to ask this question because I'm sure the answer is a)obvious, and
b)well-known, but I'm playing in the slow group today.
How does one include a comma in a property value in the weblogic.properties
file. Specfically, I'm trying to set weblogic.system.startupArgs as follows
weblogic.system.startupArgs.xxxx=sql=select sysdate from dual where
mod(to_number(to_char(sysdate, 'MI')), 2) = 0
The value assigned to the "sql" arg is truncated at the first comma and a
second argument "'MI'))" is created. Very irritating. Any ideas on how to
prevent this from happening?
Ignore the details of the sql statement, its just for testing.
Brian Murray
Management Information Systems
Vanderbilt UniversityThanks for the reply, but that didn't seem to work. Escaping the commas
with back-slash delivered the same result.
It seems that since the value for the weblogic.system.startupArgs.xxxx
property can itself be a set of multiple properties, the normal parsing
rules don't apply when the "inner" set of properties is parsed. For
example, if weblogic.properties has
weblogic.system.startupArgs.xxxx=aaaa=X\,Y
then it appears that "startupArgs.xxx" is being assgined "aaaa=X,Y".
However, when the startup class gets the arguments, whatever routine is
parsing the value of "startupArgs.xxx" is seeing the comma and deciding that
there are two properties, not one. So the startup method of my startup
class gets 2 arguments: "aaaa=X" and "Y=".
I tried all the old Korn shell tricks I could remember like aaaa=X\\\,Y.
But all I got was "aaaa=X\" and "Y=".
Any other thoughts or am I trying something I wasn't supposed to do?
----- Original Message -----
From: "Dimitri Rakitine" <[email protected]>
escape commas with \'s
Brian Murray <[email protected]> wrote:
How does one include a comma in a property value in the
weblogic.properties
file. Specfically, I'm trying to set weblogic.system.startupArgs asfollows
>
weblogic.system.startupArgs.xxxx=sql=select sysdate from dual where
mod(to_number(to_char(sysdate, 'MI')), 2) = 0 -
[svn] 2861: Add 'resizeMode' property to the Group.
Revision: 2861
Author: [email protected]
Date: 2008-08-15 16:52:48 -0700 (Fri, 15 Aug 2008)
Log Message:
Add 'resizeMode' property to the Group. Setting this to "Scale" will turn on the 'resize-by-scale' behavior.
Reviewed by Glenn
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
flex/sdk/trunk/frameworks/projects/flex4/src/flex/layout/LayoutItemUIC.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
Added Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/ResizeMode.asHi,
In this link you can find: Introduction to the KMC Platform->Collaboration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Knowledge%20Management%20and%20Collaboration%20Developers%20Guide.html
Patricio. -
Where is the weblogic.properties file in weblogic6.1?
I could only find this file in directory: ..\wlserver6.1\samples\examples\tutorials\migration\banking
why i cannot find it in wlserver6.1 directory? Is there any other properties file
whose function is the same as this one so that i can change setting?
Thanks in advance,
moonriverThe weblogic.properties file is only used for weblogic 5.x, it is no longer used
in 6.x anymore. Instead, a config.xml file is used as similar purpose.
Allen.
"Moonriver" <[email protected]> wrote:
>
I could only find this file in directory: ..\wlserver6.1\samples\examples\tutorials\migration\banking
why i cannot find it in wlserver6.1 directory? Is there any other properties
file
whose function is the same as this one so that i can change setting?
Thanks in advance,
moonriver -
How to add own CustomXPathFunctions to the JDev XPath builder
Hello,
I'd be interested to know, if it is possible to add my own CustomXPathFunctions to the JDeveloper BPEL designer so that the XPath builder would recognize them and provide the helps in building the expression. Now, all my own functions are not recognized by the XPath builder although the BPEL engine can run them.
Best regards,
TommiHi,
I think this is not possible in the current release. -
Add weblogic.properties to the weblogic.
hi people
how do i can to tell to the weblogic to start with another
weblogic.properties when he starts,
that is, to start with the weblogic.properties and other property into
another directory ?
any help will be appreciated
You can set the system property weblogic.system.name:
java ... -Dweblogic.system.name=foo ... weblogic.Server,
and create directory 'foo' and put server-specific weblogic.properties
there.
ruben <[email protected]> wrote:
> hi people
> how do i can to tell to the weblogic to start with another
> weblogic.properties when he starts,
> that is, to start with the weblogic.properties and other property into
> another directory ?
> any help will be appreciated
Dimitri
-
Help: why I cannot find the weblogic.mycluster.properties file
When I first config the cluster. While Setting up the weblogic.properties
Files, Open and read the cluster properties file (installed by default as
weblogic/mycluster). Any properties set in the cluster properties file will
override the same properties that were set from the global properties file.
But I cannot find this file, Also I copy the weblogic.properties to
weblogic.mycluster.properties,Also,I cannot find the
weblogic.cluster.enable=true,etc.
thanks
It is required to put it in command line.
Cheers - Wei
Atish Ray <[email protected]> wrote in message
news:[email protected]...
> What happens if I set this property thru the properties file ? It still
> works. Is there a known problem on this ?
>
>
>
> Wei Guan wrote in message <[email protected]>...
> >Yes, the default cluster name is mycluster.
> >
> >Create an directory named 'mycluster' under your weblogic home, copy
> >weblogic.properties to mycluster/weblogic.properties will do the trick.
> >
> >weblogic.cluster.enable=true has to be set via command-line. That is, add
> >'-Dweblogic.cluster.enable=true' in your startup script.
> >
> >--
> >Cheers - Wei
> >
> >
> >
> >hhb <[email protected]> wrote in message
> >news:[email protected]...
> >> When I first config the cluster. While Setting up the
weblogic.properties
> >> Files, Open and read the cluster properties file (installed by default
as
> >> weblogic/mycluster). Any properties set in the cluster properties file
> >will
> >> override the same properties that were set from the global properties
> >file.
> >> But I cannot find this file, Also I copy the weblogic.properties to
> >> weblogic.mycluster.properties,Also,I cannot find the
> >> weblogic.cluster.enable=true,etc.
> >>
> >> thanks
> >>
> >>
> >>
> >
> >
>
>
-
Add weblogic.properties
hi people
how do i can to tell to the weblogic to start with another
weblogic.properties when he starts,
that is, to start with the weblogic.properties and other property into
another directory ?
any help will be appreciatedruben <[email protected]> wrote:
> another cuestion,
> i have into the starting of the weblogic this sentences:
> lun nov 27 12:56:49 GMT+01:00 2000:<I> <WebLogicServer> Read global
> properties c:\weblogic\weblogic.properties
> lun nov 27 12:56:49 GMT+01:00 2000:<I> <WebLogicServer> No per-server
> properties files found
> how do i config the weblogic to have yes into per-erver properties file
> found
This means that you have directory with the same name as system name, but there
is no weblogic.properties file there.
The order in which weblogic reads weblogic.properties files is like this:
weblogic_home/weblogic.properties
weblogic_home/cluster_name/weblogic.properties (if clustering is enabled)
weblogic_home/cluster_name/system_name/weblogic.properties
or
weblogic_home/system_name/weblogic.properties (if clustering is disabled)
Dimitri
-
Multiple weblogic.properties files?
Hi all,
We're in the stage now where I need to "quickly" switch between different
versions of our app running on WLS 5.1.
Can I pass the path to the weblogic.properties file to the java command in
startWebLogic, or is it based solely on the weblogic.home property?
If it is based on the weblogic.home property, what else depends on that
property. Ideally, I'd like to not to have to duplicate the weblogic tree.
Thanx!
Will Hartung
([email protected])You can specify server name in the command line (startWebLogic.cmd foo)
and add -Dweblogic.server.name=%1 to the list of java arguments. When
weblogic starts it will read wl_home/weblogic.properties first and
wl_home/foo/weblogic.properties second.
(with clustering enabled it reads weblogic.properties from wl_home
first, wl_home/cluster_name second and wl_home/cluster_name/server_name
third).
Will Hartung <[email protected]> wrote:
Hi all,
We're in the stage now where I need to "quickly" switch between different
versions of our app running on WLS 5.1.
Can I pass the path to the weblogic.properties file to the java command in
startWebLogic, or is it based solely on the weblogic.home property?
If it is based on the weblogic.home property, what else depends on that
property. Ideally, I'd like to not to have to duplicate the weblogic tree.
Thanx!
Will Hartung
([email protected])
Dimitri -
How to get the weblogic.httpd.session.timeoutSecs value in a JSP file
Hi,
We are using Weblogic 5.1 SP8. We set weblogic.httpd.session.timeoutSecs=900 in the weblogic.properties file. How can I get this value in a JSP file if I don't use java.util.Properties to parse the properties file?
Can I use session.getValue(sessionName) to get it? If so, what is the session name for this property?
Thanks.
Frank
I think something like this should work:
T3ServicesDef services = T3Services.getT3Services();
services.config().getProperty("weblogic.httpd.session.timeoutSecs");
Frank Yu <[email protected]> wrote:
> Hi,
> We are using Weblogic 5.1 SP8. We set weblogic.httpd.session.timeoutSecs=900 in the weblogic.properties file. How can I get this value in a JSP file if I don't use java.util.Properties to parse the properties file?
> Can I use session.getValue(sessionName) to get it? If so, what is the session name for this property?
> Thanks.
> Frank
Dimitri
-
Hello,"
How can I add own steps to the selection menu, so that I can insert them with "Insert Steps" in my sequence?
regards
samuelThank you Mike,
I have now the problem, that all properties of the created step(steps created with CVI) which I add with "specify module" (double klick on the new created step in Type palett->Substeps->Specify Module ) are not available when I add this step in my sequence. what is the problem here?
regards samuel -
Can someone please tell me how the <servlet> entry differs from
weblogic.httpd.register.snoop=examples.servlets.SnoopServlet
in weblogic properties?
Do these perform identical functions?
Yes this is the source of my confusiong. It seems to be that WL can be told
about servlets
two ways. Firstly through the web.xml file and also via weblogic.properties.
I don't understand
why the second one exists.
"Cameron Purdy" <[email protected]> wrote in message
news:[email protected]...
> I only work with WAR files, so I cannot speak to non-WARd servlets with
any
> confidence. I know that WL could use web.xml for non-WARd servlets in
order
> to obtain the other information associated with the servlet:
>
> <!ELEMENT servlet (icon?, servlet-name, display-name?, description?,
> (servlet-class|jsp-file), init-param*, load-on-startup?,
> security-role-ref*)>
>
> --
>
> Cameron Purdy
> http://www.tangosol.com
>
>
> "Robert Nicholson" <[email protected]> wrote in message
> news:[email protected]...
> > If what you say is true then why is there the need to also tell WL about
> the
> > servlets themselves?
> >
> > Presumably this is for when the servlets exist outside of a WAR then?
> >
> > "Cameron Purdy" <[email protected]> wrote in message
> > news:[email protected]...
> > > The weblogic.properties tells WL to load a WAR or specific servlet.
The
> > > <servlet> entry (I assume you refer to
> > > http://java.sun.com/j2ee/dtds/web-app_2_2.dtd) defines the presence of
a
> > > servlet within a WAR (a deployment unit):
> > >
> > > >
> > > The servlet element contains the declarative data of a
> > > servlet. If a jsp-file is specified and the load-on-startup element is
> > > present, then the JSP should be precompiled and loaded.
> > > [end-quote]
> > >
> > > In the case of a WAR deployment, you have to tell WL that the WAR
> exists,
> > > then it will look in the WAR and figure out what servlets are there
from
> > the
> > > <servlet> tags in your web.xml. You set up a WAR in the
> > weblogic.properties
> > > as such:
> > >
> > > weblogic.httpd.webApp.<http-path>=<os-path>
> > >
> > > For example:
> > > weblogic.httpd.webApp.website=c:/weblogic/website.war
> > >
> > > --
> > >
> > > Cameron Purdy
> > > http://www.tangosol.com
> > >
> > >
> > > "Robert Nicholson" <[email protected]> wrote in message
> > > news:[email protected]...
> > > > Can someone please tell me how the <servlet> entry differs from
> > > >
> > > > weblogic.httpd.register.snoop=examples.servlets.SnoopServlet
> > > >
> > > > in weblogic properties?
> > > >
> > > > Do these perform identical functions?
> > > >
> > > >
> > >
> > >
> >
> >
>
>
-
Reloading weblogic.properties without restarting
Hi,
I would like to know how to reload the weblogic.properties file without
having to restart Weblogic. I have already read that the development of a
class responsible for loading the properties would help, but I don´t know
how to...
Thanks in advance,
SERGIO.The easiest way to hot deploy new web-apps is to migrate to WLS 6.0...
Sergio wrote:
Hi Robert,
Thank you for your answer. I´m trying to deploy new webapplications at the
time that a new request is made and I don´t want to let the other running
applications without connection when restarting the WebLogic Server. Do you
know how to make that? Perhaps the solution is to make several null entries
and deploy pseudo-generations (because they already exist, but empty) of
webapplications by filling the content of a null entry... But perhaps
reserves Weblogic a great amount of memory for each null entry, even when
they are empty...
Thanks a lot,
SERGIO
"Robert Patrick" <[email protected]> wrote in message
news:[email protected]..
The WebLogic Server will only read the weblogic.properties file atstartup.
You cannot force WebLogic to re-read the rpoperties file withoutrestarting
the server. What are you trying to do that requires theweblogic.properties
file to be re-read? There may be some other way of accomplishing what you
are trying to do...
Sergio wrote:
Hi,
I would like to know how to reload the weblogic.properties file without
having to restart Weblogic. I have already read that the development of
a
class responsible for loading the properties would help, but I don´tknow
how to...
Thanks in advance,
SERGIO. -
Having a timer started by weblogic.properties
Hi,
I have an event that should happen reoccurring at a fixed time interval.
From the documentation, it looks like weblogic's timer service will do
this relatively straight forward. The only 'but' is that the timer api
requires me to instantiate objects and then schedule them. I would want
to have my reoccuring event start happening automatically rather then
having to hit a page that will in turn execute my java code that
schedules the event.
I would think that there should be a place maybe in the
weblogic.properties. Any ideas what to do about this case?
Thanks a lot,
Hari Nam Singh
[email protected]Thanks a lot Dimitri! That's exactly what I was looking for.
Dimitri Rakitine wrote:
http://www.weblogic.com/docs51/classdocs/API_startup.html
Hari Nam Singh <[email protected]> wrote:
Hi,
I have an event that should happen reoccurring at a fixed time interval.
From the documentation, it looks like weblogic's timer service will do
this relatively straight forward. The only 'but' is that the timer api
requires me to instantiate objects and then schedule them. I would want
to have my reoccuring event start happening automatically rather then
having to hit a page that will in turn execute my java code that
schedules the event.
I would think that there should be a place maybe in the
weblogic.properties. Any ideas what to do about this case?
Thanks a lot,
Hari Nam Singh
[email protected]
Dimitri -
Moving weblogic.properties
I want to be able to move the weblogic.properties file out of the
weblogic home directory. This is for a single weblogic instance running
(no clusters). Does anyone know if this can be done? Is yes, how?
Thanks,
RajivI think i was wrong.
The properties file has to be present, relative to weblogic.system.home
Kumar Allamraju wrote:
set weblogic.system.propertiesFile=[path to your properties file name]
more info @
http://www.weblogic.com/docs51/adminhelp/AdminPropertyHelp.html
Kumar
Rajiv Nair wrote:
I want to be able to move the weblogic.properties file out of the
weblogic home directory. This is for a single weblogic instance
running
(no clusters). Does anyone know if this can be done? Is yes, how?
Thanks,
Rajiv
[att1.html]
Maybe you are looking for
-
How do I restore a Time Machine backup from a newer MacBook Pro to an older MacBook Pro?
My MacBook Pro is in the shop and am using my older MacBook Pro in the meantime. I want to restore my older computer with the lastest backup from my newer computer, but I'm not able to see/access the backups from my newer computer - I can only see th
-
Can I have multiple iCloud accounts?
If I can have multiple iCloud accounts, where and how do I set the up? I cannot find the option under the iCloud settings in system preferences. I have a personal and two different work emails with calendars I would like to sync.
-
Error in psa level - Request not updated to any data target using delta
Hi, This is pavan and am facing this issue any one know for below issue to solve. Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come to psa level but from here it is not updated to infocube so for that i have trie
-
HT3825 How to view RAW from Canon 5D mark III for OS 10.6
To 'Preview' RAW files from Canon 5D mark III, it is known that you need to install the Digital Camera RAW Compatibility Update 3.12 , but it can only be used with iphoto 9, which in turn only work in OS 10.7, so there is no way for 10.6 users to 'Pr
-
This gets the alv to popular without any errors but the column names are blank on top. Any ideas? CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' EXPORTING i_program_name = sy-repid i_structure_name = 'ZFI_CONTRAC