Add row fails to duplicate formula

Page 56 of the Numbers '09 User Guide says that if all the body cells above a cell in an inserted row contain the same formula, that formula is copied into the new cell. This isn't happening when I try it.
It's easy to reproduce - just make a blank sheet and put the formula =B2 into C2, then duplicate it downwards (corner drag) into a bunch of rows. Insert a new row in the middle of that, and the new C cell is empty. This fails even when there's no header row.
Can anyone tell me why this isn't working?

The User Guide is not "the specifications".
Us users never see "the specifications".
The User Guides contains a lot of wrong descriptions of applications features.
When I report such thing I get a response saying that "the program behaves as it is designed to do".
I sent a report about this discripency but I am quite sure of the response.
Your tracking number for this issue is Bug ID# 6860995.
Hello
+May you look at the thread:+
+http://discussions.apple.com/thread.jspa?messageID=9426677+
+A user assumes that what we may read page 55 of the English Numbers User Guide:+
+"If all the body cells in a column above the new row contain the same formula or cell+
+control, the formula or cell control is repeated in the new row."+
+means that if we insert a row in the middle of a column filled with a given formula the program must put this formula in the newly created cell.+
+The program doesn't behave s this way. The new cell is blank.+
+The described behavior is matching what we get when the row is added at the bottom of the column.+
+What is wrong,+
+the program or the User Guide ?+
+My guess is that it's the User Guide.+
+If the program behaves as it is designed to do, a Technote explaining that would be welcome.+
Yvan KOENIG (from FRANCE mercredi 6 mai 2009 12:20:31)

Similar Messages

Matrix Add Row and Duplicate Row

Hi All,
Can anybody suggest me how to work on Add row and duplicate row in any document table.
Lets take one example
Sales order document
In this doc we have table format where we specify item no, item description etc. In this table when we right click on particluar row we have option for add, delete, duplicate rows..etc.
wht i would like to know is that when we click add row .....one row is added and number is incremented under # column. Hw to perform and display this auto increment/ decrement of number for these rows under this # column
thanks
harish

Hi,
I tried following both code, but in that i am geting value. Means i am getting .Value Why i not getting value.
matrix.Columns.Item("V_-1").Cells.Item(pVal.Row).Specific.value = matrix.RowCount
and i also tried for "AddRow",
If pVal.BeforeAction = False Then
                Select Case pVal.ItemUID
                    Case "AddRow"
                        matrix = form.Items.Item("mtr").Specific
                        If matrix.RowCount > 0 Then
                            If Trim(matrix.Columns.Item("V_-1").Cells.Item(matrix.RowCount).Specific.value) = "" Then
                            End If
                        End If
                End Select
            End If
In both example i not getting .Value.
Plz tell y ?
Thanks

Add row in tabular form fails, "gErrItems is undefined"

I'm struggling to get Apex working on my new laptop.
Apex 4.1.1, Oracle 10.2.0.5, Windows 7 64 bit.
I click 'Add row' on the detail region (the tabular form) on my Master - Detail page.
The row appears, but after clicking 'Apply changes' it's gone again.
Using Firebug, I see that the javascript causes an "gErrItems is undefined" error, something coming from apex_4_1.min.js
The same application works fine on apex.oracle.com, so it's the installation on my laptop.

It seems to be a problem with apex_listener under Glassfish.
I'll post in the proper forum again.

Clone Rows - Tabular form - Client side add rows

Hello all,
I feel in love with this particular Tabular form, http://htmldb.oracle.com/pls/otn/f?p=24317:49 because of the Capabilities it has to create a "clone row".
a very advance feature I like a lot.
The trouble is when I go under >Report> and select which columns I would like to view, some will be hidden with default values.
the default values I would like to keep hidden are: a Time Stamp, and :APP_USER.
So when the user decides to clone a row the first original row will stay intact with all the information including the hidden values, but as for the cloned rows the hidden values are missing.
Is there something missing in the javascript that permits this from happening?
Please Help.
<script type="text/javascript">
var g_this;
function fn_delete(pThis)
var l_tr=$x_UpTill(pThis,'TR');
l_tr.parentNode.removeChild(l_tr);
function fn_CloneRow(pThis){
g_this=pThis;
l_tr=$x_UpTill(pThis,'TR');
l_table=$x_UpTill(l_tr,'TABLE');
l_tbody=$x_UpTill(l_tr,'TBODY');
l_clone=l_tr.cloneNode(true);
html_RowHighlight(l_clone,"D0D0E0");
l_inputs=l_clone.getElementsByTagName('input');
for (var j=0;j<l_inputs.length;j++) {
l_this=l_inputs[j];
if (l_this.type=="hidden") l_this.value="";
if (l_this.name=="fcs") l_this.value="zzzz";
if (l_this.type=="checkbox") l_this.parentNode.removeChild(l_this);
// Change Clone functionality to Delete
var l_img=l_clone.getElementsByTagName('img')[0];
l_img.src="/i/delete.gif";
if (document.all) l_img.onclick=function(){fn_delete(this)};
else l_img.setAttribute("onclick","fn_delete(this)");
l_tbody.insertBefore(l_clone,l_tr.nextSibling?l_tr.nextSibling:l_tr);
</script>

I have't looked at the specific clone-row sample code you mentioned in your post, but just wanted to point out that we've introduced client-side add-row functionality in APEX 4.0, so if you're using this code to add new rows on the client-side, then using the built-in functionality might be easier. Of course if you actually want to get a copy of an existing row, that might not be sufficient. As for the MRU process, the way APEX identifies new rows is by looking at the primary key or ROWID column value, which needs to be NULL. APEX also looks at the apex_application.g_fcud array, which holds information for each row on whether to do an create, update or delete. This array was introduced in APEX 4.0, and that's what could potentially be causing your example to fail after the upgrade.
Regards,
Marc

Adobe Form (add row to flowed table )

Hi, experts
I have a problem.
I need add a row to subform flowed table , but when i want to see preview a get an error:
"Invalid inumerated value: indexChange
the fault occured on line 1532.
Script failed ( language is formalic; context is xfa[0].form[0].data[0].#subform[0].SubFormTable[0].Table1[0].Row1[0])
script =
ERROR: no expression encountered -- script result is undefined
How can i solve this problem or how add row to flowed table in different way.
Thanks
Larissa

Larissa,
Did you drag the Table element from standard library and used the first option of Create Simple Table? This should make the table static and you cannot add a row. Select the second option while creating a table and choose "Body Rows vary depending on data".
Now drag-drop a button element from the standard library and in the click event make sure you have following code in JavaScript:-
Table1.Row1.instanceManager.addInstance(1);
Chintan

Matrix Add Row

hi guys,
I created one form in screen painter and used this form in VB.net. In this form one grid is available.
In the menuevent of this form I write the code for open the form when user click on menu. I also write the code for add row in the matrix.
When I open the form first time both opening the form as well as adding row into the matrix works fine.
After closing the form and open the form second time menuevent occur more than 2 times.
Due to this many rows are added in the matrix only one click of add row.
What would be reason for occuring menuevents more than 2 times?
Can anyone help me?
thanks in advance.

hi kamil,
this function is called when click on Menu event.
when form is loaded.
// code when form is loaded from XML File.
Public Sub LoadForm1()
        Dim oXmlDoc As Xml.XmlDocument
        oXmlDoc = New Xml.XmlDocument
        Dim sPath As String
        Try
        sPath = IO.Directory.GetParent(Application.StartupPath).ToString & "\"
        oXmlDoc.Load(sPath & "NewInvoicePO.srf")
        Dim cp As SAPbouiCOM.FormCreationParams
        cp = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
            cp.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Fixed
            cp.FormType = "Invoice"
            cp.XmlData = oXmlDoc.InnerXml
            cp.UniqueID = "IndentPO"
            cp.ObjectType = "POHeader"
        oForm1 = SBO_Application.Forms.AddEx(cp)
        oForm1.Title = "Indent PO"
        oForm1.AutoManaged = True
        oForm1.SupportedModes = -1
            'oForm1.DataBrowser.BrowseBy = oForm1.Items.Item("33").Specific().value
            oForm1.Freeze(True)
            oForm1.EnableMenu("1281", True) '// Add Find Mode
            'oForm1.EnableMenu("1282", True) '// Add New Record
            oForm1.EnableMenu("1288", True) '// Next Record
            oForm1.EnableMenu("1289", True) '// Pevious Record
            oForm1.EnableMenu("1290", True) '// First Record
            oForm1.EnableMenu("1291", True) '// Last record
            oForm1.EnableMenu("1292", True) '// Add Row
            oForm1.EnableMenu("1293", True) '// Delete Row
            oForm1.EnableMenu("1294", True) '// Duplicate Row
        AddDataBindToMainForm()
        CreateMatrixForForm1()
        oDBDataSource4 = oForm1.DataSources.DBDataSources.Add("@INDENTPOMASTER")
        oDBDataSource5 = oForm1.DataSources.DBDataSources.Add("@INDENTPOCHILD")
            oForm1.DataBrowser.BrowseBy = "31"
        GetMaxPONo()
        oForm1.Freeze(False)
            oForm1.Visible = True
        Catch ex As Exception
            MsgBox(ex.Message)
        End Try
    End Sub
I write the following code in the item event when click on close button.
// code when click on close button
If pVal.FormUID = "IndentPO" And pVal.ItemUID = "2" And pVal.BeforeAction = True Then
                Try
                  oForm1.EnableMenu("1288", False) '// Next Record
                  oForm1.EnableMenu("1289", False) '// Pevious Record
                    oForm1.EnableMenu("1290", False) '// First Record
                    oForm1.EnableMenu("1291", False) '// Last record
                    oForm1.EnableMenu("1292", False) '// Add Row
                    oForm1.EnableMenu("1293", False) '// Delete Row
                    oForm1.EnableMenu("1294", False) '// Duplicate Row
                    Exit Sub
                Catch ex As Exception
                    'MsgBox(ex.Message)
                End Try
            End If
In the first line of the try block I got the error.
Error : object reference not set to an instance of an object.

Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

All,
Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue. What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
Many thanks,
Freek

Hi,
you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
I have never heard of the problem that entry lists are emptied after "insert"-event.
Kindes Regards,
Benni

How can i add rows in a tabular form

Hi,
How can i add rows in a tabular form with out updating in database and after adding the rows one by one and after filling the data then iwant to submit them all at once.Please help me on this.
Thanks

Hello Leandro,
In the Add_Rows page process, there is a box for "Number Of Rows". Change that value and you change the number of rows that get added. The default is 1.
Don.
You can reward this reply by marking it as either Helpful or Correct :)

Sharepoint 2010 - Visual studio 2010 error - Error occurred in deployment step 'Add Solution': Failed to load receiver assembly

Hello,
I get the following error when trying to attach an event reciver ->
Error occurred in deployment step 'Add Solution': Failed to load receiver assembly . The system cannot find the file specified.
This happens only when i try to change the deployment target from "GlobalAssemblyCache" to "WebApplication".
Steps to reproduce->
1. Create a new feature and add an event receiver. Deploy the solution. Everything works fine.(Since deployment target is GlobalAssemblyCache). If you now change the deployment target to "WebApplication" , it works too.
2. Now, restart visual studio. Change Deployment target to "WebApplication" without deploying the solution. And you get the above error.
3. Every time you restart your visual studio with deployment target as "WebApplication", you will receive this error.
Any idea?? Manual deployment of the solution works fine too.
When i go to virutal path bin directory, the dll is missing because of which the error occurs. Dont know why, it doesnt copy the dll to bin?
Thanks in advance,

Hi,
Feature receivers must be deployed in the GAC & cannot be deployed to private bin of the WebApplication.
Link: http://msdn.microsoft.com/en-us/library/ms469501.aspx
HTH !!!
AnjaliCH-MSFT

Error occurred in deployment step 'Add Solution': Failed to load receiver assembly

Guys,
I've created a VS2010 sharepoint project and added a feature event receiver to my site definition. When I try to deploy it show me the error bellow:
Error 1 Error occurred in deployment step 'Add Solution': Failed to load receiver assembly "SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483" for feature "SiteDefinitionProject2_Feature1" (ID: 9dce3ed9-5eb0-4bea-b42d-4dad84559a36).:
System.IO.FileNotFoundException: Could not load file or assembly 'SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483' or one of its dependencies. The system cannot find the file specified.
File name: 'SiteDefinitionProject2, Version=1.0.0.0, Culture=neutral, PublicKeyToken=a693a58979940483'
   at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.SharePoint.Administration.SPFeatureDefinition.get_ReceiverObject()
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
  0 0 SiteDefinitionProject2
9dce3ed9-5eb0-4bea-b42d-4dad84559a36
Someone can hepl!?
André Rentes

I also just encountered this error while trying to deploy my feature from Visual Studio 2010. I found the solution for my situation. Perhaps it may help others as well.
To see if your problem has the same cause as I encountered, open up the 14 hive and go to 14/template/features/<your-project-name_your-feature-name>. In this folder you will find a file Feature.xml. Open it up with notepad. On the second line
you will find the XML node Feature. Scroll to the right untill you see the XML attribute ReceiverClass. This
should show you a namespace, i.e. KoenZomers.MyProject.Branding.Features.Web.BrandingEventReceiver. In my situation it didn't show a namespace, but instead the following: $SharePoint.Type.<some-guid>.FullName$. If this is the same for
you, read on as this might be the solution to your problem. If it does already show a namespace, this probably won't help you.
This problem is caused because of a bug in Visual Studio 2010. It should replace the guid to match the guid found above the class declaration of your event receiver. For example:
[Guid("ff9717e0-05c4-4e7e-9349-3f31d3919b9c")]
public
class
BrandingEventReceiver
: SPFeatureReceiver
Probably because I recreated the event receiver class, it did generate a new Guid tag with a new Guid above my class declaration, but it did not update the feature file to reference this new guid. To do this manually, open up the folder on your development
machine where your Visual Studio project files reside. In it you will find a subfolder named Features. Open it. In that folder you fill find subfolders with the names of your features as given in Visual Studio. Open up the one containing the non functional
event receiver. In that folder you will find a file called <feature-name>.feature. Right click on it and choose Open with. Select to open it with notepad. On the second line you will find the XML node feature. Scroll to the right until you see the XML
attribute receiverClass in the same line. Make sure the value of this XML node is built up using the following syntax: $SharePoint.Type.<guid-from-event-receiver-class-declaration>.FullName$. So in the above example it would be $SharePoint.Type.ff9717e0-05c4-4e7e-9349-3f31d3919b9c.FullName$.
Save the file, close notepad. Close the solution in Visual Studio. Once closed, reopen the solution. Do a deploy of your solution. It should work this time. If you check the feature.xml file in the 14 hive now, it does display a namespace. This
made it work for me.

Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.

I have received the follwoing error when I depoly the custom masterpage with css, images, javascript files:
Error occurred in deployment step 'Add Solution': Failed to extract the cab file in the solution.
Any help will soon is appreciated.

Hi Bagalur,
Thanks for your sharing. It will help others who stuck will the same issue.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jerry Guo
TechNet Community Support

Missing functionality.Draw document wizard - delete/add rows and copy/paste

Scenario:
My customer is using 2007 SP0 PL47 and would like the ability to change the sequence of the rows of the draw document wizard and delete/add multiple rows (i.e. when you create an AR Invoice copied from several deliveries).
This customer requires the sequence of items on the AR invoice to be consistent with the sequence on the original sales order including text lines and subtotals. Currently we cannot achieve this when there are multiple deliveries.
Steps to reproduce scenario:
1.Create a Sales order with several items and use text lines, regular and subtotals.
2.Create more than one delivery based on the sales order and deliver in a different sequence than appears on the sales order.
3.Open an AR Invoice and u2018Copy fromu2019 > Deliveries. Choose multiple deliveries. Choose u2018Customizeu2019.
4.Look at the sequence of items on the Invoice. How can the items and subtotals and headings be moved around so they appear in the same sequence as on the sales order?
Current Behaviour:
In SAP B1 itu2019s not possible to delete or add more than one row at a time on the AR Invoice or Draw Document Wizard.
Itu2019s not possible to copy/paste a row on the AR Invoice or Draw Document Wizard.
Itu2019s not possible to change the sequence of the rows using the Draw Document Wizard.
Business Impact: This customer is currently spending a lot of time trying to organize the AR invoice into a presentable format. They have to go through the invoice and delete the inapplicable rows one by one (because SAP B1 does not have the ability to delete multiple lines at a time) and also has to manually delete re-add rows to make it follow the same sequence as the sales order.
Proposals:
Enable users to delete or add more than one row at a time on the AR Invoice or Draw Document Wizard.
Enable users to copy/paste rows on the AR Invoice or Draw Document Wizard.

Hi Rahul,
You said 'It is not at all concerned with Exchange rate during GRPO...' If that is the case how does the Use Row Exchange Rate from Base Document in the draw document wizard work? Does this mean 1 GRPO : 1 AP Invoice so I can use the base document rate?
How should I go about with transactions like these? That is adding an AP Invoice from multiple GRPO's having different exchange rates. What I am trying to capture here is that in the AP Invoice, base document rates should be used in the row item level and not the current rate when adding the invoice.
Thanks,
Michelle

How do I create an "Add Row" button (add instance with click activity)

I've been looking through a couple of examples, but the xml is lost on me. I need to learn how to do this for myself because it'd help me out on so many forms. There're forms I just simply cannot do without this function.
Where I get lost is the javascript linking the button to the specific table. I've been trying to use this I found in an example:
<event activity="click"><
script contentType="application/x-javascript">SAPS350a.Page1.TableData1.Table1.Row2.instanceManager.addInstance(1);</script></
event>
Now, I'm a complete newbie, so I'm sure someone can point out to me exactly what's wrong, but I dont know what "SAPS350a" means nor can I figure out where the label "TableData1" connects to.
If anyone can explain this in a "add rows for dummies" fashion, I'd be greatly appreciative.
See attached an example of one of the fields I need to repeat.

Hi Liz. You shouldn't really be playing in the xml. Especially if you are a newbie . You could corrupt the whole form if you do something wrong and you probably wont be able to rectify it. Scripts must be added in the script window. In your post, the 'SAPS350a.Page1...' is the path to the row of the particular form that you copied that code from. I have added a button to your form. have a look at the script to see what i have done.

Cannot add row without complete selection of batch/serial numbers while creating Goods receipt purchase order

Error:Cannot add row without complete selection of batch/serial numbers
       Dim oPDN As SAPbobsCOM.Documents
       oPDN = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes)
                     Dim serno As String = "SH-A1,SH-A2"
                    Dim sernoval As String() = serno.Split(",")
                    Dim mnfser As String = "SH-B1,SH-B2"
                    Dim mnfserval As String() = mnfser.Split(",")
                    For k = 0 To sernoval.Length - 1
                        oPDN.Lines.SerialNumbers.InternalSerialNumber = sernoval(k).Trim
                        oPDN.Lines.SerialNumbers.ManufacturerSerialNumber = mnfserval(k).Trim
                        oPDN.Lines.SerialNumbers.Quantity = linedetails(iRowNo).Quantity
                        oPDN.Lines.SerialNumbers.SetCurrentLine(k)
                        oPDN.Lines.SerialNumbers.Add()
                    Next
                oPDN.CardCode = "C232323"
                oPDN.Lines.ItemCode = "A00004"
                'oGR.Lines.LineNum = 0
                oPDN.Lines.BaseLine = 1
                oPDN.Lines.BaseEntry = 202
                'oGR.Lines.BaseRef = 203
                oPDN.Lines.BaseType = 20
                oPDN.Lines.Quantity = 1
                oPDN.Lines.UnitPrice = 2
                oPDN.Lines.WarehouseCode = '01'
             oPDN.Lines.Add()
             lRetCode = oPDN.Add

Hi Vasanth,
Invert the SetCurrentLine () and Add() at the end of the SSSerialNUmbers loop.
Regards,
Eric

How to use add row button of a tabuler form.

Hi all,
I have created a Tabuler form in my application.Could you please tell me 'How can i use the add row button of this form' as When i click the button "NOTHING HAPPENS".
Thanks
Regards,
Neha

Hi,
If you edit the button, the button name has to be 'ADD'. You can make the text / label whatever you like. On the form edit page, the button should appear with this text next to it: submit as "ADD".
HTH

Add row fails to duplicate formula

Similar Messages

Maybe you are looking for