Add specific approver to SC with a certain product group

Hi SRM workflow gurus!
we'd like to add a specific additional approver (one person) to a workflow if a certain product group (e.g. "job safety") has been selected in SRM shopping cart.
For example
1.
a. requestor wants to order sth.
b. goes to approver 1
2.
a. requestor wants to order sth. with this specific "job safety" product group
b. goes to approver 1
c. AND goes to specific approver 2 who is responsible for "job safety".
Where can we do this? In the start conditions or do we have to create a new workflow for this issue?
Does anybody have a glue about how to realize this?
Thanks a lot in advance.
Kind regards,
Henning

Hi Henning,
For this you need to create a Condition step in the workflow after the 1st approval. Do the follwoing:
1. Create a workflow in SWDD.
2. Add start condition that requestor wants to order sth
3. Add a send mail to 1st approver step.
4. Add a Condition task after 1st approval to check if the order sth. is with this specific "job safety" product group.
5. If yes, go to 2nd approver.
6. Else, terminate the workflow.
Simple!
For assistance on workflows please check if the following links help you:
http://****************/Tutorials/Workflow/Workflow.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/workflow%252bscenario
/people/sapna.modi/blog/2007/02/19/workflows-for-dummies--introductionpart-i
Hope this helps!
Regards,
Saumya

Similar Messages

Can I sync my phone with just certain contact groups?

We have two iphones that are linked to one apple id. i have had to turn off cloud contact syncing as it was syncing both phones with all contacts
Syncing with my mac allows syncing with specifc contact groups, is this possible with cloud syncing?

iCloud will not sync specific contact folders like iTunes. The only way to separate your contacts is to set up different iCloud accounts on both phones. If you want to do this, first decide which phone will be moving to the new account, then on the phone that will be moving, go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on the iPhone. After everything is turned off, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The other phone will not be effected by this.) Next, set up a new iCloud account on this phone using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account. At this point you will have two different iCloud accounts, one for each phone, with identical data on them.
You will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the unwanted data (such as deleting the other phone's contacts from your account, and vice versa). These changes will be reflected on each phone. When finished you will have individual iCloud accounts with just your own data on them.

How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

Hi All,
In CRM Web UI, there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under “Product” tab=> Product Group ID field.
Web UI Component Details -
UI component : TPMOE
View : TPMOE/ProductEOL
Context: PRODUCT Attribute : -PRODUCT_GRUOP
Click on Product Group ID field then below F4 Help screen appears.
In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
Current technical design for Product Group F4:
a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1” is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
Requirement :-
In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
System should query for products with all selected product group, transferred to product list tab.
Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
Can we enforce same behavior like DDIC search help in Web UI too Or suggest how we can achieve this requirement?
Thanks in advance
Regards,
Arjun

Hello All,
We have achieved this requirement by Custom development and approach followed as -
Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT
Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
e. Called F4 application for field product _group with help component usage created in step d.
Regards,
Arjun

Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use.

Hi,
When i am trying to deploy sharepoint 2010 application in VS 2010, i am getting the below error:
"Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use."
How to fix this?
Thank you

You can use:
$provider = Get-SPClaimProvider | where {$_.DisplayName -eq "Provider DisplayName"}
$mgr = Get-SPClaimProviderManager
$mgr.ClaimProviders.Remove($prov)
$mgr.Update()
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

having issues with contacts... groups specifically... when I add contacts to a group and check back there are fewer in group than when i started.. they disappear??

Hi
in this scenarion control is not going inside the condition
if (vo.getRowCount() == 0) and therefore VO is not getting initialized
why u are counting the row of VO to initialize the VO ,if possible pls remove this condition check ,problem will be solved .pls let me know in case of any issues.
thanx
Pratap

I want the max date but only look at rows with a certain category value.

I want a way to get the max date but only look at rows with a certain category value - ignoring the other rows. My detail table contains expenditures including date (col A) and category (col D) the number of rows will increase with expenditures over time. My summary table will have a cell for each category and display the last expense date for that category using a functionality that I must ask of you, dear community.
I am using the latest numbers on an iPad (4) with IOS6.
Secondarily, I would like to add another cell in the summery table with the value (col E) of the last expense for each category.
Thank you,
Warren

...later...
With the addition of an auxiliary column to the Main table, a second header row to the Most recent table, and a minor modification to the formula on the second table, the tables can handle a range of dates set by entering the first and last date into A1 abd B1 respectively of the summary table, Most recent.
Note that the selected range, shown with a green background in the auxiliary column, does not contain any category B expenses. Using LOOKUP, this would result in a repeat of the January 6 expense bering listed in this row. Switching to VLOOKUP, which can be set to require an exact match, allows the result shown—if there are no expenses in a given category, the formula returns "none" (or whatever message you substitute for "none" in the formula in that column).
Formulas:
Main::A2: =IF(OR(B<Most recent :: $A$1,B>Most recent :: $B$1),"x"&E,E)
Fill down to the end of column A.
This column must be located on the left side of the table (ie. must be column A), but may be hidden.
Most recent::A2: =IFERROR(VLOOKUP($D,Main :: $A:$D,COLUMN()+1,FALSE),"none")
"FALSE" will display as "Exact match" in Numbers's formula editor.
Fill down to the end of the table and right to column C.
Regards,
Barry

Approval of AR with out workflow

Hi frineds
We are using IM/PS. AR is created and follows the approval process.
Here we have no work flow. Now how the approval process can be followed.
I am aware that we can use the partner determination procedure but unable to go ahead.
As per the business process there are 4 appoval stages for each request. ( all the approval process is with the position, for each AR type. Example : General manger is the final approval postion, under this 10 general managere are there, whole will approve the AR with the AR type)
One more poin to add is in the partner function, if i use "S" for a postion, wher a group of person will be under a list for the ROLE for approval ............like 10 people under the "S" postion, i an unable to pick the ID in the AR. how can we group perople under the Group "Position"
Hope so i have put my question in a gud way
Regards
Surya

Thanks for the inputs
1. Your 2nd interpretation is on track.
A gropup of GM can approve , i mean any one of the group can approve.
How to group only these general managers? in the partner determination of the general data tab page, i want to select from the group only NOT FROM ID'S.
Regarding S:
I n the partner detmination function, there is a FUNCTION...NAME....No TPE..........
here in this we specify *type of partner number as 1. US-USER, 2. S-POSTION, 3. O-organisation unit and so on
if i give postion S, how to group all the GM usder one group
hope so i have put my question in a gud way
Thanks a lot
Regards
Surya

Add an approval to shopping cart whose status is awaiting approval SRM7.0

Hi All,
In one of my requirements i need to add an approver to a shopping cart which is on status awaiting approval programmatically in SRM7.0.
1. Is it possible to add an aprrover to shopping cart whose status is awaiting approval programmatically.
2. If yes, please guide me the steps or classes and methods are used to do this.
Thanks in Advance.
Best Regards,
Krishna

Hi Saravanan,
I am sorry for delayed response..
Requiremnet:
Need to add approvers manually to the shopping cart which is on awaiting approval status.
The code flow follows as below:
1. as the workflow already started for this shopping cart so we have interrupted the shopping cart with belwo method
          CALL METHOD /sapsrm/cl_wf_adv_facade=>interrupt_process
            EXPORTING
              iv_document_guid = lv_new_guid ( shopping cart guid)
2. instantiated the object for the class /sapsrn/cl_pdo_bo_sc_adv, to its constructor i have passed values work item id generated in above process.
3. added an approver manually to shopping cart using method of above said class /sapsrm/if_pdo_do_apv_ext~add_approver.
4. if i skip the execution of method /sapsrm/if_pdo_bo_sc~order, i am able see all the approvers added manually but the status is "In your Inbox"
5. if i execute the above said order method, all the approvers added manually are lost.
Question:
1. Please suggest me the sequence of methods called are correct?
2. As per my understanding complete workflow is restarting, so it is losing all the manual approvers if i am wrong suggest me, Is it not possible to have previously added manually added approvers even after ordering the cart?

Search for photos with a certain keyword ...

Hi,
I want to use the Filter-Pane to find all photos with a certain keyword on my disk - and not only in a specifiy folder.
Is this possible with Bridge?
Or do I always have to go into a specific subfolder and look there for the keywords? If yes, the filter doesn't help - if I am in the folder, I don't need the keywords anymore.
Thanks

use Edit->Find to search for keywords from different folders
http://help.adobe.com/en_US/Bridge/3.0/WS093EF261-B811-489c-8E30-10109DBE71FBa.html

How to add specific ports to OS X Lion firewall

I need to add specific ports/port ranges to the OS X Lion clients' firewalls, any ideas?
OS X Lion firewall settings only allow adding applications. There is no "LDAP" application, it's built into the Network preferences settings. The LDAP server is an OS X Lion Server running Open Directory.

iosw wrote:
I guess the flexibility in the regular Lion clients with ports is not possible. It's only possible with OS X Lion Server, fair enough.
No, you can configure both the client and server as much as you want. The only issue is that most people just don't understand what a firewall does (they think it is the same as anti-virus) so neither Apple nor I will bother explaining all the nitty-gritty details right off the bat.
The client version of Lion doesn't need to be providing any services at all. Hence, there is really no need to run the firewall. If you are doing something fancy that the application firewall doesn't quite support, then you might want to run the real ipfw firewall instead. It is also installed on the client, but isn't a tool for the great unwashed.
Personally, I find the fancy stuff pretty interesting, but I don't think you are doing that.
We're trying to configure SSL within the Lion clients and didn't know if there was an incoming requirement. There's a bug (logged even by Apple) when Lion client's attempt to bind to an SSL enabled Open Directory server. So the firewall preferences wasn't the reason for this failure. We're resorting to non-SSL binding until Apple fixes the problem, although we running on a private network and can get away with non-SSL for the time being.
You might want to ask about this in the Server forums. This could be a situation where Apple isn't going to bother explaining the details on how to fix it because it would just confuse most people and they may already have it fixed in-house. It has already been discussed and some people say they have fixes. See the details in this thread.

What harddrives are approved for use with ix4-200d?

Hi,
I found an article on the Lenovo site for the process of swapping out all 4 hard drives in an ix4-200d, but what I can't find is an article showing the list of approved/recommended hard drives for use with the ix4-200d. Can anyone point me to such an article?
My ix4-200d has a 4x500GB configuration (Seagate ST3500412AS drives). I'd like to swap them for either 2TB or 3TB drives, so I can have one place to store all my raw video, which right now is spread out over three different devices. Also, if you have any advice or gotchas to look out for when I swap out the drives, I'd love to hear you on that matter.
Thanks,
William

Hello vitorpereira
In regards to the ix4-200d and ix4-200d CE, Iomega/LenovoEMC never created an approved list of drives. When a disk failure occured the disk should be replacing with a matching drive if at all possible.
When it is not possible to use a matching disk model, a similar disk should be used. This would be a disk with the same manufacturer, capacity and rotation speed.
For the ix4-200d specifically, the units shipped with either a 500GB, 1TB, or 2TB Seagate Barracuda LP (5900rpm) Hepburn disks. ST3500412AS, ST31000520AS, ST32000542AS
That is what the ix4-200d units were qualified to use. Outside of those three specific drive models you will be dealing with hypothetically compatible disk options.
The recommendations that Wesley made previously are correct. You should go though the ix4-300d list find a model that is similar to the stock drive or at least within the capacity limits of the device model. (ix4--200d is 2TB disks, ix4-200dce is 3TB disks)
If a different disk models are used in either version of the ix4-200d, it is highly recommended that all disks be eventually replaced with the new model of disk for RAID stability. to do this, the Capacity Upgrade Guide should be followed.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Can you create a button that adds specific text to a form field?

Hi,
I was wondering if it was possible to create a button in a PDF that, when clicked, adds specific text to a form field?
I am trying to make a product catalogue where you click on a product button to add the product name or code to a form field.
Each product in the catalogue will have a button and the more you click the more is added to the form field(s).
Then when you have finished adding products to the form field(s) I want to be able to save and email the entire PDF as an order form.
Any thoughts would be appreciated!
Cheers,
Jim

Yes, it's possible. The most simple version of such a script will be something like this (used as the button's MouseUp event):
var v = this.getField("Products");
if (f.value!="")
f.value += ", ";
f.value += "Product1";

How can I install Firefox SILENTLY in a specific installation folder, -ms with which parameters ?

How can I install Firefox SILENTLY in a specific installation folder, -ms with which parameters ?
"Firefox.exe_path" -ms OPTIONS ??
Thanks.

'''Is there a way to download FF to a USB from another computer and install it from that USB on my PC? '''
You basically answered your own question. If you have access to another computer just go download the appropriate language and OS version of Firefox 5.0 from http://www.mozilla.com/en-US/firefox/all.html and put it on you usb drive and then go and install it onto you pc.

Is it possible to add an approver after submission of Requisition ?

Hi .....
I am new to iproc . I got one issue in the approval list .
Ex : Approval list (Requestor : XX22)
W123
Y123
X123 -- Pending
XX11 -- Approved
X123 -- Approved
XX22 -- Forward
XX22 -- Submitted
Here , my question is XX123 approver is coming again again .
Here the XX11 is not forwarded to XX123 . Without forwarding to other person is there any chance to add the approver in the list .
And if i want to analyse the approver list .... what is the approach ?(Is there any package ..)

Please go through the note How To Setup And Use AME For Purchase Requisition Approvals [ID 434143.1]
and under the section "Test Workbench" there are detailed steps on how to test the AME rule.
Thanks
Pradeep

Trying to Add Adobe Media Encoder in Creative cloud licenses but its not coming up, is media encoder bundled with another adobe product?

Trying to Add Adobe Media Encoder in Creative cloud licenses but its not coming up, is media encoder bundled with another adobe product?

You MUST have a 64bit computer... what is your computer?
Adobe's MINimums http://helpx.adobe.com/premiere-pro/system-requirements.html
-Programs won't display if they will not install on your computer
-http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

Add specific approver to SC with a certain product group

Similar Messages

Maybe you are looking for