ADDED event in loader.load and loader.loadBytes

Hi all,
I got this very strange behavior from FlashPlayer debugger 10.1 r82. When I call loader.load method, no ADDED event is dispatched to the loader object. But if I open the file and call loader.loadBytes instead, an ADDED event is dispatched to the loader object. I suspect the ADDED event is dispatched because the content is being set as the child of Loader object, but why in the other case it is not dispatched? Is this a bug?
Cheers
Sam

var obj:Loader = new Loader();
var url:URLRequest = new URLRequest("fixtures/loader_1.png");
obj.addEventListener(Event.ADDED, function(e:Event):void {
trace("added");
obj.load(url);
added was never printed, i know using anonymous functions as listener are
bad, i am just doing a test here. Funny enough, it was working for me
sometime and it works totally fine in Flash professional. It changed
sometime this week, I suspect is the new FlashPlayer debugger i installed
causing the problem, but i cannot be sure.
Thanks
Sam

Similar Messages

Discussion on load-balance and load-sharing

Hi, I found a article, which discuss the difference between load-balance and load-sharing. I think the explanation is pretty good, please see below. But I still have a question: how can we decide to choose one the both balance in the production environment ? Thank you
"In short, load balancing tries to distribute traffic evenly over multiple paths, whereas, load sharing intends to do it (for the lack of a better term) equally. True load balancing is difficult to achieve. For example, let's say there were two links (100 mbps and 300 mpbs) and a router needed to send out 600 mbps of traffic. Load balancing would distribute the traffic evenly, sending 300 mbps on each link. On the contrary, load sharing would divide the traffic equally based on the available resources, sending 200 mbps on the slower link and 400 mbps on the faster one. "

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
That's not how Cisco uses the terms, and generically they are often used almost interchangeably.
Cisco uses load balancing as the catch all for how a single L3 device routes across multiple paths to the same destination. Equal metrics or equal actual load distribution are not required. Most often, load balancing will be discussed with ECMP, but unequal path loading balancing will include Cisco's proprietary IGPs, such as EIGRP.
Cisco uses load sharing when using multiple paths when a single L3 devices doesn't normally route across multiple paths or multiple L3 devices are involved. Cisco load sharing discussions usually revolve around BGP.
Generically, I would say load balancing has more of a dynamic aspect to it, i.e. something is trying to actively balance traffic across multiple paths, while load sharing might mean multiple paths are utilized but not actively dynamically balanced.
I'm unsure what's your question with a production environment.

Names of the programs which Extend Materials, Load Materials and Load maste

Hi ,
Could you please give the names of the programs which Extend Materials, Load Materials and Load master data settings for auto replenishment.
With regards,
Pritee.

HI,
As per your needs programs list as follows.
1) Material Extended T-codes(program) :
   a) LSMW - Legacy System Migration Workbench
   b) BDC    - Batch data communication
   c) MM17 - Mass Maintenance Materials and
   d) MM01 - Create Material also extended material one by one.
2) Load Materials
   a) LSMW - Legacy System Migration Workbench
   b) BDC    - Batch data communication
3) Load Material Master
    a) MM01 - Create Material.
Hope, it is useful for you.
Regards,
K.Rajendran

Shipment completion check is erasing load start and load end dates & times

Once the load start, load end is clicked during the pack process, the system reads this just fine. Once ship complete happens, the system is erasing the load start load end.
We are capturing the difference between Load end and Load start as Packing time in a custom report. Similarly the difference between Shipment end and Shipment start as Loading time. But we post goods issue the delivery by ship complete button the dates and times are gone. Any idea of how and where I can configure this not to disappear even after the ship complete. Thank you.

Have you checked the table VTTK with different fields before completing PGI? In other words you are wiping out the loading start and loading end details some how. You should have a value in your VTTk value before PGI. Check that.
Regards,

MBP stuck at gray boot screen with apple logo, loading wheel, and loading bar

Today i was using my mac book pro and it was working just fine, and i shut it off and when i tried to use it later I get stuck at this screen. I have never seen this loading bar and it doesnt seem to do any thing because it only goes as far as it is in the picture then it dissapears leaving me stuck at the apple logo and the loading wheel.
Sadly i cant get my warranty information since i cant get past boot up, and the serial number in the battery area is to small to read (the letters or numbers are literaly blobs)
I have tried holding shift at boot and it does nothing and holding alt during boot only shows the hard drive icon, but when i click it im back to stage 1.

Spaghettipopsicle wrote:
Today i was using my mac book pro and it was working just fine, and i shut it off and when i tried to use it later I get stuck at this screen.
Your Mac is attempting to fix your drive and it's not succeeding, you can let it go for some time and see if it clears up.
https://support.apple.com/kb/TS3148
Do these steps.
If on 10.6 stick a clean and polished 10.6 disk into the computer and reboot holding the c key down.
If on 10.7 hold the command and r keys and boot, you'll enter Lion Recovery Partition.
Under the Utilities Menu is Disk Utility, use it to Repair Disk (note any failures!) and Repair Permissions (ignore list)
See if your computer boots, if not repeat the above steps and use Disk Utility to format a blank external drive, Partiiton Tab, Option: GUID, format OS X extended (J) and click apply.
Next quit and install 10.6/10.7 onto the external drive, when that completes, hold the option key down and you can boot from it. Retrieve your files off the internal drive to the external.
If you cant' see your internal drive in Disk Utility, it's likely failed.
Sometimes you can software like Data Rescue, installed on another Mac or a external boot drive and "read" the failed drive for any salvagable data, provided it's still working mechnically. Good thing about DataResue supposedly is you don't pay unless it's sure it can recover some of your files. I never used it as I make many backups, or bootable clones.
Mechanically failed drives data can only be recovered by platter dissection, a very expensve process.
There is several ways to read the drive, take it out and place it in a enclosure or use a IDE/SATA to USB adapter cable with another Mac or PC (with MacDrive) or use another Mac and Firewire Target Disk Mode (hold T on the sick Mac)
https://support.apple.com/kb/ht1661
If the drive works and you got your data off of it, you can erase it (use the Zero option, GUID/OS X Ext.J) and reinstall OS X, same user name as before, update, (Repair Disk from disk if on 10.6.8) install programs and return files last (and in that order exactly) your machine will be as close as possible to the way it was.
Lastly, consider making a clone, this way you can simply option boot and use that.
http://www.bombich.com/
If the above is too much for you, please let a local Mac/Pc specialist assist you to prevent data loss.

Using load movie and load variable

Ok i am having a problem with my movie... when i test it
using test movie it is fine but when i preview in HTML or run the
SWF on it own i am having a problem... and i spotted the items i am
having a problem with but problem is i dont know why.
i am loading a movie dynamically in my main movie using load
movie
loadMovie("menu.swf",_root.i_dress2.i_content);
and in the actual movie menu.SWF i am loading a text
dynamically using loadvariable... but i am actually loading it into
the movie that has already been loaded into my main movie... maybe
it i will make sense when you see my line of script that is in the
menu.sef movie....
loadVariables("menu.txt",_root.i_dress2.i_content.arg.maskedText.scrollpage);
so i guess it is like i am loadingthe txt into the text file
after it is loaded into the main movei so that is why it is
referring ot the text field that way...
anyway it works fine when i go thorugh test movie but when i
preview in HTML the text doenst come out...
am i doing this thewrong way.? is there something i am
missing?
Thanks...any help will be appreciated!!

You may be hitting a Flash 8 security issue that you cannot
load external
data using file:////path_to_your_movie/youmoviehtml in a web
browser. You
may need to use
http://thedomain.com/yourmovie.html.
Lon Hosford
www.lonhosford.com
May many happy bits flow your way!
"batgirl_Sa" <[email protected]> wrote in
message
news:e2v04c$lq$[email protected]..
Ok i am having a problem with my movie... when i test it
using test movie
it
is fine but when i preview in HTML or run the SWF on it own i
am having a
problem... and i spotted the items i am having a problem with
but problem is
i
dont know why.
i am loading a movie dynamically in my main movie using load
movie
loadMovie("menu.swf",_root.i_dress2.i_content);
and in the actual movie menu.SWF i am loading a text
dynamically using
loadvariable... but i am actually loading it into the movie
that has already
been loaded into my main movie... maybe it i will make sense
when you see my
line of script that is in the menu.sef movie....
loadVariables("menu.txt",_root.i_dress2.i_content.arg.maskedText.scrollpage);
so i guess it is like i am loadingthe txt into the text file after
it isloaded into the main movei so that is why it is referring ot
the text fieldthat way... anyway it works fine when i go thorugh
test movie but when i preview inHTMLthe text doenst come out... am
i doing this thewrong way.? is there something i am missing?
Thanks...any help will be appreciated!!

After IOS Update 8.1.1. What the heck can I do ?The touch screen is crazy,the websites in search aren't displayingnproperly literally every page or site I go to is messed,and the pages aren't loading correctly and load when I don't want them to just ,

iit's messed and this is disgusting,Send me help for my old IPad 2 ,after IOS 8.1.1. Update I need hands on help and no I'm not under warranty. I can't search properly,websites not displaying properly,none of them and touch screen terribly touchy and it is maddening.

Hi Dee12124,
Welcome to Apple Support Communities.
I am going to get you to do a soft reset that, I will hope fix some of your issues.
To do this:
1. Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons until the iPhone shuts off and begins to restart. This will take anywhere from 10-20 seconds.
3. When you see the Apple Logo, you can let go of the buttons.
If this still doesn't fix your device, what we could do is try resetting the whole device, wiping it. If this is the case, get back to me and I will pose the steps below. I would recommend that you do this AFTER the device is backedup however.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.

Dump and Load Settings error -

Using outlooksoft 5.
I've got an SSIS package that has a dump and load task.
I am getting an error when the task tries to execute.
It looks like it is happening during the cleanup process of the load task since the output looks like this:
Cleanup phase is beginning.
Task failed: <name of dump load task>
Is there something I can look at to determine where exactly the dump and load is failing?
I have placed breakpoints around all the events in the dump and load task...but it is never clear as to what is happening.
I am also getting a lot of 0 byte TMP files that are getting written to the source directory.
Any help would be great.
Thanks

Maybe the error is already in the transformation or conversion files. What happens if you validate your transformation file ith the datafile you are trying to load? Do you get any error in this case when you have the validaterecords option set to yes? Or do you get a correct set of lines in the output file option with the correct dimension structure and the correct dimension members in the rows?
Does it only happens when you choose "Replace and clear" or also if you use the "Merge data values" option?
Regards,
Joost
Edited by: Joost Hoppenbrouwers on Apr 1, 2008 4:47 PM

OS X Tiger Loading Problem and Monitor Question

Ok guys, I have two questions for you Mac Experts.
1. Yesterday, I was trying to load OS X Tiger, from CD onto my 400mhz Rev.2 Power Mac and I tried it about 5-9 times, and it kept giving me an error message saying that installation failed, or "Hold the power button, and hit reset". I took the hard drive out, put it in my slot loader iMac, and loaded up tiger onto that just fine, with no problems. So, it's not the CD's or the hard drive. The funny thing is that when i put the hard drive back into my power mac, it runs just fine. No problems. Do you think it is the CD Drive or what? Maybe a Logic Board Problem?
2. I just picked up a Flat Screen iMac 1st gen. I was wondering if there was a cable that I could use to connect the iMac to my Power Mac and use the iMac as a screen for my Power Mac. The guy at the electronics store showed me some mac adaptor that would fit into my iMac, and that had a serial port at the end. Could i connect that serial end, into the serial port of my Power Mac and have it read as a monitor? If this is possible, that would be great. If not, i will stop being a cheap skate, and buckle down and purchase a flat screen monitor. Any help would be great.

Ok, let me see if this helps any.
I downloaded Dimm Memory check thing that you said, it it shows that all of my RAM is ok. All of my RAM is either pc 100 or pc 133, so no issues there.
I downloaded the most up to date firmware, and i said that my firmware is up to date. Dont know if loading it made it up to date, or if it already was.
The video card is the origial Rage 128 or something. Whatever came with the Power Mac, is in there.
I was just downloading updateds in tiger, and got that stupid error message to hold the power, and restart. I am going to try this machine now in tiger, and get back to you.
Also thanks for the link about the iMac Flat Screen. I will look into it.

Why is my evb3 not working. its showing up and loading patches but no output?

hi folks my evb3 organ is not working. it loads up and loads patches but no sound is output??? all my other instruments are working tho ?? any ideas please dudes??

The evb3 is multi tembral. Set the instrument channel to 1,2, or 3 for the upper, lower or pedals.

Macbook Pro keeps freezing and loading?

For two days now, my Macbook Pro is running slower than usual and it keeps freezing during FaceTime, Skype, and other applications. It randomly force quits my messages and now it freezes often when I use browsers. Every 5-7 minutes, I would click on something and it would show the loading wheel and load for a bit. My laptop is running really slow and I was wondering if there was anyway I could fix it easily.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Load-balancing vs Load-sharing (L2/L3)

What is the difference in load balancing and load sharing. Can you generalize load-balancing to layer two? Or layer three protocols also do this, except BGP?
FHRPs like VRRP, GLBP, and HSRP are essentially load sharing protocols (except GLBP though). Loop prevention mechanisms like MSTP, G.8032, and REP also do not do load balancing I guess. Instead they offer a way to distribute (share) traffic over multiple links unevenly. Why do people still call it load-balancing?
While link aggregation may truly be considered load balancing. Where traffic can be balanced based on a few attributes ( src-dst/mac, ip, port).
And what role does fast-switching/process-switching play in load balancing. I am aware that these are the very processes that ultimately do load-balancing, given enough equal cost paths. Does CEF really take load balancing to another level? It still does the same job, but by caching flow data (RIB) to the CEF table, doesn't it?
Incase of IGP, load-balancing may be possible, but BGP just doesn't support it. Because it only selects one best route (?). Even with multipath, BGP advertises best path only; it does install multiple routes in routing table though. So IGP does the balancing?

What is the difference in load balancing and load sharing. Can you generalize load-balancing to layer two? Or layer three protocols also do this, except BGP?
FHRPs like VRRP, GLBP, and HSRP are essentially load sharing protocols (except GLBP though). Loop prevention mechanisms like MSTP, G.8032, and REP also do not do load balancing I guess. Instead they offer a way to distribute (share) traffic over multiple links unevenly. Why do people still call it load-balancing?
While link aggregation may truly be considered load balancing. Where traffic can be balanced based on a few attributes ( src-dst/mac, ip, port).
And what role does fast-switching/process-switching play in load balancing. I am aware that these are the very processes that ultimately do load-balancing, given enough equal cost paths. Does CEF really take load balancing to another level? It still does the same job, but by caching flow data (RIB) to the CEF table, doesn't it?
Incase of IGP, load-balancing may be possible, but BGP just doesn't support it. Because it only selects one best route (?). Even with multipath, BGP advertises best path only; it does install multiple routes in routing table though. So IGP does the balancing?

As3IsoLib: Loading Image and Adding to Sprite.

I'm using a library called 'As3IsoLib' in my isometric game to create sprites and other elements. Currently I add a sprite and load an image to be displayed for the sprite. Up until now I have not checked to see when the image has actually loaded as I just straight away add it. That's got me thus far but now I'm expericening 'security' errors in flash which apparently mean it's trying to add an image which hasn't yet fully loaded.
Since I was going to be loading lots of images I put such under a function entitled 'LoadImg'. This is passed a string that is the location of the image we wish to load.
var UnitSprite:IsoSprite;
UnitSprite.moveTo(0, 0, 0);
UnitSprite.sprites=[LoadImg('imgs/picture.png')];
DrawSprite(UnitSprite);
function LoadImg(Img:String):Loader
     var myLoader:Loader;
     myLoader=new Loader();
     myLoader.load(new URLRequest(Img));
     return myLoader;
But now I need to say when it's completed loading the image then return the loader which isn't possible. I can't add an event handler saying when the 'myLoader' has completed because then you have to supply a second function rendering me unable to use return. I also cannot pass it the sprite I wish to add the image to. I've read in AS2 you were able to pass additional arguments. Such would solve my problem via something along the lines of...
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, AddImg(SpriteToAddImgTo));
function AddImg(e:Event,Spr:IsoSprite)
    Spr.sprites = [e.target];
But I'm using AS3 so I cannot do such. I've read several times on the Internet that it is possible to pass addional arguments ( see http://sinfinity.pl/blog/2012/03/28/adding-parameters-to-event-listener-in-flex-air-as3/ )
but I cannot get it to work. How might I achieve this?

that may (or may not) be caused by trying to use the loader's content before loading is complete. to remedy the problem, if it's caused by trying to use the loader's content before loading is complete use:
var UnitSprite:IsoSprite;
UnitSprite.moveTo(0, 0, 0);
     var myLoader:Loader;
LoadImg('imgs/picture.png');
function LoadImg(Img:String):void
myLoader=new Loader();
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, AddImg);
myLoader.load(new URLRequest(Img));
function AddImg(e:Event)
Spr.sprites = [e.target];
UnitSprite.sprites=Bitmap(myLoader.content);
DrawSprite(UnitSprite); }

Extraction and loading of Training and Event Management data (0HR_PE_1)

hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRB

Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi.

Accordion load event does not fire when accordion and load event created dynamically using actionsript

I cannot get the accordion load event to fire when I have
created the accordion and load event using actionscript . Here is
some sample code:
createClassObject(mx.containers.Accordion, "acc",
getNextHighestDepth());
acc.createSegment(mx.containers.ScrollPane, "sc1", "Number
One");
acc.createSegment(mx.containers.ScrollPane, "sc2", "Number
Two");
var accLis=new Object();
accLis.load=function(evtObj) {
trace("load");
accLis.change=function(evtObj) {
trace("change");
acc.addEventListener("load", accLis);
acc.addEventListener("change", accLis);
I made sure to add the ScrollPane and Accordion components
to my library. So the load event does not fire, but the change
event does fire. And through further testing the other events do
not fire, including the draw event. Can anyone help? The only time
I can get the load event to fire on an accordion is if I put an
accordion on stage, select it and add the actionscript to the
objects actions like shown below:
on(load) {
trace("load");
on(draw) {
trace("draw");
Can somebody help? Unfortunately I must create all my
components dynamically. Thank you in advance.

I'm having this issue also...but only apparently with Internet Explorer and only on some machines...ideas?

ADDED event in loader.load and loader.loadBytes

Similar Messages

Maybe you are looking for