Adding a BSEG field to the FB03 dynamic selection screen

Hello,
We have a requirement wherein we want to add a field from BSEG in the dynamic selection screen of FB03.
We found that the logical database behind this is BRF.  So we created a u2018CUSu2019 selection view for the logical database and added the field from BSEG to the functional group
and checked the checkbox u201CPreselectu201D for it to appear automatically in the FB03 screen.
But we still couldnu2019t see the field in FB03 dynamic selection.
On analysis, we found that only tables are that are defined in the nodes (Extras  Selection views) can be used to create the dynamic selection and BSEG was not available
as one of the node.  So we added BSEG as one of the node by adding the below code to the SELECTION of the logical database.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSEG.
Even after that, we couldnu2019t see the field from BSEG in the dynamic selection.
Are we missing anything here?
I see many threads here on similar lines but no one has posted the exact step. Any help is highly appreciated.
Thanks a lot.
Regards,
Suganya

Hi
If you want to take the line item details than you can refer these t-codes rather than customizing.
S_AC0_52000887 - Receivables: Profit Center
S_AC0_52000888 - Payables: Profit Center
S_ALR_87012332 - G/L Account Statements
Here by using the dynamic selection you can get the results. Use object list display and select the layout for more fields.
Thanks

Similar Messages

  • FAGLB03 Report.-Adding an extra field under the Free/Dynamic Selection

    Hi ,
    I have got a requirement to add field named 'XREF3' (BSEG) under the Free Selection in FAGLB03 Report.  I did a research but could not find any exits . Can this requirement be met by configuration Or any other Solution?

    Hi,
    Below links may bay helpful
    http://forums.sdn.sap.com/thread.jspa?threadID=2038688
    http://forums.sdn.sap.com/thread.jspa?threadID=2082493
    Regards
    Aromal R

  • Add new field in the fbl5n dynamic selections/ Need to add dunning clerk fi

    Hi Gurus,
    Currently, you can find the Accounting Clerk field in the dynamic selections.  Would like to be able to use the Dunning Clerk field in the dynamic selections.
    Beyond that, would like to bring both Accounting Clerk and Dunning Clerk as columns when looking at customer detail. 
    Would be willing to use other report that I can access that would give me these two clerks by customer number.
    Thanks in advance.....
    Ramanjaneyulu

    Hi,
    the field dunning clerk is not available in Dynamic Selections because it is in table KNB5.
    The fields which are eligible for dynamic selection can be reviewed for
    the related logical database via trans SE36
    1) Enter logical database DDF, KDF or SDF (for FBL5N, FBL1N, FLB3N)
    2) Menu -> Extras -> selection views
    3) Here you can find 2 origins of the view (SAP and CUS).
       The standard view SAP is used. Create your own using view CUS. First
       copy the view SAP.
       On the left side are the functional groups.
       01  Customer master  => fields from table KNA1
       02  Company code    =>  fields from table KNB1
       03  Documents        => fields from table BSID
      Only those fields from these tables can be used for dynamic selection
    Regards,
    Greta

  • Adding one more field to the Base line price screen (MEk3)?

    Hi,
    Now we are entering the base line price for each material.
    My requirement is
    1) Ability to enter in baseline prices by part by supplier.
    If no supplier is entered then the baseline value applies to all suppliers. If a price needs to be recorded specific to a supplier, then the supplier code must be entered. Thus, a part may have two entries (one for all suppliers, and one or more for each unique supplier that needs to be recorded).
    How to proceed for this requirement..how to start ...please help me..is this config change or code change..or it is related to custom or standrard change?
    please help..

    Hello,
    You can define access sequence (SPRO->Materials Management->Purchasing->Conditions->Define Price Determination Process) for the condition type to look at Vendor/Material level and Material level in the sequence. Please make the access Exclusive so that no further search is carried out once  a condition record for Vendor/Material level is found.
    Thanks,
    Venu

  • Add certain field at dynamic selection screen in FBL3N transaction

    Hello Expert,
    I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
    So, I went to SE36 transaction and changed something in selection view for SDF.
    However, it didn't work.
    Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
    Thanks in advance.
    BR,
    Chris Kim

    Hi
    Refer to the following thread
    Additional field selections in FB03
    It talks about adding Header Text field
    You should be able to add entry date similarly
    Regards
    Sach!n

  • Passing values to a dynamic selection screen via a report

    Hi,
    I have the following problem and need to seek your expertise urgently.
    In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
    Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
    Appreciate any help given.
    Thanks,
    CK

    Hello CK,
    Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

  • CProjects - Adding a new field to the detail screen of object link

    Hi All,
    I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
    Please let me know how could i realise this functionality?
    Thanks in advance.

    Hi Srini,
    Thanks for your Reply
    I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
    But still that field is not visible in the dynamic selection screen.
    Thanks
    Ajay.D

  • Adding a new field to the selection screen of a LDB

    Hi all,
    I want to add a new field Clearing date(BSEG-AUGDT) in the dynamic selection screen of  the report RFUMSV00.
    For adding a new field i have copied the SAP view of a Logical database to CUS view.
    Next i had added the Clearing date(BSEG-AUGDT) to the function group Document header(01) and selected the check box Preselect and saved the view.
    But still i am not able to find the newly added field in the dynamic selection screen of the report.
    Please suggest me where i am going wrong or how to do this.
    Thanks in advance
    Ajay

    Hi Srini,
    Thanks for your Reply
    I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
    But still that field is not visible in the dynamic selection screen.
    Thanks
    Ajay.D

  • How to add a new Field in the Dynamic Selection screen section.

    HI,
    There is a requirement in which I need to add a field in existing program of dynamic selections.
    I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
    which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
    I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
    on the screen.
    LDB used is the Customer Database.
    I have added GET KNKK statement after GET KNA1 statement.
    Can any one help me how we can make this rating field appear in the selection screen.
    With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
    Regards
    Prashant Prabhu

    Hi,
    So you need that this new field have data in old records?
    1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
    2.- If condition "1" is not yours.
    First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
    Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
    To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
    Hope it helps. Regards, Federico

  • Adding a new field to the search help exit

    Hi friends,
    adding a new field to the search help exit. How does it work ?
    Thanks in advace
    Ilhan

    The search help exit allows you to modify functionality of search help. If you add a new field to the
    parameter list that is not contained on the selection method you can manually populate it within the search
    help exit.
    This  would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
    data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
    Therefore you need to read table SHLP in-order to locate position of value within string.
    Example:
    To find position of personnel number (PERNR) within elemenory search
    help M_PREMN you would use the following code:
    Loop at record_tab.
         read table shlp-fielddescr into wa_shlp
                                       with key tabname   = 'M_PREMN'
                                                fieldname = 'PERNR'.
    You could then use this information in the following way, for
    example, to find a persons organisation unit:
          select  orgeh endda
            up to 1 rows
            from pa0001
            into (ld_orgeh,ld_endda)
           where pernr eq record_tab-string+wa_shlp-offset(8)
                                                      u201Cpernr length is 8
           order by endda descending.
          endselect.
          select single orgtx
            from t527x
            into ld_orgtxt
           where orgeh eq ld_orgeh and
                 sprsl eq sy-langu and
               ( endda ge sy-datum and
                 begda le sy-datum ).
    If you have added a new field to the end of the parameters list
    the next step is to populate it by adding this data to the end of
    the record_tab string:
      concatenate record_tab-string ld_orgtxt into record_tab-string.
      modify record_tab.
    endloop.

  • Adding a new field to the Address Data for a business partner

    Hi Experts,
    I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
    Regards
    Yusuf

    The search help exit allows you to modify functionality of search help. If you add a new field to the
    parameter list that is not contained on the selection method you can manually populate it within the search
    help exit.
    This  would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
    data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
    Therefore you need to read table SHLP in-order to locate position of value within string.
    Example:
    To find position of personnel number (PERNR) within elemenory search
    help M_PREMN you would use the following code:
    Loop at record_tab.
         read table shlp-fielddescr into wa_shlp
                                       with key tabname   = 'M_PREMN'
                                                fieldname = 'PERNR'.
    You could then use this information in the following way, for
    example, to find a persons organisation unit:
          select  orgeh endda
            up to 1 rows
            from pa0001
            into (ld_orgeh,ld_endda)
           where pernr eq record_tab-string+wa_shlp-offset(8)
                                                      u201Cpernr length is 8
           order by endda descending.
          endselect.
          select single orgtx
            from t527x
            into ld_orgtxt
           where orgeh eq ld_orgeh and
                 sprsl eq sy-langu and
               ( endda ge sy-datum and
                 begda le sy-datum ).
    If you have added a new field to the end of the parameters list
    the next step is to populate it by adding this data to the end of
    the record_tab string:
      concatenate record_tab-string ld_orgtxt into record_tab-string.
      modify record_tab.
    endloop.

  • Dynamic selection screen fetching the value from table fields

    hi gurus,
    i have one table say ztable...and i should create a dynamic selection screen which should populate the selection screen by the table field names.
    example..if i have 3 fields im my table..my selection screen should have three selection option fields..and in future if i add one more field in my table it should automatically create another slection-option in selection screen..
    thanks
    Sudheer

    Do you mean like SE16 works. If so, you should notice that if you  amend the selection fields, the screen program is actually re-generated.
    That is what is happening. A program is being created and re-generated.
    To create a dynamic selection screen in a single program is not possible ( I may be wrong ). If it is possible, then you would have problems in defining selection screen field names and using them.

  • Exclude one field from Logical Database's dynamic selection screen

    Hi Guru,
    I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
    I have use the below syntax in my zprogram.
      selection-screen exclude select-options: doc-no.
    However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
    Please advice.
    Best Regards,
    Fung

    The selection part of the logical database defines input fields for selecting data.
              The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
              Include called DB<ldbname>SEL.
            SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                    SELECTION-SCREEN EXCLUDE ... .
                                                    SELECTION-SCREEN END OF VERSION ver.
    Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
              SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
    If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

  • Need to disable one of the select-options in dynamic selection screen

    Hi,
    we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
    Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
    Thanks,
    Ravi

    Hi,
    Get inside your selection screen, by executing your program.
    Now type /h in the field where you enter transaction code and press enter.
    Now again press enter, this will take you debugger starting from your Selection screen.
    You might be knowing this, still if you are not aware of this, this might be a valuable tip.
    From here , you can trace your Parameter name.

  • Adding new table dynamic selection screen of transaction FBL5N (LDB DDF).

    Hi,
    I have a requirement to add SEGMENT (CEPC-SEGMENT) field on the dynamic selection screen of transaction FBL5N (LDB DDF).
    Please let me know how can I meet this requirement
    Thanks

    I did not find any screen exits for this Tcode, may be you need to use enhancement spots.

Maybe you are looking for