Adding field dynamically on screen.

Hi All,
I have to add fields dynamically on screen based on the no. of data records.
Is there any way to add field dynamically.
I need field like this:
first a check box second not editable field third editable field.
Table control is another way to solve the problem but only constraint about check box.
Please help me find out any solution.
Thanks in advance.
Piyush Mathur

write your code as :
AT SELECTION-SCREEN OUTPUT.
for making data set 2# inactive
IF rdt1 = c_x.
    LOOP AT SCREEN.
      IF screen-name EQ 'S_BELNR-LOW' OR
         screen-name EQ 'S_BELNR-HIGH' OR
         screen-name EQ 'P_GJAHR'.
        screen-input ='0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
for making data set 1# inactive
IF rdt2 = c_x.
    LOOP AT SCREEN.
      IF screen-name EQ 'S_BUDAT-LOW'
         OR screen-name EQ 'S_BUDAT-HIGH'
         OR screen-name EQ 'S_KUNNR-LOW'
         OR screen-name EQ 'S_KUNNR-HIGH'
         OR screen-name EQ 'RDS1'
         OR screen-name EQ 'RDS2'.
        screen-input ='0'.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF.
END-OF-SELECTION.

Similar Messages

Adding fields on selection screen dynamically

Hi all,
Can we add some fields to selection screen dynamically on pushbutton click?
Regards,
Dnyanesh

just have look below code
REPORT zrsdvsr1
       LINE-SIZE 220
       LINE-COUNT 65(5).
TYPE-POOLS : slis.
TABLES
TABLES: vbak.
DATA DECLARATIONS
Ranges
RANGES: r_posnr FOR vbap-posnr.
DATA: BEGIN OF t_veramt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
      END OF t_veramt.
DATA: BEGIN OF t_disamt OCCURS 0,
        vbeln TYPE vbap-vbeln,
        posnr TYPE vbap-posnr,
        matnr TYPE vbap-matnr,
        netwr TYPE vbap-netwr,
        mwsbp TYPE vbap-mwsbp,
        netwr_v TYPE vbap-netwr,
        mwsbp_v TYPE vbap-mwsbp,
        disc_val TYPE vbap-mwsbp,
      END OF t_disamt.
*&   ALV FIELDS
DATA : alv_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       alv_layout TYPE slis_layout_alv.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_ver RADIOBUTTON GROUP g1 USER-COMMAND rad DEFAULT 'X',
             p_sab RADIOBUTTON GROUP g1 .
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln NO INTERVALS MODIF ID gr1.
PARAMETERS:    p_dwfile TYPE rlgrap-filename
               DEFAULT 'C:\test1.txt' MODIF ID gr2,         "#EC NOTEXT
               p_upfile TYPE rlgrap-filename
               DEFAULT 'C:\test.txt' MODIF ID gr3.          "#EC NOTEXT
SELECTION-SCREEN END OF BLOCK b2.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_upfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_upfile.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_dwfile.
**************F4 Help For Input File Name****************************
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            program_name = syst-cprog
            dynpro_number = syst-dynnr
            field_name    = 'C:\'
       IMPORTING
            file_name     = p_dwfile.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_sab = 'X'.
      IF screen-group1 = 'GR1' OR screen-group1 = 'GR2'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ELSE.
      IF screen-group1 = 'GR3'.
        screen-active = '0'.
        screen-invisible = '1'.
      ELSE.
        screen-active = '1'.
        screen-invisible = '0'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
START-OF-SELECTION
START-OF-SELECTION.
Check Radio Button
IF p_ver = 'X'.
    PERFORM get_details_open_so_vertex.
ELSE.
    PERFORM get_details_open_so.
ENDIF.
Display the output.
PERFORM diplay_report .
regards
vinod

Adding field in pa30 screen urgent

hi all,
i am new to user exits.
and my requirement is to add a field in screen for PA30 tcode screen.
so how i can go for this .
if anyone has added fields in any SAP standard screen
then plz give me the doc regd that with screen shots if u have otherwise give me the steps.
my mail id is- [email protected]
plz i am looking urgently for it.
i will award all ur efforts.
thanks
sanjeev

Screen Exit
Please remove the TDS-related input fields on the PO entry screen on the customer data tab (PO line details).
- TDS account
- TDS cost code
- TDS sub code
1.     Goto Transaction Code Me21n
Fill the following fields
Enter
Give the input values in following fields from ORGDATA TAB
Purchasing org
Purchasing group
Company code
Vendor
Enter
Select Customer Data tab like following
USER EXIT : MM06E005 (Customer fields in purchasing document )
 Goto : T.Code : SMOD
     Give the Enhacement Name : MM06E005
     Click on Display
     Click on Components Push Button
     Double click on function module EXIT_SAPMM06E_016( Export Data to Customer Subscreen for Purchasing document item)
     Double click on Include ZXM06O01.
     Insert the following coding in that include
SET PARAMETER ID 'BUK' FIELD g_ekko-bukrs.
LOOP AT SCREEN.
    IF screen-name = 'EKPO_CI-ISMSUBTITLE1'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>>>>>> Begin of insert CR336/BG1 >>>>>>>>>>>>>>>>>>>>>>
    IF screen-name = 'G_EAN11'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*<<<<<<<<<<<<<<<<<<<<<<< End of insert CR336/BG1 <<<<<<<<<<<<<<<<<<<<<<<
*>>>>>>>>>>>>>>>>>> Begin of Changes for K896570/501411945 <<<<<<<<<<<<<
IF screen-name = 'EKPO_CI-TDSACCOUNT'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
IF screen-name = 'EKPO_CI-TDSCOST'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
IF screen-name = 'EKPO_CI-TDSSUB'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>> End of Changes for K896570/501411945 <<<<<<<<<<<<<
*>>>>>>>>>>>>>>>>>>>>>> Begin of insert SM1 >>>>>>>>>>>>>>>>>>>>>>
    IF ( screen-name = 'EKPO_CI-TDSACCOUNT'
      OR screen-name = 'EKPO_CI-TDSCOST'
      OR screen-name = 'EKPO_CI-TDSSUB'
      OR screen-name = 'TDS_TXT_1'
      OR screen-name = 'TDS_TXT_2'
      OR screen-name = 'TDS_TXT_3'
      OR screen-name = 'TDSACCOUNT-DESC'
      OR screen-name = 'TDSCOST-DESC'
      OR screen-name = 'TDSSUB-DESC' ).
      IF g_ekko-bukrs(2) <> 'U6'.       "not a theatrical company
        screen-invisible = '1'.
        screen-input     = '0'.
      ELSEIF g_flag = 0.                "display only
        screen-invisible = '0'.
        screen-input     = '0'.
      ELSEIF g_flag = 1.                "change
        screen-invisible = '0'.
*>>>>>>>>>>>>>>>>>> Begin of Changes for K896570/501411945 <<<<<<<<<<<<<
       screen-input     = '1'.       "Fharook Syed
        screen-input     = '0'.        "Fharook Syed
*>>>>>>>>>>>>>>>>>> End of Changes for K896570/501411945 <<<<<<<<<<<<<
      ENDIF.
      IF screen-name = 'EKPO_CI-TDSACCOUNT'.
        screen-required = '1'.
      ENDIF.
      MODIFY SCREEN.
    ENDIF.
*>>>>>>>>>>>>>>>>>>>>>> End of insert SM1 >>>>>>>>>>>>>>>>>>>>>>
 save & activate.
 Repeat the above process in ME21N to see customer data fileds in CUSTOMER DATA tab
After the above Modifications CUSTOMER DATA is   displaying like this

Adding field in MIRO screen

Hi ,
There is a requirement to add a new field in MIRO screen.
I mean that a new field needs to be made visible.
Please let me know of how to proceed with it in SPRO.
Thanks

Hi,
maybe this can help you:
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Best regards.

Adding field to standard screen in tr. FPSEC1

Hi,
I need to add customer field to standard screen in FPSEC1 transaction (screen 202,second screen in transaction (non cash choice)).
Has someone did it already?
(please don't give me general advices as "find screen exit" and so on...)
Point's will be given.
Regards.
Yossi.R.
*sorry for crossposting

How you solved this.
I am facing same problem
Please reply.

Adding field to IE05 screen

Hello All,
Is it possible to add a field for IE05 screen?
I want to add some fields like class, characteristic etc.
Is there a screen exit or bapi for this?
Thanks.

Hi,
I am asked to indicate a package for this enhancement spot and it must be a SAP package.
How can i find the correct package?
Thanks.

Adding field to std screen mm01

Hi folks,
i want to add a feild( idnlf ) to mm01 transaction.iam able to add the feild, bt data is not updating in mara table.iam using enhancement mga00001.in enhancement i wrote code as:
Tables: Mara.
Data: idnlf type mara-idnlf.
if sy-ucomm = 'BU' or sy-ucomm = 'YES'.
import mara-idnlf from memory id 'IDNLF'.
move mara-idnlf to cmara-idnlf.
endif.
and in function group screen :
MODULE ASSIGN_DATA INPUT.
if sy-tcode = 'MM01' or
sy-tcode = 'MM02'.
export mara-idnlf to memory id 'IDNLF'.
endif.
ENDMODULE.
My question is if im adding custom field the data is updating.but if iam using standard field(idnlf) the data is not updating.please let me know can we add standard field and update if so how.
please do needful.
Thanks,
Neelima.N

Hi,
Did you check Re: Screen Exit for MM01.
Hope this helps you
Raj

Adding field/column in screen painter SE51

We are trying to add field BSEG-VBUND for transaction code FSB1 fast entry screen (program SAPMF05A screen 8503). The new column will be after CoCd. However as the image below shows, TradPart is only on the first row but is needed on all rows as the other fields are.
We tried to use grouping to include BSEG-VBUND for all rows and in screen layout editor it seems to be correct.
But, when the syntax is checked the error states BSEG-VBUND is not assigned to a loop and that it must appear in "PBO" (PROCESS BEFORE OUTPUT) and "PAI" (PROCESS AFTER INPUT).
We added BSEG-VBUND to PAI but then received the error that this is not assigned to a loop.
As a functional - not technical - consultant, I am unfamiliar with how to correct this. Any suggestions are greatly appreciated.

Siripuram,
Thanks for tying to help. As I am not an ABAP programmer but just functional support, I am unfamiliar with where to make the change.
The current logic is below. Any help with this is appreicated.
PROCESS BEFORE OUTPUT.
        MODULE DYNPRO_KOPF_MODIF.
        MODULE STATUS_SETZEN_Z.
        MODULE SCHNELLERFASSUNG.
        MODULE REF_STARTZEILE_SB.
      LOOP.
        MODULE REF_BELEGZEILE_SB.
      ENDLOOP.
        MODULE REF_FUSSZEILE_SB.
PROCESS AFTER INPUT.
        MODULE EXIT AT EXIT-COMMAND.
        MODULE PAI_ANFANG.
      FIELD BKPF-XMWST MODULE XMWST_SAKO.
      LOOP.
      CHAIN.
* GENERATE-BEGIN, PLEASE DO NOT DELETE
        FIELD BSEG-BSCHL.
        FIELD RF05A-KONTO.                                 "&FG&C
        FIELD BSEG-WRBTR MODULE STERN_BETRG ON *-INPUT.
        FIELD BSEG-MWSKZ.                                  "&F4&E
        FIELD BSEG-PRCTR.
        FIELD BSEG-KOSTL.
          FIELD BSEG-AUFNR.                                "&MC&A
        FIELD BSEG-BUKRS.
* GENERATE-END, PLEASE DO NOT DELETE
        MODULE MWSKZ_DELETED.                    "Note1405100
        MODULE SCHNELLERFASSUNG_KB ON CHAIN-INPUT. "Kontierungsblock
        MODULE SCHNELLERFASSUNG    ON CHAIN-INPUT.
        MODULE MWSKZ_PRUEFEN       ON CHAIN-INPUT.
        MODULE WAEHRUNGSFELDER     ON CHAIN-INPUT.
        MODULE BETRAG_PRUEFEN      ON CHAIN-INPUT.
* MODULE-BEGIN, PLEASE DO NOT DELETE
        MODULE RW_PRUEFUNG_POS ON CHAIN-INPUT.            "&MO&C
* MODULE-END, PLEASE DO NOT DELETE
        MODULE GESCHAEFTSBEREICH.
        MODULE TXJCD_PRUEFEN.
      ENDCHAIN.
        MODULE ZEILE_SPEICHERN.
        MODULE ZEILE_KOPIEREN.
      ENDLOOP.
        FIELD RF05A-NEWBS MODULE MC_OBJEKT_SETZEN.
        FIELD RF05A-NEWBK MODULE MC_BUKRS_PARM_SETZEN.
      CHAIN.
        FIELD RF05A-NEWBS.
        FIELD RF05A-NEWKO.
        FIELD RF05A-NEWUM.
        FIELD RF05A-NEWBW.
        FIELD RF05A-NEWBK.
        FIELD OK-CODE.
        MODULE GET_REQUESTED_LINE.
        MODULE FUSSZEILE_BEARBEITEN.
      ENDCHAIN.
PROCESS ON VALUE-REQUEST.
* F4-BEGIN, PLEASE DO NOT DELETE
        FIELD BSEG-MWSKZ MODULE F4_MWSKZ.                  "&M4&E
* F4-END, PLEASE DO NOT DELETE
        FIELD RF05A-NEWKO MODULE F4_NEWKO.
        FIELD RF05A-NEWUM MODULE F4_NEWUM.
Any help with this is greatly appreciated.

Adding Field on Selection Screen in Standard program

Hiiii,
We have a requirement to add a field Business Place (BUPLA) on the Selection Screen.
TCode - S_ALR_87012082, Program Name - RFKSLD00
Please give me some idea, so that i can modify this program !!
Nitin Garg

Hii Klaus,
Okay, If as per your aspects there is no need of modify logical database, so Plz let me know how can i enhance RFKSLD00 to add Business Place.
I try to find Badi for it, but i think there is no suitable Badi findings . Plz give solution soon .
Nitin Garg
Edited by: Suhas Saha on Oct 19, 2011 2:22 PM

Adding Field to CO24 screen

Dear All,
V have a request where the client wants the Header Material No( AFKO-PLNBEZ) in the screen of co24.
presently we are getting the Matrial Text from AUFK table.
In the Trace we found that AFKO table is not accesed. But only AUFK, is being used.
Can someone suggest, how to proceed.
Thanx in Advance.
Regards
Ajju

Hi Ajaz,
Are you asking about how to retrive AFKO-PLNBEZ or
to add new input-field for AFKO-PLNBEZ in the screen?
This is answer to former, Tables AUFK and AFKO are linked
through AUFNR i.e. order number. AFKO-AUFNR is eferencing
AUFNR primary key of table AUFK, you can easily retrieve AFKO-PLNBEZ using this relation.
To add new field to screen you'll have to use user-exits.
I have no idea about that, but you can check txn SMOD,
CMOD.
Hope it helps you.
Regards,
Narinder Hartala

Advanced Search Help in PCUI & adding fields to SRES screen structures

I have linked the application COMM_IBASE to the POST_CODE1 field in CRMM_ACCOUNT (SRES area - field group ACC_SRES_CITY). When the user clicks the drop-down icon next to the post code field, a new window opens which shows COMM_IBASE.
We use our IBase to hold locations/addresses.
Is it possible to set up the system such that on selection of an IBase component, relevant address fields of that component are sent back to corresponding fields in the calling application, CRMM_ACCOUNT? Namely, Post code, street, city, country, region? I think my problem might be that these fields are not available in the screen structure of the COMM_IBASE Search Results area (CRMT_BSP_IBASE_RESLIST). How should you go about extending this structure? I can't see how it can be done using the EEW in the way you would extend, say, a service order.
I have the cookbook in front of me, but am finding sections 6.1.3.2/3 a little reticent here.
Thanks,
Alex.

I solved it.
It wasn't too complicated, either, so I suspect my difficulty was down to me being totally unfamiliar with the PCUI (I usually do ICWC development) and this being the first PCUI requirement I have ever been given to work on.
Anyhow, if any other newbies are interested in how I implemented advanced F4 help to integrate searching of an IBase of addresses with postcode field of BP creation, then please reply to this post and I will give details.
Alex.

Adding a BSEG field to the FB03 dynamic selection screen

Hello,
We have a requirement wherein we want to add a field from BSEG in the dynamic selection screen of FB03.
We found that the logical database behind this is BRF. So we created a u2018CUSu2019 selection view for the logical database and added the field from BSEG to the functional group
and checked the checkbox u201CPreselectu201D for it to appear automatically in the FB03 screen.
But we still couldnu2019t see the field in FB03 dynamic selection.
On analysis, we found that only tables are that are defined in the nodes (Extras  Selection views) can be used to create the dynamic selection and BSEG was not available
as one of the node. So we added BSEG as one of the node by adding the below code to the SELECTION of the logical database.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE BSEG.
Even after that, we couldnu2019t see the field from BSEG in the dynamic selection.
Are we missing anything here?
I see many threads here on similar lines but no one has posted the exact step. Any help is highly appreciated.
Thanks a lot.
Regards,
Suganya

Hi
If you want to take the line item details than you can refer these t-codes rather than customizing.
S_AC0_52000887 - Receivables: Profit Center
S_AC0_52000888 - Payables: Profit Center
S_ALR_87012332 - G/L Account Statements
Here by using the dynamic selection you can get the results. Use object list display and select the layout for more fields.
Thanks

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Add certain field at dynamic selection screen in FBL3N transaction

Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris Kim

Hi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n

Adding new field to MB51 screen output

Hi All,
I need to add a new field TCODE2 from MKPF table on the screen output of MB51. I have added my new field thro SPRO following the below steps:-
Go to SPRO -- MM -- Inventory Management and Physical Inventory -- Reporting -- Define Field Selection for Material Document List
Here I have give
RM07DOCS MKPF TCODE2 Transaction code -- output box checked
and saved.
Now I tried to re-execute the transaction MB51 but not able to see the Tcode2 on the output screen .
Can any one help me out, if I am missing out something or is there any thing else i need to check on the ALV output to see the field TCODE2 on the screen og MB51?
Regards
Shilpa.

Hi,
Check these notes:
Note 357187 - MB51: Fields in field catalog / selection screen
Note 828104 - Enhancing MB51 for AFS
I hope this helps you
Regards
Eduardo

Adding field dynamically on screen.

Similar Messages

Maybe you are looking for