Adding functionality to stand. sap application

hi,
can any body help
how we can add process on value request or search help for a field in standared sap application.

Hi Sai,
If you are asking about to add a new search help , then you can add it by using search help exit .
To read more about search help exits, check here .
A search help describes the standard input help process. In exceptions it could be necessary to deviate in some points from this standard. Such a deviation from the standard can also be implemented with a search help exit.
More on this. http://help.sap.com/saphelp_erp2005/helpdata/en/cf/21ee52446011d189700000e8322d00/frameset.htm
Regards,
Raghav

Similar Messages

Calling a RFC function in non-SAP application

Hi,
I can call a RFC function in a .NET application. Here there is no problem.
But if an ABAP program submitted in this RFC then I can not call this RFC?
Can I call an RFC ( it submits another abap program) non-SAP application.
Thanks.

Hi Astron,
Could you please close the thread as answered.
Regards,
Anand Mandalika.

Adding functionality to standard SAP program

HI frnz,
Please let me know how to go about my problem....
The problem is as follows
Assumptions:
1.This enhancement will not allow end users to display Street data of employee vendors in XK03 and FK03 (Display Vendor). However it will not blank out change history (if any) related to these changed fields.
2.The Street address display restriction will not be role based.
3.This enhancement is not applicable to other standard transactions (i.e. other than XK03/FK03) or custom programs where address information can be displayed by a user.
Purpose and Description:
There is a need by business to provide Vendor Master Display (XK03 and FK03) access to multiple users. However along with this access users will also be able to view Vendor employee (Account group Z002) House no/ Street address which is considered to be a sensitive information. There is thus a need to restrict user's ability to view Vendor Employee House no/Street address information. Current configurations relating to field status group does not allow to restrict this display access based on specific Account Group. This results in a need to have an enhancement which hides the contents of the fields. This enhancement will blank out the contents from the field on the next screen.
All fields to be blanked in the Street Address.
Thanks is advance..

Hi,
I just wanna know a couple of things:
1. Does this limitation to display address of the vendors apply to all user? If not, what is the criteria that should be used to identify whether user A is allowed to display employee address while user B is not allowed?
2. Is there any user assigned to maintained employee vendor and if there any, should he/she be able to maintain address data? (XK02/FK02)
3. Is there any user assigned to create employee vendor and if there any, should he/she be able to create address data for employee vendor? (XK01/FK01)
If you have the answer for above question, then we can start to identify enhancement needed to fulfil your requirement.

Stand-alone application generates error with function 'Ramp Pattern' (bug in application builder?)

Hello,
in my program a main.vi links to a sub-VI via 'open VI reference' and 'invoke node'. In this sub-VI the function 'Ramp Pattern' is used. The program itself runs normally, but if I build a stand-alone application using application builder I get an error message 'error 1003 occurred ..'. I believe this error is directly related to the build specifications which are as follows: the main.vi is referenced in a main build specification, the sub-VI in its own specification where the target is a LLB.
I appended an example-program that exhibits the error (when executing 'Application.exe' and pressing 'calculate ramp'). The error does not occur when disabling the 'ramp pattern' function and rebuilding the application.
I would rate this to be a bug in the application builder and would appreciate any help on how to solve this problem. However, due to the structure of the whole program the sub-VI has to remain in its own LLB.
Attachments:
RampPattern.zip ‏198 KB

There can be reasons why a VI might appear broken when loaded from an executable. For example, if you have different versions of the same VI or enum that differ in such a way as to break the calling VI, that can cause a broken arrow when loaded from the executable. If you have DLLs being called and the runtime engine can't find the DLL, that can cause a broken arrow that you might not see otherwise. Finally, there is a bug related to a VI appearing broken when its not.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Using RFC Function Module to send data to NON SAP Application

Hi friends,
Please guide me how can I send data from SAP -> Dotnet Applcation using Dotnet Connector through RFC function module from SAP side. In my scenerio, I Run Z transaction to executte RFC function module which create some data to pass to dotnet connector.
Regards,
Rajesh Kumar

Hi,
You can make use of Dotnet connector to read the content of SAP RFC .. (eaiest of all)
The RFC can be executed using connector , and can read the data simultaneously.. u need to code in dotnet for this..
else create a webservice and read it from dot net ..
Regards
Renu Gusain
Edited by: Renu Gusain on Jan 25, 2010 12:55 PM

Custom error message in SAP application log

Is there a way to add a custom error message to the SAP application log without passing the message variables MSGV1, MSGV2, MSGV3, MSGV4 and the Message class and number.
We want to pass a custom message from the BAPIRET2-MESSAGE without giving it a Message class and number. The reason for this is that we are using class based exceptions instead of the traditional message class with errors. When we catch the class based exception, we take the error text of the exception and put in in the BAPIRET2-message and set the BAPIRET2-TYPE as 'E'. Now we want to add this to the SAP application log.
The call to 'BAL_LOG_MSG_ADD' takes a structure BAL_S_MSG which is just like BAPIRET2. However this function builds the entry to the application log use the message variables MSGV1, MSGV2, MSGV3, MSGV4. There is no provision to pass in the BAPIRET2 message.
Add message to application log
CALL FUNCTION 'BAL_LOG_MSG_ADD'
 EXPORTING
 i_log_handle = app_log_handle
 i_s_msg = log_message
Thanks,
Jay

Hi Jay,
Did you see BAL_LOG_EXCEPTION_ADD?
This FM is represented by the structure BAL_S_EXC. This can have various versions as described below:
Data of BAL_S_EXC Structure / Use
EXCEPTION / Exception class from which an exception text
 is added to the log. This field must be filled.
MSGTY / Message type (MSGTY) of a T100 message.
 This field must also be filled for exceptions.
PROBCLASS,
DETLEVEL,
ALSORT, TIME_STMP / Message or exception attributes, such as
 problem class (PROBCLASS, for
 example, "very important"), level of detail
 (DETLEVEL, from 1 to 9), sort criterion
 (ALSORT, unrestricted) and timestamp
 (TIME_STMP). These fields can be displayed
 in the log (except TIME_STMP).
MSG_COUNT / This attribute is not used for exceptions.
Follow the link below for more details:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/d6/5d7f38f52f923ae10000009b38f8cf/frameset.htm">SAP Help DOc</a>
Hope this helps.
Thanks
Sanjeev

Benfits or added functionality in ecc 6.0

Hello All,
Can any one list down the benfits or added functionality in ecc 6.0 from abap point of view.
ManyThanks,
Vibha

Hi
Refer this link for ECC 5.0 & 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
A similar post
/message/1783778#1783778 [original link is broken]
You can go through the Release Notes for each of the versions after 4.6B (4.6C, 4.7 , ECC 5.0 & ECC 6.0)
http://help.sap.com/saphelp_erp2005/helpdata/en/43/688055b88f297ee10000000a422035/content.htm
For 4.7 SAP R/3 http://help.sap.com/saphelp_47x200/helpdata/en/12/9d78d6d8f74043a32e82be87e433b7/content.htm
Release Notes on SAP Web Application Server 6.30
http://help.sap.com/saphelp_47x200/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/content.htm
http://solutionbrowser.erp.sap.fmpmedia.com/
Check these links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/790e690c-0901-0010-7894-de8b3d91d78e
http://help.sap.com/saphelp_nw04/helpdata/en/94/c65839bec58b27e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a8/b9623c44696069e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/c1/1253164e665b4fa635af38b66dc166/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f5/a9673e42613f7ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/dc/6b7f2f43d711d1893e0000e8323c4f/frameset.htm
Reward points for useful Answers
Regards
Anji

What are the different functions used in sap script?

Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Mahesh

he print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'INTRODUCTION'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'ITEM_HEADER'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'ITEM_HEADER'
 FUNCTION = 'SET'
 TYPE = 'TOP'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8
Write ITEM_LINE
LOOP AT .....
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'ITEM_LINE'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'ITEM_HEADER'
 FUNCTION = 'DELETE'
 TYPE = 'TOP'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 ELEMENT = 'CLOSING_REMARK'
 FUNCTION = 'SET'
 TYPE = 'BODY'
 WINDOW = 'MAIN'
 EXCEPTIONS
 OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
 command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
 COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
 TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
 COMMAND = 'ENDPROTECT'.

SAP Application Log

Hi All,
The requirment is to create a Standard SAP Application Log using a Function module 'BAL_LOG_CREATE' and each successfull work order update should create a message in the log using FM 'BAL_LOG_MSG_ADD'. Each failed work order update should result in a exception being added to the log using BAL_LOG_EXCEPTIOn_ADD'.
please guide me on how these FM's should be used for creating the Standard SAP Application log.
Thanks in Advance.

hi tina,
please give specific SAPGUI you're using. Is it SAPGUI for Windows or SAPGUI for Java ?
If you're using SAPGUI for Java on Linux, you can refer here (http://sapbasis.wordpress.com/2007/08/22/installation-and-configuration-of-sapgui-for-java-on-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

SSO FOR NON SAP APPLICATIONS

SSO for non sap applications in EP on which siteminder sso is integrated
Posted: Aug 28, 2006 7:09 AM Reply E-mail this post
Hi ,
we have implemented Siteminder on SAP PORTAL 6 SP16 for authentication.I would like to integrate non sap application in Portal.I could not find any documentaion for setting up non sap application's in portal on which siteminder external authentication is implemented.
can anybody help for getting step by step document.
diff rewards to be given

Hi,
if you have access to service.sap.com via S-User, you can download "SAP Enterprise Portal Security Guide" in the portal section. It has dedicated descriptions about SSO-Settings, also about netegrity.
You can also search help.sap.com about "SSO" which gives you overview descriptions.
On SAP Service Net, there is also an pdf "Integrating Security functions" in the Netweaver 2004s Portal section, where the description of the Java API for the PDK is included. This is very helpfull for coding.

Copy file from FTP server to sap application server

Hi,
I am able to copy a particular file from FTP server to sap application server using FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. But here my problem is, it copies into default application server path(DIR_HIOME). I want to copy into specified folder in the application server. How can I specify the required destination path.
Can you please suggest how to achieve this.
Thanks,
Shiva Kankanala

try something like this:
data: user(30) type c value 'ftpuser', "ftp username
              pwd(30) type c value 'ftppass', "ftp password
              host(64) type c value '255.255.255.255', "ftp server IP
              cmd1(80) type c value 'lcd /dump', "location on app server where you want to copy the file
              cmd2(80) type c value 'get', "specifies you are going to get the file from ftp server
              dest like rfcdes-rfcdest value 'SAPFTPA',
              file(15) type c value 'file.txt'. "specifies file that you want to get from ftp server
data: hdl type i,
        key type i value 26101957,
        slen type i.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
    EXPORTING
      source      = pwd
      sourcelen   = slen
      key         = key
    IMPORTING
      destination = pwd.
call function 'FTP_CONNECT'
    EXPORTING
      user            = user
      password        = pwd
      host            = host
      rfc_destination = dest
    IMPORTING
      handle          = hdl.
call function 'FTP_COMMAND'
    EXPORTING
      handle        = hdl
      command       = cmd1
    TABLES
      data          = result
    EXCEPTIONS
      command_error = 1
      tcpip_error   = 2.
loop at result.
    write at / result-line.
endloop.
CONCATENATE cmd2 file INTO cmd2 SEPARATED BY SPACE.
call function 'FTP_COMMAND'
      EXPORTING
        handle        = hdl
        command       = cmd2
      TABLES
        data          = result
      EXCEPTIONS
        command_error = 1
        tcpip_error   = 2.
    loop at result.
      write at / result-line.
    endloop.
    refresh result.

How to generate crystal report in sap application

hi,,
i want to generate crystal report through sap application...
How is it possible ....?
could you help me in details?
Plz help me???????????

STEP 1: Like any other add-on project, refer SBO UI and DI COM to your project. Initialize SBO APPLICATION object and SBO COMPANY object and listen to events. (This is standard add-on project steps)
STEP 2: Add a Dataset to the project. This is used as a data source to your Crystal Reports. (For more information on this search for Push Technique Crystal Reports)
STEP 3: Add a Windows Form to your Project.
STEP 4: Add a Crystal Report Control to it.
STEP 5: Design report based on dataset added above.
STEP 6: Launch this Form with required parameters and selection criteria when any even happens.
Remember there is lot stuff available on net if you search with PUSH TECHNIQUE CRYSTAL REPORT. SAP SDN has lot answers for adding Crystal Reports integration to SAP Business One Add-On.
HTH
B Ravi Shankar

How to use matlab codes in a stand alone application without matlab license?

Hi,
I am not an expert in programming and i don't know about C++, i have a program using matlab codes and now i want to transfer it to a computer without matlab license. I've read something about using DLL, but i think i have to know C++ programming to wrtie "WRAPPER" and add some lines to the program, now transformed in C++.
I just would llike to know that really isn't any other way to integrate matlab for a stand-alone application? i read somethings in Matlab help about using COM (Common Object Model ) but i am not sure that labview works with it, and also about runtime engine and "mglinstaller.exe".
my labview version is 8, matlab is 2006, and the real problem is using matlab codes in another computer without matlab license.
Thanks
Amir

Hello Amir,
There is a MatLab script node in the LabVIEW function palette (see screenshot of the help topic) but as you can see this structure is not in the "Base LabVIEW", you might need to purchase the FDS (Full Developpment System) or the PDS (Professionnal Developpment System) of LabVIEW...
Do you know which one you have ?
Hope this helps
Message Edité par TiTou le 11-24-2006 06:38 PM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
mlab.png ‏71 KB

Download PDF File from Archiv to SAP Application Server

Hi,
I need to download the PDF file from an NAST-Dataset (how is stored from the message via SAP ArchivLink) to the SAP Application Server.
1) At first i read the Archiv-Link data via function module WFMC_GET_ARCHIVE_OBJECT_TYPE
2) Then i get the Connection-Infos via function module ARCHIV_GET_CONNECTIONS_INT
3) Now i read the file from archiv as table via function module ARCHIVOBJECT_GET_BYTES
4) Save to the SAP Appl.Server via:
   - OPEN DATASET ld_dpfad FOR OUTPUT IN BINARY MODE
   - LOOP and TRANSFER lf_archivobject TO ld_dpfad.
   - CLOSE DATASET ld_dpfad.
In the dialog of NAST-Dataset (Messages) i can open the PDF-File without any errors (display originals). But after the filetransfer to the SAP Appl.Server i get the following errors during the file opening dialog from Adobe Acrobat Reader:
- the embedded font u201CArialu201D cant to be extract
- not enough data for the picture
The reader can display the PDF-File but only without the picture (Logo) and with alternative font.
The same transfer from archiv and sending as an attachement to the BOR-Object via function module SO_DOCUMENT_INSERT_API1 works very fine and without any errors.
Can any one please help me to solve this Issue?
Thanks in Advance,
Thomas

Hello Keith,
Many thanks for your answer.
In the past i didnu2019t need the BINARCHIVOBJECT-Parameter and so i overlook this option.
Now, the File looks a little bit different, but only in the STREAM-section.
During the Fileopen-Dialog i get only one message now - "not enough data for image" and the image will not displayed. The rest seems to be correct.
The relevant coding is now:
ld_doc_typ = pf_connections-reserve.
CALL FUNCTION 'ARCHIVOBJECT_GET_BYTES'
    EXPORTING
      archiv_id                = pf_connections-archiv_id
      archiv_doc_id            = pf_connections-arc_doc_id
      document_type            = ld_doc_typ
      length                   = ld_length1
      offset                   = ld_offset
    IMPORTING
      binlength                = ld_length
      offset                   = ld_offset
    TABLES
      binarchivobject          = lt_binarchivobj
    EXCEPTIONS
      error_archiv             = 1
      error_communicationtable = 2
      error_kernel             = 3
      OTHERS                   = 4.
Zieldatei zum Schreiben öffnen
    OPEN DATASET ld_dpfad FOR OUTPUT IN BINARY MODE.
Inhalte in Zieldatei schreiben
LOOP AT lt_binarchivobj INTO lf_binarchivobj.
    TRANSFER lf_binarchivobj TO ld_dpfad NO END OF LINE.
ENDLOOP.
Zieldatei schließen
CLOSE DATASET ld_dpfad.
Where is the error for the image data?
Ciao Thomas
Push up by: Thomas Engler on May 3, 2010 4:54 PM

Best way to send an procedure/function output to the application

Hello,
What is the best way to send the output of a PL/SQL function / procedure to the application in Oracle 11g. I understand that it could be different for applications built in JAVA , .Net , SAP etc.
Could you please give a brief overview on all possible application makes.
Thanks,
Haider

Anyway, the answer is yes, v$version is derived from x$version :
SQL> desc x$version
Name                                      Null?    Type
ADDR                                               RAW(8)
INDX                                               NUMBER
INST_ID                                            NUMBER
BANNER                                             VARCHAR2(80)
SQL> select INDX,BANNER from x$version;
      INDX
BANNER
         0
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
         1
PL/SQL Release 11.2.0.3.0 - Production
         2
CORE    11.2.0.3.0      Production
         3
TNS for Linux: Version 11.2.0.3.0 - Production
         4
NLSRTL Version 11.2.0.3.0 - Production
SQL>

Adding functionality to stand. sap application

Similar Messages

Maybe you are looking for