Adding Product Using CRM_ORDER_MAINTAIN

Hello Techie,
I am creating lead for that I need to give product what are mandatory fields i should have to maintain so that i can successfully create mmy lead using crm_order_maintain.
Please give me mandatory field input for product.
Thank's In Advance.

Hello Pavel,
I also follow the same approach for partner,status,qualification,lead header ,But while coming to product its not creating what exactly issue I don't know..... I added following code can you please review and let me knw where i am missing...
ls_sales-ref_handle = '0000000001'.
ls_sales-ref_guid    = l_guid.
ls_sales-ref_kind    = 'B'.
APPEND ls_sales TO lt_sales.
ls_product_i-ref_guid        = l_guid.
ls_product_i-ref_handle      = '0000000001'.
ls_product_i-gross_weight    = '0.000'.
ls_product_i-net_weight      = '0.000'.
ls_product_i-mode            = 'B'.
APPEND ls_product_i to lt_product_i.
ls_orderadm_i-GUID         = l_guid.
ls_orderadm_i-HANDLE       = '0000000001'.
ls_orderadm_i-HEADER       = l_guid.
ls_orderadm_i-ORDERED_PROD = 'HT-1030'.
ls_orderadm_i-PRODUCT_KIND = 'X'.
ls_orderadm_i-LOG_SYSTEM_EXT = ''.
ls_orderadm_i-MODE           = 'B'.
APPEND ls_orderadm_i TO lT_orderadm_i.
ls_schedlin_i-REF_GUID = l_guid.
ls_schedlin_i-REF_HANDLE = '0000000001'.
APPEND ls_schedlin_i to lt_schedlin_i.
ls_nametab = 'ALTID_TYPE'.
APPEND ls_nametab TO lt_nametab.
ls_nametab = 'ORDERED_PROD'.
APPEND ls_nametab TO lt_nametab.
ls_nametab = 'PRODUCT'.
APPEND ls_nametab TO lt_nametab.
ls_input_fields-REF_HANDLE = '0000000001'.
ls_input_fields-OBJECTNAME = 'ORDERADM_I'.
ls_input_fields-field_names[] = lt_nametab[].
INSERT ls_input_fields INTO TABLE lt_input_fields.
CLEAR : ls_nametab,lt_nametab[].
Thank's,
Tasnim

Similar Messages

CRM_MKT_MODIFY_ORDER for Adding Products in Journal

Hi ,
We are trying to insert Product and Journal Data in
CRM_MKT_MODIFY_ORDER BAdI.
The CRM_ORDER_MAINTAIN FM being called with proper data after this BADI call.But no
products are getting created in Journal.Journal is cerated.
Also Observed we can't do in ORDER_SAVE BAdI ,As GUID not available in order save when the
activity being created in back ground
Please post me if any code available with you for adding products.If posible ,drop u r mail id ,So i can send more info.
Reference FM related to Adding products in CRMV_EVENTS will also OK.
PS : This Campaign run actually create multiple activities in back ground.
Message was edited by: Ranganatha Prasad Kurupati

Hello,
Regarding CRMV_EVENT, have a look to CRM_PRODUCT_I_A_CHANGE_PROD_EC.
Could you send me your coding at [email protected]?
Regards,
Frédéric

Updating price conditions using CRM_ORDER_MAINTAIN

Hello everyone!
Could anyone help me out with respect to price updation using "CRM_ORDER_MAINTAIN"?
I am supposed to do the following:
I obtain the current unit price for a sales order item using "CRM_ORDER_READ". The feild et_pridoc-pric_cond-kbetr gives me this value. Then i get new price for the product from a condition table. I compare this new price with the kbetr value for a particular condition type. If the new price is less than the kbetr value then i should update the kbetr value of the item using "CRM_ORDER_MAINTAIN". I am sending all the parameters necessary to the FM.
I have gone through the previous posts with the same query but with no luck i am running out of ideas! Any sample code will be greatly appeciated.
Thanks and Regards,
Smitha

hi,
please pass all the parameters & check updating parameters.like when u create a new entry u need to enter X & modify Y so pass all the parameters ...
thanks,
chaitanya

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

HP Laserjet Pro MFP M125A " A Fatal Error Occured Preventing Product Use" on Window XP SP3

Dear Friends,
I really need your help on this issues, recently company that i been working buy 19 Unit of HP Laserjet Pro MFP M125A printer to be install at our 19 branches. All of our branches is using Window XP SP3 and the spec is exceed the minimum requirement stated at the box of the HP Printers which means by rights, it should be no problems.
However, I sent and setup the printer at 4 branches only 1 is a success. others 3 centre is showing the same errors which is A Fatal Error Occured Preventing Product Use. I been trying to install using original CD provided by HP and driver provided at HP Support also given the same errors. The 1 Centre that OK PC spec is almost the same as the others 3 and all using default programs and software. So i dont knows what really is the problem.
This is the things i have done in hoping to successfully install the driver but WITH NO SUCCESS:
Clear temp file, disk cleanup, defragment disk and restart PC.
Reinstall Windows SP3 and restart PC.
Install basic driver only and using control panel > device and printer > add printer (Select Driver Manually). (See Pic Below)
Repair windows using original windows XP SP3 CD.
Re-Check for USB.INF file.
Repair Registry with reg cure.
Uninstall USB support and etc (Google), then re-install the printers.
Uninstall Antivirus, disable all startup and services.
Install using FULL DRIVER, BASIC DRIVER AND DRIVER MANUAL.
Sometime when running the installer, it will prompt the below error signature and HP installer will loading quite long and then crash, but others PC don't have this errors, it straight away to the installation menu until DETECTING PRINTER until 99% and shows errors "A Fatal Error Occured Preventing Product Use".
It seems that almost everythings i try cannot make the printer driver to be install. However, the SCAN driver is install successfully. Currently the printer only can PHOTOCOPY AND SCAN, without being able to print.
Please anyone which facing similiar issues to HELP ME. anythings i can do, to install the printer DRIVER.
THANKS!

Hi @gendit ,
I see that you are having issues installing several Laserjet Pro MFP M125A printers on several Windows XP computers. You are getting "A Fatal Error Occured Preventing Product Use". I can help you with this.
What version of .NetFrameworks do you have? Check Your DOTNET.
You might have to run the Windows Updates. I would update the .Netframeworks to 4.0.
I believe HP software piggy backs Internet Explorer. Should have at least Internet Explorer 6.0.
Please try these steps, most likely the wrong driver is getting installed, giving you the Fatal error.
Disconnect the USB cable.
Uninstall the printer software from the CD.
Run the software again, immediately after connecting the USB cable, follow this document to update the driver before it errors out again. A Fatal Error Displays During Software Installation.
If the issue persists, here is a document with some different steps to try.
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows.
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

A fatal error occurred preventing product use, LaserJet Pro 200 color MFP M276nw

When trying to install the full printer software suite, as soon as I click the button to install after the .exe is extracted, I get an alert window with, "A fatal error occurred preventing product use." No error code, just an option to close the dialog. I have read all the related support topics and similar threads and tried all the solutions to no avail. Pasted below is the detailed error log. Any help at all would be much appreciated, Happy New Year!
Version=1
EventType=CLR20r3
EventTime=130330861946634368
ReportType=2
Consent=1
UploadTime=130330861947102369
ReportIdentifier=b741489f-732d-11e3-ad06-78e7d1894a6a
WOW64=1
Response.BucketId=3240107344
Response.BucketTable=5
Response.type=4
Sig[0].Name=Problem Signature 01
Sig[0].Value=hpbcsiinstaller.exe
Sig[1].Name=Problem Signature 02
Sig[1].Value=5.0.3.8039
Sig[2].Name=Problem Signature 03
Sig[2].Value=4fe20fe8
Sig[3].Name=Problem Signature 04
Sig[3].Value=hpbcsiInstaller
Sig[4].Name=Problem Signature 05
Sig[4].Value=5.0.3.8039
Sig[5].Name=Problem Signature 06
Sig[5].Value=4fe20fe8
Sig[6].Name=Problem Signature 07
Sig[6].Value=e
Sig[7].Name=Problem Signature 08
Sig[7].Value=1e
Sig[8].Name=Problem Signature 09
Sig[8].Value=System.TypeInitialization
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.768.3
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
UI[3]=HP Installer has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\SYSTEM32\MSCOREE.DLL
LoadedModule[3]=C:\Windows\syswow64\KERNEL32.dll
LoadedModule[4]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[5]=C:\Windows\system32\apphelp.dll
LoadedModule[6]=C:\Windows\AppPatch\AcLayers.DLL
LoadedModule[7]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[8]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[9]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\USER32.dll
LoadedModule[13]=C:\Windows\syswow64\GDI32.dll
LoadedModule[14]=C:\Windows\syswow64\LPK.dll
LoadedModule[15]=C:\Windows\syswow64\USP10.dll
LoadedModule[16]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[17]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[18]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[19]=C:\Windows\syswow64\ole32.dll
LoadedModule[20]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[21]=C:\Windows\system32\USERENV.dll
LoadedModule[22]=C:\Windows\system32\profapi.dll
LoadedModule[23]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[24]=C:\Windows\system32\MPR.dll
LoadedModule[25]=C:\Windows\system32\IMM32.DLL
LoadedModule[26]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[27]=C:\Windows\Microsoft.NET\Framework\v4.0.30319\mscoreei.dll
LoadedModule[28]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll
LoadedModule[29]=C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a\MSVCR80.dll
LoadedModule[30]=C:\Windows\assembly\NativeImages_v2.0.50727_32\mscorlib\9a6c1b7af18b4d5a91dc7f8d6617522f\mscorlib.ni.dll
LoadedModule[31]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorsec.dll
LoadedModule[32]=C:\Windows\syswow64\WINTRUST.dll
LoadedModule[33]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[34]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\COMCTL32.dll
LoadedModule[36]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[37]=C:\Windows\system32\rsaenh.dll
LoadedModule[38]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[39]=C:\Windows\system32\ncrypt.dll
LoadedModule[40]=C:\Windows\system32\bcrypt.dll
LoadedModule[41]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[42]=C:\Windows\system32\GPAPI.dll
LoadedModule[43]=C:\Windows\system32\cryptnet.dll
LoadedModule[44]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[45]=C:\Windows\system32\SensApi.dll
LoadedModule[46]=C:\Windows\system32\uxtheme.dll
LoadedModule[47]=C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll
LoadedModule[48]=C:\Windows\system32\RpcRtRemote.dll
LoadedModule[49]=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiCommonTools.dll
LoadedModule[50]=C:\HP_LaserJet_200_color_MFP_M276\Installer\NLog.dll
LoadedModule[51]=C:\Windows\system32\VERSION.dll
LoadedModule[52]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System\5d22a30e587e2cac106b81fb351e7c08\System.ni.dll
LoadedModule[53]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Configuration\29f3ae8d313e62b4daed1107ccd29f9f\System.Configuration.ni.dll
LoadedModule[54]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Xml\a9852a75edb6ed7cd5271b05519f5b56\System.Xml.ni.dll
LoadedModule[55]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Drawing\5aa44bce7933e4de09d935848f868a4b\System.Drawing.ni.dll
LoadedModule[56]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Windows.Forms\ef0a534be135cd8f0d99d938d8b1814a\System.Windows.Forms.ni.dll
LoadedModule[57]=C:\Windows\assembly\NativeImages_v2.0.50727_32\System.Data\764054efc88f51b54c8d7e44df26b671\System.Data.ni.dll
LoadedModule[58]=C:\Windows\assembly\GAC_32\System.Data\2.0.0.0__b77a5c561934e089\System.Data.dll
LoadedModule[59]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[60]=C:\Windows\syswow64\NSI.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=CLR20r3
AppName=HP Installer
AppPath=C:\HP_LaserJet_200_color_MFP_M276\Installer\hpbcsiInstaller.exe
ReportDescription=Stopped working

Did you try to uninstall every .NET and then try again? Follow this guide:
http://knowledge.autodesk.com/support/autocad/troubleshooting/caas/sfdcarticles/sfdcarticles/How-to-...

Help: How to use 'CRM_ORDER_MAINTAIN'

Hi All,
I want to create a sales order with following requirements.
1) schedule lines having requesting dates for which vendor cannot deliver.
2) change the status from open to some other status.
i this i have to use
'CRM_ORDER_MAINTAIN". but i want to know will this API takes care of updating ERP system?
when i change the status will it also update the purchase order in ERP?
And also give me some code as how to change status and change schedule lines using 'CRM_ORDER_MAINTAIN".
Thanks in advance,
Regards,
Ujwalkumar

Hi Robin,
I am facing problem with CRM_ORDER_MAINTAIN.
I am trying to change the status of service order from New to Shipped.
Below is my code.Please look into it and let me the issue.
Thanks.Rushikesh
REPORT ZRD1.
data:IT_STATUS TYPE CRMT_STATUS_COMT,
     wa like line of it_status.
DATA : ls_input_field         TYPE crmt_input_field,
       ls_input_field_names   TYPE crmt_input_field_names,
       lt_input_fields        TYPE crmt_input_field_tab,
       CT_PARTNER_ATTRIBUTES TYPE CRMT_PARTNER_ATTRIBUTE_COM_TAB,
       l_i_orderadm_h         TYPE CRMT_ORDERADM_H_COMT,
       l_i_orderadm_i         TYPE CRMT_ORDERADM_I_COMT,
       l_i_obj_guids          TYPE CRMT_OBJECT_GUID_TAB,
       ls_i_obj_guids         like line of l_i_obj_guids.
wa-REF_GUID = '47FDBF975F6100E1E10080000A0630A7'.
wa-ref_kind = 'B'.
wa-status = 'E0023'.
wa-USER_STAT_PROC = 'ZRV_ST01'.
wa-activate = 'X'.
APPEND wa TO it_status.
      ls_input_field-ref_guid = '47FDBF975F6100E1E10080000A0630A7'.
      ls_input_field-ref_kind = 'B'.
      ls_input_field_names-fieldname = 'REF_GUID'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'REF_KIND'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'STATUS'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'USER_STAT_PROC'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      ls_input_field_names-fieldname = 'ACTIVATE'.
      INSERT ls_input_field_names INTO TABLE ls_input_field-field_names.
      INSERT ls_input_field INTO TABLE lt_input_fields.
*Start of solution1.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
EXPORTING
      IT_STATUS                     = IT_STATUS
CHANGING
   CT_INPUT_FIELDS                  = lt_INPUT_FIELDS
   ct_orderadm_h                    = l_i_orderadm_h
   ct_orderadm_i                    = l_i_orderadm_i
EXCEPTIONS
      ERROR_OCCURRED                = 1
      DOCUMENT_LOCKED               = 2
      NO_CHANGE_ALLOWED             = 3
      NO_AUTHORITY                  = 4
      OTHERS                        = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ls_i_obj_guids = '47FDBF975F6100E1E10080000A0630A7'.
append ls_i_obj_guids to l_i_obj_guids.
CALL FUNCTION 'CRM_ORDER_SAVE'
EXPORTING
it_objects_to_save = l_i_obj_guids
EXCEPTIONS
document_not_saved = 1.

How to use crm_order_maintain

hi Experts,
i am new to CRM .i am creating aweb dynpro application for service desk for message creation with few custom fields . for that i analysed standard transcation crmd_order , how it is creating transaaction . i found it is using crm_order_maintain in side to creating the message . i debbugged tht by putting a break-point before calling this FM . but my problem is i dont know how to populate data into the import parameters of the this FM . so can any body give idea how to populate data of import parameters of this FM . any standard prg or any link witch can help me for populating the data into the import parameters. pl suggest any links for understanding the basic CRM.
thanks in advance
setu
Edited by: setu s on Dec 22, 2008 6:24 PM

Hi,
The following link provides an example of function module CRM_ORDER_MAINTAIN:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/crm/creation%252bof%252bquatation%252bsample%252bcode
Hope this help.
Cheers,

How to add new line item based on main item using crm_order_maintain

Hi All,
can you please provide a way to create a new line item based on main line item and save in crm transaction( in house repair order) by using crm_order_maintain(from SAP GUI).
Thanks,
vinod.

Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay

REG: Creation of Warehouse product using transaction /SCWM/MAT1

Hi,
My requirement is to create Warehouse Products using Transaction /SCWM/MAT1 , I am using BAPI_PRDSRVAPS_SAVEMULTI2 , but I cound't able to process this because I did find Warehouse number in this BAPI, Am I using correct BAPI, if that is the case let me know the BAPI for warehouse product data,
Thanks
RK

Hi,
There is no specific list, it depends completely on the condition types that have been configured in your system.
The answer you were given was a good one and gave you as much detail as you could expect.
If you are having a particular problem or issue then let us know and we will do all that we can to help.
The easiest way to find out the "list" is to simply click on the "possible entries" tab at the right of the field. !!!!!!!!!!!
Steve B

Problem in Creating the Product Using COM_PRODUCT_MAINTAIN_MULT_API

Dear CRMExperts,
I am working in SAP CRM 5.0 version.I want to create the Product Using the Function Module "COM_PRODUCT_MAINTAIN_MULT_API".For this i have gone through the SAP Note 810153.I copied the Report Program from that note and i developed the Report Program.but i am facing some problem.
The structures zinstall_info2_maint_t and zinstall_info2_maintain does not exist in SAP CRM 5.0 Version.So i am getting Short Dump.
If anyone come across the same problem.Please help me to solve this issue.Please help me it is very Urgent.
Thanks & Regards,
Ashok.

Hi,
Note 1074357 - Implementing rollback in FM COM_PROD_MATERIAL_MAINTAIN_API
Does this help you?
regards,
Murali

[svn:cairngorm3:] 15920: Adding the use of Spark component into ModuleC to add the scenario where a Module must be able to get its default spark skin (currently this is failing due to a bug in the Module Lib)

Revision: 15920
Revision: 15920
Author:   [email protected]
Date:     2010-05-06 02:11:21 -0700 (Thu, 06 May 2010)
Log Message:
Adding the use of Spark component into ModuleC to add the scenario where a Module must be able to get its default spark skin (currently this is failing due to a bug in the Module Lib)
Modified Paths:
    cairngorm3/trunk/libraries/ModuleTest/src/example/moduleC/ModuleC.mxml

As the server.xml is big enough, I took the minimum portion of it. Hope u can proceed with it.

<Context path="" docBase="ROOT" debug="0"/>

<Context path="/xyz" docBase="pathTo_xyz" debug="0" crossContext="true"/>
<Context path="/pqr" docBase="pathTo_pqr" debug="0" crossContext="true"/>

<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
You should also provide a WEB-INF folder under pqr or xyz folder.
You should also provide a web.xml file under each WEB-INF folder.
The minimal web.xml is
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/j2ee/dtd/web-app_2_3.dtd">
<web-app>
</web-app>
That's it. Try it out. Hope it is OK.
Hafizur Rahman
SCJP

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

How to Specify Metadata When Adding Content Using iTunes U Web Service?

I've been developing Java applications using iTunes U Web service and uploaded content to iTunes U site using iTunes U Web service without problem. Now I want to add metadata fields (name, artist name, album name, etc.) for the tracks I uploaded. It seems to me that "AddTrack" will do. So I tested it but it neither adds a track under the specified group nor updates metadata fields for an existing track. It turned out "MergeTrack" actually updates metadata fields for an existing track. So is there any way to specify metadata at the time of adding content using iTunes U Web service? And what exactly does AddTrack do? This is all about contents hosted by iTunes U site and no RSS is involved.
I'm referring to the "AddTrack" method in iTunes U Web service:
http://deimos.apple.com/rsrc/doc/iTunesUAdministrationGuide/iTunesUWebServices/c hapter18_section_21.html#//appleref/doc/uid/AdminGuide-CH13-SW26

Thanks for all the replies. My question is whether there is any way to specify metadata WHEN adding content using iTunes U Web service. Specifying metadata AFTER adding content can be achieved by MergeTrack (weird naming) and it does work.
As for setting track level meta-data in the media file and then upload it, there're several reasons against that, among which are:
1. Some track metadata are context-dependent. A video about buildings on Michigan Ave in Chicago can be track #2 in a history course and described as "historic view of the Magnificent Mile", but the same media can also be track #5 in a landscape design course and described as something like "contemporary architecture". Setting these metadata in the media file itself is not the preferred way to do it since it implies maintaining a version of the same media for any course/group it gets uploaded to.
2. Setting metadata in a location separate from the media file helps track the metadata change and search for media without digging into the media itself.
3. If MergeTrack "updates" metadata, there got to be some other method that "creates" metadata - that's what a well-designed API should look like. And setting metadata in the media file is not an equivalent to a "create metadata" method call. In rickwolf's term, that implicit AddTrack should actually be made explicit so the party uploading content can explicitly specify metadata instead of having iTunes U extract metadata from the media.
It is still not clear what "AddTrack" does exactly, maybe rickwolf is right - it's only relevant to tracks created through RSS.
So it seems to me there is no other way to specify metadata WHEN adding content using iTunes U Web service than setting metadata in the media file. To me it is more like a design flaw.
Message was edited by: Stone Xiang
Message was edited by: Stone Xiang
Message was edited by: Stone Xiang

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

The recent upgrade for i-tunes prevents me from adding and using the Field, "Show". How can I add this field in i-tunes?

Hold down shift as you right-click > Get Info to get the old style dialog box.
tt2

Adding Product Using CRM_ORDER_MAINTAIN

Similar Messages

Maybe you are looking for