Addition of new qty. column in COR6N

Hi Experts,
I am woking on project where in COR6N, they are demanding that besides the calculated quantity column, one more column should be there for just the replica of the calculated quantity column for statistical purpose and in the original calculated quanaity column they want to book the unplanned consumption simultaneously with the planned quanaity.They want to avoid its postinng through MB1A against the order wise unplanned consumption.
Thanks
Nitin

Hi Nitin,
You can do this with the screen exit for COR6N.
Take the help of ABAPer .
Regards,
Sandesh

Similar Messages

Impact of Addition of New Value Fields in the existing Op. Concern-COPA

Hi All,
Want to know the steps of adding new value fields in the existing operating concern in COPA?
What is the overall impact of addition of New Value fields in the running Operating Concern?
How do we test the addition of new value fields?
Is the addition of New Value fields to the running Operating Concern advisable?
Your support and advice is highly anticipated and appreciated.
Thanks & Regards
9819528669
Ohter details are as follows...
VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields)
1)     The client requires three new value fields to be created. Value fields for :
-     Other Airport Charges - International
-     Cargo Commission Cost
-     Personal Cost (Direct)
2)     What are the Steps involved in creation of new value fields? The steps are :
1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
4)     If yes then, Do I need to perform additional configuration or can I proceed to transport it to Production?
5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
6)     What are the different methods of cost and revenue allocations in SAP?
7)     I have checked the status of the value fields across clients, It is as followsu2026
     Value Field     Value Field For     Description     Development      Quality     Production
1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
#DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

HI sree,
ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
Thank You!
Best Regards,
pradheep.

New table/column in publication breaks replication

Hi,
SQL 2008R2
I added a control table to a database that is being replicated to a different server. The tabled called [__Updated] has one column called [DateUpdated] of type datetime2. I manually created the table in the subscriber, added the new table/column
to the list of articles and ran the replication.
It falls over with the error shown below, any ideas?
2015-02-24 16:23:34.32 [95%] Generating schema scripts for article 'AAA'
2015-02-24 16:23:34.32 [95%] Generating schema scripts for article '__Updated'
2015-02-24 16:23:34.33 [95%] The replication agent had encountered an exception.
2015-02-24 16:23:34.33 Source: Unknown
2015-02-24 16:23:34.33 Exception Type: Microsoft.SqlServer.Management.Smo.FailedOperationException
2015-02-24 16:23:34.33 Exception Message: Script failed for Table 'dbo.__Updated'.
2015-02-24 16:23:34.33 Message Code: Not Applicable
2015-02-24 16:23:34.33
Exact version is:
SELECT @@VERSION
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4000.0 (X64)
Jun 28 2012 08:36:30
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)

Replication is considered to be a mature technology which means there are little changes. Oracle publishing is gone and updateable subcriptions are gone. Other than that it is the same.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Discoverer 10.1.2 does not refresh new added column

Hello,
I need help to add a new item to EUL Business Area folder for a new added column in the database table.
When I refresh the folder in the BA EUL, the result shows no difference between the folder and the underlying table in the database; however, when I quey the table in the database, a new column is there. The refresh of the folder in the Discoverer Admin tool cannot find the newly added column. Weird!! The first time saw this problem.
Could someone shine some light on it? Would be really appreciate it!
Ping

I have a slightly different problem and can't solve it! When I refresh the EUL, the result shows the differences between the folder and the underlying tables in the database. However, it does not refresh the EUL in Discoverer Administrator 10g. Nothing happens! When I try to refresh again, the same list is shown... Does anyone know what could be happening?
Thanks

Interactive Report - Display New/Changed Columns

Hi,
when I add or change a column in Interactive Reports, APEX doesn't show me the new column automatically.
Everytime the user log in, he has to go on "Actions" and "Select Columns" manually, otherwise the new/changed column won't be displayed.
How can I do that the column is displayed automatically after login?
I am using APEX 4.0.2.00.07.
Regards,
Marc

Either you, as a Developer, can save the report as Public.
Or an aithorized user can save the report as a General/Shared Report.
Or the user can save the report as a Private one.
Pick the columns you/user wants to see. Then [Action -> Save]

Addition of New Fields to CG36VEN Transaction - Import of Vendor MSDS

Hi Guys,
I have a business requirement for addition of New fields (text field and check box) in the CG36VEN transaction (Import vendor MSDS) in SAP EHS.
(Something like in the attached screenshot )
Are there any User Exits/Enhancements points available for the same? (we tried checking but couldn't find any).
If no, should we copy the function group into a custom function group and make the changes?
Please suggest the best way forward. any pointer are really appreciated.
Regards,
Gaurish Dessai

Dear Gaurish
if you check the normal process to upload "pdf" files using SAP standard import you are able to create additional data (using a SAP standard class; but you can change that using a custom specific class) by standard without the need to "modify" screens etc. . I would prefer to do the upload in a "document" class and not to ESTDH as the use of a class is standard; but yes you can use append fields in ETSDH (or use custom driven own table); In e.g. DOC-X and similar interfaces you can download then the data from the class (e.g. as in your case for "reuse" in a different data base). PLease check SAP online help or the many threads which are related to the topic of "mass bulk download of pdf SDS/MSDS files (e.g. Bulk MSDS Download))
The "correct" (best solution depending on the real customer needs) solution depends a little bit on your further use of the "on top" data which you would like to upload (and the potential risk that after e.g. 6 months user would like to get a third, fourth etc. checkbox inthe screen).
E.g. the two check boxes could be implemented as "identifiers". The "pro" of this solution is this:
a.) you can execute easily inquiries in EHS database
b.) you can extract the identifiers easily (e.g. as part of an output variant or other similar options (combination of ALE with XI/PI)
Second option: you can generate an own EHS class as part of the property tree; then you can use as well inquiry options (and ALE or other options to download the data).
As mentioned before: the "best" option (near to the SAP standard) is to use a customer exit in Cg50 (check e.g. Customer Exits in SAP EHS MANAGEMENT
and these two exits as mentioned there:
C1G20001
EHS: Menu exit 1: Report management
Yes
C1G20002
EHS: Menu exit 2: Report management
Yes
One "disadvantage" of the transaction CG36VEN is that you can upload only one document in one run. Using the exists as mentioned you can generate a more "user friedly" option to do mass uploads as well (based e.g. on key files (similar to the "Standard option" but more user friendly)..
Using this option you are as well flexible to use own customer document classes (e.g. you can/could define per "document type" one class; e.g. for REACH exposure scenarios you can use a different class in comparison to SDS upload.
A well known shortfall of transaction CG50/CG54 is the limitation in the available search options. You could not select reports based on the "check" boxes in your screen (therefore if you use "append" fields for ESTDH there is very limited option available to sue an inquiry standard SAP function to select reports of a specific type)
Therefore in most cases it is better to change your process or your approach (how you would like to store the data); e.g. to store the check boxes data on spec level (e.g. as identifier) and then by using CG02 "switch" to CG54/CG50 transaction (which is now easily possible) to check the reports (and content of the reports).
C.B.

My request shows a diff Fact table when new Dim columns added to OOB report

Hi,
I am facing this strange problem with the out-of-box BMM metadata mapping and report:
The "Dim_W_GL_ACCOUNT_D" is joined to "Fact_W_GL_OTHER_F" and "Fact_W_GL_BALANCE_F" facts. Both these fact tables have a inner join to "Dim_W_GL_ACCOUNT_D". The change I have made in th BMM is - I added 2 new logical dimensions DimA and DimB and joined these to the above 2 fact tables.
The O-O-Box "GL Account Balance" Report works fine which has 3 logical columns (GL Account Number, Financial Statement Item, GL Account Category) from the "Dim_W_GL_ACCOUNT_D" and 1 Fact column "Closing Amount" which points to the "Fact_W_GL_BALANCE_F"."BALANCE_GLOBAL1_AMT" fact.
When I add 1 logical column each from my 2 new Dims I created, the report output shows the Fact column "Closing Amount" as $0.0. Upon investigating the log, the query shows it is using the "Fact_W_GL_OTHER_F" instead of "Fact_W_GL_BALANCE_F" fact which has the "Closing Amount" column. I am not sure how. When I drop the logical column "GL Account Number" and keep my 2 new logical columns in the request, the "Closing Amount" is shown correctly. I also saw there is a Dim Hierarchy for "GL Accounts" --- the "GL Account Number" is on a lower level than the "Financial Statement Item" and "GL Account Category" columns from the same logical dimension table which are 1 level higher.
How do I make the request pull data at the "GL Account Number" level and still have the query fetch data from "Fact_W_GL_BALANCE_F"."BALANCE_GLOBAL1_AMT" (Closing Amount) with my 2 new logical columns included?
Any help is appreciated. Thanks a bunch.

I was able to fix the problem.

Report Builder chrashes when creating a new formula column

Dear all,
whenever I try to create a new formula column in the data model, that is placed outside of a query, my report builder crashes completely. The same happens on my colleagues notebook.
If anyone has an idea why this could happen, please let me know. I am currently using Version 9.0.4.1.0.
Thanks and br
Daniel

You can keep the report builder you have now. Just install the new one in new oracle home. You can download it from here
http://www.oracle.com/technology/software/products/ids/htdocs/904winsoft.html
This download has Developer Suite 10g (Report 9.0.4.0.33, Form 9.0.4.0.19, JDeveloper, Discoverer, Designer)
I don't think so you can select which product you want to install, like it was in 6i. So it will install everything.
Try to install this version. Hope this will help.
Thanks
FS

How to create new calculated column based on filtered columns?

Dear All,
I'm using Oracle Analysis.
I have two column, each one have different formula.
My Formula based on filter.
Column1
FILTER("DW"."SUM_PLAN_MONTH_AMOUNT" USING ("DW"."PLAN_YEAR" BETWEEN YEAR(DATE'@{P_BEGIN_DATE}') and YEAR(DATE'@{P_END_DATE}')))Column2
FILTER("PAYMENTS"."SUM_PAY_AMOUNT" / 1000 USING ("PAYMENTS"."PAY_DATE_PAID" BETWEEN DATE'@{P_BEGIN_DATE}' AND DATE'@{P_END_DATE}'))How to add new calculated column based on those two column?
For example:
Column1 | Column2 | NewColumn
5 | 10 | 10 / 5 * 100
7 | 12 | 12 / 7 * 100
Regards,
Eba
Edited by: Erdenebayar on Apr 19, 2012 1:42 PM
Edited by: Erdenebayar on Apr 19, 2012 3:37 PM

Hello MK,
I have a tried following formula. It is working, but result is not filtered.
I filtered "PAYMENTS"."SUM_PAY_AMOUNT" and "DW"."SUM_PLAN_MONTH_AMOUNT" columns.
"PAYMENTS"."SUM_PAY_AMOUNT" / "DW"."SUM_PLAN_MONTH_AMOUNT" * 100Can you share me some tutorial?
BR,
Eba
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM
Edited by: Erdenebayar on Apr 19, 2012 3:43 PM

How can I add new row/column into existing jTable?

Hi add!
Can you help me how can I add new row/column into existing jTable?
Tnx in adv!

e.g
Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
their handlers are:
add new row:
//i supose u already have
DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
//and
   JTabel jtable = new JTable(tablemodel);
// Handler (row)
jbtAddRow.addActionListener(new ActionListener(){
   public void actionPerformed(ActionEvent e) {
      if(jtable.getSelectedRow() >= 0 )
          tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());
       else
            tablemodel.addRow(new java.util.Vector());
    });to add new columns its the same but inside actionPerformed method:
ask for e.g "Whats the name for the new column"
then,
   tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
Message was edited by:
Java__Estudante

New Logical Column w/Case Statement

OBIEE 11g
I have a created a logical column in the BMM that I would like to display a certain output if certain criteria are met. I have a case statement like the following:
CASE WHEN COLUMN1 = 'Honda'
AND COLUMN2 = 'Accord'
THEN 'Sedan' ELSE NULL END
However when I run a report in Answers with just the new logical column created it is not showing any values. I have validated that in the dimension table there are rows that meet the above criteria.

I dont see anything wrong in the condition, I've tried with similar case for both based on logical columns and physical columns.
Can you check the physical query for the same to see how its executing?
Between: I think you can go with COLUMN2 to define the type of vehicle is? values you might have used for example, but the more specific column is enough to define the type.

New Logical Column Datatype

I am trying to add a new logical column to the BMM layer. But by default the data type is showing as UNKNOWN and is grayed out. How can i change it? I am trying to perform a calculation on the new column added.
Thanks!

Hi,
user10797474 is correct. It takes the default datatype depending on your logic. So in the properties of the column, check the "Use existing columns as source" and then click the button with the three dots. Then create your logic in this expression builder. Select the columns and formulas from the list so you do not have to type them. Once you save from the expression builder, the default datatype should be set.
Rajesh

New Logical Column using repository variables

Hello all,
Can anyone let me know how we create a new logical column in OBIEE 11g in the BMM layer using the repository variables..Is there any way/chance to create such new logica columns.If so please let me know how we will be doing that

This is alwayz possible.
Here is the syntax.
CASE WHEN VALUEOF(VAR1) ='ABC' THEN
"Sample App Lite Data"."".""."F10 Revenue Facts (Order grain)"."Units"
WHEN VALUEOF(VAR1) ='XYZ' THEN
"Sample App Lite Data"..."F10 Revenue Facts (Order grain)"."Discnt_Value"
END

Photoshop CC: I have currently Photoshop CC running on my desktop pc, now I am thinking of buying additionally a new laptop or macbook to work out of the house on my pictures. Can I use my current CC membership to install photoshop CC as well on the lapto

I have currently Photoshop CC running on my desktop pc, now I am thinking of buying additionally a new laptop or macbook to work out of the house on my pictures. Can I use my current CC membership to install photoshop CC as well on the laptop? with a macbook I have to buy a new license? how does it work?

As long as the Mac meets the system requirements you can use your Cloud software on it. With a Cloud subscription you can have two machines with working installations and they can use either or both platforms.

Adding new site columns to my issue tracking List, will result in having their Source field as blank inside the Issue content type

I have added an Issue tracking list to my SharePoint team site 2013. Then I wanted to add 5 extra columns to my list . So I did the following:-
I went to site settings.
Then I added 5 new site columns.
I went back to my list setting, I click on the “Issue” content type, and I added the 5 newly added site columns to my "Issue" content type , using the “Add from existing site or list columns” link as follow:-
And then these columns were added automatically inside the Edit, Create& Display forms.
But since this is the first time I work on such a task , so I want to make sure that I did every thing correctly. Because I am not sure why the 5 newly added site columns will have their source field inside the “Issue” content type as blank , as shown in
the above picture. So does this indicate that there is a problem ? or this is because I have added the 5 newly added site columns to the List content type and not inside the Content type at the site level ?
Thanks

Hi,
It’s by design, the Source field means the content type name.
As you said, when we create a new column, if we not attach the column to a content type, then the column would have not the source field option.
However, if you create a new column, then add the column in a content type, the content type would automatically update in the site.
Now, you would see a source content type appear.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Addition of new qty. column in COR6N

Similar Messages

Maybe you are looking for