Additional information in SDP alert report

Hi Experts,
We are generating SDP alert for "Stock below safety stock( DB alert)".
Their is a reqiurenment to add some addtional information in the output of the alert to display the SOURCE LOCATION and Shortfall qty(diff between Act and Target qty). These data is not available in standard layout of the alert report.
What's the way to get these additional information in alert report?
Regards
Shankar D

Hi Shankar,
Try using the BAdi
/SAPAPO/AM_ALERTLIST
With the method MODIFY_ALERTLIST, you can append additional fields
to an alert type and also change existing fields
Change parameters:
T_FIELD_CAT Alert-object-typical field catalog of the alert types
T_ALERTS List of alerts
Please confirm your findings
Regards
R. Senthil Mareeswaran.

Similar Messages

Not able to see the additional information fields in OIE

Hi,
After applying some patches in OIE, the additional information fields in expense report are not visible.
In Internet Expenses setup and Administration, these fields are set as 'Required'.
When we try to save the expense report, it is throwing an error that these fields are required.
But these fields are not visible to enter the information. Is any setup required for the same ?
Please advice.
Regards,
Manjusha.

Hi,
We have already bounced the apache and checked.
It is still the same.
We noticed just now that it is working for some Operating units.
Is there any way to find out what is missing in the required operating unit?
Regards,
Manjusha.

Alerts and Most Common Alerts Report information Displays Blank

Hello Sir,
Could some one help me on my Issue in SCOM 2012 R2.
Previously we use to generate all reports with out any issues, But very recently we had an issue while generating reports for "Alerts" and "Most common Alerts" Reports (from Microsoft Generic Library) its giving a blank with out any data.
Where in CPU, Memory, Disk Utilization are coming fine as expected. Only issue with "Alerts Reports" and "Most Common Alerts Report".
Not sure how to proceed further to trouble shoot this issue.
Regards,
SA

Thank you Sir,
Previously all reports works fine, but recently we had issue only for "Alerts" and "Most Common Alerts" reports which is giving the blank DATA. Please find the below screen shot of the report.
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f"></v:shapetype>
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">Could
you please assist me how to fix this issue.</v:shapetype>
Regards,
Sanjeev Kumar N
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:431.25pt;height:277.5pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\15147\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
</v:imagedata></v:shape>

Additional information: 3, Check errno.

At present, our operating system shows no disk space shortage. Nonetheless, a trace file for an error reported in the alert log shows that there was no space left on a device over the weekend without identifying the device or an affected file.
ORA-27045: unable to close the file
SVR4 Error: 28: No space left on device
Additional information: 3
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
The trace file does reference some Additional Information by a number (e.g., 3). Searching for a meaning for this number, I find that the number may represent some function. But, search does not identify the related function(s). Still, no meaning. The related error message (e.g., ORA-27045) in the Oracle Database Error Messages manual shows an Action: Check errno. The error number is itself? Still, no meaning. Where can I find helpful documentation for such references?

As requested, here is the entire trace file:
/u00/app/oracle/admin/xxxx/udump/xxxx_ora_8697.trc
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.8.0 - Production
ORACLE_HOME = /u00/app/oracle/product/9.2.0.1.0
System name:     SunOS
Node name:     bumblbee
Release:     5.8
Version:     Generic_117350-41
Machine:     sun4u
Instance name: xxxx
Redo thread mounted by this instance: 1
Oracle process number: 59
Unix process pid: 8697, image: oracle@bumblbee (TNS V1-V3)
*** 2008-12-21 06:20:49.922
*** SESSION ID:(59.21936) 2008-12-21 06:20:49.878
ORA-27045: unable to close the file
SVR4 Error: 28: No space left on device
Additional information: 3
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 4
Our physical DBA did mention a problem with the RMAN backups. But, how do y'all know it was the RMAN backups by looking at the trace file? The Additional information above seems undocumented. And, Check errno seems kind of cryptic without a more descriptive manual reference.

CR VS 2013 error: Additional information: Failed to load database information.

We have VS 2008 (V9.0.30729.1 SP1) using .Net 3.5 under Windows Server 2003 R2 Data Center Edition. VS 2008 came with Crystal Reports Version 10.5.3700.0. We developed a little report in a winform to run against Oracle 11gR2 using the OLE DB support in the CR Report Wizard in the VS 2008 IDE. It was a standard report with some code to print the report directly to the printer with out the viewer control. Here is the working code:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport1()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=OURDBNAME;"
        connectionString += "User ID=OURUSERID;Password=OURPSW"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = ""
        sqlString = "SELECT * FROM edi_filing_source_lov where filing_source_code in ('A','E')"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "edi_filing_source_lov")
        crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 1, 99)
        Me.Close()
    End Sub
End Class
We want to migrate this report to VS 2013. We installed VS 2013 Professional (V12.0.30110.00 Update 1) under Windows Server 2012 R2 Data Center Edition. We downloaded CRforVS_13_0_9 and installed it in VS 2013. We moved the project from VS 2008 and opened it under VS 2013. It looks like it converted OK. When we run it we get the following error:
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
Additional information: Failed to load database information.
Error in File temp_f11eb1be-db98-4d33-800c-4db3b36ab14e {EEB2A9E4-8239-49CB-B016-8CE4F4C7643E}.rpt:
Failed to load database information.
More information: We can step through the wizard in VS 2013 using the standard template and add a report viewer control to the form and point it at the report and run it just fine in the VS 2013 IDE when there is no code in the form1_load event. We feel we have the Oracle.DataAccess.dll for the 11.2.0 client installed and tested correctly on the server and do not feel there is an issue with data base installation. When we add back the code above to the form1_load event and run it we get the error above.
We have the logger set up but nothing gets added to the log files.
We have tried three different ways to set the data source to resolve the error that is occurring at this line of code that is failing but with no luck:
crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.Database.Tables(0).SetDataSource(DataSet.Tables("edi_filing_source_lov"))
Do you have any other suggestions we could try?
Bruce

Hi Bruce
In my experience, the only reason for the error is that the there is an issue with the dataset and as a back up sort of a thing, the report engine is attempting to connect to the database the report was created off of. To test the dataset with the report, see this wiki on how to.
Also, ensure that you have a look at this KBA.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Customer or vendor master data to include additional information ?

Any standard Report of customer or vendor master data to include additional information ?

Hi Goutam
Can you please be specific??
When you say standard report, what do you mean by "to include additional information"??
Thanks
G. Lakshmipathi

DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

Hi,
hummmm...
The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
Task: Install new AD server promote it to DC, bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server.
1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
3) Transferred roles from old server "Server" to "PrimaryAD"
4) Brought in a new File Server replicating server "Backup-Server"
5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
If i Configure DFS Replication as follows
PrimaryAD <<>> SecondaryAD -= Works... no errors...
PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
DFS Diagnose report says
DNS name: backup-server.mydomain.com
Domain name: mydomain.COM
Reference domain controller: -- (HERE there is NO DOMAIN CONTROLLER mentioned)
IP address: 192.168.1.248,192.168.1.251,::1
Site: Default-First-Site-Name
Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings for all server to Administrator and read permissions to "Authenticated Users"
DFSRDIAG POLLAD throws following error
c:\Dfsrdiag pollad /verbose
[INFO] Computer Name: BACKUP-SERVER
[INFO] Computer DNS: Backup-Server.mydomain.COM
[INFO] Domain Name: mydomain
[INFO] Domain DNS: mydomain.COM
[INFO] Site Name: Default-First-Site-Name
[INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
[INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
Thanks
bikram

Hi,
It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
How to remove data in Active Directory after an unsuccessful domain controller demotion
http://support.microsoft.com/kb/216498
In additional, please refer to the following thread to troubleshoot the issue:
DFS is not working anymore.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Want to complete information about Generic WHT report-S_P00_07000134

Hi Experts,
I want to know complete information about Generic WHT report-S_P00_07000134
My following questions
1) Once executed report,why it is asking addition selection like address and more informaiton and where it will help.
2)Why is asking for variant,if click on yes,what will happen
3) Selected "always allow in the context"option and seen the file in c:\drive.Butnot able to understand the format.What is this and for change allow option in future,what can i do?
Please help.
Regards,
Kishore.J

Hi,
Check whether you have maintained Tax ID in T.Code J1ID Vendor Excise details.
Regards,

Alert Monitor Threshold and Information, Warning and Alerts

Hi,
I defined a Forecast Alert Profile that is supposed to display the MAPE Alert in the Alert Monitor when the MAPE for the said selection is > x %. This x as I understand is maintained in the Diagnosis group of the Master Forecast Profile.
I now try to make use of this Threshold Value Description "Variance is > %. and define >(x-10) % but less than x % as information, x % as warning and >(x +20) as error but I am unable to make out how the alerts are determined and whether these values are indeed read (threshold >)
Secondly my Alert may have been originally based on particular selection(s)- some in FG, some in BG. Some of these selections may not be assigned to the Alert Profile and the Planner may not remember at what level the forecast was carried out to begin with. So my query is at what level of selection is the Alert generated when there is no selection assigned to the Alert Profile ?
Thanks
Amit

Hi, I was hoping someone answers. It was not a profound question I believe
I am also curious to know the same with respect SDP Macro based alerts. When a Macro Alert is triggered at Cell Val > y % and it is called a "warning" per the macro definition, of what good is the information, warning and alert threshold values in the Alert Monitor ?
Does it mean the value 'Y' that I defined in macro step as 'threshold' for alert or process message can be more 'freely' defined in the alert monitor with three distinct values ? I tried testing but I am unable to conclude.
Please help me understand
Thanks
Amit

Sending Early Watch Alert Report through Email

Hi All,
For sending the Early Watch Alert Report through Email, I have completed the configuration. After adding the desired Email Address in Path Solution_manager-->goto--
> Automatic Email Transmission, do i need to create a Zjob in SCOT T-code or this is sufficient.
waiting for ur quick responses.
Regards,
Prashant.

Dear
You have to make sure your mailing of SCOT is being sent out.
Regular SCOT job for mailing is sufficient, it does not require additional one (INT option).
Kind regards
Tom
Edited by: Tom on Sep 4, 2008 9:44 AM

Additional information: The sorting already exists

I am using VB .NET 2003 and Crystal Report XI.
The report has two sorting fields and I want to change the sorting order through programming. It has been working well until my computer died. After I got a new computer and set up everything, restored the source code from Source Safe, now everytime I try to change the sorting I get this error
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in crystaldecisions.crystalreports.engine.dll
Additional information: The sorting already exists
Here is the code causing this error:
obj1.DataDefinition.SortFields.Item(0).Field = FieldDef
Where obj1 is a ReportDocument.
Does anyone know what is going on?
Thanks,
Alex

Hi, Alex;
I am not sure what the cause could be.
If you try a different report do you get the same results?
Have you installed the latest Service Pack for CR XI?
Regards,
Jonathan

You recently submitted documents to webapp1. Additional information is required to complete the submission.

Hi
users are uploading documents to drop of library
i configured content organizer to sharepoint document library
and every day night i received below email from this web applicaton to me ( i am the administrator of webapp1)
From : webapp1 <[email protected]>
You recently submitted documents to webapp1. Additional information is required to complete the submission. Follow the link below to enter the required information.
To see the list of documents that could not be routed:
http://webapp1/DropOffLibrary
adil

2 reason why you would receive this email.
1. You have set alert or someone else has set alerts on this library
2. Access request setting in site permission

You recently submitted documents to Additional information is required to complete the submission

Hi
When a user upload a document to Dropoflibrary and checkedout he keep receving email from sharepoint and how to stop it ?
You recently submitted documents to mywebapp1. Additional information is required to complete the submission. Follow the link below to enter the required information.
To see the list of documents that could not be routed:
http://10.131.0.20/sites/mywebapp1/DropOffLibrary
adil

Hi Adil,
According to your description, my understanding is that the user want to stop the email alerts.
Per my knowledge, the emails are sent from the Content Organizer settings. The Content Organizer settings are configured to send an email message to rule managers when one or both of the following conditions are true.
http://support.microsoft.com/kb/2833899
I recommend to check if the two options are checked in Content Organizer settings in the Site settings of the mywebapp1 site.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Early watch alert report

Hi,
I have a question on the Early watch alert report generated by the system on section 1.2 Disk Space and 1.3 Hardware Information and installed OS Release in the report.
I have installed Early Watch Alert for few of our customers. In the section 1.2 and 1.3 of the report generated, some of it will show the information of client workstation that connected to B1 server, some of it only show the information of the server and some only show the information of certain client workstation and not showing the server's information.
Can anyone let me know what is the setup i need to consider so that the report will show all the client workstation's information including the server or i want the report to only show the server's information.
Finally, how does system retrieve the hardware information of those client workstation since the Early watch alert is only installed on the Server, i though Early Watch Alert will only retrieve the information of the server with server tools installed.
Thanks.
Regards,
Kong Chee Ann

HI,
I think it is only contect/customizing info will be analyzed, no application data like customer names, marketing documents or similar will be transmitted in the EWA.
The contents of the data in the EWA are :
1. System data
2. database administration
3. backup of company database
4. company info . doc volume
5. Installed addons
6. Business settings
or in the EWA I installed in the server, I've got these infos :
1. Customer Info
2. Company database info
3. Software info
4. Installed addon
5. Company database backup info
6. Hardware Info
7. Company database growth
8. Company user amount
9. Document volume
it seems that it tends to give system data in the server PC and not in the client PC.
Rgds,

Information button in ALV report

Information button in ALV report is not working. any suggestion

I have copied standard tool bar from standard program.During debugging, I have found that function code is defferent. Then I changed function code according to that.

Additional information in SDP alert report

Similar Messages

Maybe you are looking for