Addon 90000002 failed with exception; Event type 6
Hi,
Ok Here's what I do to get this error.
We did program a menu that starts a .NET modal form which stays more then 10 minutes on screen. When closing the form and I did debug also to see where it gives the error and the form goes well until it is completely closed the the process return to SAP which return to it's normal loop in ItemEvent then sudently this message appears in red at the bottom and the add-on is kicked out.
If we don't handle for 10 minutes, let say 9 minutes, we don't get the error so it's like SAP doesn't like a .NET modal form to handle 10 minutes or more and I don't understand why
I don't know where to put a try catch either since there's no place where the error occurs which is nowhere that means at the end of ItemEvent in fact and there's already a Try Catch there so why the addon is kicked is a mistery to me.
Any idea ?
Hi,
You may check this thread first:
Addon Crashes
Thanks,
Gordon
Similar Messages
-
Addon 9000000X failed with exception; Event type X
Hi SDK experts,
We had a problem with occurrence intermittent, something that we identified with relation on wait of response of event.
The problem is:
My addon need to submit XML files to some webservices. In some cases this files will be send on batches, what causes the response time to events on addon is to much large.
In this cases, when the response time is much large, the B1 overthrow the addon.
In compiled mode the message is not shown. This evidence was achieved on debug time.
The error message is "Addon 90000002 failed with exception; Event type 6"
The paleative solution was implement a thread to release the event. But threads on addons can be a problem.
What the opinions?
We need a solutions. Our addon is a market product for process accounting and fiscal.
regards.
Daniel WeissmannHi,
You may check this thread first:
Addon Crashes
Thanks,
Gordon -
Add-on 9000005 failed with exception; Event Type: 1
Hi Experts,
I am woking on a project which uses DI API and creates AP Invoice by reading an excel file.
I used all the invoice in one sap transaction.
I read excel line by line and create one AP Invoice per line. It works when excel is having less then 500 records. But if there are more then 500 records or more then 600 records, it give following error to me
Add-on 9000005 failed with exception; Event Type: 1
Can anyone help me in it?
Thanks!!
RituHi,
I'm sure there is a limit to the number of rows you can add to an Invoice but I think it's probably limited on memory rather than a fixed limit on the number of rows. This might be an out of memory error that's causing the exception. Have you tried putting a try/catch around your code to see what the exact details are of the exception? Also, if you are filling in any text fields on the invoice (remarks), they are limited to 30K.
David -
Add-on 9000035 failed with exception; Event Type: 32
In loadscreen function i have load the XML form but it shows the error like
"Add-on 9000035 failed with exception; Event Type: 32"
But i will connect to some other db means its working .
Share your ideas for what is the problem to load the screen in particular DB
Thanks,
Helen. SHi,
You may check this: Add-on 9000002 failed with exception; Event Type: 32
Thanks,
Gordon -
Add-On [X] failed with exception; Event Type:16
Hi,
I'm currently trying to create a SAP B1 Add-On using C# (Framework 3.5/VS 2008). I've done several VB.Net Add-Ons in the past but this is the first one I try to create one in C#.
Using the SDK code examples, I've managed to create an Add-On that correctly connects to UI and DI (I can create a sub-menu, set event filters and add some usertables and userfields). My sub-menu opens an XML based form in SAP B1. The first time I click on the sub-menu, my form is correctly shown. But immediately after, I get the following error in the message bar at the bottom :
Add-On [X] failed with exception; Event Type:16, in which [X] is a number (like 90003), incrementing each time I stop the Add-On in Visual Studio and restart it.
After this message occurs, I cannot display another instance of the window using the sub-menu. In fact, it seems that all Add-On activity (button click, event trapping) is disabled or ineffective. The Add-On still is running in the process tree, but no response. Only the "X" is working on the created form to close it.
I've run some tests on the code and I realized that this is happening on XML based forms (using the LoadBatchActions command to load the form) and the FormCreationParams class to create a simple form. If I put the form creation line code in comments, my Add-On still runs (I can trap events on the sub-menu click) ; I can click multiple times on the menu without a problem But as soon as I create a form, it stops responding.
It also seems that as soon as I click on another menu to open a system form, the same error occurs. If I comment the form creation line code, again I can click as often as I want without getting this error message
Can anyone help me on this one ? I can post some code depending of what you may need to check this.
Thanks !Sorry, I've just found the problem ; it was caused by an unhanded exception !
Thanks ! -
Add-on 9000034 failed with exception; in blocking expire date batch in GR
Hi all ,
I try to set mandotory in expire date field in batch setup of good receipt. My code is like this
If (pVal.FormTypeEx = "41") Then
oForm = SBO_Application.Forms.Item(FormUID)
If (pVal.Before_Action = True) Then
Else
If pVal.ItemUID = "3" Then
mat = oForm.Items.Item("3").Specific
currow = pVal.Row
currCol = pVal.ColUID
If (pVal.ColUID = "10" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_KEY_DOWN And pVal.CharPressed = 9) Or (pVal.ItemUID = "1" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED) Then
Try
Dim expdate As SAPbouiCOM.EditText
expdate = mat.Columns.Item(10).Cells.Item(currow).Specific
tgl = expdate.Value
Try
If expdate = "" Then
SBO_Application.MessageBox("Expired Date empty is not allowed")
End If
Exit Sub
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
Catch ex As Exception
Debug.Print(ex.Message)
Debug.Print(ex.ToString)
End Try
End If
End If
End If
Else
If pVal.ItemUID = "41" And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE Then
Exit Sub
End If
End If
When i try to close the batch setup and return to Good receipt form there is an error message
Add-on 9000034 failed with exception; Event Type : 17
Does any one know what the error message means ?
Does I miss something ?
Thanks in advance
Regards
Jia ShunHello,
for sorting batch codes by GR time sort from high to low after finding the codes from the date(s) you want (since the batch codes are created in numeric order the lower number will be the older batch codes)
perhaps I did not understand... -
Hi everyone,
I just installed SP09 and i was testing the solution. And I found a problem with the approvals tasks.
I configured a simple ROLE approval task for validate add event. And when the runtime executes the task, the dispatcher log shows a error:
ERROR: Evaluation of approvalid failed with Exception: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'aValue'
And the notifications configured on approval task does not start either.
The approval goes to the ToDO tab of the approver, but when approved, also the ROLE stays in "Pending" State.
I downgraded the Runtime components to SP08 to test, and the approvals tasks works correctly.
Has anyone passed trough this situation in SP09?
I think there is an issue with the runtime components delivered with this initial package of SP09.
Suggestions?Hi Kelvin,2016081
The issue is caused by a program error in the Dispatcher component. A fix will be provided in Identity Management SP9 Patch 2 for the Runtime component. I expect the patch will be delivered within a week or two.
For more info about the issue and the patch please refer to SAPNote 2016081.
@Michael Penn - I might be able to assist if you provide the ticket number
Cheers,
Kristiyan
IdM Development -
Attempt to process file failed with Exception in XML Parser-format problem
Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karunHi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1 -
I have a servlet that read Swing Applet input stream. It works on my JBuilder6 with HTML very fine. But It can't work on browser(such as IE). I have error message: Please someone help me!
Mon May 19 10:00:28 EDT 2003:<E> <ServletContext-General> Servlet failed with Exception
java.net.SocketException: Connection aborted by peer: socket write error
at java.net.SocketOutputStream.socketWrite(Native Method)
at java.net.SocketOutputStream.write(SocketOutputStream.java:83)
at weblogic.servlet.internal.ChunkUtils.writeChunks(ChunkUtils.java:88)
at weblogic.servlet.internal.ServletOutputStreamImpl.flush(ServletOutputStreamImpl.java:121)
at weblogic.servlet.internal.ServletOutputStreamImpl.writeStream(ServletOutputStreamImpl.jav
a:444)
at weblogic.servlet.ClasspathServlet.sendResource(ClasspathServlet.java:114)
at weblogic.servlet.ClasspathServlet.doGet(ClasspathServlet.java:87)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:865)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:105)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:742)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImpl.java:686)
at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:
247)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:361)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Mon May 19 10:00:28 EDT 2003:<E> <HTTP> Servlet request terminated with IOException:
java.net.ProtocolException: Didn't meet stated Content-Length, wrote: '4096' bytes instead of stated
: '16093' bytes.
at weblogic.servlet.internal.ServletOutputStreamImpl.finish(ServletOutputStreamImpl.java:372
at weblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContextManager.java:
249)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java:361)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)Hi, did you get any solution for the protocol exception? I have the same problem too....
Thanks
Suresh -
Hi
I registered a web app with Weblogic 5.1 in the weblogic.properties file. I try
to run the web app from my browser typing http://localhost:7001/xxx(Webapp name)
and a jsp page. Following is the error I get. It would be helpful if some one
could point me to a fix for this problem
Tue May 01 13:56:41 CDT 2001:<I> <ServletContext-omxclient> Generated java file:
D:\weblogic\myserver\omxclient\_tmp_war\jsp_servlet\_omx\_login.java
Tue May 01 13:56:43 CDT 2001:<E> <ServletContext-omxclient> Servlet failed with
Exception
java.lang.LinkageError: Class javax/servlet/ServletConfig violates loader constr
aints
at jsp_servlet._omx._login._jspService(_login.java:59)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:105)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:123)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:742)
at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:686)
at weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:247)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:361)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Sorry, I didn't look very closely - the exception is for
javax.servlet.ServletConfig - should be in weblogicaux.jar.
Is there anything wrong with it? What service pack are you
using? Could be a problem with weblogic.policy.
mike
>>java.lang.LinkageError: Class javax/servlet/ServletConfig
"KC" <[email protected]> wrote:
>
>Hi Mike
>The login.jsp page just contains a javascript function and two text boxes
>in it.
>Will try making changing it. If that is not the issue could you let me
>know of
>any other issues.
>
>"mreiche" <[email protected]> wrote:
>>
>>I would guess that login.jsp is a very large JSP and that
>>the generated service method is too large for the classloader's
>>liking. Try making it smaller.
>>
>>Mike
>>
>>
>>"KC" <[email protected]> wrote:
>>>
>>>Hi
>>>I registered a web app with Weblogic 5.1 in the weblogic.properties
>>file.
>>>I try
>>>to run the web app from my browser typing http://localhost:7001/xxx(Webapp
>>>name)
>>>and a jsp page. Following is the error I get. It would be helpful if
>>>some one
>>>could point me to a fix for this problem
>>>
>>>Tue May 01 13:56:41 CDT 2001:<I> <ServletContext-omxclient> Generated
>>>java file:
>>> D:\weblogic\myserver\omxclient\_tmp_war\jsp_servlet\_omx\_login.java
>>>Tue May 01 13:56:43 CDT 2001:<E> <ServletContext-omxclient> Servlet
>>failed
>>>with
>>>Exception
>>>java.lang.LinkageError: Class javax/servlet/ServletConfig violates
>loader
>>>constr
>>>aints
>>> at jsp_servlet._omx._login._jspService(_login.java:59)
>>> at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
>>> at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
>>>pl.java:105)
>>> at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
>>>pl.java:123)
>>> at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
>>>textImpl.java:742)
>>> at weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
>>>textImpl.java:686)
>>> at weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
>>>ContextManager.java:247)
>>> at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
>>>a:361)
>>> at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:261)
>>>
>>> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>>>
>>>
>>
>
-
Hi,
can someone help with this issue. I've been getting this error in my logs since for the past 3 days and I don't know how to resolve it.
os-aix-64 bit
wls:10.3
####<Aug 25, 2014 11:36:18 AM GMT+05:30> <Error> <HTTP> <XXX-XXXXXX-XX> <examplesServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1408946778196> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@2ee12ee1 - appName: 'consoleapp', name: 'console', context-path: '/console', spec-version: '2.5'] Servlet failed with Exception
java.lang.IllegalStateException: Response already committed
at weblogic.servlet.internal.ServletResponseImpl.objectIfCommitted(ServletResponseImpl.java:1553)
at weblogic.servlet.internal.ServletResponseImpl.sendRedirect(ServletResponseImpl.java:838)
at javax.servlet.http.HttpServletResponseWrapper.sendRedirect(HttpServletResponseWrapper.java:136)
at com.bea.netuix.nf.HttpServletResponseWrapper.sendRedirect(HttpServletResponseWrapper.java:50)
at com.bea.netuix.servlets.controls.content.NetuiContent.handleRedirect(NetuiContent.java:234)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePreRenderResponseState(NetuiContent.java:630)
at com.bea.netuix.servlets.controls.content.StrutsContent.handlePreRenderResponseState(StrutsContent.java:224)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:310)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:54)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
TIA,
VamsiCan someone please help me with this issue.
-
Servlet failed with Exception java.lang.OutOfMemoryError: PermGen space
Hello,
I recently installed BI Apps 11.1.1.7.1 on Oracle Linux 64.
while i am trying to run the full load i.e. SDE, SILOS and PLP and sometimes while trying to access BIA Configuration Manager..I get below error. while i tried to increase the heap size to 2gb in SetOBIDomain.sh for both bi_server1 and odi_sever1.sh, it is not really affected i.e. i dont see the updated arguments while trying to re start these managed servers. i tried to restart the box and it still did not work...Any idea on where exactly to change/update the parameters to increase the heap size and any other known issues cauing out of memory issues.
<Sep 30, 2013 11:55:44 AM EDT> <Error> <HTTP> <BEA-101020> <[ServletContext@263264514[app:oracle.biacm module:biacm path:/biacm spec-version:2.5 version:11.1.1.7.1]] Servlet failed with Exception
java.lang.OutOfMemoryError: PermGen space
Thank You in advance
RakeshHi Fabian,
It seems that you have got out of memory due to PermGen space, hence increase the MaxPermGen space
java.lang.OutOfMemoryError: PermGen space
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClassCond(ClassLoader.java:632)
at java.lang.ClassLoader.defineClass(ClassLoader.java:616)
Also you can go through the below posts to get more details about JVM architecture and more details about Out of memory
Topic: Parts Of JVM And JVM Architecture Diagram?
http://middlewaremagic.com/weblogic/?p=4456
Topic: OutOfMemory Causes and First Aid Steps?
http://middlewaremagic.com/weblogic/?p=4464
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic… -
Getting error Servlet failed with Exception java.lang.IllegalStateException
Hi
I am getting this error throughout the server when i am trying to download a pdf from that page.
Im attaching the error console
2011 5:10:26 PM CEST> <Error> <HTTP> <aczocc08x.vfcz.dc-ratingen.de> <ShopSrv1_1_pre> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1306163426535> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@172d19e - appName: 'OCC', name: '/shop', context-path: '/shop'] Servlet failed with Exception
java.lang.IllegalStateException: Cannot resize buffer - 76438 bytes have already been written (Servlet 2.3, sec. 5.1)
at weblogic.servlet.internal.ServletResponseImpl.setBufferSize(ServletResponseImpl.java:338)
at weblogic.servlet.jsp.PageContextImpl.initialize(PageContextImpl.java:74)
at weblogic.servlet.jsp.PageContextImpl.<init>(PageContextImpl.java:110)
at weblogic.servlet.jsp.JspFactoryImpl.getPageContext(JspFactoryImpl.java:40)
at jsp_servlet._checkout._order.__cart_thank_45_you._jspService(__cart_thank_45_you.java:644)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at vodafone.servlet.security.HttpsEnforcingFilter.doFilter(HttpsEnforcingFilter.java:39)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at atg.servlet.pipeline.TailPipelineServlet.service(TailPipelineServlet.java:90)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:202)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:279)
at vodafone.dynamo.servlet.LocaleRedirector.service(LocaleRedirector.java:75)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:279)
at atg.servlet.dafpipeline.RecordingServlet.service(RecordingServlet.java:280)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.http.CookieBufferServlet.service(CookieBufferServlet.java:97)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.ExpiredPasswordServlet.service(ExpiredPasswordServlet.java:356)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.MimeTyperPipelineServlet.service(MimeTyperPipelineServlet.java:206)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.droplet.DropletEventServlet.service(DropletEventServlet.java:565)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.sessionsaver.SessionSaverServlet.service(SessionSaverServlet.java:2442)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.commerce.order.CommerceCommandServlet.service(CommerceCommandServlet.java:128)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.commerce.promotion.PromotionServlet.service(PromotionServlet.java:191)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.AccessControlServlet.service(AccessControlServlet.java:602)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.PageEventTriggerPipelineServlet.service(PageEventTriggerPipelineServlet.java:169)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.SessionEventTrigger.service(SessionEventTrigger.java:461)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at vodafone.servlets.ServletHelper.service(ServletHelper.java:34)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at vodafone.dynamo.servlet.DefaultCatalogFixer.service(DefaultCatalogFixer.java:54)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.commerce.profile.VodafoneSSOProfileRequestServlet.service(VodafoneSSOProfileRequestServlet.java:231)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.ProfileRequestServlet.service(ProfileRequestServlet.java:480)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at vodafone.session.SessionSynchronizationServlet.service(SessionSynchronizationServlet.java:38)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:469)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.PathAuthenticationPipelineServlet.service(PathAuthenticationPipelineServlet.java:370)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.userprofiling.sso.PassportServlet.service(PassportServlet.java:561)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.security.ThreadUserBinderServlet.service(ThreadUserBinderServlet.java:91)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:116)
at atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1100)
at atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:782)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:231)
at atg.filter.dspjsp.PageFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
Anyone has any idea or faced this issue before please guide me what is the cause, i have got a feeling that this may be because server has run out of memory.i havn't written anything before calling set buiffer sizeSo why does the exception message say the opposite?
I can see that error may be because of a jsp named cart_thank-you.jspSo can I. So have a look at it. It is writing something before the other thing is calling setBufferSize().
you can see that in erro logSo can you. -
Clear package failed with exception CX_SY_COMPRESSION_ERROR ?
Hi Experts,
When i ran a clear package it got failed with exception CX_SY_COMPRESSION_ERROR .
Hint : i ran light optimize package before running clear package and it got succeeded.
Thanks,
SivaHi,
Do you find any short dump in ST22?
It may be because of memory issue as explained in 1734382 - Process ends with CX_SY_COMPRESSION_ERROR when export transaction data to application server.
Regards,
Raju -
After connection lost SetVector fails with OCI-22303: type not found
Hi there,
I use statelessConnectionPool and after application is loosing connection to oracle for short time, all folowing setVector calls will fail with
SetVector fails with OCI-22303: type "DEMO"."PROPERTIES" not found
however its there and was working fine before connection was lost,
As far as i read about the getConection for statelessConnectionPool will reestablish connection if required to return valid connection handle, but somehow the setVector does not work.
Any idea?
Thanks in advance
AndrewHi,
I want to reconnect to same instance, I think i missed tnsnames part, did not knew its required, so i should add to client tnsnames or server the FAILOVER_MODE part?
like this example:
PAYROLL =
(DESCRIPTION =
(ADDRESS =
(COMMUNITY = TCP.world)
(PROTOCOL = TCP)
(HOST = VSERVER)
(PORT = 1521)
(CONNECT_DATA =
(SID = HR)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 15)
strange thing that connection seams to be valid only in complains about type not found, or maybe connections are not valid only i cant see it, does the not valid connections in the pool are reconnected or make new when i call GetConnection? or i should terminate connections on "end of comm channel error" so when db is reachable again it will reestablish new connections?
Andrew
Maybe you are looking for
-
How can i use an external screen on mountain lion when i'm running on battery power?
Hey all: I just upgraded from snow leopard to Mountain Lion, and i use external screen, keyboard and mouse all the time.... On Mountain Lion it's perfect when the power adaptor is connected as soon as you close the LID your external screen becomes th
-
When i add album covers to my iTunes library on Windows 7 and then sync with my iPhone ( 64Go, if that matters ), covers are lost. The weirdest thing is, if i play any song i did add covers to, the cover shows in the back. But it won't show in the al
-
Since installing Airport Express wireless connection to other devices keeps being dropped
Our home network consists of my MacBook Pro 15", my wife's quite old Compaq notebook, an Apple TV, and recently, an Airport Express. The router is one that was provided by our ISP, Alice/O2 in Germany. I think it is made by Siemens but its model name
-
Problems downloading larger applications on a iPhone 3GS
Ok, I will try my best to clearly explain what's happening. Before I even attempt to do that, I will let those who need to know. That I went through over 8 pages of many different posts trying to find a problem similar to mine, with not much luck. Th
-
What is ths maximum PDO read buffer size using the Series 2 CAN cards?
Does anyone know the maximum size for the PDO read buffer when using a Series 2 PCI NI-CAN card?