Adf checkbox

Hi,
I have popup which has a multi row table with a checkbox and 1 output textbox and 1 input textbox as below
checkbox <1234> < empty >
checkbox <2345> < empty >
Need is when the checkbox(say in the first row) is checked the 1234 needs to be copied to the input text box
when it is unchecked the input check box needs to be nulled.
Any sample code please.
Thanks

Let me clarify
When the check box is clicked my valuechangelistener works and invokes the below code ok.
if(valueFlag.equalIgnoreCase("true")){
inputTextBinding.setText("1234");
The change I did in the above code is to read from inputputtext field in place of hardcoded value 1234.
The field looks like
<af:inputText value="#{viewScope.QtyTotal}" >
How do I read this above value so that I can use it to set the inputTextBinding value please?
Thanks

Similar Messages

Strange bahavior seen in adf checkbox.

Hi!
I am setting the disabled property of a checkbox by calling a method on a managed bean in this way:
<af:selectBooleanCheckbox text="selectBooleanCheckbox 1"
label="Label 1"
binding="#{backing_TestingCheckbox.sbc1}"
id="sbc1"
disabled="#{sampleMB.status}"/>
I am observing that the sampleMB.getStatus() method is called 4 to 5 times whenever this page is rendered. If I use this methodology for setting the visible property of the checkbox then the method is called twice.
Why am I seeing this behavior?
version of Jdeveloper: 11g R1
Thanks,
Gurdev

The reason is the page life cycle.
Timo

ADF Checkboxes layout issue

Hi,
I am using JDeveloper 11.1.1.1.7.
I am using Radio Check boxes like :
     <af:selectOneRadio label="Test" id="sor21" layout="horizontal"">
        <af:selectItem label="Any" value="" id="si128"/>
        <af:selectItem label="Positive" value="1" id="si110"/>
        <af:selectItem label="Negative" value="0" id="si109"/>
        <af:selectItem label="Unknown" value="99" id="si4"/>
      </af:selectOneRadio>
The rendered check boxes are too close like shown below :
0 Any 0 Postive 0 Nagative 0 Unknown
Is there a way I can have some empty spaces in between them like :
0 Any              0 Postive              0 Nagative            0 Unknown
How to do this ?
Thank you.
Regards,
Ayyappan

Sorry for the confusion. lableStyle is a property added in 11.1.2.x (&lt;af:selectOneRadio&gt;)
Timo

ADF Faces table with checkboxes

Hi,
My dev env: jdev 11.1.1.2.0
I like to implement something like yahoo mail, with a checkbox at the column header. If selected,
all rows will be selected. I assume Yahoo's email is using javascript. How do I achieve the same
thing here with adf faces table? Is there any tutorial I could reference.
Thanks in advance!
Edited by: user1145549 on Jul 13, 2010 8:18 AM

Hi,
U can also check this too.... it very simple approach to Implement Check box
http://theo.vanarem.nl/2010/07/07/adf-checkbox-representing-a-yes-or-no-value/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+orana+(OraNA)&utm_content=Netvibes
Regards,
Suganth.G

Double click to (un)check checkbox

Hi.
I have af:table. And every row in table has checkbox. I want to do feature that when I double click on a row checkbox has to inverse current value (true => false, false => true).
I know how do proper double click and backing bean handling (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/56-handle-doubleclick-in-table-170924.pdf). What I don't know is how to proper implement checkbox (de)selecting.
I have tried to get attribute binding and set value based on current value - does not work
I have tried to simulate clicking on checkbox with JavaScript - does not work
I have bound my checkbox to backing bean and with methods getValue() and setValue() and AdfFacesContext.getCurrentInstance().addPartialTarget(checkbox) updated it - does not work
I have also tried to set ppr on iterator with test all three above scenarios - does not work
This my checkbox attribute is transient on ViewObject. And a type of String ("0" = false, "1" = true) and LOV made like here (http://theo.vanarem.nl/2010/07/07/adf-checkbox-representing-a-yes-or-no-value/)
Any ideas how to do proper checkbox selecting from backing bean?

I have tried
AdfFacesContext.getCurrentInstance().addPartialTargeton whole table, on only bounded RichSelectBooleanCheckbox attribute and also on clientEvent.getComponent() without luck.
My code snippet looks like:
    private RichSelectBooleanCheckbox indicator;
    private RichTable table;
    public void handleTableDoubleClick(ClientEvent clientEvent) {
        indicator.setValue(true);
        AdfFacesContext.getCurrentInstance().addPartialTarget(clientEvent.getComponent());
        AdfFacesContext.getCurrentInstance().addPartialTarget(table);
        AdfFacesContext.getCurrentInstance().addPartialTarget(indicator);
...indicator have binding with checkbox on page and also table on rich table on page.
Regards

BUG in SelectBooleanCheckBox component binding Simple Use Case

I have a table called Customer have four fields. Id, Name, Gender, Regular.
The sample data is
--- 23, Mark, M, Y
--- 26, Fiona, F, N
I want to show an updatable form to the end user for the same using ADF. The UI components for Name, Gender are OutputText and Regular is SelectBooleanCheckbox (Y is checked and N is unchecked)
I do the following steps
a) Create an Entity Object
b) Create a View Object and add YesNoLOVaccessor to the View object as per this post for SelectBooleanCheckBox
http://theo.vanarem.nl/2010/07/07/adf-checkbox-representing-a-yes-or-no-value/
c) Test the same using Business component tester, the model for Customer query shows up with Regular as a checkbox. Browsing through the data gives correct data for checkbox in BC tester.All good till this stage
d) Next I drag the Customer Viewobject instance in the data control to the JSPX page and add as ADF form including navigation controls. I use the Next control to browse
First record shows up as 23, Mark, M, Y and then click next to go to next record it shows up as 26, Fiona, F, Y instead of 26, Fiona, F, N
Oracle please confirm if this is a bug or I am missing something here
Thanks
Edited by: user5108636 on Jan 10, 2011 4:43 PM
Edited by: user5108636 on Jan 10, 2011 4:45 PM
Edited by: user5108636 on Jan 10, 2011 4:46 PM
Edited by: user5108636 on Jan 10, 2011 4:46 PM

Thanks I resolved it now, I am not complaining but the lack of use cases on internet for simple things does make things difficult and frustrating. I modified the ViewRowImpl java file to convert the 'Y' value as true and 'N' value as false as below.
public String getCheck() {
//return (String)getAttributeInternal(CHECK);
String value = (String)getAttributeInternal(CHECK);
String returnValue = null;
if ("Y".equals(value))
returnValue = "true";
else
returnValue = "false";
return returnValue;
public void setCheck(String value) {
//setAttributeInternal(CHECK, value);
String dbValue = null;
if ("true".equals(value))
dbValue = "Y";
else
dbValue = "N";
setAttributeInternal(CHECK, dbValue);
However as per best practice can I have a helper method to do the conversion. I use this checkbox code for around eighty checkboxes. What's the best practice.
Thanks

ADF Table with CheckBox - Select/deselect issue

I have seen couple of threads and blogs for ADF table with check box . but none of them exactly matching with my requirement . My Database table does not have any field for check box .
Here is my DB Table
tableA_
A_Id
A_Name
tableB*
B_Id
Requirements :*
1. Display the above tables data with Checkbox . ( if A_Id = B_Id then the checkbox will be checked , else unchecked ) .
2. Select / deselect the check box and save the data . Saving the data , will update only tableB . i,e when a new check box is selected then A_Id value will be inserted to tableB . Similarly , deselecting a checked in data will remove the entry from tableB.
Development :
1. Created a VO where tableB has marked as updateable .
2. Created a transient Boolean variable for checkBox . and modified the getter method of checkbox for returning true/false based on the below condition in the ViewRowImpl Class .
if ( A_Id = B_Id )
return true;
else false ;
3. I have not modified the setter method .
Using the above concept i can view the data with selected checkbox . but the problem is to save the data . because , when I select a checkbox the above coding in the getter method will return false .
Therefore , though i am selecting the checkbox but value of the checkbox has been set as false .
While saving the Data , I am iterating through the VOIterator and observed that a newly selected checkbox value is false . and realized its because of the getter method condition .
Can you please suggest how can I overcome this issue or shall I need to take any other approach ?
Jdev version 11.1.1.5
Regards,
Amitava
Edited by: Amitava on Mar 17, 2012 3:48 PM

You need to go through the ADF page life cycle concepts. In simple words the boolean value in the model is not set while in valueChangeListener. Try adding valueChangeEvent.getComponent().processUpdates(FacesContext.getCurrentInstance()); on top in your listener method and see the effect.
Reference:
http://docs.oracle.com/cd/E15051_01/web.1111/b31974/adf_lifecycle.htm

How to make row selection by checkbox in ADF table

hello,
using jdev11g TP4 , fusion web application
when i drag my view object as ADF table into jsf page,
i want to know how to make row selection by checkbox
thanks
greenApple
Edited by: greenApple on Nov 10, 2008 11:33 AM

Hi,
the tree component has changed compared to 10.1.3. You no longer have a tableSelectmany component that renders as checkboxes. Instead you use the ctrl key and select the table rows
Frank

Bug in ADF(10.1.3.2.0) with checkboxes in a table in a pop-up

So I've found a bug in ADF. The bug manifests when I have a dialog window pop-up with a table with many rows(13 or more). Each row has a checkbox in it. If I change the state of 12 or fewer of the checkboxes and click ok, the returnListener will fire. If I change 13 or more checkboxes, the return listener does not fire.
I'll try to create a test case/demo for this. Has anyone else encountered this?

Hi,
I haven't seen this problem, but I normally use a JSF HTML boolean checkbox for ADF editable tables.
<h:selectBooleanCheckbox value="#{row.Enabled}"/>I found that the <af:selectBooleanCheckbox> readonly attribute did not evaluate its EL so I stuck with the JSF component since. You could try this component as a workaround.
Brenden

ADF Shuttle Select Items rendered as checkboxes

So, we are using ADF 11.1.2.4 to develop our application. We have a requirement to use the shuttle control. However, when it is rendered, it contains checkboxes (inputItem type=checkbox). I am pretty sure this wasn't happening with 11.1.2.3, but was wondering if anyone else has seen this behaviour? I am thinking it may also be a CSS thing.
I've noticed in the rich client demo that it also uses an inputbox as a checkbox, but it has a style class associated with it. However, in our application, there is no style associated with it. Perhaps this is because our style hasn't inherited any of the Fusion skins? Thus, our items are rendered "naked". Another thing we have noticed is that nothing shows up on the right hand side of the control, but it used to with 11.1.2.3.
Any help would be greatly appreciated,
BradW

Ok, so it was a skinning issue. I reset the skin in the trinidad-config.xml file and violla! Checkboxes are gone. Now just to figure out what the issue is with the right hand side is doing. Separate question. Hope this helps someone.
BradW

Not able to get ADF select many checkbox working with binding lists

Hi,
I have 2binding lists: list A that holds the selected choices and list B for all the choices. When the user opens the page, a list of checkbox should be displayed all the choices from list B with the saved ones pre-checked from list A. When the user changes the selection, the binding list A should be updated.
I tried to use ADF select many checkbox but could not get it working for this.
There are 2 big issues:
1, can get all the choices from binding list B displayed but not able to pre-check the ones from list A.
2, when the selection changed, not able to updated list A with the new choices
I find some sample but it is talking about saving the selected choices into the managed bean not into binding object and using valueChangeListener. How to implement this in ADF? Please help.
Thanks,
Helen

Helen,
I don't think you can do this with a select many checkbox. This component works on one list whereas you want to handle two. You may archive this if you use a managed bean and handle all the list manipulation in java.
Your use case more looks like a select many shuffle (http://docs.oracle.com/cd/E18196_01/11.1.2.0.0/lovs.html).
Timo

BUG: CheckBox colum inside table (ADF 11.1.2.1)

I find a bug using CheckBox inside table, this are steps to get the bug.
1.Create a view object from database table.
2.Create a where clause in view Object
3.Create a parameter form (using where clause)
4.Create a editable table with filter enable
-- AFTER TEST, ALL WORK
5. Convert inputText to af:selectBooleanCheckbox
-- AFTER TEST GET THIS ERROR:
1- FIlter adf tabla and data is ok.
2- Apply a filter using parameter form and same time adf:table filter. (Data is not well.)
As I say this happend only when i change my inputText to af:selectBooleanCheckbox.
With inputText work well, with booleanCheacBox work bad..
Someone know if this was fix in 11.1.2.2 ??

My attribute is not boolean but I fix it in viewRowImplementation accesor:
public String getProgramada() {
        String dbValue= (String) getAttributeInternal(PROGRAMADA);
        if("S".equals(dbValue))
            retreturn "true";
        else
            return "false";
public void setProgramada(String value) {
        String valorSeleccionado = null;
        if("true".equals(value))
            valorSeleccionado = "S";
        else
            valorSeleccionado = "N";
        setAttributeInternal(PROGRAMADA, valorSeleccionado);
    }Seems that change was the problem.. this code work bat generate the BUG i post here.
SOLUTION:
1. Revert the viewRowImpl to default accesor.
2. Modify page definition in tis way using idea from Vinay Agarwal
<tree IterBinding="VSiriusCorreriasUsuView1Iterator" id="VSiriusCorreriasUsuView1">
      <nodeDefinition DefName="modelo.vistas.VSiriusCorreriasUsuView" Name="VSiriusCorreriasUsuView10">
        <AttrNames>
          <Item Value="Correria"/>
          <Item Value="Descripcion"/>
          <Item Value="Instleer"/>
          <Item Value="Descargadas"/>
          <Item Value="Ejecutadas"/>
          <Item Value="Codusuario"/>
          <Item Value="Codterminal"/>
          <Item Value="Placaveh"/>
          <Item Value="Fechaprog"/>
          <Item Value="Programada" Binds="Programada"/>
        </AttrNames>
      </nodeDefinition>
    </tree>
<button IterBinding="VSiriusCorreriasUsuView1Iterator" id="Programada" DTSupportsMRU="false" StaticList="true">
      <AttrNames>
        <Item Value="Programada"/>
      </AttrNames>
      <ValueList>
        <Item Value="S"/>
        <Item Value="N"/>
      </ValueList>
    </button>And everything Seems to work Well. Seems to be more easy than add code to accesors in viewRowImpl and work better.
My checkbox value is get from tree component:
<af:selectBooleanCheckbox value="#{row.bindings.Programada.inputValue}"
                                             shortDesc="#{bindings.VSiriusCorreriasUsuView1.hints.Programada.tooltip}"
                                             id="it7" label="#{bindings.Programada.label}" simple="true" autoSubmit="true">
</af:selectBooleanCheckbox>

Issu with multiselection using Checkbox in adf 11.1.1.7

Hi Experts,
in my application i m using table with pagination property and i also add multiselection using boolean check box , i created boolean transient variable in VO , and multiselection work fine but in one scenario its fail ,
Scenario is :-
suppose i check 3 row in table then i click next for pagination then i also check 2 row in table the i go back to first pagination where i have already check 3 values i uncheck 1 value and go next pagination where i check 2 values then i go back to first pagination (now problem is there) here i find 3 check rows that is problem here i must found 2 check rows .uncheck is not showing in scenario.
plz help.......................

Hi
if your VO is absed on entity add the transient attribute in EO and use that atribute in VO
if your VO is not based on EO ,then add one tarnsient attribute in EO use that attribute in VO.
I had this issue while implemnting checkbox selection adf table.My VO is not based on EO so i have used one Entity in which i have added one transient attribute .

ADF BC:Enable or Disable tableselectmany checkbox

Hai all
I'm developing a web application using Jdeveloper 10.1.3 and ADF BC.
In one of my pages,there is a adf table with tableselectmany which will be rendered as a
checkbox for each record in the table.
My requirement is to disable or enable this checkbox according to a value of a field in the
table.ie,If the value of a field is 'Y' it should be enabled and available
for selection,Otherwise not.
Is it possible to implement in ADF....
Please help me if anybody having a solution.....
Ans

The "value" attribute of a selectManyCheckbox will be bound to a List or an array. When the checkboxes are rendered, the values in the List or array will determine which checkboxes are initialized as checked. The selectItem components, or selectItems component inside the selectManyCheckbox gives you the list of checkboxes and the value of each. For instance, suppose my user can select from colors Red, Blue, and Green. I would have this:
<af:selectManyCheckbox value="#{myBackingBean.colors}" label="Colors">
<af:selectItem label="Red" value="red"/>
<af:selectItem label="Blue" value="blue"/>
<af:selectItem label="Green" value="green"/>
</af:selectManyCheckbox>In the backing bean named myBackingBean:
private String[] colors = {"blue"};
/* getter and setter for colors go here */The checkbox labeled "Blue" is initialized as checked, the other two checkboxes are unchecked. When the form is submitted, the array named "colors" will have the values of the checkboxes that were checked. So if the user unchecks "Blue" and checks "Red" and "Green" the new contents of colors is {"red","green"}.
If you are asking about disabling some of the select items, that is easily done. Just bind the "disabled" attribute of the selectItem to a boolean value that evaluates to true if you want the item so that the user can't set or unset the checkbox, or the "rendered" attribute to a boolean value that evaluates to false if you don't want the item shown at all.

ADF 11g + Select Boolean CheckBox becomes readonly

Hi All,
I have a view object, in which I added a transient attribute called as "InActive". And I added this VO as an ADF:Table on to the JSPX page.
1) My requirement is that if the other column called "EndDate" got any value ( any date value) then the "InActive" checkbox need to be autoselected.
And the users have the option of the de-selecting it.
2) The requirement is such a way that based on this "EndDate" column we are assuming that the current row/records is active or inactive in database.
So using this checkbox attribute, if the checkBox is selected for the row, then we are setting the "EndDate" column with "sysdate" and if they are unselecting any exisiting
checkbox, the same row will get updated with "EndDate" to null. Every thing is working fine for me with the code I have.
3) The road block I'm facing here is that I'm setting the attribute 'selected="#{row.EndDt != null ? true : false}" '. This is properly setting the checkbox "Inactive" values based on the "EndDate" column from the
database. But the entire check box column becomes read only, which does not allow me to edit.
4) If I set the value expression for the "Inactive" transient boolen attribute at the VO level, with the following as the value expression: 'EndDt != null ? true : false', if also sets the checkbox values properly, and moreover
the check box also editable, which is what we are expecting, but on submission of the page, the checkbox attribute is still pointing to the old/default value even though we change the value of the checkbox.
For example if the checkbox was got selected on load of the page, and if I unselects, and submits, it still shows that checkbox value as true.
So it would be greatly help ful to me if some one can provide me any hint on this.
Below is the code snippet I'm using for this in backing bean to process the logic.
int totalRows = this.t1.getRows();
ArrayList InactivatedrowIndexes = new ArrayList();
ArrayList ActivatedrowIndexes = new ArrayList();
for (int i = 0; i < totalRows; i++) {
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)this.t1.getRowData(i);
Boolean check = (Boolean)rowData.getRow().getAttribute("Inactive"); // Inactive is the transient boolean attribute in VO - which has the value expression as EndDt != null ? true : false
if (check == true) {
InactivatedrowIndexes.add(i);
if (check == false) {
ActivatedrowIndexes.add(i);
System.out.println("******The row indexes to inactivate are: " +InactivatedrowIndexes);
System.out.println("******The row indexes to activate are: " +ActivatedrowIndexes);
Thanks & Regards,
Dharmathej M

Hi All,
I have a view object, in which I added a transient attribute called as "InActive". And I added this VO as an ADF:Table on to the JSPX page.
1) My requirement is that if the other column called "EndDate" got any value ( any date value) then the "InActive" checkbox need to be autoselected.
And the users have the option of the de-selecting it.
2) The requirement is such a way that based on this "EndDate" column we are assuming that the current row/records is active or inactive in database.
So using this checkbox attribute, if the checkBox is selected for the row, then we are setting the "EndDate" column with "sysdate" and if they are unselecting any exisiting
checkbox, the same row will get updated with "EndDate" to null. Every thing is working fine for me with the code I have.
3) The road block I'm facing here is that I'm setting the attribute 'selected="#{row.EndDt != null ? true : false}" '. This is properly setting the checkbox "Inactive" values based on the "EndDate" column from the
database. But the entire check box column becomes read only, which does not allow me to edit.
4) If I set the value expression for the "Inactive" transient boolen attribute at the VO level, with the following as the value expression: 'EndDt != null ? true : false', if also sets the checkbox values properly, and moreover
the check box also editable, which is what we are expecting, but on submission of the page, the checkbox attribute is still pointing to the old/default value even though we change the value of the checkbox.
For example if the checkbox was got selected on load of the page, and if I unselects, and submits, it still shows that checkbox value as true.
So it would be greatly help ful to me if some one can provide me any hint on this.
Below is the code snippet I'm using for this in backing bean to process the logic.
int totalRows = this.t1.getRows();
ArrayList InactivatedrowIndexes = new ArrayList();
ArrayList ActivatedrowIndexes = new ArrayList();
for (int i = 0; i < totalRows; i++) {
JUCtrlHierNodeBinding rowData =
(JUCtrlHierNodeBinding)this.t1.getRowData(i);
Boolean check = (Boolean)rowData.getRow().getAttribute("Inactive"); // Inactive is the transient boolean attribute in VO - which has the value expression as EndDt != null ? true : false
if (check == true) {
InactivatedrowIndexes.add(i);
if (check == false) {
ActivatedrowIndexes.add(i);
System.out.println("******The row indexes to inactivate are: " +InactivatedrowIndexes);
System.out.println("******The row indexes to activate are: " +ActivatedrowIndexes);
Thanks & Regards,
Dharmathej M

Adf checkbox

Similar Messages

Maybe you are looking for