ADF Warning Messages

While testing my UIX application in JDev 10.1.2, I see many, many warning messages like:
05/04/21 07:40:40 [400] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 [401] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 Rendering page = Page[name=simpleSearch]
05/04/21 07:40:40 [402] **** refreshControl() for BindingContainer :searchUIModel
05/04/21 07:40:40 [403] Warning! Using introspection to lookup and return value for :rowIterator
05/04/21 07:40:40 [404] Warning! Using introspection to lookup and return value for :rowIterator
05/04/21 07:40:40 [405] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [406] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [407] Warning! Using introspection to lookup and return value for :DCIteratorBinding
repeated messages deleted
05/04/21 07:40:40 [432] Warning! Using introspection to lookup and return value for :DCIteratorBinding
05/04/21 07:40:40 [433] Application Module failover is enabled
05/04/21 07:40:40 [434] Getting a connection for internal use...
Does anyone have any idea where these might be coming from? The pages work fine, but it would be nice to know what problem they are attempting to notify me of.
If nothing else, I'd like to turn them off. They are currently almost 1/3 of the messages in the log.

Submitted as TAR 4410468.995

Similar Messages

When throwing Warning Message from EOImpl, Text, Cause and Action is coming

Hi,
When I am throwing JBO Exception through EOImpl code, I am getting warning message with Text, Cause and Action, But my aim is to get only Text message.
/* Code used */
JboException e = new ApplcoreException("Message Code");
e.setSeverity(JboWarning.SEVERITY_WARNING);
throw e;
/*end*/
Please suggest some approach.
Thanks
Ankur

Applcore is not availble to the Outside world , so better to post this on the internal ADF Frontend forum.
I suspect there might be another API to do this .

JDev 11g ADF - WARNING: Transient state added to StateManager.

Can anyone help me to find why I am getting next warning message when running the ADF application which shows the graph from the view object VRequestRepairForOneWeekRO.
View is created as Read-only access through SQL query. Query has many UNIONS and GROUP BY.... Graph is inside task flow on the page region. Everything runs OK.
14-Jan-2009 5:19:26 PM oracle.adf.share.http.HttpSessionStateManagerImpl putState
WARNING: Transient state added to StateManager. State may not be serialized. State id: data.com_pk_view_requestRepairHoursGraphPageDef.VRequestRepairForOneWeekRO1__cubicDefinition
Thanks.

More info:
I found that this warning comes when data from the View are represented by the graph (line, bar, pie…).
I tried to show the same data in the table and there were no warning.
It does not matter if the view is based on entity or created by the query.
It is not related to regions or the task flow. The same warning comes when single jspx with one graph is used.
Any Help? Is this Oracle BUG or am I doing something wrong?

Show warning message in ApplicationModuleImpl

Hi,
I'm using jdeveloper 11.1.2.3.0
I'm trying to show a warning message in ApplicationModuleImpl.
using this code:
JboWarning warning = new JboWarning("'some warning");
getDBTransaction().addWarning(warning);
It failed as exception in weblogic.
What is the correct way to show the warning?
Thanks!

Hi,
you actually attempt adding a warning to a transaction. What you should do is to throw an instance of JboException (e.g. create your custom exception class that extends JboException). When you access the AM through the binding layer then this exception is handled and thus displayed by the ADF error handler
See also: JboException (Oracle Fusion Middleware Java API Reference for Oracle ADF Model)
Frank

I am getting a warning message when i am trying to create a host-named sitecollection.

Hi guys,
I am trying to create a host-named site collection. I have created the root site collection. After that i have tried to create customer root site. I have doing this process with the guidance of this link.
http://technet.microsoft.com/en-us/library/cc424952.aspx#section2a
When i tried to create a customer root site. I am getting a warning message
" WARNING: The port specified for the new host header site does not match any known bindings in the specified Web
Application. The new site will not be accessible if the Web Application is not extended to an IIS Web Site serving
this port."
I couldn't when this warning message comes. I tried to bind the server with webapplication which is created for host-named site collection. No use.
Can anyone help me to solve. And i wanna know why this error message comes!!!
Thanks in advance
Rajendran.

First, you shouldn't create a host named site collection on a Web app that has host header named. Doing that implements host names at two different levels and will not work reliably. Second I'm not sure what you mean when you say you didn't
use the FQDN but used just the domain name. A Full url will always be either an FQDN or a shorter Netbios name. If you use a Netbios name it simply assumes the local AD domain of the workstation to create an FQDN as the url There is no way
to use just the domain name. For example, Contoso.com is the domain name. Server.contoso.com or WEbsite.contoso.com are FQDNs. YOu can also use a shorter version that is just server or website, but when those resolve in TCP/IP they would
still resolve using server.contoso.com or website.contoso.com if the workstation where your browser is was in the contoso.com domain. What is the URL for your root site and your host named site?
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Warning message in ALV report

Hi Experts,
In ALV report i am getting warning like
" Field string LS_HEADER is not referenced statically"
Actually i declared this field as "DATA: ls_header TYPE slis_listheader.".
How to correct this warning message.
Thanks in advance.
Thanks,
Madhu.

Dear Madhu,
You are not using LS_HEADER statically that you have defined in the program. You will get a warning message since you have defined a field that you have not referenced statically.
Are you using this field dynamically? You can delete/comment the code if you are not using it statically and dynamically.
Moved the thread ABAP forum. Post your queries in relevant forums to get efficient answers.
Regards,
Naveen

Warning message in BW Report through Portal

Friends,
I really need your help to remove the waring message.
For the purpose of changing the description on the Selection screen from Cost Cetnters (Authorised Values) to Funds Centers I had changed the ZCCTRATI variable description to Funds Centers
Issue:
When we open the old report we see the following information message.
" Value if variable ZCCTRAT1 is automatically converted
I did go to TC RSRT as of Dinesh,Vijay advice ,Just want to know that what message i need to Click .because i could nt find the relevant message
Can u help me how to remove this ?

Hi Manohar,
Edit to add: Here I assume you have a Web Application Designer (WAD) report.
You can suppress system and warning messages in WAD. Try this and see if it helps.
- Go to your WAD report
- In the top part of the properties window there is a drop down box. Open this box and select the top level entry there. This should be the name of your report.
- Click Web Item
- Check the following two checkboxes: "Do not Display System Messages" and "Do not Display Warnings".
Hope this helps,
Regards,
Petter
Message was edited by: M Petter

Error message into warning message KO450

Hi,
There are unsettle RA value in project PAD-9114. Because of this unsettle RA value in the project we are not able to close the project and receiving error message like below:
1.There is still WIP for wbs
2.Balance of wbs is not zero.
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
How to change above error message into warning message so that it will allow us to close the project.
With regards,
V.krishnamoorthy

Hi,
Thanks for your answer. But still i am receiving the same error
There is still WIP for WBS PAD-9114
Message no. KO450
Diagnosis
The WIP for WBS PAD-9114 has not been cleared.
System Response
WBS PAD-9114 cannot be deleted.
Procedure
Calculate the WIP for WBS PAD-9114 so that it can be cleared. Then settle WBS PAD-9114, including the cleared WIP in the settlement.
With regards,
V.krishnamoorthy

Standard warning messages in Vendor Request Form

Hi All,
Please let us know, how are the standard warning messages in Vendor Request Form while creation/search are displayed.
For example, I am getting an soft warning message text, at vendor creation which says "Some of the records were not found; for more information, check the log".
Here we don't have any log traces to be checked for, and we have verified the back end record resultset count which is same, irrelevant of the warning message being shown.
These messages are displayed only at two places:
1) The search navigation page, where all the searched record results are displayed and we continue further for creation of vendor workflow.
2) When the workflow of vendor creation is completed, along with the "Workflow has been completed" success message, this warning message is also shown.
I want to know, from where these messages are being populated and how to suppress these messages.
Kindly suggest.
Thanks in advance!
Message was edited by: Oxana Noa Zubarev

Hi All,
Attaching the screen shot for refernce:
After we click on "continue with create/edit" button, after few details have been entered, the work flow completes.
There are we are getting these error message as highlighted above.
Let me know if any info from my end would help in getting the root cause.
Thanks in advance.

I downloaded Firefox 4.0 onto my Mac but when I try to open it I get a warning message saying "The following disk images couldn't be opened" What do I do now?

While running Firefox, I got a prompt saying their was an update. I did that, but then got another message saying that it was recommended I update firefox to 4.0. I downloaded it, but never received a prompt to drag the image into my applications folder. I also never saw an image of firefox 4.0 on my desktop. Firefox 4.0 was in my downloads folder but got the above warning message when I clicked on it. I tried downloading it again, but the same thing happened. Now what? It appears that Firefox is still running, although I haven't yet tried to go to another website.

Try:
*http://thexlab.com/faqs/resetlaunchservices.html
* http://guides.macrumors.com/Repairing_Permissions

Removing warning messages - PTMW

Hi,
I must to restrict the message apperance for transaction PTMW. In PTMW, when managers click on Goto -> Process Process Messages, they should see only the error messages. I tried to use badi PT_BLP_USER, but without success. Can you tell me how I can do this requirement ?
Thanks

The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

Removing std warning message in SRM 7.1

HI,
We are on SRM 7.1 ECS.
Whenever account assignment category is changed before ordering a cart,a std warning message is displayed "Enter a value in the mandatory field in account assignment" which is very annoying.Is there any way this message can be stopped to be displayed in the SC screen?
Pls advise.
Thanks in advance.

Thanks Ricardo.
We are on SP SAPK-70105 for SRM SERVER 701 .I dont undsratnd how this correction came in to our system.
I'm assuming the corrections of note 1607395 are in the system and hence this message.How do I avoid this message?I tried adding it to table BBPV_PDMSG but that didnt help.
Pls help.

Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

FV50-Park a G/L Account Document BDC Warning message in screen 1001

I need some help with a BDC program. I am working on a BDC program to process transaction FV50. I went to SHDB and created a recording macro. When I test the recording with u201Csimpleu201D information the recording works correctly and the document is parked. But, when I try to park a document with todays date for the Document Date and I use a date from a previous period I get a warning message which requires an extra screen to be displayed and u201Centeru201D has to pressed. My recording does not work when I get a warning message. I went back and re-recorded transaction FV50 and cause the u201Cwarningu201D message to be displayed so that I can add the extra screen to my BDC recording. I do not see the u201Cextrau201D screen in the new BDC recording. Anyone know why? How can I make this BDC program handle this extra warning message?

You will have to add some logic to your program to check the date. If it is from the previous period, process the warning screen; otherwise, do not.
You may run into other problems as well. FV50 looks like an EnjoySAP transaction and not well suited to batch input.
Rob

How to remove the 'New Entry' button in the warning message for a dialog bo

Hi Experts,
I am calling a Modal Dialog box screen having a pushbutton.
On the click of the pushbutton, I am performing some checks, and giving a warning message.
The warning message comes as a popup in this case and has three buttons on it.
One of these buttons is titled 'New entry'.
I dont want that button to come on the warning popup.
Please let me know if there is a way out for this.
Thanks in advance.
Useful answers will surely be rewarded.
Regards,
Himanshu

Hi Jyothi,
Thanks a lot for ur prompt reply.
But, in my dialog screen, on click of the button I am simply using the statement :
MESSAGE W000(0K) with 'text'.
The resulting warning message comes as a popup with the 'New Entry' button on it.
From the warning popup, how can I remove the button.
Please let me know.
Thanks.
Regards,
Himanshu

ADF Warning Messages

Similar Messages

Maybe you are looking for