Admin Server satrtup failing with the error User weblogic is not permitted to boot the server
Hi ,
The admin server is not coming up , its failing with the below error.
<May 25, 2014 10:28:35 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace.
I have tried resetting the password as per below link , it hasn't helped. Still facing issue. Please help
http://www.weblogic-tips.com/wls-security/
Thanks,
Pradeep
Creating New user did not help . Still same error.
<May 26, 2014 8:56:31 PM PDT> <Critical> <Security> <BEA-090404> <User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
<May 26, 2014 8:56:31 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogicNew is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:1010)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<May 26, 2014 8:56:31 PM PDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>"
Similar Messages
-
User weblogic is not permitted to boot the server
Hi,
I am new to OES and after running the configtool, creating the ASIAuthorizationProvider and ASIRoleMapperProvider (both has Defaul Identity Directory: wls_dir and Application Deployment Parent: //app/policy/wls_app), binding the SSM, i get this error when starting the WLS admin server:
15:33:26.312 EVENT Starting Jetty/4.2.25
15:33:26.859 WARN!! Delete existing temp dir C:\BEA_HOME_10\ales32-ssm\wls-ssm\i
nstance\wls_ssm\work\jar_temp\Jetty__8000__ for WebApplicationContext[/,jar:file
:/C:/BEA_HOME_10/ales32-ssm/wls-ssm/webapp/arme.war!/]
15:33:30.515 EVENT Started WebApplicationContext[,ARMEService]
15:33:32.562 EVENT Started SocketListener on 0.0.0.0:8000
15:33:32.562 EVENT Started org.mortbay.jetty.Server@176bf9e
ARME is started now
<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <BEA-090082> <Security initiali
zing using security realm wls.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <BEA-090404> <User weblogic i
s not permitted to boot the server; The server policy may have changed in such a
way that the user is no longer able to boot the server.Reboot the server with t
he administrative user account or contact the system administrator to update the
server policy definitions.>
<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <BEA-000386> <Server su
bsystem failed. Reason: weblogic.security.SecurityInitializationException: User
weblogic is not permitted to boot the server; The server policy may have changed
in such a way that the user is no longer able to boot the server.Reboot the ser
ver with the administrative user account or contact the system administrator to
update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitte
d to boot the server; The server policy may have changed in such a way that the
user is no longer able to boot the server.Reboot the server with the administrat
ive user account or contact the system administrator to update the server policy
definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown S
ource)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FAILED>
<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <BEA-000383> <A critical s
ervice failed. The server will shut itself down>
<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <BEA-000365> <Server stat
e changed to FORCE_SHUTTING_DOWN>
Stopping PointBase server...
PointBase server stopped.
from the WLS AdminServer.log:
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000436> <Allocating 3 reader threads.>
####<Mar 5, 2010 3:33:05 PM SGT> <Info> <Socket> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774385687> <BEA-000446> <Native IO Enabled.>
####<Mar 5, 2010 3:33:06 PM SGT> <Info> <IIOP> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774386531> <BEA-002014> <IIOP subsystem enabled.>
####<Mar 5, 2010 3:33:11 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774391656> <BEA-000000> <Starting OpenJPA 1.0.0.1>
####<Mar 5, 2010 3:33:17 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774397171> <BEA-090516> <The Authenticator provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413421> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413500> <BEA-090663> <The DeployableRoleMapper "com.bea.security.providers.authorization.asi.RoleProviderStub" implements the deprecated DeployableRoleProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413531> <BEA-090662> <The DeployableAuthorizer "com.bea.security.providers.authorization.asi.AuthorizationProviderStub" implements the deprecated DeployableAuthorizationProvider interface.>
####<Mar 5, 2010 3:33:33 PM SGT> <Info> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server AdminServer for security realm wls.>
####<Mar 5, 2010 3:33:33 PM SGT> <Notice> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774413796> <BEA-090082> <Security initializing using security realm wls.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <Security> <SGBLM010> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1267774414234> <BEA-090404> <User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.>
####<Mar 5, 2010 3:33:34 PM SGT> <Critical> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414234> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
weblogic.security.SecurityInitializationException: User weblogic is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(Unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(Unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize(Unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FAILED>
####<Mar 5, 2010 3:33:34 PM SGT> <Error> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Mar 5, 2010 3:33:34 PM SGT> <Notice> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414328> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Mar 5, 2010 3:33:34 PM SGT> <Info> <WebLogicServer> <SGBLM010> <AdminServer> <main> <<WLS Kernel>> <> <> <1267774414359> <BEA-000236> <Stopping execute threads.>
also, i just noticed that when staring OES admin server i get the following from the logs:
system_console.log:
2010-03-05 15:19:04,218 [JettySSLListener1-1] ERROR com.wles.soap.BLM.BlmBindingImpl - getUndistributedAttributeChanges has not been implemented properly.
2010-03-05 15:27:17,656 [Thread-31] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme group '//bind/wls' error report, policyno = 52:
2010-03-05 15:27:17,687 [Thread-31] ERROR com.bea.security.pdws.ARMEGroup - arme 'asi.null.ARME.wls_ssm.asi.SGBLM010':
2010-03-05 15:27:33,015 [Thread-32] WARN com.bea.security.ssl.axis.AxisClientSocketFactory - Error during SSL handshake; host: SGBLM010, port: 8,000.
2010-03-05 15:27:33,015 [Thread-32] ERROR com.bea.security.pdws.Distributor - unable to bind unbound arme
Communication Error:; nested exception is:
javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
WLESWebLogic.wrapper.log:
INFO | jvm 1 | 2010/03/05 15:27:17 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:17 | Re-throwing the fault...
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: Client has closed the connection, error not reported to client.
INFO | jvm 1 | 2010/03/05 15:27:18 | error.jsp: The exception is: com.bea.wles.management.console.utils.NestedJspException: Connection reset by peer: socket write error
INFO | jvm 1 | 2010/03/05 15:27:33 | Processing AxisFault, cause: javax.net.ssl.SSLHandshakeException: Error during SSL handshake; host: SGBLM010, port: 8,000.
INFO | jvm 1 | 2010/03/05 15:27:33 | Re-throwing the fault...
although, it seems that the OES admin server is up since i am able to access the OES admin console.
i have tried playing around the policies to grant the "weblogic" the priviliges for an Admin but is still get the same issue. Although, when i try to distribute the changes in the policy, "ASI ( Policy for entire Oracle Entitlements Server system ) " still appears in the list of changes.
any thoughts on what the problem is? is there a way to force the distribution of the policy? maybe through the command prompt or other console?
Edited by: user9056644 on Mar 5, 2010 12:02 AMHave you applied CP2 or CP3 to OES? There were enhancements that allows these policies to be scoped within an organization. I only ask to help guide you on distributing policies for the runtime WLS domain. The ASI domain is only for the admin. There should have been a set of resources and policies created as a result of running ConfigTool for your new instance (looks like you named it 'wls'). If no CP, it will be in DefaultApp next to ASI.
You have to distribute policies for 'wls' immediately following running ConfigTool before starting WebLogic or you will put it into a state where it can't be started. The corrective action is to remove the state.ck file under C:\BEA_HOME_10/ales32-ssm/wls-ssm/instance/wls_ssm/work/runtime, distribute policies, restart WebLogic.
If you need to re-run ConfigTool (after installing CP for instance), revert the following files:
<domain>/config/config.xml
<domain>/bin/startWebLogic.sh | .cmd
Revert from the no-ales backups created. Remove the instance folder under C:\BEA_HOME_10\ales32-ssm/wls-ssm/instance. You can then re-run ConfigTool if you have to. -
Hi,<BR>While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". <BR>Pls advice us that what is this error and how to resolve this.<BR><BR>And Which log is to be referred for the details.<BR><BR>Thanks<BR>Ravi
If a form is invalid it generally means that one of the dimension references is missing.<BR><BR>Can you get in to edit the form?<BR>If you can, see if you can preview it. I suspect you will not be able to.<BR><BR>If not, check all dimension boxes have at least one member against them.<BR>If you have multiple rows and/or columns check all of them too.<BR><BR>I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it.<BR><BR>Hope this helps.<BR>
-
The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '2013-07-09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event> -
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
SCOM Linux discovery failed with "The user name or password is incorrect" error
Hi every one .
In our test environment when I want to discover a new linux computer system , discovery process fails with this error message :
Unexpected DiscoveryResult.ErrorData type. Please file bug report.
ErrorData: Microsoft.SystemCenter.CrossPlatform.ClientLibrary.Common.SDKAbstraction.TaskInvocationException
Task invocation failed with error code 1326. Error message was: The user name or password is incorrect.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.SystemCenter.CrossPlatform.ClientActions.DefaultDiscovery.InvokeWorkflow(IManagedObject managementActionPoint, DiscoveryTargetEndpoint criteria, IInstallableAgents installableAgents)
But I m sure that this username and password is correct and I can logon to this computer with this credential.
how do I find root cause of this issue ?I have been enabled logging before doscovery process .
in temp directory :
0: 02/10/15 20:03:22 : Enter SCXNameResolverProbe constructor
0: 02/10/15 20:03:22 : Leave SCXNameResolverProbe constructor
1: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoInit
1: 02/10/15 20:03:22 : XML_INIT_CALL
1: 02/10/15 20:03:22 : Check WSAStartup
1: 02/10/15 20:03:22 : Exit SCXNameResolverProbe::DoInit
2: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::DoProcess()
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess passed initial arguments checking
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess input: 192.168.7.62
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess - Input is an IP-address
3: 02/10/15 20:03:22 : Enter SCXNameResolverProbe::GetName(): 192.168.7.62
3: 02/10/15 20:03:22 : Resolve IPv4 address to host name
3: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::GetName(): SUSE11
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns name: SUSE11
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns ip: 192.168.7.62
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errorcode: 0
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns errortext:
2: 02/10/15 20:03:22 : SCXNameResolverProbe::DoProcess returns xml: <NetworkName>SUSE11</NetworkName><IPAddress>192.168.7.62</IPAddress><StatusCode>0</StatusCode><StatusMessage></StatusMessage>
2: 02/10/15 20:03:22 : Enter initDataHolder
2: 02/10/15 20:03:22 : Enter initDataType
2: 02/10/15 20:03:22 : initDataType initializing output datatype
2: 02/10/15 20:03:22 : Leave initDataType
2: 02/10/15 20:03:22 : Leave initDataHolder
2: 02/10/15 20:03:22 : Leave SCXNameResolverProbe::DoProcess
4: 02/10/15 20:03:22 : Enter SCXNameResolverProbe destructor
4: 02/10/15 20:03:22 : SCXNameResolverProbe destructor - FreeLibrary failed: 0
4: 02/10/15 20:03:22 : Leave SCXNameResolverProbe destructor
with debug viewer I have this message after discovery :
[7448] A management object with display name SUSE11 could not be found. -
Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28 Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29 Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0x00000004 Source: Checking Alcon Files Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0xC0024107
Source: Checking Alcon Files Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advanceAre you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all. -
SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6
This is not a REMOTE Exchange 2010 server, I'm launching it from the SBS2011 Console with the Domain Admin.
It looks like a permissions error, because when I use "RUN AS ADMINISTRATOR" on the exchange management tool, it launches with no errors and no issues...
I searched and I couldn't find anything that fits this exact error.
Thanks
RussHi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B
Hello
I am using the EnableBitlocker.vbs script to automatically assign the TPM and start the encryption. I am running it from an elevated command prompt. Here is are the arguments I am running with
cscript EnableBitLocker.vbs /on:tp
/l:c:\bitlockerlog.log /promptuser /ro:"MBAM" on
All is well and it prompts the user for a PIN but then it fails.
Here is the full log file. I haven't been able to find any info on the error code in the subject.
Script processing started 02/07/2014 14:43:27
Proper number of command line arguments passed to the script
---------------Executing with the following arguments------------------
Enable parameters: tp
Logging location: c:\bitlockerlog.log
Create recovery key: No recovery key use specified
Encryption method: 3
Create SMS status MIF's: No SMS status MIF's will be created
Reset TPM ownership: 1
User prompting: 1
Connection succeeded to MicrosoftTPM
Successfully retrieved a TPM instance from the Win32_TPM provider class
TPM found in the following state:
Enabled - True
Activated - True
Owned - True
Connection succeeded to MicrosoftVolumeEncryption
TPM is in a ready state to enable BitLocker.
Change TPM owner password specified on the command line.
Random TPM owner password is: ;&K:)BU65|c7_v2n
Completed converting old owner password to owner authorization: 0
Completed converting owner password to owner authorization: 0
Starting to change owner authorization process on the TPM
ERROR - Failed to change owner authorization on the TPM with the following exit code: 80280001
Successfully connected to WMI StdRegProv
Checking if Group Policy encryption method is set...
Found EncryptionMethod with value: 4
Found EncryptionMethod policy registry key ignoring any /em options on command line
Found ActiveDirectoryBackup with value: 1
Found RequireActiveDirectoryBackup with value: 1
Determined client Group Policy configured to require AD escrow of recovery password
EncryptableVolumes count is: 1
The EncryptableVolume(s) found: \\?\Volume{ad6db324-01dd-11e4-8272-806e6f6e6963}\
EncryptableVolume used for encryption is: C:
The volume has a protection status of: 0
BitLocker Protection is Off
Get conversion status is: 0
The volume has a status of fully decrypted
The following user is logged on: MGMT\80151318-sys
Attempting to enable BitLocker TPM + Pin
ERROR - the ProtectKeyWithTPMAndPIN Method failed with the exit code: 8031005B
Script ended 02/07/2014 14:43:51
Any and all help would be appreciated. This has worked before on a different laptop.
ThanksHi,
This error indicates that the group policy isn't set correctly, when configure the group policy at teh server side, you should notice that only one of the additional authentication can be required at start up , otherwise a policy occurs, the notice can be
found just like below:
and after test, the error indeed occurs, just like the screen below:
So, I suggest to check the group policy for bitlocker settings, you can only choose one start up authentication method.
Regards
Wade Liu
TechNet Community Support -
My SSIS package loads data from access database to SQL Server database.
It's a straight copy. It fails with the below warnings and error message as shown below:
Error messages:
[OLE DB Source [113]] Error: There was an error with OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID] on OLE DB Source.Outputs[OLE DB Source Output]. The column status returned was: "Text was truncated or one or more characters had no
match in the target code page.".
[OLE DB Source [113]] Error: The "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]" failed because truncation occurred, and the truncation row disposition on "OLE DB Source.Outputs[OLE DB Source Output].Columns[RetentionID]"
specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are 3 warning messages even before I run the package. Warnings are all about the mismatch between the source and destination column sizes.
I cross checked the source and destination column sizes. The destination column sizes are fairly high than the source column sizes.
It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Thank you.It worked well all the while and when we are going to pre-prod it is throwing errors. Any help is highly appreciated.
Please check if the dev destination table has same column data types and size as compared with pre prod table
Thanks, hsbal -
I am installing a new reporting server.
When running a report I get the above error:
Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308)
Any ideas?Have a look here for Oracle's guidelines on troubleshooting such errors:
http://download.oracle.com/docs/cd/E14004_01/books/Reports/ReportsTroubleshoot.html -
I'm in the process of trying to convert an existing gen1 VM (Win Server 2012 R2) to a VM template using VMM 2012 R2 with rollup 1. The creation keeps failing with the following error :-
"Error
(2901)The operation did not complete successfully because of a parameter or call sequence
that is not valid.Recommended ActionEnsure
that the parameters are valid, and then try the operation again."
I've checked that the local administrator account for the machine being converted to a template and it is blank as expected and in an attempt to troubleshoot I've output the template creation script via the VMM GUI and executed the commands in order which appears
to have resolved the problem, well the template finishes creation, i'm yet to deploy a machine via it?
# Create VM Template Wizard Script
# Script generated on Thursday, April 3, 2014 12:52:15 PM by Virtual Machine Manager
# For additional help on cmdlet usage, type get-help <cmdlet name>
$VM = Get-SCVirtualMachine -VMMServer localhost -Name "MyTemplate_Template" -ID "98299447-83e1-4d98-a558-a96ebafcf9b5"
| where {$_.VMHost.Name -eq "myhost.mydomain.com"}
$LibraryServer = Get-SCLibraryServer -VMMServer localhost | where {$_.Name -eq "my.library.com"}
$GuestOSProfile = Get-SCGuestOSProfile -VMMServer localhost | where {$_.Name -eq "Windows Server 2012
R2"}
$OperatingSystem = Get-SCOperatingSystem -VMMServer localhost -ID "50b66974-c64a-4a06-b05a-7e6610c579a2"
| where {$_.Name -eq "Windows Server 2012 R2 Standard"}
$template = New-SCVMTemplate -Name "My Template" -RunAsynchronously -VM $VM -LibraryServer $LibraryServer
-SharePath "\\mylibrary.mydomain.com\SCVMM Library\Templates\mytemplatedestination" -GuestOSProfile $GuestOSProfile -JobGroup d2f2f539-85da-4091-ab08-abe739fc4761 -ComputerName "*" -TimeZone 85 -FullName "Administrator"
-OrganizationName "My Organisation" -Workgroup "WORKGROUP" -AnswerFile $null -OperatingSystem $OperatingSystem
Now the only fields that weren't populated when I ran through the gui were FullName and Organization? Before I changed the script these two fields were just set to ""? Is that what has potentially caused the issue are they both required fields?Your not the only one who can reproduce this. Did you ever find out what it was? I saw your post and tried your same work-around and it also worked for me via Powershell.
-
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Hi
DECLARE @XMLA nvarchar(3000)
, @DateSerial nvarchar(35);
-- Change date to format YYYYMMDDHHMMSS
SET @DateSerial = CAST(GETDATE() AS DATE);
--SELECT @DateSerial
Set @XMLA =
N' <Batch xmlns="http://schemas.microsoft.com/analysis services/2003/engine">
<ErrorConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2"
xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2" xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200"
xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200">
<KeyErrorLimit>-1</KeyErrorLimit>
<KeyNotFound>IgnoreError</KeyNotFound>
<NullKeyNotAllowed>IgnoreError</NullKeyNotAllowed>
</ErrorConfiguration>
<Parallel>
<Process xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ddl2="http://schemas.microsoft.com/analysisservices/2003/engine/2" xmlns:ddl2_2="http://schemas.microsoft.com/analysisservices/2003/engine/2/2"
xmlns:ddl100_100="http://schemas.microsoft.com/analysisservices/2008/engine/100/100" xmlns:ddl200="http://schemas.microsoft.com/analysisservices/2010/engine/200" xmlns:ddl200_200="http://schemas.microsoft.com/analysisservices/2010/engine/200/200"
xmlns:ddl300="http://schemas.microsoft.com/analysisservices/2011/engine/300" xmlns:ddl300_300="http://schemas.microsoft.com/analysisservices/2011/engine/300/300">
<Object>
<DatabaseID>MultidimensionalProject5</DatabaseID>
<CubeID>giri</CubeID>
<MeasureGroupID>Fact Internet Sales</MeasureGroupID>
</Object>
<Type>ProcessFull</Type>
<WriteBackTableCreation>UseExisting</WriteBackTableCreation>
</Process>
</Parallel>
</Batch>';
EXEC (@XMLA) At SHALL-PCAdventureWorksDw ;
iam executive the query when iam getting below error.
[Execute SQL Task] Error: Executing the query "DECLARE
@XMLA nvarchar(3000)
, @DateSerial nvarch..." failed with the following error: "Incorrect syntax near '-'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set
correctly, or connection not established correctly.
how to solve this error;
please help meWhat are you trying to do? What sort of data source is SHALL-PCAdventureWorksDw?
When you use EXEC() AT, I would execpt to see an SQL string to be passed to EXEC(), but you are passing an XML string????
If you explain why you think this would work in the first place, maybe we can help you.
Erland Sommarskog, SQL Server MVP, [email protected]
Maybe you are looking for
-
How do I return my menu bar to the original color?
Awhile back I changed my menu bar to black. I can't recall if it was something I installed or if it was something else. I uninstalled all apps that have anything to do with tinkering and I restarted my computer but my menu bar is still black. Any ide
-
Copy Control for splitting items
Here is my situation... a single delivery will contain multiple truckloads. The business process cannot avoid that, and transaction VLSP (subsequent delivery split) is not an option to avoid that. However, we must split the Pro Forma invoices out
-
I am using Adobe Reader 11. I am having a problem with searching PDF documents. In the past the search results were highlighted in yellow. Now I occasionally get a large blue box on the left side of the document that covers several lines and it is ve
-
Numbers 09 spreadsheet will not open in Numbers 08. Message suggests new version of Numbers is needed. Why?
-
If you delete this folder it will no longer be shared
Hello to all and Happy New Year. I'm not sharing a folder in my PC which has FS9 when I go to Properties > Sharing. Every time I delete a folder withing FS9 I get this message. Any hint?