Adobe connect does not assign me as a host. What to do?

The manual says that (when starting up a meeting in Adobe Connect) Adobe will assign me as a host automacally.
With me this doesn't work.
I just got my license yesterday, doe I have to change something in 'settings' of?
What to do?
Thank you for helping me!

Hi KylieSabra,
Did you acquire your extensions from Adobe Exchange? If yes, when the extension is to be installed, Extension Manager will check if the current user has purchased this extension( for paid extensions ). Then Adobe Application Manager might pop up to let the user input his accout --- adobe id, which is what you got.
Thanks,
Xiaoyi

Similar Messages

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

Adobe connect does not show in microsoft office word 2007

I have adobe acrobat 8 professional and office 2007
the adobe tab in word has disapeared, i can not convert documents to PDF no more.
but it works in excel and outlook.
what do i do ??!!!

Try this (sorry for some translations, I'm not using an English version myself):
Open the Microsoft menu (round button top left)
Click on Options for Word
Choose Add-ins (not sure of this term)
Select the Acrobat PDFmaker Office add-in
At the bottom click on Start (not sure of term) next to Manage ...
Be sure to activate the Acrobat Add-in (it should load when starting) and confirm
Lilybiri

Adobe Connect does not start

produces an error:
012/08/23 09:56:32 | STATUS | wrapper | --> Wrapper Started as Service
2012/08/23 09:56:32 | STATUS | wrapper | Java Service Wrapper Standard
Edition 64-bit 3.3.9
2012/08/23 09:56:32 | STATUS | wrapper | Copyright 1999-2009 Tanuki
Software, Ltd. All Rights Reserved.
2012/08/23 09:56:32 | STATUS | wrapper | http://wrapper.tanukisoftware.org
2012/08/23 09:56:32 | STATUS | wrapper |
2012/08/23 09:56:32 | ERROR | wrapper | License Error:
2012/08/23 09:56:32 | ERROR | wrapper | The license keys are incorrect.
2012/08/23 09:56:32 | ERROR | wrapper | Please verify that the
wrapper.license.* properties match exactly
2012/08/23 09:56:32 | ERROR | wrapper | and that the following property
values match those required for the license:
2012/08/23 09:56:32 | ERROR | wrapper |
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp
2012/08/23 09:56:32 | ERROR | wrapper |
wrapper.app.parameter.1=com.antepo.accept.launcher.Main
2012/08/23 09:56:32 | ERROR | wrapper |
2012/08/23 09:56:32 | ERROR | wrapper | A license can be obtained from
the Java Service Wrapper site:
2012/08/23 09:56:32 | ERROR | wrapper |
http://wrapper.tanukisoftware.org/doc/english/purchase.html
2012/08/23 09:56:32 | ERROR | wrapper |
2012/08/23 09:56:32 | ERROR | wrapper | Licenses can be generated for
any of the following Host Ids.
2012/08/23 09:56:32 | ERROR | wrapper | The first Host Id is recommended.
2012/08/23 09:56:32 | ERROR | wrapper | Host Ids:
2012/08/23 09:56:32 | ERROR | wrapper | e06995465794 (#1)
2012/08/23 09:56:32 | ERROR | wrapper | 5cd9984e2211 (#2)
2012/08/23 09:56:32 | ERROR | wrapper |
2012/08/23 09:56:32 | ERROR | wrapper | Optional host name for license:OCS
2012/08/23 09:56:32 | STATUS | wrapper | <-- Wrapper Stopped
Help me

Hi Зингельшухе
Please go through this blog article. This should resolve your problem.
http://blogs.adobe.com/connectsupport/connect-9-services-fail-to-start-for-servers-having- time-zone-set-to-east-of-japan/
Thank you
Abhinav

Adobe Flashplayer does not work and crashes no matter what i am using it for, help!!

I updated Firefox to its latest update and had problems with the flash player beforehand, it only crashed a few times but i was still sick of it.
I then updated the Adobe Flash Player to its recent update.
Since then, the crashing has been frequent and recently nothing has been able to stay open when it requires Adobe Flash Player.
I did go to Adobe Flash Player site and tested it for any problems and it seemed to be fine.
I hope its something as simple as a installation problem, my laptop is slightly dated so that may make a difference, too.
Thanks support team! :)

Is it an instrument or an insert effect? My guess is you've been trying to find it amongst the insert effects, where it actually is an instrument, which can only be loaded in the Instrument Slot.

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

It appears that Adobe Air does not support persistent HTTP connections?

As far as we can tell, Adobe Air does not support persistent HTTP connections via KEEPALIVE
Thus a new connection has to be established to the server, making certain types of network intensive applications slow.
Can anyone confirm if this is correct - is there any way to get Adobe Air to support KEEPALIVE and maintain persistent server connections?
a

I am trying to get 3.3 Beta 2 with Flash Builder 4.6 on Windows 7 x64bit to work. But still no luck.
I have Flash Builder 4.6 on Win7 to work no problem.
I have updated the playerglobal.swc to 11.3 using http://labsdownload.adobe.com/pub/labs/flashplatformruntimes/flashplay er11-3/flashplayer11-3_p2_playerglobal_041812.swc
but still run into the same problem below:
I can't go through the steps to create a new Flex Mobile Project because of the following error "Air 3.3 Beta does not support mobile projects".
However, I have no problem creating a Flex Project (Web & AIR) and ActionScript Mobile Project.

DHCP server does not assign IP addresses SG500 firmware 1.3.5

good day collegues
has any of you come across the following issue:
my switch (after upgrading to the newest firmware 1.3.5) does not assign IP addresses to some of the hosts.
after a couple of hours I managed (do not even how) to force my switch to assign IP addresses only to some of the hosts.
still some of them cannot get the IP address and remain with "funny" IP address like i.e. 169.254.100.100
additional info
1. if I boot my switch with the previous version of firmware (1.3.0.6) everything is OK. all my hosts get correct IP addresess
2. the hosts which do not get IP address were perviously entered in stat host table - now removed, ARP cleared, etc, everything many many times rebooted.
I ran out of ideas, could you pleae give me some hints ?
the config below:
config-file-header
SG500
v1.3.5.58 / R750_NIK_1_35_647_358
CLI v1.0
set system mode router queues-mode 4
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end zzz
no spanning-tree
vlan database
vlan 11,13-14
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
no ip dhcp snooping verify
ip dhcp snooping information option allowed-untrusted
ip dhcp snooping vlan 11
ip dhcp snooping vlan 13
ip dhcp snooping vlan 14
ip arp inspection logging interval infinite
green-ethernet energy-detect
no eee enable
arp timeout 1
ip dhcp server
ip dhcp pool host q409
address 10.10.11.2 255.255.255.0 client-identifier 01:00:08:9b:ac:8f:92
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool host PCH-100
address 10.10.11.10 255.255.255.0 client-identifier 01:00:06:dc:41:ef:ef
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool host q209
address 10.10.13.3 255.255.255.0 client-identifier 01:00:08:9b:ac:72:ba
client-name q209
default-router 10.10.13.254
dns-server 8.8.8.8
exit
exit
ip dhcp pool network HOME
address low 10.10.11.1 high 10.10.11.254 255.255.255.0
lease infinite
default-router 10.10.11.254
dns-server 10.10.10.1
exit
ip dhcp pool network GUESTS
address low 10.10.14.1 high 10.10.14.254 255.255.255.0
lease infinite
netbios-node-type b-node
default-router 10.10.14.254
dns-server 10.10.10.1 62.233.233.233
exit
ip dhcp relay address 10.10.10.1
ip dhcp relay address 10.10.11.254
ip dhcp relay address 10.10.13.254
ip dhcp relay address 10.10.14.254
no boot host auto-config
no qos
qos advanced-mode trust dscp
qos wrr-queue wrtd
exit
hostname SG500
line telnet
exec-timeout 0
exit
logging buffered debugging
no logging file
aaa authentication login Telnet local
aaa authentication enable Telnet enable
aaa authentication dot1x default none
line telnet
login authentication Telnet
enable authentication Telnet
password 999 encrypted
exit
no passwords complexity enable
passwords aging 0
username 999 password encrypted 999 privilege 15
ip http timeout-policy 0 http-only
clock timezone " " 1
clock summer-time web recurring eu
clock source sntp
clock source browser
sntp unicast client enable
clock dhcp timezone
ip domain name 999
ip name-server 10.10.10.1 62.233.233.233 8.8.8.8
ip host 999 10.10.13.3
ip telnet server
no service mirror-configuration
no security-suite deny syn-fin
security-suite syn protection mode disabled
interface vlan 1
ip address 10.10.10.254 255.255.255.0
no ip address dhcp
interface vlan 11
name HOME
ip address 10.10.11.254 255.255.255.0
ip dhcp relay enable
interface vlan 13
name DMZ
ip address 10.10.13.254 255.255.255.0
ip dhcp relay enable
interface vlan 14
name GUESTS
ip address 10.10.14.254 255.255.255.0
ip dhcp relay enable
interface gigabitethernet1/10
description "(99) QNAP 409"
switchport trunk native vlan 11
exit
macro auto disabled
macro auto processing type host enabled
macro auto processing type ip_phone disabled
macro auto processing type ip_phone_desktop disabled
macro auto processing type router enabled
mac address-table aging-time 10
ip default-gateway 10.10.10.1
snmp-server set 999 permit

Hi Andbor, please make a backup config of your file, factory reset the switch.
After this, manually configure a DHCP scope without any other configuration.
Just something simple like this
ip dhcp pool network GUESTS
address low 10.10.14.1 high 10.10.14.254 255.255.255.0
lease infinite
netbios-node-type b-node
default-router 10.10.14.254
dns-server 10.10.10.1 62.233.233.233
Verify your machine receive IP address with no other configuration.
In some ways, I'm afraid some of your connections black listed due to the arp inspection.
-Tom
Please mark answered for helpful posts

Newest Adobe Reader not working with 8.1 IOS...Adobe icon does not show when pdf docs are saved...also printing pdf documents take forever. I uninstallled and reinstalled...issues continue

Latest AdobeReader not working properly with 8.1 IOS...Adobe icon does not show on saved PDF's and printing from PDFs takes forever. I uninstalled and reinstalled latest Reader

zoer1,
Adobe icon does not show on saved PDF's
Would you provide more details about the problem? A screenshot would be helpful.
The following FAQ document describes the steps to add a screenshot to your forum message.
How to add a screenshot to a forum message from iPad/iPhone
Regarding printing PDF documents...It depends on the PDF document that you are trying to print. In general, it will take longer to print more complex and larger PDF documents.
If you are willing to share your PDF document (that takes forever to print) with us at [email protected], we can test it with the same version (11.6.3) of Adobe Reader on different iOS versions (iOS 7.x vs. iOS 8.x). Please include the link to this forum (https://forums.adobe.com/thread/1616231) in your email message for reference.
Actual printing is handled by iOS (not by Adobe Reader) via AirPrint over Wi-Fi connection. We've heard from other users about iOS 8 Wi-Fi connectivity problems.
You may also want to search for similar issues on Apple Support Communities.

Adobe Ink does not turn on.

I've had Adobe Ink for less than a week. It worked for a couple of days. Now, the charger flahes red. When not connected to the charger, Adobe Ink does not light up when I hold the button. Any suggestions on how to get Adobe Ink to respond.

hey! I have the similar issue. I only charged once, and it worked fine. Then I kept it for a month without using it, now it always disconnects after a seconds, or sometimes it does not turn on. even right after I fully charged it.
Even when the light shows it turn on, the apps wouldn't recognize my ink.
It's so frustrated.
I really hope the stuff here can be more supportive.

Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?

photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?

Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked.

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work?

Why does Adobe sendnow work and the newest and greatest Adobe Send does not work? I wasted about 8 hours on trying to get Adobe Send to upload 269 files that amounted to 469MB. When it did not work I made a zip file and after a lot of wasted run time that did not work. The first situation gives little indication of when a file is loaded compared to Adobe SendNow. In both cases with Send it failed with a message like only the first 50 can be loaded. When I went and looked none of them had been loaded. With the zip file (I wanted to hide the individual files so they would not be counted) it appeared to work but very slowly and finally said it was done and I went and looked and it had done anything for oever 2 hours except a false "I'm runninng" indication.
Thus, I took a chance with Adobe SendNow and it works great. It never gave me a limit on the amount of files nor on the size of the complete job. It shows me one file at a time when it has finished with the file uploading it. SendNow has never given me any problems.
Why woiuld you want to change the program from SendNow to Send without the newest program being the best, fastest, user friendly program of the two? It just doesn't make sense to me. I suggest that Adobe keep SendNow working until Send is fixed. I would also suggest that SendNow and how it looks be kept, called Send, then modify Send one thing at a time until you get it to the point you need it to be for Acrobat. I have heard nothing good and now I have experienced it that Send is a piece of junk. I wasted most of my work day on giving Adobe the benefit of the doubt to find out I made a very bad decision to trust Adobe to make good decisions on the transfer of a function to another place .... both Adobe's responsibility.without making it painless for your customers that totally rely on you. Don't throw away customer confidence as it is very hard to get it back.

Funny how you answer to "troll". (What's your handle on AT&T forums?)
Yep! Verizon living up to it's contractual obligations by not releasing updates. Caveat emptor!
I think there are some reasonable expectations here to keep customer's happy. When one carrier offers upgrades there is an expectation the same will happen across all the carriers. We have seen that except Big Red.
Verizon could have said the update is in MS court months ago and stilled the voice of the disgruntled, or at least redirected it, but instead chose to be silent. Not for market share but for partial blame I think.
We will have to agree to disagree since you only see Terms & Conditions and I, see customer satisfaction.

Adobe Reader does not recognize file name (filename10.5.11.pdf) but does in Adobe Standard 9. Why?

I post documents to our Intranet site and found out recently that Adobe Reader does not recognize certain file names in PDF files. For instance, when trying to open a PDF file with the name
filename10.5.11.pdf in Adobe Reader, the web browser will not open the PDF and the display is blank.   When I'm using another computer with Adobe Standard 9, I do not have a problem opening the file.
I would like to know if anyone else has had a similar issue and why Reader will not recognize the file name and Standard does.

The version is Adobe Reader 10.1.0    I will request the latest version
and let you know if that fixes the problem
Actually I had changed the name of the file so our associates could access
the file (changed the . to a hyphen) It still made me wonder why Reader
wouldn't open it at that time.
Thanks again for you assistance and I will let you know if this resolves
the issue.
Regards,
Susan
From:   Ankit_Jain <[email protected]>
To:     SusanPleso <[email protected]>
Date:   10/19/2011 12:56 AM
Subject:        Adobe Reader does not recognize file name
(filename10.5.11.pdf) but does in Adobe Standard 9. Why?
Re: Adobe Reader does not recognize file name (filename10.5.11.pdf) but
does in Adobe Standard 9. Why?
created by Ankit_Jain in Adobe Reader - View the full discussion
Hi Susan,
Thanks for providing the information.
Could you also let me know what is the exact version of Adobe Reader on
your system. You can check the same y clicking on Help > About Adobe
Reader X.
In case its not 10.1.1, please try updating to the latest version and see
if the problem persists.
Also, does any other PDF with a different filename open in Internet
Explorer correctly?
Thanks
Ankit
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3979020#3979020]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3979020#3979020]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a

Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there are no updates

Hi,
CS6
Van: R_Kelly [email protected]
Verzonden: maandag 16 september 2013 18:42
Aan: Hans van Sloten
Onderwerp: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
Re: Adobe Bridge does not accept the NEF files from my new Nikon D800. I use the latest version, there a
created by R_Kelly <http://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5686078#5686078

Adobe connect does not assign me as a host. What to do?

Similar Messages

Maybe you are looking for