Adobe form MSS PCR senarios not working with Portal SSL

Hi All,
we have implemented MSS PCR senarios Nw04 with ERP2004 system.
every thing is working fine when use http protocal for portal acess.
Now we try to implement ssl for portal. so started implemnation and done in portal side, after that when try access any senario forms , The adobe form is not opening for editing, its throwing error
<b>The initial exception that caused the request to fail, was:
   java.net.ConnectException: Connection refused: connect
    at java.net.PlainSocketImpl.socketConnect(Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
    at java.net.Socket.connect(Socket.java:461)
    ... 47 more</b>
its very urgent anybody can help out this, what settings ot be done on R/3 server and Portal and ADS server
Thanks in advance
Gopal

Hello Gopal,
You would only need an https connecion between the browser and the portal server if you are only concerned with the MSS applications. You need to have SSL configured from the portal to ADS server had you implemented some custom scenarios like certification, digital signature etc. But, considering your MSS issue, you do not need to worry about it untill and otherwise your landscape demands you to do so for any security reason.
Well, you might have already gone through the following link, incase not, please go through the link to find out more on how to confugre SSL on the j2ee engine:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm<a href="http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm</a>

Similar Messages

Adobe Photoshop Elements 12 does not work with Yosemite 10.10

My Adobe Photoshop Elements 12 does not work with Yosemite 10.10 nor does my Premier Elements 12. When I try to start them up I get the error message. After uninstalling and reinstalling a few times its still the same. Strangely enough PSE 11 seem to work with Yosemite. I uninstalled my Premier Elements as well and it behave the same way. How do I get a new copy of Premier Elements 12 to reinstall?

Just to further test what is happening to my iMac on Yosemite is I downloaded the trial version of Photoshop CC and when I go to launch it it gives mr the same error message as when I try to launch PES 12 or Premier Elements 12. So whatever the problem is it involves all three and so upgrading to Photoshop CC doesn't even help. Could there be an Adobe file damaged or missing somewhere that is common to these and yet does not effect Revel and Lightroom?

Adobe Form Exit Button does not work

When I select a PCR from the Portal and review the Adobe Form - when I click on the exit button - it does nothing.
How can I fix that problem?

Hi
are you using standard MSS and Homepage frame work for PCR form or created your own iview in portal?
what is ther version of Software using?
thanks
Gopal

Flash, Adobe Air, Time Machine, Safari not working with Snow Leopard

Really need some help with this.
Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
Attempted to install Air again, same message.
Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
Using Macbook Pro, 2g memory, 80g hd, with 42g free.
Backed up on ext. HD,
Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
Can anyone give me any ideas what I can do.
Thanks,
Z

After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
I created a new admin account and everything seems to be working. Well almost.
a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
*So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
*What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
I feel like I have a new and functioning Mac again just around the corner.
Looking for your help, thanks,
Z

Adobe form translation changes do not work for second time

Hi Team,
i am translating adobe form from EN to TR and it was successful for first time and all the changes were working correctly then again i have translated all the texts and checked however then it was only translating fields which were translated in first try.
I am really confused and please help me here i am not really sure what exactly to do .
i have checked below note however not getting what to delete exactly .
i have acttached the note data below please help <removed by moderator>.
1294146 - Problem translating rich texts in PDF based forms (Adobe)
Message was edited by: Manish Kumar

HI Lande,
There is nothing to delete. Here is what you should do:
Following procedure applies to both symptoms:
1. Open the corresponding form in the original language in change mode in Form Builder
2. Choose the Layout tab of Form Builder to open the form layout in Adobe Designer.
3. Identify and select the concerned text element in the layout so that it will be highlighted in the hierarchy tree of the Adobe Designer
4. Go to the XML Source tab of the Adobe Designer
              The XML source shows the section of the selected form element.
     5. Go to the appropriate <exData/> element and delete the occurrence of attributes
     xft-xliff:id or xliff:rid
6. Leave the XML source tab and save the changes.
7. Activate the form.
Regards,
Ashvin

Adobe acrobat add ons does not work with latest firefox

I have been using firefox because of my adobe acrobat add ons.. I alwasy convert pages to adobe pdf using my acrobat. It works with firefox 4.0 but it does not work anymore with latest firefox.
Can you help me with this?

Maybe if you read about privacy, policy and sharing of data you'd change your mind. But it was reported that it appeared to work if you used something like the "Add-ons Compatibility Reporter".
You can force 5.0 "compatibility" with the "[https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Add-on Compatibility Reporter]" extension, or with [http://kb.mozillazine.org/Extensions.checkCompatibility extensions.checkCompatibility] using about:addons.
* http://kb.mozillazine.org/Problematic_extensions

Adobe Connect Pro 8 Plugin not working with Moodle 2.0

Hello, Last year we integrated Adobe Connect Pro into our installation of Moodle 2.0. On Friday our Adobe Connect Pro account was upgraded to 8 so we installed the new plugin and now it does not work in Moodle.
Is there any news on why the plugin is broken and when it will be fixed? We use Adobe Connect Pro several times a week so we need it working ASAP.

As mentioned on the main product page ( http://www.adobe.com/education/products/adobeconnect.html ), many of the integrations with LMS systems like Moodle are developed entirely by Adobe partners. In the case of Moodle, here is the partner that created the integration. They will be responsible for any updates.
See the list of LMS solutions here and links to their creators here: http://remote-learner.net/adobeconnectpro

Servlet forward not working with portal and oc4j

Scenario: page1.jsp, page2.jsp, MyServlet
Page1.jsp posts a form to MyServlet which then does some processing and forwards to page2.jsp.
Tests:
Works fine as a standalone app under oc4j.
Does not work as oc4j-driven portlet under latest portal. Specifically, it conks out on the forward.
Question:
Why?
What is the suggested workaround?
Michael Mogley
Software Engineer
LRN, Inc.

James, thanks for responding but you are misunderstanding the problem. I have been able to do multipage and form-submit portlets as you describe for a long time. The issue is I am not able to use the jsp-forward directive within a validation servlet when using oc4j with portal. Here is what I'm trying to do in pseudocode:
EntryPoint.jsp
1. Enter form data.
2. Submit form to MyServlet.
MyServlet
1. Validate form.
2. If valid, <jsp-forward page="success.jsp"/>.
3. Else, <jsp-forward page="failure.jsp"/>.
The above works fine when used in an app running on oc4j outside of portal. It does not work when the same oc4j app is portletized. By the way, the portletized app WILL work if I change jsp-forward to jsp-include. So the problem is obviously in the forwarding.
Michael
I would try looking at the samples in the PDK-Java V2 that show how to do form input and multipage behavior. The form input shows you how to make a form in a portlet that when you submit it, the entered values appear in the portlet. The multipage portlet shows you how to have a portlet display one page and then when you click on a link, it shows you the second page.
It may make sense to copy the same code used for the samples and just tweak it to create a form that passes values from page1 to page2.
For more info on V2 parameters, see the article "A Primer on Parameters and Events" in the PDK-Previews (for subscribers to Developer Services only). You can also see the V1 article called "Understanding the Parameter Passing Portlet" for more info on parameter passing with portlets in V1.
James
James

Webdynpro for ABAP - interactive Adobe form - drop down lists not working

Hi all,
I'm trying to create an interactive form for a client using webdynpro for ABAP and I've viewed the demo "Create SAP Interactive Forms by Adobe with Web Dynpro for ABAP" by Thomas Jung, but when I implement it the form following similar steps the form is not interactive.
In the properties of the "InterativeForm", I've tried clicking the "enabled" flag both on and off. I've also tried setting the "displayType" property to both "ActiveX" and "Native". But none of this worked.
I though my problem might be with Adobe reader so I switched from 8.0 back to 7.0 but this didn't make any difference either.
The system we are using is NW04s WAS 700. Any hints would be greatly appreciated!
Thanks,
-tom

Thanks for the suggestion Dezso. I've downloaded a newer version of ACF as indicated by the OSS note and installed it. I'm still having the same issue.
My basic question is what options should I be using in the form and on the InteractiveForm component? It looks like because of the evolution of the product there are multiple options available. I recall reading somewhere that as of a certain SP level we should have ZCI (zero client install) available. The would be our preference. It will be a support nightmare if each user needed a manual download of ACF.exe installed.
Should I click the "enabled" flag on the InteractiveForm object? When I create the form should I use the "Native" drop down list or the one from the "Active X" tab? I would like to use the "List Box" control on the form as well but it is only available in the "Standard" tab. So does that mean I can't get the selections from a "List Box"?
Thanks,-tom

Adobe form submit by email not working in Safari

I created a form in Acrobat and set it up for the data to be returned in pdf by email. I had to do this b/c the receiver doesn't have acrobat. I am hearing from the user that submit by email button doesn't work in Safari (the user was able to get it to work in IE). Is there something I need to do to my form or does the user need to do something in Safari?

E-mail submission is client sensitive (this even occurs with HTML forms that use mailto). In Acrobat or Reader on Windows, it uses the default MAPI mail client (if one exists - one of the problems). I have no idea what the requirement is on a MAC, but probably something similar. You need to figure out how to do a web submission to resolve the problems.

Adobe photoshop 5.5 does not work with Yosemite

When I upgraded my Mac to Yosemite, Adobe photoshop ceased to work. Is there any way of fixing this problem?

Yosemite is known to break CS5 installs, so there are two ways to fix this:
Install this Java for OS X 2014-001
If that fails, reinstall CS5.5
Gene

P6spy does not work with portal 8.1 sp3

Needed to troubleshoot some JDBC errors yesterday (table or view does not exist) so I installed p6spy for my portal pool . This always worked in the past - have used p6spy many times succesfully with v6 and v7 projects. When I try to access the portal desktop though I get a strange error about no locale for region null. Put back the Oracle driver and all is well again.
Anyone else encountered this problem or know what might fix it? Do I really need to create a portal desktop for a locale named null?

That means there is no camera raw plugin installed.
Is this the camera raw 5.7 you installed:
Adobe - Photoshop : For Windows : Camera Raw 5.7 update
You unzipped the download by right clicking on the Camera_Raw_5_7_updater.zip and selecting Extract All
And then right clicking on the Setup.exe and selecting Run as Administrator

Adobe for MSS PCR forms with 46C back-end???

Hi all,
A quick question - is it possible to use Adobe document services for PCR forms when the back-end R/3 system is 4.6C? Or do we need to be on Enterprise or ERP?
From what we've seen it appears that the ISR functionality in 46C is not enabled to allow selection of an Adobe form - thus ruling this form option out for 46C PCRs, meaning we'll use JSP forms instead.
Can anyone confirm whether this is the case, and/or provide details of what they have done for PCR forms in 46C?
(we do have a WAS 6.40)
Many thanks
Ross

Hi Markus,
Your response does not line up with information that I have found on SDN:
10. Can Interactive Forms work within, for example, an SAP R/3 Enterprise or 4.6C system? Is it alternatively possible to run an external SAP Web Application Server 6.40 instance with a lower-release SAP system?
Interactive Forms is shipped as a part of SAP Web AS 6.40. SAP Web AS 6.40 can be connected to lower-release backend systems to exchange data (using RFC).
If you want to use forms in interactive scenarios, you can use technologies such as an RFC connection to exchange data between your application system (for example, SAP R/3 4.6C) and the SAP Web AS 6.40, which includes the required Adobe technology.
If you are working with high-volume printing scenarios, consider that the customization of print forms is optimized for use within SAP applications.
This means:
·At design time, you create relations between application data and form objects based on a common SAP dictionary.
·Form templates are available within their corresponding SAP applications. Templates are delivered by SAP only as part of an application.
·Performance is optimized for bundled systems, i.e. an SAP application system and its technological platform.
SAP recommends that customers
·Use the same system for application and form printing services in high-volume scenarios
·Work with SAP-delivered form templates in the corresponding application. (If you use SAP NetWeaver for form printing services only, you will need to build your scenario from scratch.)
Please note: If you are planning a high-volume printing project using SAP Web AS 6.40 and an existing, lower-release SAP solution, please turn to your SAP consulting contact for detailed guidance.
If I am reading this correctly, you just need to install WAS 6.40 with the Adobe Services on it and then cerate an RFC to the 4.6 SAP system. Is this correct?
Regards,
Todd

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Adobe cs6 apps not working with OS X Yosemite

Illustrator and After Effects are not working with OS 10.10.1 After Effects opens into and is stuck in Render Queue. Illustrator says it need a previous version of java. Im a little nervous about going with a older version of java on my new machine
Ps, Pr and Au seem to be working ok so far.
Any Ideas??
Thanks, Mike

I am having the exact same problem with After Effects (13.1.1.3) OSX 10.10.1. Renders lockup in the render queue hanging on frame 2.
Whats the deal Adobe?
If your going to push updates to customers all the time, your software has gotta be solid.
I now have a client project that I can't render and I can't open in previous versions of AE either.
Yours truly,
Screwed.

Adobe form MSS PCR senarios not working with Portal SSL

Similar Messages

Maybe you are looking for