ADOBE Forms attachment to SAP object (Order) and updating it

Hi,
I have the following scenario:
I need to attach a PDF document to a PM order. This can be achieved using the standard feature of attaching documents to SAP Objects. The requirement is to open the same attached document and update it by entering some information ( for example checking some check boxes) . After updating the document, it is again attached back to the PM order.
I would like to know if I can use Adobe forms in this scenario to:
- Design the PDF as per customer requirement
- Make changes in the PDF. (Please note that this data is not saved in any SAP application database)
- Attach the updated PDF again to the PM order
Thanks,
Arvind Kulkarni

Hi Arvind,
Please go through the below blog:
Demystifying Attachments in PDF in WD Abap Application Part II
Regards,
Vaibhav

Similar Messages

Integrating Dynamic Adobe Form with BSP: SAP Objectives setting &Appraisal

Hi all,
My users ask me whether wecan use Adobe Form to replace SAP standard BSP appraisal form (generated by HAP_DOCUMENT).
I konw that it's possible to integrate Adobe Interactive form with BSP.
But my Adobe form must contain dynamic table, with ability to insert/delete row on the form. This is just like what's there when you can adding objectives by client scripting in SAP OSA.
Please tell me if the integration of dynamic Adobe form with BSP is possible?
(We are on ECC 6, EPH2).
Thank you so much.
Giang

Hello,
have you worked with the following document?
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d0e58022-2a39-2a10-69a8-c1a892e2b3f4&overridelayout=true
Did you try to develop a demo version of the form to try if it is possible to do what you need to?
Do you plan to replace "only" the standard non-Adobe form or to develop a whole custom application?
PRovide more details about the steps you´ve tried and we can solve this out. Regards, Otto

Adobe Form called from SAP Portal, not executing interface global init code

Hello!
I have an adobe form called from both R/3 and SAP Portal and I need to show long text dinamically calculated.
The deal is at the SAP Portal execution, as scenario characteristics don't allow string definitions, I'm using 255 characters tables (QISR_TAB_TYPE), that I'm trying to convert inside form interface (Global init code).
The problem is that the interface global init code is being executed when the form is called from R/3, but it is not at SAP Portal.
Does anybody know how to manage this? It's kind of a problem that the BAdi method int_service_request_init doesn't allow types over 255 characters... and if it is not possible to access the form interface code section (maybe there's any way)... i need to find some code section where i can convert tables before the form context is filled!!
Thanks a lot!!
Regards,
Diana.

Hi,
have you searched on SCN? There are some threads with same problem such as [this one|/message/9270216#9270216 [original link is broken];. There is more threads. They may help you to solve your issue.
Cheers

Can any one please send me study material on ADOBE forms (used in SAP)

Can any one please send me study material on ADOBE forms (used in SAP).

Hi,
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/bwp_interactive_forms_adobe.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm

Can Adobe forms developed under SAP NetWeaver be used in SAP Rel. 4.7 ?

Hello,
I was asked by a customer whether it is possible to use an adobe form in SAP Release 4.7 which was developed in SAP NetWeaver or not.

Hello,
I think the key component you need for Adobe forms is ADS (Adobe document services) which you will only get with Netweaver.
Please see the following link for SAP recommended environments for Adobe forms:
http://help.sap.com/saphelp_nw04s/helpdata/EN/e4/9e7cf580ac401086a172a70e3c038b/frameset.htm
Hope this helps,
Harman

How to use KAUF_AUFNR_CHANGE to change Process order and Update a field

Hello ,
I am working on 4.6C system and I hve a requirement to change Process order and Update a field value passed from a ABAP Program. I am looking for suitable Function modules or Bapi ( available in 4.6c) .
I have come across FM KAUF_AUFNR_CHANGE . Would appreciate any guidance on how to use the FM in my program and Update a field in the Process order.
Many Thanks!

All the importing parameters of this function module have a striaght structure of the transperent tables...
i have checked the code and it has a modify statement based on the importing parameter..
pick one record in databas and pass it to the importing parameters, with some values changed...
i think that should work
what values to pass the import values of FM -KAUF_AUFNR_CHANGE.
Edited by: ssm on Aug 4, 2011 7:19 PM

How to attach a WebDynpro Adobe form to backend Business Object?

Hello,
I would like to know if anyone has created an Interactive Adobe Form, and then after the user has filled it out (online, via WebDynpro view), attach the pdf form to an SAP Document, for example, Order, Purchase Order or Contract?
I know how to create the WebDynpro Interactive Form, and I then have the pdf object in context attribute of WebDynpro. But am not sure how to do the next step of taking that pdf and attaching it to the SAP Document.
Any suggestions or code samples would be greatly appreciated.
Thanks,
Colleen

The interactiveForm UI element has one action called onSubmit. This action is triggered when any server event occurs within the Adobe Form itself. So if you place a submitButton from the Web Dynpro Native (assuming you are using ZCI forms) within the form, it will automatically trigger the onSubmit action and WD event handler.
Here is a video that shows the process - although it is a little bit older and uses ACFx forms. You would want to use the new ZCI form approach. The general process for linking the events is the same however.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3

Adobe Forms - Translation error (Omitted Objects (Could not be Converted):)

Hi Experts,
I have developed an invoice(adobe forms) in my development server and translated this invoice for FRENCH(F) and moved this request to Quality server and now i am trying to translate the same form for GERMANY(DE) in dev server, i am getting a message when i am saving the object "Omitted Objects (Could not be Converted):" and the text are not changed (which means english text remains not changed while translating into DE)
i hope it is not related to SAP Logon GUI problem, because i developed a sample form and i tested it for some languages(while translating, it has not pgiven any error message like "Omitted Objects (Could not be Converted):". am using SAP 710 release and patch 14)
Please help me to solve this problem
Thanks and regards
Vijayendran.R

HI Priya,
Thank you, i ahve implemented the same..
it is working fine..
Thanks & Regards
Vijayendran.R

Adobe Form attaching it to Standard transaction

Hi Experts,
I've developed a Adobe Form & Interface for Purchase Order Now I want to attach it to the purchase order Transaction ME22 for print preview & then for print.How to attain this, & where to attch my program?
Thanks in advance.
Your efforts will be valued.
Regards
Hemendra.

Hi,
Normally the purchase order printout is associated with NEU output type. You can see this from header->messages tab in Me22. Once you are sure about what output type you are going to use, then you can configure the output type via SPRO transaction. MM->purchasing->Messages->Output Control-> Message types->Define message types for purchase order.
there you can enter your program name , form routine in "Processing Routines" node . Once you ensure that there are condition records entered for this to happend , then whenever a purchase order is created , the output type is triggered automatically and you end up having a printout available for your use as required.
Regards,
Raymond.

Problem with Web Dynpro ABAP Adobe form Access via 'NULL' object reference

Hi All!
I'm a beginner of Adobe form.
problem 1:
I tried to display data in Adobe interactive form according to the tutorial :https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/7783. [original link is broken] [original link is broken] [original link is broken]
I checked every step, but unfortunately it reported an error: Access via 'NULL' object reference not possible. I found that the error happens when trying to get element of the context node.
I also have such problem when I was studying the tutorial https://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro.
problem 2:
I can't input any data in input box or click any button even if I selected the property 'enabled' of the interactive form while my colleague can do it on his computer. Does it means that there are some thing wrong with my adobe reader?
Hope anyone could save me,
Thanks & Regards,
Murloc

>
tomcat123 wrote:
> Hi All!
> I'm a beginner of Adobe form.
> problem 1:
> I tried to display data in Adobe interactive form according to the tutorial :https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/7783. [original link is broken] [original link is broken] [original link is broken]
> I checked every step, but unfortunately it reported an error: Access via 'NULL' object reference not possible. I found that the error happens when trying to get element of the context node.
> I also have such problem when I was studying the tutorial https://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro.
Check that you have entries in the Table MARI. else you will get this message.
> problem 2:
> I can't input any data in input box or click any button even if I selected the property 'enabled' of the interactive form while my colleague can do it on his computer. Does it means that there are some thing wrong with my adobe reader?
>
Compare the adobe live cycle version. it will work fine with 7.0/7.1
> Hope anyone could save me,
> Thanks & Regards,
> Murloc

Adobe Form Translation error Omitted Objects (Could not be Converted)

Hi,
I am new to this forum. I have an issue with Adobe form Translation. Through SE63 (or through the form translation itself) , whenever I try to translate into any language it gives me an error " Omitted Objects (Could not be Converted)". And the translation doesnt get saved. I tested with other forms and the translation works perfectly fine. Its the problem only with this particular form. In fact any change gives error. For e.g. I copy the English the translation to the Greek or the Hungarian one, and if I delete a character and save it it gives me an error.
Please help me if you have faced similar issues have any knowledge about it.
Thanks in advance
Shivam

Hi David,
Thanks for answering my query. I had installed a new patch and even that did not work. However I managed to make it work. I dont know if its the correct way but it worked for me. On furthur analyses I found out that the problem was with XML tags. This was throwing an error. Also, on looking at the translations I Observed that there were few close tags "</trans-unit> " which had no open "<trans-unit>" for them. I simply deleted the extra close tags and the translation worked fine after that.
Point to be noted is that the extra tags were not there in the original english translation. They only appeared when I tried to change the Greek or Hungarian translation and saved them.
Hope it helps anybody.
Thanks.

How to debug Adobe form attached to Web Dynpro for ABAP

Hi,
My developer has created an adobe form and rendered inside a Web Dynpro page in the SAP Portal. It communicates with the Web Dynpro framework in the backend SAP system (Web Dynpro for ABAP).
My question is, how would I know what infotype access this form requires, in the form of backend authorization role? Is there any way (not trace, ST01) to debug Abobe form on Portal or in backend SAP system?
Thanks,
Karan.

Julius Bussche wrote:
> I am not sure whether this will work in this case, but principally if your trace is recording a * value for a field in an authorization check, then it must be defined somewhere, and there is an option in the trace file to jump from the check to the source code location where it occurred.
Yes, that's possible since the trace also records the information on the ABAP source code location where the AUTHORITY-CHECK statement (or other ABAP statements which internally trigger authorization checks) is executed. If I'm not wrong then there is a button (in ST05) which allows a direct source code navigation. Alternatively you might just click on the ABAP source code information displayed in the ST05 trace results (for recorded authorization checks).
Cheers, Wolfgang

Adobe form data --- Backend SAP table

Am working in Webdynpro using Java. Once the user fills in the adobe form and clicks submit, I want to post/write that information to backend SAP table. Any inputs or leads?

HI,
Can you please check the following document?
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/how-to%20guides%20-%20rig%20official/nw2004/webas/how%20to%20create%20online%20and%20offline%20forms%20in%20web%20dynpro.pdf
I couldn't find such example. But we need to create a RFC function module to update table. This function module we need to call it when click on SUBMIT button on the INteractive Form.
Hope this helps.
Update: Please also check the below link.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/d1088b7e-0c01-0010-c78e-984c0537e3ec [original link is broken]
Thanks
Ramakrishna
Message was edited by:
Ramakrishna Prasad Ramisetti

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

Error while downloading adobe form layout in sap

Hi all,
When I try to download adobe form it is showing the following pop up boxes and not allows me to download the layout .Please suggest me how to solve this issue.
Thank You,
Suneel.

Hi Suneel,
it seems like its an issue with permissions.
Make sure your user has permission to write (save) a file to your computer.
Adam

ADOBE Forms attachment to SAP object (Order) and updating it

Similar Messages

Maybe you are looking for